4402 delivered without SFP 1000BASE-T controller

Similar Questions

• When I send a mail it remains in the outgoing message, while in fact it will have been delivered without my knowledge

  When I send an e-mail message, I noticed that he stayed in my "Outbox". But in reality it would have been delivered. While I try to send it again it will be delivered without my knowledge, and the recipient will be received in several numbers.

  You left out the important part. What type of program you use for mail?
   
   
  If it's Outlook Express, you have a dbx file corruption. Create a new Outbox and sent items folder.
   
   
  Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
   
   
   
  To avoid this in the future:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3   

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• can you connect the SFP - 10 G - SR low-support to SFP 1000BASE-SX?

  Hello world:

  today I use the SFP + 'SFP - 10 G - SR' in Cisco Catalyst 2960 S-48TD-L connect to the SFP 1000BASE-SX to 6509 WS - X 6724-SFP module.

  the port setting is master, but they do not work, even the light don't flush. Then, I also use the SFP 1000BASE-SX to replace SFP + SFP - 10 G - SR in

  2960 S-48TD-L, then they cany working.

  I look to the top of the cisco data sheet, there is no roadmap to satament database 10G sfp + can't low support 1 G sfp. So, I want to confirm the problem.

  Otherwise, the 10 FPS + can only use for 10G SFP +; can't go down the suport 1 G SFP.

  This means: If you want to use the 10 G SFP + the other old device also need to replace.

  Thank you ~ for your help!

  Hi Marvin,.

  I found this conversation today, because I'm looking for an answer on a question similar to the question that Jerry asked, at the opening of this discussion.

  So my problem is this. In a certain place, I need two 10 GB and a connection of 1 GB on an optical cable. To cut costs, I tried with WS-C2960X-48FPD-L, but because it contains only two ports of SFP +, I tried with two WS-C2960X-24PD-L which will be connected with the battery modules.

  Then, having two WS-C2960X-24PD-L, I have 2 x 2 ports SFP + 1 GB. There are two open questions:

  1. can I put 1 GB transmitter SFP module SFP + port (that I have a connection of 1 GB at remote site)?

  2. can I use two switches to 24 ports mentioned 2960, in a way that I use one of them for the two connections of 10 GB (using ports SFP + 10 GB connection) and the second member of the battery so that we (2 available) port SFP + is used to 1 GB SFP connection (using the SFP port + as mentioned in question 1)?

  I'm not sure if your previous statement covers my questions, because it is not clear if the 1 GB SFP transceiver can be inserted in the port SFP + WS - C2960X - 24PD - L (or any other a port SFP switch +).

• Can I use Express Media Player on Satellite Pro M70 delivered without it?

  Hello world

  I have a portable Satellite Pro M70 which has not been installed with Express Media Player. In addition, my recovery CD too are not the Express Media Player software on it. Is there a way I can download this Express Media Player and even install on my laptop. If so can someone let me have this link download and any other procedure for doing the same thing.

  Thank you
  Marzi

  I put t agree with the user above.
  Microsoft Windows player is not the same as the Express Media Player, which is sometimes delivered with Toshiba laptops.
  As far as I know, this software cannot be downloaded and it s version an OEM if it s preinstalled on your laptop.
  In this forum, you will find some comments on this topic.
  To my knowledge, you cannot obtain and order the CD of Express Media Player if this application has not been delivered with your laptop.

  Unfortunately, nothing to do.

• Qosmio F60-111 was delivered without the recovery disks

  Dear support team,

  Yesterday 31/07/2010, I went to the distributor of Toshiba in Saudi Arabia and I bought the Qosmio F60-111, Jarir Book Store.

  When I got home, I found that the package do not have the recovery disks, or the operating system.

  So please I want to know is the problem?
  Buy this laptop powerful and to be surprised that they don't have a recovery disc?

  I checked the package so many times and I could not find any disk!

  Please let me know if this is normal or I don't know.
  According to me, I'm being scammed: S

  Anis.

  Hi mate.

  First of all, you should take a look in the user manual of your Qosmio F60 and read the entire manual carefully.

  You will find information on the laptop and the recovery disks.
  The point is that you can create a clean recovery disc using the Toshiba recovery disc Creator called preinstalled tool.
  But all this information is in the user manual too.

  Welcome them

• Satellite R630 were delivered without the disks

  Hi guys,.

  I bought a laptop R630 and it came with Windows 7 pre-installed but no CD / DVD installation.

  I wonder what what do I do if I have to re - install a new copy of Windows 7 after a year or more.

  Where can I get the installation CD of?

  Hello

  I recommend reading the manual first.

  Additional I recommend checking a thread here in the forum; in particular the Toshiba product recovery forum.

  The disks were not provided because you can create this disk using Toshiba reocveyr disk creator.

  Welcome them

• Cisco SFP module name

  What is the difference between the module two next?

  SFP-GE-L = vs SFP - GE - L, we have = to sigh at the end and others are not.

  http://www.Cisco.com/c/en/us/products/collateral/interfaces-modules/Tran...

  SFP-GE-L	1000BASE-LX/LH SFP (DOM)	GLC-LH-SMD	1000Base-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM	-
  SFP-GE-L =	1000BASE-LX/LH SFP (DOM)	GLC-LH-SMD =	1000Base-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM	-
  SFP-GE-S	SFP 1000BASE-SX (DOM)	GLC-SX-MMD	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM	-
  SFP-GE-S =	SFP 1000BASE-SX (DOM)	GLC-SX-MMD =	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM	-

  For all Cisco SKU (Stock keeping units), the '=' at the end means a piece of spare or ordered separately article.

  Without a '=' means usually the exact same item is ordered in a parent configuration - for example, a SFP as an optional part of a module switching.

  They are exactly the same physical part.

• 10G SFP + with DOM

  Hello

  Can someone tell where I can download the Cisco 10 G SFP + with DOM data sheet? I could find one, but it does not include details of digital optical monitoring (DOM). Unlike in 100Base, care data SFP SFP 1000Base, it includes information on the DOM.

  Help, please...

  Thank you

  Shawn

  First link of Sunil will work better for most people without any partner in the URL. for example,.

  http://www.Cisco.com/en/us/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html

  The main 10GBASE SFP + form indicates these transceivers support digital optical followed in the main features section right at the top:

  http://www.Cisco.com/en/us/prod/collateral/modules/ps5455/data_sheet_c78-455693.html

  There are no more details, but I can testify that they have it and it works fine. I used it several times.

• vCenter device SCSI Controller

  Hello

  All the world looked at changing the vCenter device SCSI controller? I find it strange that the device is delivered without using the paravirtual SCSI controller, we saw good returns when upgrade to that and I would like all areas if possible (called limits taken into account).

  I appreciate the device is distributed "such what ' and change of way would probably cancel all support, but I'm still curious to know if anyone has tried.

  Looks like I'm the only one with something to add...
  .

  End a call with a VMware engineer who confirmed that the PVSCSI controller is not supported on the existing device of the vCenter. This is because it is running SUSE Linux 11 without service pack 1 is required to support.

  Obviously, the engineer could not comment on future developments, but perhaps a new version of the device will run on a later version of SUSE that supports the adapter PVSCSI.

• Can I format HARD drive and reinstall Windows 7 on the Qosmio F60 without CD

  I think my hard drive is faulty on my F60 Quosmio so I want to reformat the hard drive to see if that will fix it. But I don't have the original packaging and the information with me at the moment so I don't know if it came with a windows 7 CD or not. Whatever it is, I don't have the CD.

  I found on the net that most manufacturer who deliver without CD include a "recovery partition" or "factory image partition" which you can access during startup. Anyone know if the F60 Quosmio comes with a CD or if she has this recovery partition or partition image factory? Or do you know if there is a way I can check if my computer is it?

  If you have more information about the formatting of the hard drive and reinstall windows 7 without the CD please let me know.

  Thank you.

  The laptop came with a Windows disc, because there is a Toshiba recovery disc Creator called tool which create the recovery disk.

  The recovery partition was available and it allows you to recover the laptop without the use of the recovery disk, but it does not work if the HARD drive has failed.

  Here's a nice HowTo on HARD drive recovery
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  So, if you n t have a recovery disc and can not recovery Notepad using HARD drive recovery, then you have two options:
  -You will order a new recovery disk
  -You must install Windows operating system using a disc of Microsoft

• FS728TP Ports SFP switch

  Will an addoncomputer.com JD118B-A0 (MMF SFP 1000Base-SX in a FS728TP switch function?

  Thank you for the input...

  Will try the AGm731f-A0

• Drift upward a Xbox controller (right Stick)

  I was just messing around on Dark Souls recently when I realized my camera was moving slowly upwards. I decided to fidle with the analog stick and he stopped for a bit, but then he did it again and now I can't stop it. How can I fix without holding two my controller?

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• Xbox controller does not work

  One of my Xbox controller does not work.

  When I turn on my Xbox and I opened (for example) Minecraft.

  He looks up at the sky without touching me same controller!

  Help, please!

  Ask here:

  http://forums.Xbox.com/

  or

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  See you soon,.

  J

  

• Photosmart all-in-one without startup ink cartridges

  Photosmart all-in-one came without the startup ink cartridges and will not start with regular size cartridge.

  If your printer is delivered without cartridge to start, you will need to contact technical support. The technical support number is 800-474-6836