446476-001 what cpu can support?

Similar Questions

• What type of CPU can support the FMLE3 to encode to h264 format

  The Signal is yuv or pcm data stream, I use the fmle3.0 for encoding in h.264 format.

  Once started.the CPU price of public services will go up to 100%.

  I want to know, what kind of CPU can support the live stream.

  In other words, my requirement is encoding a live stream that the price of public services of cpu is less than 30%.

  Here are the system requirements:

  http://www.Adobe.com/products/flashmediaserver/flashmediaencoder/systemreqs/

  Other people may have real experience to share...

  Jody

• Aspire AX3995-UR20 what CPU are supported

  Have an AX3955 UR20 with Intel i3 CPU has a card mother DIB75L-Lena Socket 1155.

  Unable to find information on what other Socket 1155 CPU are supported.  This will support an i5 or i7 quad core CPU?

  Thank you

  Thank you!

• Satellite A200-1ZB: what CPU max can I use?

  Hello..

  I have Toshiba Satellite A200-1ZB model with processor Intel Pentium Dual-Core T2370 @ 1.73.
  I was wondering, what processor max speed is supported by this model? Anyone know? (without overheating of course ;)

  Specs. (HWiNFO32)
  Processor: Intel Pentium Dual-Core T2370 @ 1.73, FSB:533 MHz, L2: 1 MB
  CPU platform: Socket P Μpga478 (Micro-FC-PGA) / mBGA479 (Micro-BGA)
  Motherboard Chipset: Intel GM965 (Crestline-GM) + ICH8M
  Support FSB frequency: 800 MHz
  Memory: 2 x 1024 Samsung 667 MHz (PC5300)

  Upgrading CPU is always risky, and in my opinion, no one can tell if the laptop would have functions properly after these updates.
  Another problem may occur.
  First the BIOS of laptop computers could not handle the new processor or there may be a compatibility problem should be know that a CPU creates stronger more heat dissipation that could lead to overheating or unstable work.
  Last but note would less affect these updates and void your warranty!

  But if you want to know what CPU can be used and then check the properties of the chipset on the Intel page and you should find the information on compatible CPU s

  See you soon

• What is more, processor Satellite C660-2LK that can support?

  Hello

  I was wondering if someone would be able to help me get a new processor.
  I was looking at processors intel and made a thread asking if I could get a certain processor, I got a response to which processors intel made port in my laptop but it says I have to ask what the higher than my laptop processor is able to support.

  If someone can tell me what that highest processors my laptop can support thank you.

  The manufacturers of portable don t support the upgrade of the CPU and so there is no information on the possible and compatible processors.

  But the fact is that a CPU upgrade depends on some factors of view: the new processor must be supported by the chipset which is part of the motherboard. Second, the BIOS must support the new processor.
  In the case where one of the parties would not address new CPU, the laptop would not work.

  So first I would recommend you to check the chipsets support.
  The camera seems to support the Mobile Intel HM65 Express Chipset
  On the Intel Ark page http://ark.intel.com/products/52808 under the point-Compatible product, you will find compatible processors and supported.

  But even if you want to use the CPU supported by the chipset, there could be a compatibility issue with the BIOS. I have no idea of which processors are supported by the BIOS because as I said above: this information aren t published by manufacturers of mobile phones.

  That's why these updates of the CPU is always risky.

• What is the maximum RAM for each location dimm can support for desktop computers Compaq Presario CQ3541L?

  I have a 32-bit ubuntu 12.04 OS installed on Compaq Presario CQ3541L desktop PC. Now, I want to update higher along 64-bit ubuntu 12.04 OS memory RAM. I want to know what is the maximum size of the main memory that each DIMM DDR3 slot can support. I need at least 8 GB of RAM since the apps I run will consume as much as 6.5 GB and probably more.

  Thank you.

  Yes, that's the conclusion I came to.  You can always try to see what is actually happening.  I had a different motherboard (again a HP) which had similar limitations except his max was total 2 GB, and he saw 4 GB very well.   They make a slightly different version of this Board with 4 memory locations, instead of both yours has, then who knows until you experimant.

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• An Atom CPU N270 @ 1.60 can support 4 GB of RAM?

  An Atom CPU N270 @ 1.60 GHz can support 4 GB of RAM?

  Hello

  Please follow
  http://Ark.Intel.com/products/36331#infosectionmemoryspecifications
  http://www.Intel.com/content/www/us/en/intelligent-systems/Navy-Pier/Embedded-Intel-Atom-N270-with-Mobile-Intel-945GSE-express-chipset.html
  Thank you

• What CPU I can go to?

  Hi all I'm new to all this, but what I want to know is what is the biggest CPU my PresarioC500 can be upgraded to? Or can someone give me a hint on how to know what it can be improved to. thanks bunch.

  Steve

  Hi, Steve:

  I find no official documentation of HP on the upgrade of the processor of your laptop.

  However, I found this thread on another forum where some people have successfully installed the T5500 processor on their

  Models C500.

  http://www.notebookforums.com/forum/thread/192982/help-upgrading-Presario-c500-series-notebook/60

  Paul

• I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements made n

  I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements does not help.

  System requirements | Creative cloud

  The system requirements (lightroom)

• HP Pavilion a1129n: what I can and do I update Windows 10 on my HP Pavilion?

  I have a HP Pavilion a1129n that has been improved and now has hard drives of 279 179 & 6.71 GB (without total en 316) and 4 GB of RAM. I am using a DELL E2011H monitor. Do you think I should switch to 10 Windows in Windows 7?

  I got a message from windows says:

  "Unfortunately, this processor is unable to run Windows 10.

  The CPU is not supported.

  ATI RADEON XPRESS 200 Series

  The manufacturer of the screen did not your screen compatible with Windows 10. Check with the manufacturer of support. "

  And the site HP wrote "this product is no longer supported.

  Does anyone know if there is what I can do to solve this problem and get the free update for Windows 10 (before it's too late) without it taking much time or money? Thank you.

  Rob_E

  Sorry that person to return to you earlier on this subject...

  I've been out for a while and only just now saw this. do not know why no one else has answered you.

  Anyway... my advice would be DO NOT upgrade to Win10.  You have a really old video chipset and there is no new Win10 driver for it, that would have relegated you to something that Microsoft calls a basic graphics card, which means you would get low resolution and poor performance.

  In addition, lack of HP Win10 drivers for your other hardware could very well make other functions turnine, as well.

  Older PCs simply did not succeed well with the upgrade - but at least you gave on this subject in advance and do not end with a trashed PC - what happened to me!

• What CPU would work on Satellite Pro A300 - 2 2

  I know much more about desktop computers I do laptops.
  However last night my laptop completely froze and held the current sound (make a sort of buzzing).

  I thought nothing of it at the time but was not come sensitive again so I held the power button down and fell asleep. When I woke up this morning I started my laptop, but it does not start.
  The motherboard is not broken, as it is givin power turns on and the disk drives ect...

  Basically, I wonder what will work the CPU in a 2v2 a300.

  I HOPE, it is not soldered but I have not confirmed that as I have to go in a moment, so I can't open her top.

  Thanks in advance,
  TheUnknown

  > The motherboard is not broken, as it is givin power lights and disc drives ect...
  Well, that means nothing even if the led power and other lights would be ON, it could still be a motherboard problem.

  > I HOPE, it is not soldered

  The processors are not welded by socket. So it is possible to remove it from the motherboard.

  > Basically, I wonder what will work the CPU in a 2v2 a300,
  It is important to know which chipset support for laptop and what CPU is taken in charge by the chipset. As far as I know, this unit was equipped with a Mobile Intel GM45 Express Chipset.

  As far as I know the chipset supports the Intel Core 2 Duo CPU
  The news from Intel here:
  http://Ark.Intel.com/products/35134/Intel-82GM45-graphics-and-memory-controller-hub
  Under compatible products-> processors, you will get the full list.

  But even if the chipset would support the CPU, it could be a compatibility issue with the BIOS.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• VMware Workstation 6.5.2 can support AMD 4200 +'s AMD - V

  I know that Workstation 6.5.0 uses 4200 + CPU AMD - V.

  So I can't install ESX3.5 on Workstation 6.5.0.

  But what of VMware Workstation 6.5.2?

  VMware Workstation 6.5.2 can support AMD 4200 +'s AMD - V?

  I want to use ESX 3.5 on VMware Workstation.

  # 10 CPU: AMD family is required to support AMD - V in Workstation 6.5.x.

• I want to write full khmer unicode in imovie. What I can?

  Dear apple supports,

  I want to write khmer unicode full with mac os and I use with iMovie create movies. What I can?

  Have you tried?  OS X comes with Khmer unicode keyboards and fonts.  How they work well in iMovie, you'd have to test.