4710 HP Probook s VQ494EA cpu is at 100% and extremely slow when you work with the AC adapter / CC

Similar Questions

• The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

  All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

  I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

  I did not change my system.

  The problem appears on the two accounts that I installed on my operating system.

  I removed all the unwanted programs since the system was started.

  I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

  Help, please.

  Thank you in advance!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Add additional vCPU to 2008SE - 4 > 5 - added CPU shows upward in Dev Manager - Show does not work in the Task Manager

  So as a test in my lab, I changed a 4 vCPU to 5 vCPU virtual machine (by adding a) and started the virtual machine. The CPU is displayed in DEV Manager, but does not appear in the Windows Task Manager. I rebooted, shut down etc. Is there something else that needs to be changed for the 5th appears? Is it not able to hand odd CPU 2008?

  Thank you!

  2008 standard Edition does not support 4 processors. You need Enterprise Edition or Datacenter Edition for more than 4.

• HP probook 4530 s will not work with the battery installed with the battery installed.

  When the battery is in my hp probook 4530 s he will not come, but when I take the battery from the computer works fine.  I need to know what can cause that I got a hp replacement battery it works for about 30-45 minutes and then it does the same thing again.  Can someone tell me what is happening with my computer is 2 bad batteries or what?

  Hey ctbookkeeping,

  I would say that your laptop is going to need a maintenance. It is a symptom of the failure of the AC/DC converter Board. You can contact technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Take care

  Sean

• This CPU, AMD Phenom II X 6 1035T, will be compatible with the model p6550z.

  Looking to update proceesor for the model with the amd phenon II x 6 1035 t p6550z.  I want to just make sure that it is compaible...

  Hello

  It is a machine CTO so very difficult to find the full specs on the HP Web sites. Please check this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02250435&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=4162263&prodTypeId=12454

  Kind regards.

• CPU is constantly overheating and freezing Satellite Pro A30

  Hi guys,.

  It seems that my CPU is constantly overheating and freezing of the PC.
  (is - what happens when a CPU is overheating?)
  Fans are turn eratically.
  The radiator seems warm enough but still palpable - even if it's just.

  As a trial, I would change my CPU clocked at 2.6 Ghz for
  a slower, cooler to see if it solves the problem.
  Can I just swap, or do I have to change something
  to ensure the new processor running at slower speed?
  Is there anyway I can say that the current of the processor to run
  at a slower speed?
  (I can not even installed on windows
  the PC hangs before the end)

  Thank you
  Ray.

  As noted by James energy saver controls the speed of the CPU and cooling method.
  You can change the settings and check if it will help.
  But a question; How much time do you use this laptop or how old is?
  Sometimes after long use, that dust and debris could have a bad influence on cooling and fan modules.
  For the most part a cleaning cooling module would avoid overheating. But I would not recommend to clean the laptop yourself if you have no experience.
  In my opinion a technician should do.

• Portege R100 - CPU up to 100% usage during execution of foobar2000

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to begin the file search engine, when I update the list of wireless networks and when I add files to foobar 2000, CPU usage shows 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  Hello

  Foobar2000 is unknown to me and have no experience with this tool, but it is clear to me.
  You said that the CPU goes up to 100% when running this tool.

  Well, this tool is responsible for the use of the CPU! Why? I put t know.
  Maybe you should contact the manufacture of this software for more details!
  http://www.foobar2000.org/?page=support

  Good bye

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• CPU is always 100% always

  Hello

  I already connected my problems here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/WinXP-SP3-messed-up-with-IPC-errors-task-bar-color/3a194637-CC25-4f82-9BD8-3156f996652d

  with not much help, I tried the system restore... In fact this is the point where I have no DOUBT (not sure) had installed the drivers from Dell.

  Now the only issue is resolved is the taskbar which is now back to normal... However, I have now even serious problem...

  CPU is always 100%... always...

  The task CPU usage

  eGUI.exe 01
  Svchost.exe 31
  Svchost.exe 17
  services.exe 26
  Taskmgr.exe 01
  ekrn.exe 21
  System 03

  varies around him.  Does not open Firefox and IE opens after a long time. . any help to solve this problem would be appreicated.

  See you soon

  -Newxper

  Thank you Andrew and Elizabeth23...

  I had this problem fixed. I ran the combofix and I have my cpu use is that technology should.

  Thank you

• CPU usage always 100% after installing Vista SP2

  Hello

  I am currently running A Dell Dimension B110 with 1 GB RAM 256 mb nvidia geforce 6200 (pci), 2.6 ghz celron D and Windows Vista Home Basic SP1.  It works nice and fast.

  That is until I have install SP2.  Then the CPU usage is always 100% when running anything (with the exception of the Windows Explorer), and the pc is running very slowly.  To solve the problem, I went back down to SP1 and everything goes quickly again.

  A few weeks later, I tried again and the same result.  So I returned again back to SP1.

  For future software versions, I need SP2.  Does anyone have advice and/or corrections to this problem?

  Thanks in advance

  -One5860

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• frequency max sawtoothing, 0-100% and CPU usage it follows on all cores

  I've never seen frequency max sawtoothing like that or could find examples on the net...  I ran variations of msconfig from 8 cores starting at the current point of not designating the number of processors on startup (which solved mouse jerky movements). allowing the BCDEdit detectHAL did nothing. I killed the process and services but can't get rid of the saw tooth or see what is the cause...  For once I feel stupid that I see.

  processors xeon to dual-core quad on a motherboard s5520hc with 20Gigs of ram and a NVIDIA gtx650.  New installation of Windows7. Performance monitor reports CPU 0-7 and all of them are subject to sawtooth synchronizing and CPU usage 0 to 95%. CPU - Z shows the two processors are almost identical in performance. (bus speed varies very little)

  Any ideas would be appreciated.

  

  Hello

  You will need work with the support of Intel.

  Intel - Support
  http://www.Intel.com/p/en_US/support
  Intel - community and Forums
  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Probook 4440 s CPU upgrade?

  Hi, I have a 4440 s HP's Probook and I'm a little confused as to what UC my cell phone is compatible with. My question is to understand the type of socket. I found sources that my laptop has a G2 cpu socket that has something (that I can't fully grasp) to do with PGA988. I would buy an Intel Core i5 3380 M if possible, but it is listed as being for socket PGA988. Is this compatible with laptop CPU? I know that G2 and PGA988 socket are related in a certain way and they might be the same, but I can not find a concrete source that says that it is

  McSquid wrote:

  The GPU is on the processor so its just Intel HD 3000 (another reason I want to upgrade so is id 4000 HD)

  The chipset is Intel HM76

  It is a chipset of Ivy Bridge. You can go ahead with the upgrade.

• Power problem 4710 s ProBook

  5 days ago, I opened my probook and I think that I had to push the power button. Usually, I work in this tower without the battery top. I turned it off without problem. Yesterday, I triered to turn it on. Impossible. no lights nothing. I tried to turn on with the battery. Also, it's a lot of time without charge, that I hope he would have a little power. Nothing.  I sigh that if I do not work with laptop computer mark I unplug the power.

  Can anyone help?

  Hello d_tryfonas,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• When you set your $@ %! container plugin? It warms my CPU.

  Plugin container keeps my CPU so busy, she warms and slows down any use in Firefox. Why it has not been fixed? I don't want to leave Firefox and go to Chrome, but I may have.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  https://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster

  https://support.Mozilla.org/en-us/KB/Firefox-uses-too-many-CPU-resources-how-fix

  https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding

• Pavilion 15 ab034tx: fan speed does not synchronize with the temperature of the cpu all in game.

  Although playing high graphic games CPU overheats and the game stops working after 5 minutes of play. So please make changes to bios fan settings.

  Hi @abhishekkm,

  Welcome to the HP Forums!

  In your post, you said that currently your HP Pavilion Notebook 15-ab034tx is overheating. You can restore the BIOS by default, as this has helped other people with this problem. Here is a document that will show you how to proceed.

  Please let me know.

  If you want to say thanks for my efforts to help, click on the thumb to to give me a Kudos.

  Thank you.