Power problem 4710 s ProBook

Similar Questions

• Tecra R840-S8450 - power problems - help with Blink Codes

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

  Of course quite here, is that no one from Toshiba has the manual to find codes?

  Posted by dgwbdavid
  

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

• On the Satellite P30-131 power problem

  I have a power problem and I tried the process of elimination, but could do with help, I gave as much detail as possible and appreciate any help or advice.

  This started a few weeks ago and seems to be deteriorating slowly.
  I turned on the laptop and all 3 lights before the main power on fully charged battery light and light green...

  I started noticing a few times when my power cord is plugged into the laptop that, without warning, the laptop switches to the battery power and also turns off power light, battery light turns off too but which may or may not happen, in any case the laptop is still on but now running on battery.

  I then out of the supply cable and reconnected it hoping that power is restored, but it has no effect, I have to close then low laptop unplug then Pug back in and I get all 3 lights and then I can start.
  Now, when I boot it does not always solve the problem and I can finish on a few seconds of starting battery.

  Its certainly not the battery because it has a new battery replaced 12 months however, its either the adapter or the connection inside the laptop that plugs into the adapter.

  The reason I think it is perhaps one of them is when the laptop going to battery, lead that is always plugged into laptop, I moved, and this can cause the return of t lights and also the laptop back in, power once again, but if I let go then it goes to the battery again one the light turns off. I also took the battery out and kicked and the laptop works but has lost the power sometimes when I moved it turned off my tour so I'm sure that it is related to the lead, but do not know if its internal or external.

  Any help or advice appreciated

  Thank you

  What kind of help did you expect exactly?

  > Its certainly not the battery as it was a new battery replaced 12 months however, its either the adapter or the connection inside the laptop that plugs into the adapter.

  It seems you have tested everything that could be tested using common control procedures, I think that more is not possible
  I can provide also a few suggestions and I m coming to the conclusion that neither electronic power supply is not ok or your power adapter.
  But I would tend to the first; electronic power supply.

  As you can see that these are only suggestions

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• possible power problem

  Hello

  I have a desktop HP Pavilion 7865 has started to give me some power problems.  I followed the troubleshooting steps to

  http://support.HP.com/us-en/document/bph06788#n414

  The first time it's happened that I noticed that the power light little would go as I connect the power cord to the back of the unit.  But the little green light and then returned.  After some tests, the power light remained on and I was able to turn on the pc.  However, it started again this morning so I finally took my monitor power cord and used this one to connect the power supply to the back of the computer and to a power outlet and it works.  I plug the pc power cord into the monitor and my monitor works too so I don't know if it is or is not the power cord, but I'll go out and get a new one and see if that solves all my problems.

  However, my question is this... If the problem is with the power supply that I plug in can be replaced?  If so, it is something I can do myself or should I consider somewhere to do?  Also, if I need to replace the power supply and I can do it, how can I know what type of replacement power supply unit power I need to get and are there any other cables that I also need?

  Thank you so much for all your help.

  The information I found States 7865 HP is a Win98ME around 2001. The stock PSU is a Bestec 200W.

  Form factor is Micro ATX PS3. Here's a picture: http://www.911forpcs.com/7865.html

  If your going to replace the power supply, you must perform steps. I found a contradiction Newegg.

  Micro ATX

  http://www.Newegg.com/product/product.aspx?item=N82E16817338031

  http://www.Newegg.com/product/product.aspx?item=N82E16817104113

  PS3

  http://www.Newegg.com/product/product.aspx?item=N82E16817338005&cm_re=ps3_power_supply_replacement-_-17-338-005-_-product

• HP ProBook 4510 s power problem

  I have a ProBook 4510 of s. This morning he was in battery operation. Battery charge with the AC adapter is plugged in. Only a battery with flashing red x icon. Once the battery is depleted it would boot is no longer. I took out the battery and held the power for 30 seconds and plugged only adapter button in. The computer still does not start. Any suggestion would be appreciated. Thank you!

  Note: When the adapter connects to the laptop there is a little light above him. With the battery connected that little light flashes orange 7 times after pressing the power button. With the battery no light at all. NA not knowing if this information was relevant. I just wanted to add.

  Sounds like the battery has just stopped charging and the laptop powered by the adapter or because the charging circuit on the motherboard or the power adapter is bad. The first thing is to test the adapter using a multimeter or try another known good. Post back if you need help with this.

• Power problem (battery-operated same power supply cord is plugged)

  Hello!

  I again (only a few months) HP ProBook 6550 b. Recently, I noticed strange problem.
  I don't understand if it's a hardware or software problem.

  The problem: sometimes when the laptop starts up I see that it is running on battery power cord is plugged.
  Solution: I need to disconnect, and then again once (sometimes several times) to see the icon "plugged in, load" once again.

  I don't know if it's related, but... Mainly, I start my computer on the Windows environments from process Plug and battery.

  Provided HP with Windows 7 Professional x 64 preinstalled.
  Someone at - it similar problem or someone knows what causes this problem?

  If you slightly press the power adapter were it connects to the computer is laptop power detect AC?

  try saving the Bios on your click Law Office and run as administrator

• Power Mac G5 power problems...

  Hello, on a quest to find a G5 computer, I found an early 2005 Power Mac G5 (2x2.7GHz). The first time I plugged it in and turned on, it works beautifully. The second time, I pressed the power button and heard a loud noise from the power supply. I replaced and this is what is happening now:

  When I plug the power cable in, there is a small clicking noise about a second after plugging in, and the power led on the front of the machine flashes for the click. However, it does not at all depend on when I press the power button. When I unplug the cable, it makes the same noise about a second after I unplug the unit. I see a pale glow of the light output after unplugging it.

  Anyone have any suggestions to solve this problem? It is part of a collection, that's why I want to do operational.

  There may be defective capacitors or other power supply problems, including

  overheating in the dust inside the power supply or air channels. And

  If the device is cooled by liquid, other things may be involved.

  Since all the PowerMac G5 power supplies are considered to be custom,.

  to get a good replacement is a way hoped to improve the situation.

  Unlikely as is, actually an inexpensive job.

  Have you tried a SMC power management unit reset? Or reset PRAM?

  • How to reset the SMU on a Power Mac G5 (late 2004) or Power Mac G5 (late 2005) - Apple is supported

  To reset NVRAM (PRAM) see:

  • How to reset the NVRAM on your Mac - Apple Support

  Several links appear in the result of this research; some look promising:

  https://DuckDuckGo.com/?q=Troubleshooting + G5 + PowerMac + power + supplies& t = ffsb & AI = web

  I read about the noise, the PowerMac G5 can do when some power components

  fails; Troubleshooting is involved. Somewhere I had a link to a source for official PDF
  REPAIR, download for offline use. -I do not see if I can locate the item...

  Apple Power Mac G5 (early 2005) manual .pdf

  Apple Power Mac G5 (late 2005) manual .pdf

  Apple Power Mac manual G5.pdf

  Good luck!

• Satellite Pro U400 starts - power problem?

  Hey,.

  my liquid U400 down without any reason and doesn't start anymore.
  My first idea was damage from CPU, but even if the laptop is taken to power the power led does not illuminate.

  (1) make U400 notebook work normally when the battery is removed, but pluged in power? Because if not maybe only the battery is broken.
  (2) any other ideas? :)

  Guarantee is more than 1 months :(

  Answer to your question is YES. You can remove the battery and use your laptop with AC power only. In most PC stores showing the rooms are placed laptop without battery. Probably the batteries have been stolen in the past.
  Anyway, they can run with AC power only.

  When you connect the laptop to the power plug and the power light is not on I assume that there is a problem of electronic power supply.
  Contact the nearest authorized maintainer and ask for help.

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.

• With Satellite A30 power problems

  Hello

  Over the last four years, I have been using a Satellite A30 with XP Pro... had no problems whats so ever until that last months... I started to notice the battery life becomes lower before (prob because of the decrease in battery life) but also when he is on the grid it will charge the battery to 100% but instead of power are removed from the sector It starts to drain the battery even when the sector is connected.

  Another problem is that I have to keep or stop the laptop goes into hibernation mode so it can recognize it is powered from the battery to load... even in this case, it may take several attempts for the laptop to begin to charge the battery...

  These problems started start after warranty, and was released in additional insurance coverage

  Any information or help gladly appreciate it that I fight to get assignments done University

  Thank you

  Ben

  Hi mate,

  had a similar problem with an other friend A30. After sending the machine to an ASP (certified partner), they told us that the internal charger was defective and they have offered to swap the motherboard.
  But given that the motherboard was really expensive for him he sold the machine on Ebay and bought and Satellite A200 which is a machine really well.

  I guess that the motherboard is gone...

  That's all

  See you soon

• Satellite A110: keyboard, touchpad, power problems

  I have a Toshiba Satellite A110, purchased a few months before. In recent weeks, it started randomly locking the keyboard and the touchpad (with or without external mouse plugged - although an external mouse still works).

  Now there is power to the top of the issues, with the suspended system Bios Toshiba screen, can fully initialize maybe once in five.
  Acquisition of wireless network is also very temperamental. I tried this software I can think (new drivers/virus scan/uninstall-reinstall), with the exception of a reinstall full backup disk Toshiba.

  Any advice would be greatly appreciated.

  Thank you

  Hello

  I think we should first find out if the problem is software or hardware related.
  In this case the installation of the operating system with the Toshiba Recovery CD is recommended.
  After installation, the laptop should work without worries.

  But if the unit will hang and not start properly there could be something wrong with the hardware.
  I think that your warranty is valid and in this case you should always contact the ASP in your county for a check.

• Toshiba TL96 power problems

  Hello everyone,

  I'm not very tech savvy so please excuse in advance.

  I have the TL96 Smart/3d LED TV. Purchase August 2012 from the wonderful Comet. Anywho, I had no problem at all until yesterday.

  Television has decided to close automatically in standby mode, even if at the time when television was in use. Since the decision, I can get the TV to power - LED 1 light is green fixed - no light at all on the 2 LED light - but it's just a blue screen.

  The TV remote control does not work, the controls on the side of the TV do not work either. I have the TV plugged directly, I took the plug for 30 seconds and retried and always the same scenario. TV starts, green light is solid, and it just goes straight to a blue screen.

  I removed the HDMI connectors and also we had a PC Tower connected via RGB input - I tried to light a single HDMI connected and swapped their all - always the same result.

  Support FAQ suggests a "lock" for the TV controls does not, but I can't locate it.

  Any advice would be appreciated because it is outside the standard 1 year warranty and the provider is currently in liquidation.

  I am a single MOM with two boys who are absolutely dying to return Minecraft!

  Thanks in advance

  Katie

  The Panel mentioned blocking disables the keys on the TV. All the buttons on the remote control is still usable. But I guess that's not the problem.

  I think that your s TV material is affected. Perhaps the mother board who knows I guess that there is no simple workaround solution for this problem.
  The technician must check the unit to find out the defective part, but I think in the case of defective Panel or motherboard the fix would be expensive :(

• Pavilion x 360: HP Pavilion x 360 11-n012na - POWER PROBLEMS

  Product purchased in December 2014.  Gave power to the problems for some time.  When the power supply plugged in and on no light comes on as if cell phone completely dead.  Got a new adapter to try made no difference.  I think it takes the battery inside replacement needs and I can see a video on the site of HP support illustrating how to change the battery.

  Kindly an expert can check by looking at the symptoms if it is the battery please I can then go ahead and order a replacement and change it myself.  Thank you very much.

  Hi @Fas2,

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  Thank you.

• Standby power problems M30-344 (CPU uses only 600 MHz)

  Hello!
  In my m30 344 motherboard and display are changed.
  Now I can't use the full 1.5 ghz cpu!
  In the power saver profile I can choose only the cpu rate of 1-3! I've now uninstalled this tool and reinstalled the version by the net. But I can use only 600 mhz!
  What can I do?

  [Edited by: admin 7 May 05 08:18]

  Hello

  As far as I know if the motherboard is changed the speed of the CPU will be around 600 MHz and in this case the service partner needs to update the CPU microcode. After that, the speed of the processor will be as before.

  I hope that you have already solved your problem with the speed of the processor.