Portege R100 - CPU up to 100% usage during execution of foobar2000

Similar Questions

• Portege R100 - CPU usage 100%

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  It has nothing to do with your computer - this is the trident driver problem - there is a work - around
  Try changing your display configuration-

  (1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
  (2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
  (3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applications

  If my post is not detail for you
  Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructions

  That will solve your problem!

  Good luck and enjoy your nice laptop!

  Arthur

• Portege R100 CPU

  What is the maximum speed that supports the R100? Dothan M 725 755?

  Hello

  I think that the best way that you can use to contact the after-sales Service of Toshiba partner. They have the best sources of information.

  Do nothing alone. It can be very expensive. ;)

  Good bye

• Safari 8.0 - 9.0 100% usage Cpu OSX 10.11.3 that can relate to the bookmarks / favorites

  I have a very strange problem like many, I remember Yosemite until last El Capitan 10.11.3 (15 d 21) and Safari Version 9.0.3 (11601.4.4) indeed, it started to become more annoying over time. Safari sometimes goes upward at 100% cpu usage, sometimes even more, but it is directly on the process of safari, all child processes are the normal CPU including wireless networking usage. I started because of debugging that until now I can't to closed source. I tried deleting all the cache, cookies, bookmarks and all data stored in what concerns the Safari.app, including navigation and other databases. It doesn't have a lot of help. I've created a new test account on my macbook pro, then tried to reproduce the problem with osx plain-set with safari, but after hours of use could not reproduce the problem. Then I imported Bookmarks.plist on my account current account set correctly, after less then 15 minutes, safari rose to 100% cpu again usage. I also tried to use iCloud to automatically migrate the data from safari snacks I made mistake in manual transfer, but it seems icloud backup safari is also problem back. My favorite looks normal, nothing to share here, a few favorite pages stored in a subdirectory in Favorites and couple more bookmarks but especially file plist format seems to be corrupted itself. I couldn't find that question is strictly linked to a Web site, it seems that this could be linked to the favorite bookmarks. Does anyone have and solution on this issue?

  PS. I have no problem with other browsers, such as Opera, Chrome, Firefox - but using another browser is not the solution. If this could be useful I took part in the beta to preview at Yosemite program, I returned to normal release with the first public version of Yosemite, but I don't really think that it is the source of the problem.

  Example of process of Safari before 100% of load

  Example of process of Safari during 100% load http://pastebin.com/RDCLRB1n

  Screenshot with highlighted 100% use of safari mother-process

  

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Safari

  A right click or Ctrl-click on the line and select

  Services ▹ Open

  the contextual menu.* should open a folder named "Safari". Quit Safari runs. One or more files in the open file must have a name starting in 'history '. Move these files and only those which, on the desktop, leaving the window open. Restart the application and test. If there is no change, leave again and put the files that you moved back where they were, crushing those who could be created in their place. If not, remove the files that you moved. The browser history will be empty. If possible, restore deleted files from a previous backup problem.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• The regular CPU 100% usage peak

  I see CPU spikes at 100% at fairly regular intervals, trying to play flash games or videos. Here is the graph of CPU usage process Explorer during a fully downloaded YouTube video playback:
  
  http://SCS.Carleton.ca/~elawles2/wtfgraph.PNG
  
  I am running Flash version: WIN 10,0,12,36 Adobe version test. Here are the specs of my computer:
  
  http://SCS.Carleton.ca/~elawles2/pcoverview.PNG
  
  Does anyone have an idea what could be the cause?

  I solved the problem; my CPU is overclocked to 2. 4 GHz, and my basic tension has been set to 1.66V, which is far too high. Downclocking my 2.2 GHz processor and set my voltage on 1.4V fixed things; now, I see much more acceptable CPU utilization.

• Portege R100 freezes - CPU fan is defective?

  I ' v was Portege R100s for a long time, maybe 7 years old, I am at my last one.

  I'll be back from it after eating and the XP screen froze, no mouse movement, CntrlAltDel did nothing. Press and hold the power button it stopped.

  Now I can start, but it freezes again in a very short time, a few minutes. I'm guessing that the processor fan is stopped.
  Not tht sounds good to people, it's a realistic possibility to cannibalize the carcass of my previous and hang the fan of my current group?

  Thank you

  Of course, it could be linked to the question of the CPU.
  If the CPU wouldn't be cooled correctly then the system can stop to answer.

  Are you sure that the fan has stopped working?
  If yes then the cooling module must be checked and replaced by the compatible.
  You may not use the cooling modules. It should be compatible.

  But to be honest, I think that the RAM modules need to be checked also
  In most cases, a RAM problem is more realistic as a defective cooling module

  My old laptop has stopped working because one of the RAM slot is faulty
  I delete a module and the laptop worked using a single module of RAM
  However, I couldn't use it as I wanted and I bought the new notebook.

• Manager tasks shows my CPU 100% usage but when I go to the process tab only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%

  Original title: Task Manager

  Manager tasks shows my CPU 100% usage but when I go to the processes tab and sort by CPU usage there are only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%.  What else is using my system resources that is not displayed by the Task Manager?

  Click Show processes from all users . There may be other systemic processes and processes that run under other accounts.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

• Portege R100 does not start

  Can someone help me please. My Portege R100 does not start, when I turn the following text appears: in touch with tomorrow toshiba. After a few seconds a black screen with a blinking cursor on the left side of the screen.

  Thank you very much

  Hi Rehana,

  The Toshiba screen you will see first is the initial start screen is displayed while loading the BIOS. Once the BIOS has completed its process of loading, the system tries to boot the operating system and it is at this point that you have found the black screen with the blinking cursor in the upper left.

  Unfortunately, this indicates usually that the laptop can not load the operating system from the hard drive, or because the hard disk itself has not the contents have been damaged somehow.

  You might try to charge your laptop in 'safe' mode (press F8 during the initial loading of the BIOS) or you can try to boot your laptop from a bootable CD/DVD and hard drive.

  Finally, you can try to re - install your OS from the recovery CD.

  Kind regards

• Portege R100 + Windows 7 RTM commercial = fail

  Hey people,

  I just came to Windows7 RTM on my Portege R100. But I can't not all utilities work. For the Hotkeys FN + Workin ', I tried "Toshiba Value added Package", but I did appear an error during the installation process: "ID_ERR_NOTINSTALLVALZ_MESSAGE."

  One for Windows xp designed software does not start anyway... so I had to look for software designed for vista/7, but in my eyes toshiba can't stand not a 5 year book, most new operating systems... driver vista for my R100 at all, but with windows7 I have no driver to install manually.

  So, how can I solve the problem with the FN keys? Nothin' works, the because not all software start XP designed...

  Thank you
  Betzi

  Hello

  I think that it s Betzi normal and you can't do anything. I mean it s only the RTM of Windows 7 and currently are without tools and drivers for Windows 7 available. What you can try are Vista drivers.

  I think you should wait a few more weeks until the driver support starts, possibly for R100

  Alternative, you can try some software in beta from the Toshiba page we:
  http://www.CSD.Toshiba.com

  Good luck! :)

• Update BIOS Portege R100

  Hi all!

  I want to update the bios of my Portege R100, I downloaded this trought this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU

  unzipped and started install2.exe but I receaved this error:

  "* [Error] BIOS update is failed. "BIOS is not able, updated on this configuration."

  Windows xp sp2
  No installed external device

  Can someone help me?

  Thank you

  Hello

  You can download another version of the same-update bios here:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlViewDL.jsp?soID=1153942&MOID=385411&RPN=P PR10U

  This file contains more information on the execution of the update, see the readme file
  You can do an update directly in XP or make a bootable floppy or bootable CD

  If the "live update" in XP does not work, you will need at least a key-USB-fdd, most of them is easily recognized by the bios (hold F12 during startup and choose the fdd)

• Portege R100 - how to use the CD?

  Hi all
  I have a laptop portege R100, which has no cd or floppy drive; during an automatic update of windows, it crashed and I can't start although I have all the software which are all on CD! I would be grateful for any suggestions.

  Thanks in advance
  Julia

  Hello Julia

  Have you tried to boot your computer in SafeMode (F8)?
  Not working?

• Portege R100: question of recovery - disk partitioning error

  My old portege r100 doesn't quite work.
  I tried using the recovery CD product, but during the resumption of the process the following message apears:
  Drive partitioning error!

  What it means?
  What can I do to overcome?

  Thanks in advance

  Yannis

  Hello

  It seems that HDD might not be partitioned correctly.
  Perhaps the HARD drive is not ok?

  Check if the HARD drive is recognized and listed in the BIOS.
  If the HARD drive is not listed, then the HARD drive is dead and must be replaced.

  If the HARD disk is listed, then there might be a problem with the HARD drive partition table
  You could test the HARD drive by using a tool called Drive Fitness Test.

  You can also try to format the HARD drive first. You could fix this HARD drive on another computer by using a USB HDD controller. This allows you to access the HARD disk and format this drive

• CPU is always 100% always

  Hello

  I already connected my problems here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/WinXP-SP3-messed-up-with-IPC-errors-task-bar-color/3a194637-CC25-4f82-9BD8-3156f996652d

  with not much help, I tried the system restore... In fact this is the point where I have no DOUBT (not sure) had installed the drivers from Dell.

  Now the only issue is resolved is the taskbar which is now back to normal... However, I have now even serious problem...

  CPU is always 100%... always...

  The task CPU usage

  eGUI.exe 01
  Svchost.exe 31
  Svchost.exe 17
  services.exe 26
  Taskmgr.exe 01
  ekrn.exe 21
  System 03

  varies around him.  Does not open Firefox and IE opens after a long time. . any help to solve this problem would be appreicated.

  See you soon

  -Newxper

  Thank you Andrew and Elizabeth23...

  I had this problem fixed. I ran the combofix and I have my cpu use is that technology should.

  Thank you

• USB 2.0 blue screens on Portege R100

  Hello
  I have a Portege R100, when you insert a USB 2.0 device it blue screens and you can t do something. But if you insert a USB 1.1 device, he is very well, I tried the upgrade to Windows XP sp2 and this t hasn't helped any ideas.

  Thansks

  Hello

  Try to remove the USB entries in Device Manager, and then restart the device. The ports should be recognized and installed correctly. In my view, it cannot happen without any reason. It will be interesting to know since when this problem started.