4730 proBook s: 4730 s Notebook Ethernet driver Windows10
Since my update for Windows 10 laptop does see the ethernet port. I can't find the driver for Windows 10 on HP website, they only provide the drivers HP Travel HUB and LAN for Windows7 64 bit OS.
I really want to connect my laptop via cable point of access for much higher speeds in the bottom and the download, then... Can someone tell me the right drivers/solution?
Hello:
Your laptop comes with a Realtek gigabit ethernet card.
See page 9 of the quickspecs at the link below.
http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04288440.PDF?ver=25
In as much as there is no ethernet Realtek card listed at all under this article means there is a strange problem which is going to be difficult to understand.
It is not the ethernet driver.
Was the ethernet port working correctly before installing the W10?
You have the HP Connection Manager software installed before upgrading to W10?
In the BIOS is the active LAN/WLAN change?
If changing the LAN/WLAN is enabled, set the parameter to disabled and reboot the PC and see if the ethernet adapter shows.
Tags: Notebooks
Similar Questions
-
HP laptop - 15-ac179tx: help Ethernet driver needed for HP laptop - 15-ac179tx
Hi all
I recently bought the HP for laptop - 15-ac179tx on the back platform and managed to install windows 7 ultimate I g almost all the drivers on the driver from Hp site, but the ethernet driver is not where to find them. Can someone help me please.
Thanks in advance.
Hello:
You need this ethernet driver...
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp71268.exe
-
HP 655 update to windows 8.1 problem with Realtek ethernet driver
Hello
I do an update for Windows 8.1 and now I have a problem with the Realtek ethernet driver, which does not. If I look in Device Manager I see an error for Realtek ethernet driver:
"Your computer's system firmware includes enough information to properly configure and use this device. To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35) »
I have the latest version of the bios: F.26
I try to install the driver from the HP site: 8.3.730.2012 HP driver
also I try with the Microsoft driver: 8.1.510.2013
Ethernet works fine in any other OS.
Thank you for you time and I hope that solutions to this problem.
@all
Install the new Bios for HP 655 compatible sound
655 HP
Updated HP Notebook System BIOS (AMD processors)
Version: -
I have a HP Pavilion p6533w desktop pc and the ethernet driver is missing after you have reinstalled the operating system Windows 7 and the HP websit does not list the model #, can any body help?
Hello
This happens to me every time I have to reinstall Windows 7. It seems to be a problem of resettlement on an other drunks. If please download the NIC from the following link and tell me if this solves the problem. Don't forget to save, unzip with 7zip or WinRAR to a folder on the desktop for ease and then point to it manually through the Device Manager, then reboot after installation just to make sure it fully takes effect.
-
Win7 hp pavilion n040se 15 notebook pc driver for win7
Hello
I need win7 hp pavilion n040se 15 notebook pc driver for win7!
anyone can help me?
You should be able to use most drivers of this model. Don't use a BIOS or Audio from there.
Audio Realtek: Choose High Definition Audio, accept the agreement, download and install the driver of first or second depending on whether you installed Win 7 32 or 64-bit:
http://www.Realtek.com.tw/downloads/
Don't know what wireless card you have since HP uses different brands. If the doe doesn't work, you will need to get the id of the hardware it from Device Manager.
IF you have Atheros QCA9000 Wireless Qualcomm:Atheros Bluetooth:
-
HP pro 3500 - problem with ethernet driver
Hello to everyone.
I have a HP 3500 Series Macrotower pro and I have problem and I can not find how to install the ethernet driver.
Can you help me please?
Thank you very much
Hello:
If you are running Windows 7, download and install the second pilot on the list...
-
I have a R60 XP which has lost its Ethernet driver
I continue run XP.
Lenovo has removed all their XP drivers (apparently) y at - it somewhere I can take one that is virus free?
Fortunately the wireless driver works always.
Thank you.
a_q wrote:
I have a R60 XP which has lost its Ethernet driver
I continue run XP.
Lenovo has removed all their XP drivers (apparently) y at - it somewhere I can take one that is virus free?
Fortunately the wireless driver works always.
Thank you.
Nice day.
If you prefer drivers Lenovo directly, many older machines repositories located on EoL web site:
https://download.Lenovo.com/EOL/
I just did a quick search and the R60 is here.
I hope this helps.
Kind regards.
-
m8034n realtek ethernet driver
Looking for the Ethernet driver for this computer that is compatible with the x 86 version of Windows Home Server. The computer had Vista Home, but the drivers do not work or I can't find exactly the one needed. Realtek is the network adapter that is integrated into the motherboard. Any help would be great.
Did not you have installed Windows Server 2003. I thought that you had new WHS, so offered Vista drivers in the hope of a compatible match.
He is a former XP driver who seems to generally work on this network adapter:
http://www.nvidia.com/object/nforce_nf4_winxp32_8.26_11.09.html
-
computer format microtour 3515 PRO ethernet driver
Hello, I'm trying to install all drivers Ethernet of my model, but nothing works.
Where can I find an Ethernet driver?
I post the hardware ID:
PCI\VEN_1969 & DEV_1091 & SUBSYS_2AE0103C & REV_08
Thank you!
This is the page HP Support Center - Microtour HP Pro 3515 - drivers, Software & Firmware for your computer. Please download and install the driver card NETWORK Atheros for Windows 8. For Windows 7, you can try sp56899.exe HP or Driver Atheros Ethernet - HP sp57599.exe
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Good afternoon
I'm a network administrator at a small not-for-profit organization and aired on a particular issue with our 450 HP Gen 2. Using Windows Deployment Toolkit, I have an image clean Windows 7 with the applications we want to push on these machines and then followed with update driver using the HP software Assistant. In general, everything works. But every so often, a 450 HP decides to 'lose' it's network, which is replaced by up to three non-working ISATAP adapt - hidden driver. With hidden devices turned off, the Device Manager shows three network wireless, but not ethernet connections. In addition, the NIC itself is completely dark; no nice little green/yellow lights sparkle.
This was happening before with an image earlier established by my predecessor, and I discovered that this image was intended to HP 450 Gen1 and Gen2 not - even if the image has been labeled Gen2. Thought it was just a simple matter that the Gen1 image was not compatible with the Gen2 machines. They would work for a little while, then break after a series of Windows updates.
So I created my own image, repeat the steps above and for a while thought that the problem has been resolved. But I just fell on my first 'disappeared' ethernet driver scenario; Since users employing 450 HP are usually off site, they need of working machinery. But I have not found anything in the forums or through google search to indicate exactly what causes the problem.
Currently, I use the HP of a DVD Software Wizard because the laptop has no ethernet connectivity to see if that solves it, but I'm interested to know what is causing this problem so I can avoid it in the future. It's not good if users are bringing back machines to me who... was enough to say... do not work.
I look forward to your correspondence.
Best regards
Robert
Alrighty, I thought about it. Essentially, (is no longer editable in the bios) LAN energy saving mode disables the NETWORK adapter, and once off, it will idle rest. Therefore, your PC will not know to turn it on no matter how many times you restart or connect an ethernet.
Here's the trick:
1 unplug the power to your laptop, remove the battery, wait about 1-2 minutes.
2. connect ethernet port NIC, connect the a/c, insert the battery. Starts. You should see your NETWORK card light up.
3. once in Windows, go to the Device Manager. You will see that your Realtek NIC listed. Go into properties, power options and uncheck the option that reads LAN for energy savings.
Problem solved. I hope this helps the next guy.
-Robert.
-
Unable to print error: is not an ethernet driver
Original title: Printer does not print
Please help me I'm so aggravated. I have a Samsung laptop, RV520. I onstalled a HP Photosmart all-in-one wireless printer C4580, scanner, copier with the instalation disk. It wouldn't work so I had to go buy an adaptable Ethernet cable so that it can work. Copy and scan, but will not print from the laptop. I get an error message saying that I don't have an ethernet driver. Where I don't get that? Also when I try to print a document or test page they just straight up in the check for the printer.
Hello
1. what operating system is installed on the computer?
2. is your printer is connected to a network?
3. don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps.
Method 1:
See the link below and run them the fixit tool available, check if it helps.
Problems printing and printing errors:
http://support.Microsoft.com/mats/printing_problems/
Method 2:
Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
More information: http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3418707
Hope this information is useful.
-
Presario SR5450F - need Ethernet driver
Had to reinstall the system, was able to install original disks, we wanted Windows XP istead of Vista which was installed originally. Now I need an ethernet driver. I think the chipset ethernet/LAN Realtek RTL8201CL.
Help, please!
Thank you
Here are the specifications of your desktop Compaq Presario SR5450F. According to the specification, this model uses a nVidia GeForce 7100/nForce 630i chipset and a Realtek RTL8201CL physical interface layer. The drivers you need are the following;
nVidia Chipset Driver v15.56 for Win XP 32-bit
Ethernet (v73.30) WHQL driver
Network management tools (v73.25)
SATAIDE (v11.1.0.43) WHQL driver
SATARAID Driver (v11.1.0.43) WHQL
Application RAIDTOOL (v11.1.0.43) WHQL
SMBUS (v4.79) WHQL driver
SMU (v2.08) WHQL driver
GPU Driver (v197.13) WHQL
PhysX (v9.10.0129)
Away Mode Driver (v6.0.6000.115) WHQL
Installer (v8.36)
and (if using the integrated GeForce 7100 graphics card)
nVidia GeForce Driver v307.83 for Win XP 32-bit
Please send Bravo
-
This computer was originally a copy of XP on it and I've upgraded to Windows 7 and now it won't let me connect to the internet and I went to check out the menu drivers and the ethernet driver was a yellow triangle next to him. I do not think that HP supports this model specific to windows 7? Any driver (hp or 3rd party) would be welcomed as long as it works, thanks!
The simplest solution would be to install a PCI network card. They are pretty cheap.
Windows 7 Realtek drivers are here. They were reported as does not.
-
HP Entertainment Center z555 digital ethernet driver for xp
I am the owner of an entertainment center z555 digital HP and I had to do a clean reinstall, and I cannot find the ethernet driver and audio. The HP website is not available to download ethernet drivers. I don't have the cd of restoration and much more.
The motherboard is ASUS LRTP-LR, and I was unable to detect this product on the site of ASUS.
Anyone has any idea where I can look these drivers?
If you need drivers, follow these steps:
1. in the run box, type devmgmt.msc.
2 unknown devices would be listed as such and plotted with a yellow question mark.
3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
6. Please provide this number so we can offer you the appropriate driver. -
ProBook 4430 s on-screen display driver for windows 7?
Please give me the lik download 4430 s Probook fiunction keys on-screen display driver for windows 7.
Hello
Download and install the HP OSD driver on the link below.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe
Once the installation is complete, restart the laptop.
Kind regards
DP - K
Maybe you are looking for
-
Error message: "ERROR: Cookies are blocked..." when activated
Try to log on as an administrator for my site using Firefox. Used it for years. Now, I get "ERROR: Cookies are blocked or not supported by your browser." You must enable cookies to use WordPress. "I have: - enabled cookies -deleted the cache-Restart
-
In Tecra A8 DVD drive replacement
My DVD player is down, I already have a replacement drive. Does anyone have an idea where the output of the DVD player is located so I can get out? I unscrewed a few screws, but it won't come out. Tecra A8 is the same as the Satellite Pro A120
-
HP LaserJet 8500 a: printer8500A question
You have a problem with my HP 8500. Has got very slow or most of the time not printing at all. Get the message to align the print head and did and still see her fail to align with it. and continue to test every time print but no impression of the
-
upgrading to windows 7 8
-
Original title: what to do now? Hello! I'm trying to get my work wireless for vista, but it won't happen it tells me it cannot find the drivers for the control of the hierarchical network... what to do?