5.4.1 WAAS upgrade

Similar Questions

• WAAS upgrade help

  Hi guys,.

  I am WAAS upgrade to version 5.1.1 to 5.4.1a in Central Manager. It would be my first time. I downloaded a picture of ftp://xx.x.77.166/waas-universal-5.4.1a.17-k9.bin to the CM. I have not activated the automatic recharge. Once I have activate Auto Reload is only the installation of the software is done completely? After the upgrade is made for CM can I push the image and update the SRE engines?

  Thanks for your reply.

  Hi Vishnu,

  Basically, you must follow the procedure described here:

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/v541/co...

  Since you already have downloaded the software of the MC (and I suppose you want to use the CM as the 'repository') you must do the following:

  1. Remember to create a backup of the CMS database and copy it somewhere outside the CM
  2. enable ftp on the CM server (inetd enable ftp)
  3. possibly create user name for using ftp (pointing to the CM itself)
  4. Save the image of the software on the CM (see guide) - click "Auto Reload" If you wish
  5. in the CM device - click Update
     1. now the software will be installed on the CM and CM will be recharging (if Auto Reload is enabled)
  6. Do the same for your remaining devices of WAAS - however I recommend that:
     1. Use the 'image of the accelerator only' for non-CM devices (it is 'only' 290 MB vs 395MB) which reduces transfer time
     2. Download and save this image similar to the universal image
     3. and follow the same procedure for each WAE/SRE/WAVE

  If you do not, click the "Auto Reload", you will need to recharge the device yourself... after the upgrade.

  Don't forget that WAAS 5.4.x is not supported on 274/474/574/674/7341/7371

  Best regards

  Finn Poulsen

• WAAS Upgradation

  Hello

  Is there any document the upgrade WAAS 7541 and Central 249 Manager using GUI?

  Kindly help.

  Thanks and greetings

  Cecile

  Hi Cécile

  Please can you advise what version of code you are and what you are planning to upgrade to?

  There is an upgrade path that should be sought to ensure that your current and planned are expandable to 1 or if it needs a draft version.

  You will also need to ensure that the version of the firmware of your RAID controller on the box 7541 is up to correct level.

  Take a look at this link: -.

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/upgrade...

  I hope this helps.

  Thank you

  Craig

• Path to upgrade WAAS 4.4.7 WAE-512 to 5.4 vCM CM

  I have a deployed WAAS system running 4.4.7 and old WAE hardware is all on the clock at the end of LIFE or do not support 5.4 at all.   The fairies of budge had the money at the end of the year so I have boxes of new WAVE and vCM 5.4 DVD to deploy.

  My question is what is the process to upgrade to the CMs?

  Can I just turn up two 5.4 vCMs as a CMs that is secondary to the primary CM 4.4.7 on a WAE-512, then do a primary?  Guess who than a 5.4 secondary school could synchronize and then directly back from a 4.4.7 elementary school.  It's the bit I have doubts on the subject.

  Or would I need to start with vCMs to 4.4.7 to synchronize, and then take more primary and upgrade?  Is there a 4.4.7 vCM image?

  If it's a dead-end, I saw another discussion on the decommissioning of a WAVE-294.   I think we could be demoted in 4.4.7 joined as a CM high, promoted to the primary and then improved as a springboard for vCMs to 5.4.  Then the 294 would be deployed as an accelerator as initially planned.  Traps with it?

  Or is there a simpler way that I'm missing entirely?

  Can anyone confirm also that the console RJ45 ports on the WAVE-* 94 have the same pinout as traditional Cisco switch RJ-45 console ports?

  Thank you.

  Hi Edward,.

  For the upgrade process, you will need to follow this procedure:

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/v541/re...

  Then, either to the low grade your vCM to 4.4.7 (it must be a vCM-100-2000)

  -It is without doubt an image vCM 4.4.7 out there somewhere, but it might be difficult to obtain.

  - or just use the "copy... install" on your vCM, to get downgraded.

  or use the method 294 (same method applies)

  But as I see it, there is no need to play around wit ha secondary CM, you need not the cm to ensure optimization, when things are running.

  You can easily change a CM for a configuration accellerator and charging, unless we take to vWAAS, where the image of the egg is locked.

  don't forget to make a backup of your CMS database and put it elsewhere, before you start the upgrade.

  Best regards

  Finn Poulsen

• UPGRADE OF WAAS CM

  Hello everyone

  I need some advice about how to upgrade from WAAS CM.

  How we improve a WAAS CM 5.2.1 to 5.4.1 unfortunately there is only a primary WAAS in the network and no secondary CM available now. I believe CM is the driver who comes to the Center manages CMS and pushes the policy. Are there objections to directly improve the CM primary without a secondary CM added to the system.

  Thank you

  Hello

  You are right, that the CM is not directly involved in the optimization.

  Follow the procedures described in the guides to relase notes/upgrade, and don't forget to make a backup of the cms database, before you start the upgrade.

  Be aware that a new version (5.4.1a) has recently been published, which (among others) fixed vulnerabilities in OpenSSL (not the BASH).

  Best regards

  Finn Poulsen

• WAE WAAS-7341 improved 5.3.3 to 5.3.5 and lost half of corporate communications

  Remote sites running running, 274 s or 674 s.  All 674 s run WCCP, all 274 s inline, main office running "inline" 7341, CM is on a 274 in the main office, it's always about 5.3.5.

  So passage of 5.3.3 to 5.3.5 broke 60% of all corporate communications.  I have since downgraded to 5.3.3 however back, to 5.3.5 all SSL traffic has failed, Exchange e-mail failed, SAP Logon failed and a portion of the CIFS traffic failed.

  I turned off WCCP, in a site remote, everything has worked, on return, everything has failed.  Interfaces of the inline in the main office Shutdown worked.  Downgraded the main office of 5.3.5 to 5.3.3 and all worked, same places running 5.3.5 had no communication problems when the seat was demoted in 5.3.3.

  I like downgraded most of my places to 5.3.3 still 4 5.3.5 running.  Don't know if anyone else had problems in upgrading to 5.3.5 and just wanted to put out there.  I've been on a version more version 4.1.x - 5.3.x and have never had such a complete and total failure, as I had to 5.3.5.  There have been incidents during updates where I lost SSL or had problems with e-mail and there was always a quick work around to solve.  This time, I didn't know how to look for a solution to "the sky is falling!"  And decommissioning took less time than the composition of this post.

  Everyone has upgraded to 5.3.5?  Have you had problems after the upgrade?

  Hello

  Please see the next section of the 5.3.5 release notes.

  I guess your 7341 principal is "inline". There is a known issue with inline card:

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/v535/WS...

  5.3.5a version just came out with the fix.

  If you are deploying the WAVE-274/474/574 or WAE-674/7371/7341 devices with a card online as a device of edge or core wide area acceleration engine (WAE), Cisco does not recommend that you upgrade to Wide Area Application Services software Cisco, Version 5.3.5. This can cause data corruption when data are sent to the client. For more information, see CSCun85976 . This does not affect your deployment if you use the WAVE-274/474/574 or WAE-674/7371/7341 devices Cisco WAAS AppNav or with the Communication for the Web (WCCP) Cache Protocol or if you use devices WAVE-294/594/694/7541/7571/8541.

  Hope that helps,

  Patrick Mubarak

  #42150 CCIE (security)

• WAAS Filesystem_size_mismatch alarm

  We have 5 waas devices, including the (4 512 wae, wae-674 1) CM from the CM, updated all devices to SW version 4.3.1.  After the upgrade and the devices got back online, one of the wae-512 s alarm reports 'filesystem_size_mismatch, one or more file systems have invalid size.'

  Book of alarm codes indicate possible causes such as changing of recent or method of manufacture of false memory.  No hardware changes happened on devices so I'm curious to know if anyone has faced this message or what can be the cause of this?

  I tried to reload the image SW once more (no effect) and the declaration of material see the command line seems to indicate that everything is ok.  Device seems to work other than the alarm that keeps showing up.  Any ideas would be greatly appreciated.  Thank you.

  Cool. If you please mark as answer that solves your problem.

  Kind regards.

• SRI-WAAS and AppNav

  Hi all

  Situation is the following. I have 2 routers x 4351-AX with the SSD upgrades and memory etc. Let's finish MPLS and other internet DMVPN or similar and both with RSR-WAAS configured.

  Is there an argument to have these set up a stand-alone WAAS devices or should they be in a cluster of AppNav? There are advantages and disadvantages to each method here?

  As Akamai Connect running on just the unit facing internet, does that mean it shouldn't be part of a cluster of AppNav?

  Thanks in advance.

  You should have configured cluster AppNav SRI-WAAS part. You can not have WCCP on the single Appnav SRI-WAAS interception.

  The new WAAS codes may work with Akamai to connect.

  http://www.Cisco.com/c/en/us/solutions/collateral/enterprise-networks/in...

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/V551/No...

• No service after upgrade the server to 5.2 on El Capitan

  I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

  I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

  I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

  Some additional info:

  I can connect to the server through ftp and other services; just no web service.

  Port tests show that port 80 is not blocked

  Using the IP address I can get to the window of the home server.

  Accessibility means no services available

  Websites is on and I can't find anything that is not defined in law or is different than before the update.

• I've never done a Time Machine backup and I have upgraded to iOS Sierra. Help!

  I'm a fool. After owning my Macbook for 5 years, I failed to make a single Time Machine backup. I just saved my essential to an external hard drive. I have upgraded to iOS Sierra. Big mistake. I want to go back to iOS Capitan, but it does not seem possible. Now, my external hard drive is wiped clean (things are dark). What are my options? If I'm stuck with Sierra?

  If you have downloaded El Capitan, it should always be available in your purchases. Now, you will need to make a backup to backup your personal files.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Yahoo Mail failure after upgrade of Sierra - iMac

  After the upgrade to Sierra... Now I find that I can't 'see' Yahoo mail... I tried to add the a/c: then the removal of the a/c. I get the Triangle of Hazzard indicating error account! I went down this loop for 2 days...

  All my other email accounts worked instantly. iCloud: Gmail etc.

  I tried to manually configure the settings...

  Everything seems 'normal'... but not a thing, no mail: no record... a real pain. the only joy that is web based too... If I can work...

  But, come on APPLE... This happens to my Yahoo mail whenever I update IOS... What is going on???

  I always seem to end up in a CHAT SESSION just to get my MAIL BASIC... This ISN'T a quality SERVICE...

  MAIL today, is a very basic service... Please, APPLE... issue a patch for us, the little guys

  Rant on.

  help, please, anyone...

  One user posted (Re: Sierra - Yahoo mail offline persistently) he has had success in choosing don't no Yahoo when you set up the account, but to choose the other and set up the details manually. You would like to try and see if it works for you.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

• What is the text on the lock below screen date, after upgrade to IOS 10?

  Hello

  I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

  What is - this and how can I remove it?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see

  Apple logo.

  It may take 30 seconds.

  See you soon

  Brian

• Stock app not news open stock since the ios10 upgrade

  tried to delete and reinstall. any ideas how to fix? Thank you!

  Hi AK@Ltd,

  Thanks for the upgrade to iOS 10! I understand that when you launch the app Stocks there are no headlines loading. Great way to try to resolve in uninstalling and then downloading it again from the App store. If this did not fix the app, you can try to make sure you have a good and stable internet connection. Also, check that your date and time settings are set to "auto detect".

  Get help with the date and time on your iPhone, iPad and iPod touch

  Restart the iPhone can do the trick as well. Restart your iPad, iPhone or iPod touch

  Please use the Apple Support communities to post your question. These measures should have your app Stocks giving you your new stocks as expected. Good day.