SRI-WAAS and AppNav

Similar Questions

• SRI-WAAS with two routers

  Hello!

  Is it possible to have two routers (including one with RSR-WAAS and the other without) on a remote site router without ISR-WAAS to use the ISR-WAAS of the other router? (I have only finddual router with dual WAAS SRI in the CVD).

  Concerning

  Michael

  Hi Michael,

  Yes it is possible.

  However, the Redirect method depends on what type of router without ISR-WAAS is:

  another report of research international-4000:

  You can use AppNav (the two routers in the same groups of Application Controller & the SRI-WAAS as the sole member af of the AV/Waas node group).

  almost any other router:

  You can use WCCP on both routers redirecting to the SRI-WAAS.

  Best regards

  Finn

• SRI-WAAS, Manager of plant by the name of "No.-HOSTNAME".

  Hello!

  Im trying to record 4 ISR-WAAS to a manager of the plant, but every time I run the installation procedure, the first SRI-WAAS record well, but with the host name NON-HOSTNAME; and the next SRI WAAS also. For this reason, I got an error message that there is another device with this hostname and I can't change it! ...

  Already try the command hostname inside the console of the SRI-WAAS, but does not work... I also tried to change the host name in the Central Manager, but I can't find the way.

  Any advice?

  Thanks in advance.

  captura_de_pantalla_de_2016-08-28_17-57 - 59.png

  

  Hello

  Looks like you're having Bug CSCuu23859.

  The SRI-WAAS release notes say that this problem has been fixed in the software v5.5.5 (according to the screenshot you run v5.5.1)

  BugSearch CSCuu23859

  SRI-WAAS release notes

  Best regards

  Andreas

• WAAS and quality of Service (Jacques)

  I currently have WAAS deployed in my environment. I would like to introduce you to David in order to avoid the overiding my network sessions. However, my engineer WAAS think that using WAAS would pose a problem.

  Question:

  At least once a week a user trying to ftp a large file by internet, which eventually cause saturation and performance issues. The internet is through the data center so evacuation qos is used.

  Internet - WAAS - router = MPLS = router - WAAS - customer

  Since there is no way to set entry in the form. And that would be not entirely help either. I need a session by session in the congestion management solution. So introduce WRED. Who's going to look like that.

  Internet---WAAS---Router===MPLS===Router--(wred)---WAAS---Client

  On the internal interface LAN's going to regulate the sessions of infiltration to the local network for the State of congestion.

  The problem for thought.

  Let's say that in a State of congestion THAT DAVID randomly deletes packages for reducing the size of the window of a ftp session through WAAS. How WAAS would meet abandonment random packages? These drops are going to the source of the packets to reduce or WAAS is she as a source? Specialty WAAS's performance, so it is supposed to compensate for the fall of packages. In this scenerio is WAAS the problem?

  If you are an expert in WAAS, I welcome your opinion.

  Hi Derek,.

  As you have known it WAAS technology runs on the TCP proxy feature by masking the real customers of WAN environment. Thus, any packet loss (whether because the WAN congestion or because of DAVID) will be handful of WAAS TFO (using BIC and BAG) and will not gas real customers.

  Also optimized thanks to the WAAS TFO feature automatically traffic supports the ECN of DAVID function also.

  I hope this information can help

• CSCuy98373 - Dead State SRI WAAS C4331 SN when running traffic with 3.16.02 XE

  We have the same problem as #CSCuy98373 with IOS - XE 3.17.02.S output (i.e. 15 (6) 1.S2).

  Be it resolved in the next version of 3.17?

  Hello

  The fix for CSCuy98373 in 3.17.02.S will be fixed in 3.17.03.S. ETA is early December.

  While on the subject of CSCuy98373, same problem is fixed with CSCuy32345 for 16.2 and 16.3 release trains.

  I hope this helps... Pascale

• can I call from sri lanka to the US and what are the rates

  I take my computer with me so I can call usa Sri lanka and what are the rates

  Beachbum wrote:

  I take my computer with me so I can call usa Sri lanka and what are the rates

  With Skype, your location is unimportant. Calls to (or within) the United States wherever you are cost 2.3 cents / minute or part of it.

  You can easily find the information yourself with a little research here:

  http://www.Skype.com/intl/en-us/prices/PAYG-rates/

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• Direction WAAS (547) lack of CM... can not add

  Hello

  One of our devices WAAS branch had the wrong host name, and I've edited our DNS/GANYMEDE and updated the hostname in the WAAS himself.

  I went to the plant manager and delete the old entry and is gone to the branch WAAS, cms enabled, disabled / enable tcp promiscuity 61/62 and WCCP is in place. I can see redirect happening on WAAS and the router but the Manager of the plant doesn't have an entry for the device WAAS. I can also ping the central Director of the WAAS and vice versa. Everything seems to work good optimization, but I can't understand why I can't see the hostname of the box in the GUI of CM. It's been two days and he does not appear.

  Here is the info from cms on the WAAS (IP omitted) branch.

  waxxx-1 a #sho cms Info

  Device registration information:

  Device ID = 321765

  Registered device did = WAAS Application Engine

  WAAS Central coach =                       

  Recorded with WAAS Central Manager =

  CMS information services:

  Cms_ce service is running

  Should I remove the partitions on the WAAS branch or something? I am at a loss.

  Thank you.

  Hi Julie,.

  Try to unregister the force cms.

  Kind regards

  Kanwal

• Helps of ISR 4321/ISR4331

  Hello

  We have two SRI

  An ISR4331 will be in the central and an ISR4321 on a remote site

  Is it true I have to configure my ISR4331 as a center of WAAS Manager and need to add ISR4321 to Appnav?

  I need design help

  I can't also connect to the ip address of my CM

  IMPOSSIBLE to activate the management services

  My interfaces are:

  Interface IP-Address OK? Method State Protocol
  GigabitEthernet0/0/0 192.168.9.1 YES manual up up
  0/GigabitEthernet0/1 10.5.36.100 YES manual up up
  GigabitEthernet0/0/2 unassigned YES manual down down
  GigabitEthernet0 unassigned YES unset administratively down, down
  AppNav-Compress1 10.5.36.100 YES unset upward, upward
  AppNav-UnCompress1 10.5.36.100 YES unset upward, upward
  Loopback0 10.4.48.150 YES manual up up
  Tunnel0 10.4.48.150 YES unset upward, upward
  VirtualPortGroup31 unassigned YES unset upward, upward
  Vlan1 unassigned YES unset administratively down, down

  My initial WAAS config is:

  ) a WAAS Image and size of profile:
  bootflash:/ISR-WAAS-5.5.1.12.ova (980541440) bytes
  SRI-WAAS-750

  (b) router IP/mask:
  10.5.36.100
  255.255.255.0

  WAAS Service IP:
  10.5.36.8

  (c) WAAS Central Manager:
  10.4.48.100

  (d) router WAN Interfaces:
  GigabitEthernet0/0/0

  Hello

  Yes that's right - you'll need either one:

  • Device of WAVE (a wave-294 will do)
  • a virtual WAAS (vCM) running on a hypervisor

  as plant manager.

  Best regards

  Finn

• Re: Satellite L850: how to get the approval number?

  I bought the laptop model above Satellite L850 UAE UNITED, but now I'm in Sri lanka.
  I had some problem with my hard drive and the system said that to replace the hard drive.

  While I contacted a provider in Sri Lanka and asked me to register the product in the site Web of Toshiba Middle East.

  So I registered on this site and then again contact the service provider, in this case, they said that they need the registration number to claim the guarantee.

  But yet I didn t receive the registration number of Toshiba.

  Can someone tell me when are they going to send me the registration number or there at - it another way to know the registration number for my product?

  Hello

  Checkbox + registration details search + Web site
  https://www.Toshiba.co.UK/innovation/JSP/vpoRegLookup.do

  + To search for your record, please enter the serial number, an email address and purchase date and click on the link '' search' "below. All fields are mandatory and must match your registration. +

• Pavilion 15 E014TX BIOS does not recognize the hdware, sort of drivers do not work

  I live in Sri Lanka and have a Hp Pavilion 14 E014TX Netbook, with 4 GB RAM, 750 GB HARD drive, camera, card reader, AMD Radeo 2 GB Graphix and other great benefits.  But unfortunately, none of the drivers work. AMD Radeon driver, for example, reports that the material is not present!

  MSInfo reports:

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of system HP-15
  System manufacturer Hewlett-Packard
  HP Pavilion 15 Notebook PC model system
  System Type X 86-based PC
  Intel Core processor i5 - 3230M CPU @ 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.07, 03/07/2013
  SMBIOS Version 2.7
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Hp-15\sadhu user name
  Sri Lanka time zone standard time
  Physical memory (RAM) installed 4.00 GB
  2.41 GB total physical memory
  1.36 GB available physical memory
  4.82 GB total virtual memory
  3.70 GB available virtual memory
  Page file space 2.41 GB
  Paging file C:\pagefile.sys

  Material is described here

  (1) can not find the drivers for my Win 7 32 bit Ultimate (legal, unpirated)- but others found with device manufacturers

  (2) I think it's maybe a BIOS problem, but I find no way on the site of HP to upgrade.

  Thanks for your help

  Thanks for help you, but it took the following for repair: 1) win 7 64 bit 2) use to reload the drivers for 'Hp pavilion 15-e016TU + 8 64 bits win7 readers' I certainly didn't use the 64-bit operating system, but it seems that I am stuck. I have this post to help others who may have the same problem - sadhu!

• Unavailability of the Sinhalese on update Android Lollipop (5.02)

  Sony has Sinhalese revmoved of their new update of Lollipop (5.02)

  I got my update Android Lollipop (5.02) yesterday for my Sony Xperia Z2 (D6503) and I'm really disappointed when I realized that Sony withdrew Sinhala (Unicords) update stock Android Google Lollipop. I know for a fact that since Android Lollipop (5.00) in rooms, Google had relased their Android platform, including the SINHALA language.  I don't know why Sony removed intentionally, and I believe, as a big fan of Sony, I have a right to know!

  Sony has been a brand established in Sri Lanka for so long and even without official support there are many people using Sony designers. It's something unjustand unaccpetable. You will never know the feeling when you can't read your native language on your phone.

  I believe that the ability to use a preferred language is a right as a user of Sony and you took this right to me when you have removed the language SINHALA new update of your device.   I would like to show you how it shows me my language on my xperia from Sony Z2.

  

  I don't know any user of Sony you feel even if they were to see their language like that. Even Google traslator now are the Sinhalese supported. and remove my telephone is unacceptable.

  I hope that the Sony team will take this issue seriusly and give me a positive response. I'm begging you to include Sinhala at the least the next update from. There are 20 million people speaking Sinhalese in Sri Lanka and also aroud the world. Sony must have Sinhala. If I don't have a positive feedback, this could be the last time I buy a Sony divide again. I'm sure the feeling is mutual with every Sri Lankan.

  So please!

  In the Android 6.0 update, we will support SINHALA rendering of fonts. This means that there are SINHALA content in an application, for example when you look at BBC Sinhala in Facebook, it will be made and you will be able to read it. However, the Xperia devices will not support Sinhalese as a language of the phone. We will not for example Sinhala menus.

• WAE free CM

  Mr President.

  We have two registered with CM already WAEs and optimize traffic. Now, after some change of routing, one of the WAE cannot access the CM more. It will keep the traffic optimization without access to the CM?

  Thank you

  Hi Joseph,.

  Even if you run some of these below in the CLI, it would be difficult to:

  • Monitor and maintain the WAAS system
  • deploy, or change the policies, etc.

  If your race with certificates or secure store, it would be almost impossible,

  So really, I suggest that you change the routing or get the problem fixed otherwise.

  Best regards

  Finn Poulsen

• command ' ip wccp redirect exclude in. "

  Hi all, I'll have trouble understanding how the command ' ip wccp redirect exclude in "and hoped someone would be able to give me more information on this subject.

  I know that it must be on the interface/subnet where WAAS is connected when "redirect" is used on another interface. I also know that it is used to prevent forwarding loops. What I don't understand is, why it is only necessary when 'redirect' is used, and not when "redirect to" is used?

  Thank you all.

  Hello

  Outbound loops are caused because, before the traffic is sent out of  an interface, it is first redirected back in to the network to the WAAS  for optimisation. Once optimisation is done, the WAAS then sends the  traffic back to the router. If the "ip wccp redirect exclude in" command  is not used on the interface that the WAAS is  connected to, when the traffic reaches the router's interface that has  the outbound redirection, it will then re direct the traffic back to the  WAAS and the whole process will start again (and will continue to  loop).
  If,  however, the "ip wccp redirect exclude in" command was put on the  router's interface that connects to the WAAS, when the WAAS sent the  optimised traffic back to the router, instead of the router sending it  back to the WAAS again, the router will know that the traffic should not  be optimised (or re-optimised in this case) so it sends the data out of  the network towards the WAAS at the remote site.
  

  Your understanding is 100% correct. This is precisely what is happening.

  Now, in  regards to inbound redirection, the reason why the "ip wccp redirect  exclude in" command (or a similar one) isn't required for inbound  redirection is because the traffic never reaches a redirected interface  twice, therefore a loop cannot form. For example, with outbound  redirection, the traffic hits the outbound interface, then gets sent to  the WAAS, then gets sent back to that same outbound interface that has  the redirection on it. However, with inbound redirection, the traffic  hits the inbound interface, it is then sent to the WAAS, the WAAS then  sends it back to the router and instead of the traffic being sent back  to the same interface that intercepted the traffic (as is the case with  outbound redirection), the traffic is instead sent out a different  interface on the router and therefore it is not intercepted again.

  Again, it is correct.

  Concerning

  Daniel

• Cisco ISR 4400 series SSLVPN Support

  Hello

  New series routers Cisco ISR 4400 support SSLVPN?

  According to the feature for this, but according to the document browser 4451-X Q & A is not.

  Does that mean I can or Canon use the AnyConnect client?

  Thank you.

  Kind regards

  Armand

  According to documents that I looked, new SRI (4300 and 4400) 4000 series doesn't support SSL VPN at all:

  http://www.Cisco.com/c/dam/en/us/products/collateral/routers/4000-series-integrated-services-routers-ISR/enterprise-routing-portfolio-poster.PDF

  http://www.Cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-ISR/series-comparison.html

  It is possible that the AnyConnect client may be still usable for IKEv2/IPSec VPN connectivity, but SSL seems to be off the table in these units.

  My guess would be that access the VPN feature is moved exclusively to the portfolio of the SAA, but which is slowed down just think.