WAE WAAS-7341 improved 5.3.3 to 5.3.5 and lost half of corporate communications

Similar Questions

• 'Improved' TB does not allow me to copy and paste from Word you can solve the problem?

  With the wonderful Thunderbird new and improved, I can not copy and paste Word text in an email because when I try, it has no line breaks. How can I fix?

  CTRL + SHIFT + V paste unformatted text.

  My guess is that Word is wrapping the text in a table to make it look exactly as it did in word.

• Will there be improvements made to the features of VPN configuration and firewalls in the ACC?

  Future versions of CCA will have the ability to set up the VPN site-to site on UC520s, UC540s and SR520s without having to use the Multisite Manager or CLI? With non-SBCS Cisco VPN products have a Cisco's GUI to configure site-to-site VPNs. The UC520, UC540 and SR520 are the only Cisco products (with the exception of products that have reached end of life status) who do not have this capability in a sort of Cisco's GUI (apart from the Multisite Manager of CCA 2.1 and later versions).

  Future versions of CCA will allow you to modify the firewall on UC520s, UC540s and SR520s rules without having to resort to the CLI?

  Almost all Cisco products, except for UC520, UC540 and SR520 series products, have a Cisco's GUI to configure these features. The SA520 and SA540, these features can be configured in the web GUI. The Cisco ISR, these features can be configured through SDM or CCP. CCA has always had the ability to fix UC520 unit, but he had not the possibility to fine-tune the settings of firewall and security, unlike the web interface SA500, SDM or CCP.

  Reasons why having the skills to the CCA is important:

  • These characteristics are indicated on the data of UC520, UC540 and SR520 sheets
  • The opportunity to refine and verify access control lists in the ACC can accomplish the following:
    • Ability to comply with HIPAA, Sarbanes-Oxley, PCI, etc.
    • Improved troubleshooting
    • Eliminates the need to use CLI to refine or verify the firewall settings
  • VPN site to site can currently be configured via CLI or the CCA Multisite Manager
  • Multisite Manager CCA can be used for virtual private networks between UC500 or SR520s placed in front of UC500 units units
  • CCA Multisite Manager cannot be used for VPN between autonomous SR520 units, or between a unit UC500 and endpoint non-UC500 (with the exception of a placed in front of a UC500 unit SR520)
  • All images IOS Supportepar UC520 units, UC540 and SR520 routers have firewalls and VPN capabilities described here

  Hi John,.

  The ACC is a configuration tool for platforms that are part of the SBCS solutions. Multisite manager is the approach we take to configure a VPN site. Enchancements in customization of the firewall and access lists is something we plan to put on the roadmap. We will continue to improve the CCA to meet these requirements. We will schedule to get these features added in the 2010 calendar.

  Thank you

  Saurabh

• Tips on improving the graphics for the app for iPhone and iPad

  I'm creating an application for iPad and iPhone 4 and it looks terrible on the iPhone 4.

  I created the Flash file in Flash IDE with Movie CS5.5 size 1024 x 768 and I use the AIR according to the parameters of IOS:

  Rendering: CPU

  Device: iPhone and iPad

  Resolution: high

  All of my graphics are vector, so I assumed that it would be the crisp air on both devices. It is not as perfect as you are looking for on the iPad as it appears on my PC screen, but I can live with that. However, I can't live with the appearance of the iPhone 4.

  So I'm looking for advice on how to improve the appearance of the iPhone 4.

  As far as I know, there isn't a way to use the 2 sets of graphs, one for each device. Please correct me if this is wrong and she would offer me a solution.

  Do all the graphics in PNG would be a solution?

  BTW I use AIR 3.2 SDK if that has to do any and my graphics are static.

  Thanks in advance.

  Nice vectors will look depends on the setting of stage.quality. Try it on medium or high instead of low. In addition, CPU or direct is likely to give more beautiful than GPU vectors only.

• I improved my Time Capsule 7.7.7 firmware and now I get a message that the "internal drive must be repaired.

  My backups Time Machine regular started for lack of shortly after the 7.7.7 upgrade. I get the message about how for example inside "must be repaired. I have tried power cycling on a regular basis and also downgraded to 7.7.3; Nothing helps.

  Would be a broken drive reset hardware, or is help now? This 7.7.7 was - or just a coincidence?

  I don't think that the upgrade has been more than straw... but on the already busy camel, he broke...

  How old is the TC? Do you still warranty or applecare... no matter what computer, an ipad, or AppleTV with applecare purchased within a period of 2 years from the purchase of TC and still current is valid. Apple will replace it.

  If it's less than 2 years Apple must always replace if you buy the applecare on any device you own always under warranty 1 year. Or buy a new Apple TV with the applecare and return immediately the appletv to get the TC replaced under applecare.

• I've improved 3.6.13 to 10.0 and lost my login information from web site for most (all?) of my favorite sites.

  Firefox remmembered my connections with 3.6.13. After upgrade, no connections years.3 not filled when I go on the site.

  I tried to look at my profile. The only profile I can find is obviously created by 10.0 and it does not contain my old login information. Is a backup copy of the old profile anywhere? I have searched but can not find. Is it possible to restore the missing profile?

  Thank you, g. Hunter.

  --> Updated Firefox to version 10.0.1

  • How to download and install Firefox on Windows

  Follow the suggestions mentioned in the following articles:

  • Google toolbar is no longer compatible with Firefox - here are a few alternatives
  • Re-enable the Add-ons that have been disabled when upgrading from Firefox

  Check and tell if its working.

  Not related to your problem, but some of your Firefox Plugins are outdated

  • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
  • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)

• Just improved numbers in the version of las and lost all my data... Is - is this posible? Can I get it back?

  Been using the numbers for several years, and has never had a problem... Updated several times and still worked ok.

  Earlier I did upgrade to the latest version and it erased all my worksheets...

  can I recover this data?

  Help, please

  If you work on documents in iCloud, they are probably still there. On a Mac, open a session with your Apple here ID: https://www.icloud.com and click the numbers.

  If you work on documents locally stored numbers, then they would need to be restored from an iTunes backup created before the upgrade.

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers

• pop up message from microsoft: improved access anti malware protection has stopped working and closed

  Im having trouble surfing the net right now because this message from microsoft begin to appear recently and continues to reveal every 5 minutes while im doing something on my laptop. I tried to ask the help of microsoft, but received no response yet. I even reset my internet explore thinking that might help. I don't know if this has to do with my panda anti virus I just install a month ago. I looked up my security settings and theres a green light it under malware protection, saying that my anti virus is not compatible and its reports on its status of windows that is no longer supported. Please help me undestand so this problem and if I have to change. and what am I going to do to solve the problem. Thank you!

  Hi Boy.

  Uninstall the security software and check if the error occurs. If not then you may need to contact the manufacturer of the antivirus software.

  Note: The computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Link, please refer to: disable antivirus software:http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  You can also check out the link below:http://support.pandasecurity.com/forum/viewtopic.php?f=72&t=3462

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IMPROVE the BRUTE &. DNG WORKFLOW IN PREMIERE and AFTER EFFECTS

  I am editor-in-Chief, and I work with raw. DNG files more over the past two years.

  Image with the RAW settings controls are amazing off course.

  But not the controls that Adobe provides to editing the .dng files. I find this workflow to be stoneaged, extremely devious and far from effective.

  THESE ARE THE METHODS of EDITING I USE (September 2016, adobe cc 2015.3):

  (1) for editing the .dng files I must interpret my shots with the RAW importer in After Effects. Then export every time with these settings in the format Prores out of After Effects. That will become the images then in first. The render time is huge, place to three days of rendering time for some projects of greater that I worked.

  (2) a very intensively and your working time is as follows:

  • Import each shot like .dng in first (one-by-one, at the same time is not possible (adobe feature request).)

  • In order to be able to change with it, you can edit the RAW temperature, tint, and exposure settings (adobe feature request: integrate all the raw settings as you did with Lumetri).

  • Then there are several ways to do it, I do it like this: I put all the photos in a calendar on the same layer.

  • I have duplicate all the shots to the upper layer.

  • I select all the photos duplicated and then right click: ' replace with after composition effects.

  • You go to sequels and then ask the parameters for each individual shot raw. You set the parameters of all your shots. You will only be able to see the first image of the sequence, so if you are working with a Committee of action, you will only be able to see the first image. (adobe feature request: make it scrollable of sequences of images, so within the RAW screen importer I wish I could scroll through other images of this sequence)

  > > You can open another frame of the sequence of images just from the finder and then open with photoshop, the RAW importer screen will invite, adjust the settings and then export these settings. Then - later - you can load these settings in After Effects by right-clicking the sequence in the project window and choose "replace footage > > file" and then it will prompt you again with the RAW importer window). Pfff, so sneaky and ineffective all together. (adobe feature request)

  • When the settings for all plans are finished, you will find all the plans in a composition. BUT these layers will appear UNFORTUNATELY have been interpreted as images (image .dng) instead of sequences of images (photos/film .dng). (adobe feature request)

  • Up to now, you go the project window and you select the first shot, do a right-click: "replace sequences > > leader." Select the first file .dng and enter. The RAW importer appears again, thank God he reminded of the settings that you have applied to this .dng, os, you don't have to do it all over again.

  • You repeat this operation for all your shots.

  • Then in your timeline first you should have two layers with the same shots, the linked AE comp will be with the interpretations of right and the bottom layer with the original .dng files. You can enable or disable the layer on and outside, by providing a much faster workflow for editing. Type to have created a proxy system.

  -But then a European problem can occur: If all the shots in the AE comp seem to be shorter then in your timeline in first you do this:

  • In After Effects, go first .dng sequence in your project window. Right click, choose "film > > main.

  • You can select the frame rate, set it to 25 if you are working with 25 images per image (to check in settings to create sequence) captures. (adobe feature request: use the same rate for this interpretation as first has done, or ask, and remember this choice)

  • THEN, SEVERAL HOURS LATER, depends on how much you have pictures, you can begin to find a way to edit first. You can nest the sequence in which the original dng sequences and the composition of linked EI are superimposed. If you do not have to edit with two videos and several audio blocks above the other.

  For editing with the org .dng files, you can adjust the base temperature BRUTE, hue settings and exposure in first, so you can see what you're doing. For most RAW images are very dark without the RAW settings, so who can help when your first change in flow when the AE comp is off.

  • When you want to change the raw settings, you can go to sequels, open the project and then choose: "replace footage > > leader." Then importing RAW window again and you can make the change. It is now automatically charged also in first due comp system that you built.

  For a film RED and ALEXA it's organized all much better...

  So now I ask Adobe:

  WHY is WHY WHY like that?

  Two years ago, it remains unchanged.

  I am a very big ADOBE fan and faithful, programs and innovations are impressive. Lumetri is impressive. I hoped he would also modify the RAW data, but unfortunately it doesn't.

  This lack of a good system of RAW editing really pushes me away Adobe right now. This isn't a professional workflow.

  If several editors have the same types of problems, please reply to this post with your opinion.

  Perhaps, it helps a little pushing Adobe to change this.

  And if someone has a big piece of something I'm missing, please please enlighten me. I won't be arrogant kind.

  I can't find the right answer to this workflow of the stone age, and I guess that most people will know it.

  WHY is WHY WHY like that?

  I'm not convinced that it is.

  The only part of your post, I found valid is where clips must be imported one at a time.  It's true, and Adobe certainly should to address the issue.  But both, Blackmagic and other responsible camera must also decide, releasing updates of firmware that create the MXF files to hold the CinemaDNG RAW images, audio, time code metadata and in a single file.    No records, no covering.  A clip, a single file.

  This is technically possible and it is the best option in all areas.  For each Adobe feature request, so we need to request a Blackmagic as well. Two actually, because changing the way in which the cameras record is good the best option.

  Other than this one problem, I don't see where everything you do is necessary.  Lumetri now accesses the RAW data in images CinemaDNG, is not only an effect on top as fast color corrector.

  Using the new feature of Proxy editing is done MUCH easier.

  I see no need for the AE in the pipeline.

• I have improved my LR 6.1 to 6.3 and since then I get an email from Adobe is saying my trial version of Lightroom is about to expire.

  Why is it when I have the full version and have done for many years? When I start Lightroom and select updates, it starts Adobe Creative Cloud. I didn't want this app, but if I try to uninstall, it says I can't do that "you still have creative cloud applications installed on your computer which punish it." How can I get rid of this software? I did start Lightroom and go through the process of ' closing the session - connect and provide my serial number. According to my Adobe account, I have all my Adobe apps correctly listed. If I try to connect to Adobe CC, she immediately comes back and says "you have been disconnected.

  
  

  Hi,

  Use the uninstaller Office CC: CC help | Uninstall the creative desktop application Cloud

  Hope that helps!

  Kind regards

  Sheena

• Font Myriad Pro improved and lost

  I just upgraded to Lion on my Mac and Myriad Pro is no longer in the list of fonts in Illustrator CS5. It is still in Photoshop CS5 and font book, but it seems as if just Illustrator does not recognize it more suggestions?

  You can download finagler fontsor OnyX, find, or delete all your. LST (eg:AdobeFnt11.lst) files or the use of the terminal.

  Here is where the fonts should be:

  

• driver problems audio dv7-1270us

  I just bought my Dv7 1270 and I've upgraded to Vista Ultimate.
  There are no drivers on the view for the 1270, so I found the IDT of the other drivers to try as well.

  The problem is, there are 3 speakers on this laptop, and use only the top of page 2, nothing is detected.
  
  What's wrong?

  Same thing here! I've improved my dv7-1240 to vista ultimate 32 and lost my right speaker. To reinstall the many drivers after the upgrade, but now I'm totally distraught. Did not play with it before the upgrade but suspect that to be the
  
  I LH speaker sound and I guess I HR channel via the subwoofer. Headphones work fine.
  
  In any case good I found this post because it cost me a lot of late nights... I need sleep.

• How remove "improved new tab" is the substitution of my settings

  After latest updates my PC my new tab button opens does not improved new tab by clicking the gear icon and change the settings. Just open up a blank page. If I pin google then I have a minnie google page appear and then click on that to open google. I have my topic: config page set to go straight to google when I opened a new tab, but these settings do not work anymore. I do not appreciate mozilla change my settings without my consent. If I wanted an application followed my every move and keep a running tally of my most visited sites and then have to inform me of that information every time I open a new tab then I would have installed such an application. When I click on the sign more to open a new tab, I expect to open up the web page of google I set it to open at no other fanfare.

  In Firefox pref browser.newtab.url 41 disappeared. This pref was abused by malware so frequently that Mozilla has decided to remove this pref to eliminate this kind of diversion.
  You will need an extension like this one to restore.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-override/

  Or to have your home page as the new tab page, try this extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-homepage/

  If you are using Classic theme restaurateur, go in the CTR options > tabs (1) article and set your preference for the new tab URL here.

  For Super Start , you can use the topic: superstart page.

• Time Machine "to improve reliability TM must create a new backup" - what choice do I have?

  The popup says "Time Machine completed a verificaion... to improve reliability TM must create a new backup" and goes on to say all my existing history is deleted.

  Our time Capsule is shared between mine and my husband's computer.  There are still 1.2 to he left.  The message tell me where or what the problem is - this time Machine to my computer or is it the time Capsule?

  Could simply upgrade to El Capitan correct the problem?

  Thanks for any help,

  Lynne

  http://pondini.org/TM/C13.html