5.6 ACS authentication problem

Similar Questions

• With Ganymede ACS authentication problem

  My organization was using ACS with AD to authenticate users for access to network devices.

  But lately, it does not work. There has been no known changes.

  Can anyone help point the possible problems or links to see how the actual configuration of the CSA to be or look like for that to work.

  My apologies if this is naïve question, am not not so easy with ACS.

  Thank you!

  Hello

  There are two ways to correct the message 'windows dialin permission required. You can either add permissions to call on the user accounts on your database of Windows, or you can remove the option "Require Dialin permissions" ACS. To do this, go to "External user databases" and select "Database Configuration". Then go in your database of Windows and click "configure". The first option is a

  box that gives you the opportunity to "make sure that grant dialin permission is checked.

  Checking this box will cause the error you get if your windows users do not have permissions to call. If you uncheck this box, it must clarify this.

  HTH

  JK

• Authentication problem when you try to connect

  I have a Linksys router. Connected WN2000RPT as described in the instructions of Netgear. Everything went through the lights very well, good, EXT appears on the scan available networks, etc. Tried to connect a Smart TV Vizio and burn TV Amazon tablet Asus. All 3 devices show... EXT with a strong signal. However, each device does not, connect with an error message 'Authentication problem' or simply 'cannot connect."

  My router is connected using personal safety ' WPA2/WPA mixed. " When you configure the wifi extender, I said to use the same SSID and the security that the router setting. Online reading on the settings available on the WN2000 and decided that the problem was perhaps a "lag" in the security implementation because WN2000 is not the same as available router setting. Do you have a factory reset on extension and returned to through the procedure, only not selected use the same level of security as a router, but manually selected WPA/PSK (AES) for the Extender. Same exact error of my devices as before.

  I thought that maybe by using the security settings of the router it was to spoil the Extender because they do not have the same settings available. But perhaps using different parameters (when the Extender receives the signal from the router, but perhaps on a "pass-through" only basis?) problems as well?

  So, can someone tell me if there is a way to get my devices to connect to the Extender, or this is always going to be a problem because the router has a security setting, and if I manually set the security OR say scope to use the same security settings, it will not work because the two units are not compatible? I'm doing something wrong? Any ideas? Thank you!

  Hello RealisticDave

  Did you have a different SSID on the router and not the same as routers SSID?

  DarrenM

• Yoga of 1050F WiFi authentication problem 2

  Hello

  I am a new Member and just upgraded to 5 android. Seems a big mistake because it is unable to connect to the internet (no problem with android 4) says authentication problem. Tried cancellation and re - enter password, router turning on and off power and factory reset. Nothing. If Lenovo come with a repair how will I be able to get into the Tablet when I have no internet connection. For the moment, I have a tablet which is equally useful as a tile. Help

  Hello

  Just disable IPV6 in your Inbox, because Lollipop use IPV6 (default) and some box are not entirely compatible.

• BIAPPS-ODI authentication problem

  Hi friends,

  IM at biapps 11g with ODI 11 g. I configured connection odi in the studio and can properly connect to see these maps std BIAPPS in ODI.

  But 2 days before, im in the face of an authentication problem by connecting the ODI studio with the user who I connected successfully forward.

  The error that I'm facing here is the

  ODI: 26130: could not connect to the repository, ODI-10190: user dev_biadmin has his account has expired.

  
  

  Im getting the error above and the user tried to connect is "dev_biadmin" in the studio of ODI.

  
  

  Therefore, to the question above, I followed the MOS score below

  
  

  ORS Installer fails with ODI-10190: user FUSION_APPS_PROV_PATCH_APPID has his account has expired (Doc ID 1666023.1()

  
  

  IM facing the same error explained in the note above, but force helped me because it treats FUSIONAPPS BI I guess.

  
  

  Kindly advice me friends, to solve this problem.

  
  

  Brgds,

  Saro

  Hi, Saro,

  Connection to studio ODI as a SUPERVISOR user. Go to ODI--> Switch authentication mode--> give your contact information to ODIREPO and sign in.

  You will get the message properly connected. Click the Security tab. try to connect as a SUPERVISOR. Once the connection is successful. Go to the user of the cprresponding (dev_biadmin) account and change the password.

  Logout and go to ODI--> switch authentication mode. Give the details. It will change external authentication. Now you should be able to log in as dev_biadmin.

  Hope this will solve your problem...

  Kind regards

  Vanina

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• Cisco ACS taccas + problem with authentication

  I'm having a problem authenticating to a switch using taccas + my ACS 5.2 server. I can actually do a 'test of aaa group taccas + username password inheritance' and returns a successful user authentication. When I try to use this same account to authenticate the switch, it is unsuccessful, and I'm not even that attempt to hit GBA.

  Most likely, is a configuration of Miss of the AAA command on the switch.

  Sent by Cisco Support technique iPad App

• ACS report problem

  Hello...

  I have GBA 2.6 (4) 4 and all the problems are happening:

  Authentication and authorization of the NAS work normally, but the accountants do not work properly. If I use accounting only exec, in the report connected' GBA users appears; OK, if I add the accounting level 0, 1 or 15 commands, users appears in the report is 'connected', but if I use any command (enable, show..., debug, etc.) users disappears in the report and that commands are presented in TAC + administration. I tried using ACS 3.1 and accounting works normally.

  Is this a BUG? If not, why I solve this problem?

  the configuration of my equipment is:

  ======

  Cisco IOS 2620 (C2600-I-M), Version 12.1 T7 (5)

  ======

  Console rate-limit logging 10 except errors

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA authentication ppp default to group Ganymede + local

  authorization AAA console

  default AAA authorization exec group Ganymede + none

  default network AAA authorization group Ganymede + none

  AAA accounting update newinfo

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  ====

  TKS.

  Yep, it's a bug.

  See http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCdv61239

• ACS authentication with Active Directory based on ad groups

  Hello

  I'm trying to integrate Cisco ACS 5.4.0.46 with AD and I connected successfully GBA to AD and I used as a successful AD authentication for network devices but my problem now is that anyone with an AD account can connect to network devices that compromises security. I created a group in AD that I would use and I added the group under users and identity stores > external identity stores > Active Directory > groups directory. I also chose source of identity for Default Device Admin as AD1 and under the authorization, an authorization policy that uses a compound condition that uses AD1 and the custom group. However after you have set all that I am still able to connect to the switch with a user not in the custom group. Based on what I have explained to you can someone tell me if Miss me a step?

  Thank you

  Derek Velez

  Thanks for the update and the fence wire. Set default default rules to deny access when user legimitate if does not match a rule set by the administration of the CSA he should get denied access. In your case, it has been updated a permit so that both type of users access (members and non-members of ad groups).

  The best way to resolve these issues is to look at the monitoring and troubleshooting > attempt user > magnifying glass. You will see how this user has been allowed access.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• In an another (trusted) domain bij Agent ACS ACS authentication

  Hello

  I had two areas. Domain A is the top level domain. B is the child domain of the domain A.

  The ACS Agents are installed on two domain controllers in domain A.

  Authentication of clients in domain A is ok.

  Authentication of clients in domain B is a problem.

  I created a universal group in the field. In this universal group, I put a global group of users from the domain b. authentication not ok.

  The ACS "Journal of authentication failed": SAIS: "external DB account Restriction".

  What is the problem here?

  Gr.

  Remco

  Check if users are not mapped to a group of people with disabilities. Do not map several windows for ACS group groups. The following link can help you

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/QG.html

• Secure ACS Authentication and Authorization with SecurID

  I am able to authenticate connection attempts using an external database (RSA SecurID).  The problem is that everyone with a token is authorized to connect on any switch with priv15 or whatever I put (but no way to control who gets what access).  How can I allow users based on a certain type of belonging to a group?  The SecurID server is already integrated with LDAP, it only checks to see if the user exists in the database.

  I need to create two groups, or even only allow a single group and deny everyone, but anyone in the organization with a token is allowed to connect.  I can't find guides who do anything beyond authentication when you use a SecurID token.

  Thank you.

  Hello

  Have routers and switches, you given the command "authorization exec default group aaa GANYMEDE", it seems that you have only defined authentication on devices. When the control is in place, user access privileges may be governed by the ACS. In network administrator access by default policy (if you are using the default strategy for GANYMEDE), to set the authorization rule to verify membership in a user group and provide the appropriate profile of shell. Make the default rule to give DenyAccess shell profile to other users.

• Cisco ACS authentication issues

  Hi all

  I have just set up my ACS for Windows Server. It runs version 4.1 software. I have problems for authentication. I have my setup in the GUI of the ACS use Ganymede to authenticate the AAA Clients. I have the key in the switch and the corresponding keys to ACS server. I have facility users. Here's my config AAA on the switch...

  AAA new-model

  AAA authentication login default group Ganymede + local

  the AAA authentication enable default group Ganymede + activate

  Here is the information of debugging on Ganymede

  183757: 2 sep 10:14:22.131 edt: TAC +: send worm package AUTHENTIC/START = 192 id = 2789804961

  183758: 2 sep 10:14:22.131 edt: TAC +: using Ganymede server-group "Ganymede +" list by default.

  183759: 2 sep 10:14:22.131 edt: TAC +: opening TCP/IP 10.11.8.200/49 Timeout = 5

  183760: 2 sep 10:14:22.135 edt: TAC +: handle opened TCP/IP 0x80E767B8 to 10.11.8.200/49

  183761: 2 sep 10:14:22.135 edt: TAC +: 10.11.8.200 (2789804961) AUTHENTIC/START/CONNECTION/ASCII queued

  183762: 2 sep 10:14:22.335 edt: TAC +: (2789804961) AUTHENTIC/START/CONNECTION/ASCII processed

  183763: 2 sep 10:14:22.335 edt: TAC +: received bad AUTHENTIC package: length = 6 expected 128683

  WC2950-12 #.

  183764: 2 sep 10:14:22.335 edt: TAC +: invalid package AUTHENTIC/START/CONNECTION/ASCII (control keys).

  183765: 2 sep 10:14:22.335 edt: TAC +: connection TCP/IP closing 0x80E767B8 to 10.11.8.200/49

  183766: 2 sep 10:14:22.339 edt: TAC +: using Ganymede server-group "Ganymede +" list by default.

  183767: 2 sep 10:14:22.339 edt: SSH1: password for wcromwell authentication failure

  I have the same keys on the AAA server as I do on my switch...

  Thank you

  Please check the secret key of NDG and main aaa clients. NDG substitute main aaa clients.

  Make sure you have the right key in NDG >

  Kind regards

  ~ JG

  Note the useful messages

• NAR ACS Configuration problem

  Hi all!

  I have a problem with the configuration of the network access restrictions.

  I put the function through the shared profile component and group level NAR also, but none of them doesn't work.

  My test AAA client is a simulator of customer RADIUS of VASCO. I thought that this software does not send the correct RADIUS attributes, behavior of the ACS is never prohibitive, but sometimes, it should be.

  I also tried with version 3.2 and 4.2.

  Y at - it a tip or something that I messed up?

  Thank you for the answers!

  For wireless users, you must use CLIS/DNIS based access restriction.

  If you the corresponding IETF Radius user wireless access point, basic authentication should work, but question would be with a part of the authorization.

  Kind regards

  ~ JG

• 4.2 ACS authentication and exec flank on router Test mode.

  The goal is to have GBA authenticate my username via ssh and let me go once authenticated privileged exec mode. Details below.

  I have ACS Solution engine 4.2 and I have a router to test with the following commands:

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA - the id of the joint session

  RADIUS-server host 10.4.4.21 single-connection

  RADIUS-server key $# $& $* #.

  The problem is the following. I can't SSH and login to the router using a user in the database of the CSA but the router does not allow me to use the enable command in exec mode. The error it gives me is:

  AAA_ROUTER_CLIENT > activate

  % Authentication failure.

  AAA_ROUTER_CLIENT >

  I must be missing something in the ACS. Any help would be appreciated.

  You are missing this command

  AAA authorization exec default group Ganymede + authenticated if

  That's what you need on router

  Router (config) # username [username] password]

  GANYMEDE-host [ip]

  radius-server [key] key

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + authenticated if

  The GBA

  Bring to users/groups at level 15

  1. go to the user or to set up groups of ACS

  2 down until "settings GANYMEDE +".

  3. check "Shell (Exec).

  4 check 'Privilege level' and enter '15' in the adjacent field

  Kind regards

  ~ JG

  Note the useful messages

• GANYMEDE + SSH authentication problem Fo ASA

  Dear Sir

  I managed an ASA 5540 assets/failover pair. SSH authentication is performed via GANYMEDE + ACS located 4.2 in the same VLAN as the inside interface of the firewall. I have added two firewalls on the ACS using their inside as the interface IP addresses (using addresses active and reserve). I can succesfully authenticate and connect to the ASA assets without any problem. But on the SAA on hold, I get SSH prompt but I couldn't connect. When I see the log of failed attempts under GBA, I noticed that "Unknown SIN" for the ASA. How can I solve this problem?

  Best regards

  Abebe Amare

  Engineer network, VivaCell

  Hi Abebe,

  On the ASA high school, please check the following:

  SH failover---> and make sure that the secondary image is waiting ready and not missed.

  HS-Server aaa---> check the output and see if the ASA marked the radius server under the name 'UP' and the exchange of packets.

  Activate the following debugs and perform an authentication test as shown:

  Debug aaa authentication

  debugging Ganymede

  Debug ssh

  aaa-server host username authentication test "insert name of" passes "insert a password."

  Provide me with him debugs after taking on your username in it so that I can analyze.

  See you soon,.

  Christian V