Delay between VISA W/W and chain problem

Similar Questions

• difference between VISA READ buffer and chain

  Hello I'm just starting to use the VISA read and write the function in labVIEW

  everyone knows what are the degree between reading VISA and the string buffer? and the comparison of the VISA Write buffer and chain

  Thank you

  Ein salvation,

  "read buffer" is the string given by VISAReadlabel, "write buffer" is the label of the string that is expected by VISAWrite!

  There is no difference...

• Start-up delays between the Windows startup and the logon screen

  I have two PC's that have essentially the same Intel motherboard, but with different form factors. The smallest has a less powerful CPU and a slower hard drive. Still more has a significant delay between displaying the logon screen and Windows startup. Between the two, the display shows a cursor that cannot be moved through the mouse for 30 seconds or more, while on the smaller than the slider shows only for about a second.

  I realize, the problem could be many things, but I'm guessing that material or a device sound driver. I watched the event logs, but I couldn't see anything strange. I expected to see a "CPU does not ' or"USB 3.0 controller has a hardware problem"kind of thing. I ran Intel IPDT but he did not find a problem. Device Manager displays all of the problems. There is no graphics card on a system. I unplugged the USB cable to the printer, but that did nothing. No games are installed on a system. Nothing seems to be overheating. There is no network drive. All drives are SATA and BIOS is set to AHCI.

  Someone at - it the words of wisdom about what should I look for in the event logs?

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good antivirus program
  2. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure
  3. I would like to be sure that none of the drives are more than 75% in use
  4. I would check my memory using the auditor memory Windows 7
  5. I would like to install and run Autoruns to check what is in the startup process
  6. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.
  7. Remove Programs/applications from starting unless I really need to start

  Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer

• How can I impliment a delay between the analog output and analog input (started by an external analog trigger)?

  I am acquiring several channels of analog voltage input at the same time, I need to send an output analog two seconds after the start of the entry.

  I'm running an experience with accelerometers on a query table.
  I start the trigger and the table remains still for two seconds, which allows a reference level for all sensors.
  Then the output signal of the VI removes the break in the motor controller.
  The speed measured by the encoder is sent to one of the input channels.

  In this way, our accel and speed data are synchronized.

  After it acquired the analog input data out put must be reset to zero.

  MULTI.vi

  I've updated the link above works of VI, I used a property node to solve the problem.

• Delay between two operations in the same visa write buffer

  Hello

  I'm new to labview and have tried to find a way to introduce some delay in milliseconds between two operations in the same buffer of writing a block of single entry visa. Here's what I want it to be like:

  CURR: LEV 1.5

  wait about 50 ms

  CURR: LEV 2.0

  wait once again

  In fact, I must apply an alternating signal to a coil with a certain frequency through a source of supply of power e3631a Agilent. So if there is another alternative for her, so please let me know.

  Thank you

  Concerning

  Here are two approaches. First being the easiest, simply put a delay between written VISA. The second being a more robust because it allows you to develop a series of commands by simply adding the string array. You might forget the case of the loop if you don't mind the 50mS delay before e first command is sent.

  

• I visit my daughter and they have DSL but it so slow and Facebook does not completely load. How can I know what the problem is and fix it?

  I visit my daughter and they have DSL for the game but not a computer. I can connect to the internet with my laptop very well, but it is so slow and especially never finishes loading. Unable to get Facebook and Farmville to load correctly how to find what is the problem and ffix it? Its driving me crazy!

  Hi DonnaSuttles,

  ·         What operating system is installed on your computer?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the article mentioned for more information:

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Let us know the results.

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Delay between the addition of peripheral support and to be visible?

  I added a device supported in the portal provider. When I disconnect and reconnect and check, it is there in the list of devices selected for this version. However, it does not appear in the list of devices if I check in the App World. Is there a delay between the addition of new devices and them being visible/allowed to download? How long is it? Or is there something else I need to do to add new devices supported for existing versions?

  I believe that the original deadline for metadata changes is nominally a day, while there may be further delays (up to a week?) so the App World client is caching information. I don't think that there is a good description of what exactly is subject either of these delays, but it's a good bet that you will see at least one. These are probably not involved if you view App World via a web browser.

• Problem with VLAN between Cisco Catalyst (3560G) and SG300-52

  I am having trouble with the creation of a trunk of vlan between a SG300-52 and a Cisco Catalyst 3560 G.  I have 4 VLANS (1, 2, 10 and 11) on the 3650 and I need ports on the SG300 to be able to communicate with them.

  On the 3560, port 14 is defined as:

  interface GigabitEthernet0/14

  switchport trunk encapsulation dot1q

  switchport mode trunk

  spanning tree portfast

  On the Sg300 port 52 is defined as:

  interface GigabitEthernet52

  point to point link type spanningtree

  switchport trunk allowed vlan add 1,2,10,11

  description macro switch

  Try to understand what the problem... Any help would be appreciated.

  Thank you

  Chris

  Hi Chris, the first problem is the spanning tree portfast, it shouldn't be on an interconnection network switch. You may have a mismatch of vlan native as well, but that shouldn't matter.

  A suggestion, however, the value of the port SG300 general mode and disable the input filter.

  -Tom
  Please mark replied messages useful

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• Problem link DB between active Data Guard and reports application database

  My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
  I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.
  
  SQL > select name, database_role, open_mode from v$ database;
  
  NAME DATABASE_ROLE OPEN_MODE
  --------- ---------------- --------------------
  ORCL PHYSICS READ SHALL ONLY APPLY
  
  Detail of the problem is less than
  ------------------------------
  I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
  SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
  Database link created.
  
  But when I run a query using db link to my database of enforcement report I got this error below.
  
  ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
  ORA-02063: preceding the line of DATADB_LINK
  
  Then I see logfile named database alart Active Data Guard and get below error
  
  ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")
  
  But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.
  
  So it's a problem of link DB between active Data Guard and other databases?

  Fazlul Kabir Mahfuz wrote:
  My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
  I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.

  SQL > select name, database_role, open_mode from v$ database;

  NAME DATABASE_ROLE OPEN_MODE
  --------- ---------------- --------------------
  ORCL PHYSICS READ SHALL ONLY APPLY

  Detail of the problem is less than
  ------------------------------
  I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
  SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
  Database link created.

  But when I run a query using db link to my database of enforcement report I got this error below.

  ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
  ORA-02063: preceding the line of DATADB_LINK

  Then I see logfile named database alart Active Data Guard and get below error

  ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")

  But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.

  So it's a problem of link DB between active Data Guard and other databases?

  Check this statement that applies to your environment

  * ORA-01555 on Active Data Guard Standby Database [1273808.1 ID] *.

  also

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:8908307196113

• How can I compare prices between iPhone Upgrade Program and refinancing?

  I wonder this for years, and it's how can I see how much is a new iPhone (say if I am refinancing a 6 s 16 GB iPhone), how much will cost each month and how much an iPhone cost in case of upgrade program. So if we are on the upgrade program, can OK, I buy it in the stores of carrier? What are the benefits of refinancing? Can I exchange a phone located to midway between the refinancing period and use the program to update iPhone and will I pay less each month? And after 12 months, what I have to pay the tax and the money to upgrade to a new iPhone, or is it just continue to pay $32 per month?

  Visit their Web sites. All the details are there for you to browse and decide what suits you best. Only you can decide.

• New window creates a gap between the Favorites (top) and tabs (bottom)

  19/12/14 bug Firefox began to occur:

  • When having only 1 window open and opening tabs behaves normally.
  • However, when you open a new window of the space between the bookmarks (top) and tabs (bottom) spans all windows. Its boring.

  So far only challenge is to just close and open 1 single window, or to use the module 'Classic theme restaurateur' and switch the tabs position from the bottom to the top, but all new windows will open the gap again.

  Image below.

  Unfortunately, none of these options works, so far, use 'CTR' and turn the legs up (default) allows the opening of new windows without gaps.
  Seems to be some sort of bug recently showing on CTR.

  You will need to find a way to contact the developer to let them know.

  EDIT: It seems to be resolved, seems a new version was released and the problem disappeared. Thank you very much for the help.

• Dropbox for bookmarks or downloads of the navigation bar adds space between the navigation bar and bar bookmarks.

  When I press the button edit bookmark or download the toolbar for navigation that a line of space appears between the navigation bar and the bookmarks toolbar. This problem is corrected when I start Firefox in safe mode, but not when I boot normally and disable all addons. Please tell us how to solve this problem. Reseting Firefox and install all add ons still causes too many problems, so I hope to be able to solve this problem without reset.

  [url =http://postimg.org/image/uwr2x6x21/] [img] http://S28.postimg.org/uwr2x6x21/space.jpg line / URL

  You can also try to delete the file localstore.rdf (resets the toolbar configuration) in the case of its corrupt.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.