5.6 LR does not recognize my Nikon 70-300 1, mm and my Tamron 28-300 mm.

Similar Questions

• 6 Lightroom does not recognize my Nikon D700 in trying to use Tethered Shooting.   I have the right cable to attached tools I think. It happens with no camera detected.   Camera is on.

  6 LightRoom does not recognize my Nikon D700 DSLR.   I have connected the PC to my DSLR using Windows 10.   I entered the program 6 of Lightroom and selected "file/Tether Capture / captive Start Capture."  He then says "No Camera detected"

  I think I have the right cable attached. It is a 5 Pin mini-cable USB 2.

  The mini USB camera works, I think.  I uploaded photos from the D700 to my computer before.

  When I connect and disconnect the tie between my laptop and the D700, computer one problems

  sound of Bell saying he acknowledged a connection to the laptop device.

  What could be wrong?

  Thank you!

  Len.

  Hello

  Please upgrade to the latest version of Lightroom, and the question to tie with El Capitan will be resolved: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Professional Windows xp does not recognize my nikon coolpix s210. Is there a driver I can download?

  I improve my system to Windows xp professional. Now when I try to connect to my nikon S210 coolpix using the USB cable, windows does not recognize my camera.  Y at - it a player that can be downloaded?

  Access the site Web of Nikon and see if they are available for the CoolPix s210 drivers.
  http://www.nikonusa.com/Nikon-products/product-archive/digital-camera/26103/Coolpix-S210.html

  No firmware update is available.

  http://support.nikonusa.com/app/answers/detail/A_ID/14564

  Please contact Nikon to see if there is a driver available.

  Thank you

  Marilyn

• iTunes does not recognize my iPod or my iPhone. And nothing worked I tried. I have the latest version of everything. I uninstalled and reinstalled my iTunes. I restarted my iPod and phone and your PC severally. And I tried every single USB ports.

  Yesterday I gor the latest version of iTunes, but it does not recognize my iPhone or iPod. So I put them both to the latest iOS update. He still does not recognize my device. I upgraded Windows 10 because that's what one of the websites I visited told me to do. But it is still worse. Now my PC says that it does not recognize the USB when I plug my iPhone or iPod, but something always pops up asking what I want to do with my camera. I have uninstalled and reinstalled iTunes and even my Apple device Service. I tried practically everything that is currently on the Internet. I just don't understand. Please help me.

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  TT2

• Computer does not recognize the Olympus Stylus 820 digital camera and shows no photos

  In December 2010, I had a virus that Microsoft was able to destroy, case #866RJP and now my computer does not recognize my digital camera.  Is there a link between the virus and do not recognize a camera?  Why my computer does not recognize my camera?

  GO to the ms Update site and run custom updates, can help.

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• My laptop does not recognize that there is a hard drive and so I can't eject one who is stuck in it. What should I do?

  I inserted a disc in the drive and it does not recognize the drive and the disc, so I tried to eject, but I can't. So far nothing online seems to have helped. What should I do?

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =======================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• I transferred CS5 to a new computer using the PC transfer program. CS5 starts on the new computer, OK, but now does not recognize raw files. Should I uninstall and reinstall again?

  CS5 I transferred to a new computer using ultimate PC mover. CS5 seems to start normally, I had to insert the serial number of my original CD. However, now, the program does not recognize files CR and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer by using the original CD, and then reinstall CS5 using the CD on the new computer?

  I finally got to work. I had to load the files CR of adobe several times but it finally worked. Thanks for your help.

• 6 Lightroom does not recognize my nikon d5300.

  Other software can see the camera (I tried digicam) what I can do.  I tried the recommended troubleshooting and it does not help.  My husband has lightroom 5 on his Apple and it recognizes the camera either.  Adobe does not offer any call to support.

  I ended up going into Device Manager and deleting the drivers for the Nikon d5300.  I rebooted and reinstalled the device.  It now seems to work, even if I have to wait about 20 seconds for my computer to find the camera.

• 4.1 Lightroom does not recognize my Nikon camera and lenses under "Lens Corrections" supported?

  Sub develop Module - lens Corrections, activate the profile Corrections, Lightroom 4.1 don't auto recognize my Nikon D5000 camera and lenses even if they ARE supported.  When I manually choose Nikon in this widow, I can't get 8 of the multitude of supported lenses Nikon to display in the menu dropdown.  Of these 8 lenses, none does not match any of my lenses.  How can I fix it?  I wish I could click the checkbox 'Activate profile Corrections' and have it auto recognize my camera and lens.

  Here is my story:

  I shoot in RAW

  It is a new installation of Lightroom 4.1 on a new computer with all updates installed.

  I am running Win 7 64 bit

  I've used Lightroom 3 on another computer and it worked fine with Lightroom 3

  I'm a real ESTATE agent who uses Lightroom to change my photos, not a pro.  So, please give answers that may include a non-Pro.  I really hope that there is a simple answer to my problem.

  I find the help file first and couldn't find an answer.

  Thanks in advance for the help!

  I'm sorry I have to ask this question, but you're SURE these images are raw images?  Aim profiles are specific to the file format

• Why don't windows 8 does not recognize my Nikon DSLR?

  I have a Nikon P90, when I plug the USB I can hear the beep PCs that told me the USB work but the camera driver fails to install and the PC will not recognize the camera.

  You may need to apply an update to the firmware:

  COOLPIX P90 Firmware 1.1 - Windows - Support & downloads update

• Capture of Lightroom CC attached does not recognize the Nikon D750 &amp; D7100

  Why does my copy of LR CC detect my Nikon D750 and D7100? The Mac detects and I can shoot tethered. The LR says: camera not detected. »

  Hi Ruyooka

  What is your operating system?

  Please see Lightroom and El Capitan | Mac OS 10.11 if you use MAC OS X El captain.

  Concerning

  ~Assani

• Nero does not recognize my dvd RW hp 1270i writer, and I can't find a driver for this player. I can read but not write to it.

  This drive came installed on the dell dimension e521 system, July 2009. There the amd64 processor, running 32-bit pro sp. for some strange reason, XP tells me that it is a D in 1270. Is there something special about how the drive is connected to the PC?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you receive an error message while you try to burn the CD?

  3. are you able to burn in windows media player?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs.

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• When I plug my new Seagate Free Agent Desk GoFlex external drive, I get an error message saying that Windows does not recognize the hardware. I'm stuck and need help to install the external hard drive.

  My problem is that the software is supposed to be on the disk but I do not see the player to download. I tried to download the Seagate Manager, but it shows no available disks. Any help will be most appreciated.

  Also, I tried to install the external hard drive on a Windows Vista 64-bit computer and a Windows 7 Home Premium 64-bit.  Same result on both.

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.