5 Client vSphere Web does not start

Similar Questions

• After the upgrade from 5.5 to 6.1 VCenter Web Client vSphere page does not work?

  Dear expert;

  I need your help to solve my problem describe as below: -.

  After Upgrade VCenter from 5.5 to 6.1 the vSphere Client Web page does not work, so I need to solve

  Thank you.

  This problem is solved by using below command

  The '% VMWARE_PYTHON_BIN' list '%VMWARE_CIS_HOME%\VMware Services\lstool\scripts\lstool.py identity' - url http://localhost:7080/lookupservice/sdk - type vcenterserver > c:\psc_services.txt

  '% VMWARE_PYTHON_BIN' Unregister '%VMWARE_CIS_HOME%\VMware Services\lstool\scripts\lstool.py identity' - url http://localhost:7080/lookupservice/sdk - Service_ID id in step 4 - user "[email protected]" - password "XXXXX" - non-cocher-cert

• One migrated from my virtual machine to another host VSphere and it does not start

  I have a virtual machine that I've initially converted to Hyper-V to host VSphere. After I did it would start very well, but I got up two errors when starting.

  "An IDE controller is found but the VM does not support the option" and

  "A plate supporting the option not found."

  When I looked at the hard drive in the settings it looks like it is not supported. Is it because I badly converted to Hyper-V to VSphere using VMWare Converter?

  But now, I configure VCenter Server and tested a migration of these machines to another host and using the VSphere Client. It does not start now. I get an error message that says.

  "Device 'drive hard 1' uses a controller that is not supported." This is a general limitation of the compatibility of the virtual machine with the selected host ESXi version. »

  Remember that it is the same VSphere host it is running on initially. Any suggestion would be appreciated.

  If it works now - is that correct? n ' forget not to award points useful and/or correct

  I removed these entries;

  ide0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
  IDE1:0. Present = 'TRUE '.
  IDE1:0.clientDevice = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-raw"
  IDE1:0.startConnected = "FALSE".
  ide0:0. Redo = «»
  IDE1:0. FileName = ' / usr/lib/vmware/isoimages/windows.iso '.
  scsi0:0. DeviceType = "scsi-passthru.
  scsi0:0. FileName = ' / vmfs/devices/cdrom/mpx.vmhba1:C0:T0:L0 '.
  scsi0:0.allowGuestConnectionControl = "FALSE".

  And added to them;

  ide0:0.clientDevice = 'true '.
  ide0:0. DeviceType = "cdrom-raw"
  ide0:0.startConnected = "false".
  scsi0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
  scsi0:0. DeviceType = "scsi-disk" hard
  scsi0:0. Redo = «»

  Although there is a high probability that the other six you have to do will be similar to this, they will have to be assessed individually and modified accordingly.

  See you soon,.

  Jon

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Microsoft Worldwide Telescope client does not start

  Client Microsoft WW telescope Windows does not start. Windows has stopped working (Microsoft Worldwide Telescope)

  Windows Vista. Researched and no help

  Thanks for responding. I updated DirectX and after loading a bunch of updates, it works now. But thanks for your help!

• Infrastructure Client does not start

  We just started the virtualization and the first strange problem.

  We have 2 servers running EXSi and an AdminPC (Dell OptiPlex960 with teacher WinXP SP3) VMware Infrastructure Client is installed and running fine.

  I need the customer also installed on my phone (Samsung X 460 runs teacher WinXP SP3) BUT the client does NOT work - error message is:

  VpxClient.exe - Application error

  The application failed to initialize properly (0xc0000135). Click OK to complete...

  Installation files have been downloaded from the same EXSi server and we are not aware of major differences between the applications installed on both machines.

  Installation completed successfully on the laptop, but the client does not start...

  Thank you

  Thomas

  Have you installed the latest .net Framework?

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• vCenter VC service does not start

  vSphere 4.1 running on WIN2K8 R2 ENT 64 bit.

  The center of the vCenter Server virtual server service does not start.

  I migrated just box 32-bit physical in a 64-bit vm and the following documentation for VMware, I migrated to the database successfully last week. Everything seemed to work ok after. However, when I arrived this morning, I noticed that I can not connect, so I opened vSphere client on the host computer and consoled in. I noticed that the service wasn't working, so I tried to start it and I received the following message:

  Event ID 7024 with the following in the system log:

  "The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the file specified."

  I restarted the VM server, but neither VC service or Web services Mgmt Services were running. I started VC temporarily, but he stopped.

  I checked the system event log and found this error event:

  "The service of Server VMware VirtualCenter ended unexpectedly. It has done this 1 time.  The following corrective action will be taken in 300000 milliseconds: restart the service. »

  After digging in the application log, I seem to have the found guilty (EVENT ID 9002):

  "For the 'VIM_VCDB' database transaction log is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"

  I know this has something to do with SQL, but there is no SQL Studio Mgt installed on this box.

  How can I there to remedy?

  Thank you

  Alex

  Hello.

  Check out http://www.vladan.fr/how-to-fix-%E2%80%9Ctransaction-log-for-database-%E2%80%98vim_vcdb%E2%80%99-is-full%E2%80%9D-errors/

  Good luck!

• Firefox does not start until the wifi is active

  I'm trying to use the latest firefox (v32) on Debian/testing/64-bit by using the 64-bit version of FF... This machine is a laptop and is used only with wifi. The wifi that is usually used is a Starbucks or McDonald's who require a click on a Web page before the connection is enabled... When I start FF to be able to select this check box, it does not start. a look at the ps - xua shows firefox as a zombie/missing process... How I work around this, is to use Google Chrome to shoot to the top of the Web page, click on the box, then almost immediately the instance FF I tried to launch rises... If I clicked on the icon of the FF once more, I get more window a FF... It seems that FF needs a pipe open to internet before it will start. I prefer FF on Chrome, but if I have to use Chrome to "Kick-start" FF, I might as well delete FF and just use Chrome... Any ideas?

  UH... This problem occurs on Linux... It IS not IE (thank God)... The proxy on FF and Chrome settings are identical, namely NO proxy configured...

  I've come up with a workaround.. Switched out the Linux drive with my pretty unused Windows 7 disk.. Where this problem with Firefox doesn't occur.. I'll check back in a few months with FF on Linux and see if one of the endless "updates" has magically fixed this problem.. Thank you for the help anyway..
  

• Firefox does not start after the computer restarts

  Install Firefox, works great. Restart the computer, Firefox does not start, or finally when it tries to start the script errors occur. If I reinstall Firefox after restart of a computer, it works fine, once again when the computer is stopped at the next startup it is, will not be able to use Firefox. Firefox does not start in Firefox Safe mode, does not start in windows safe mode. Do not add now, nothing has been added, just the Firefox installer played complete the system restore on the computer, same problem. Windows 7 Pro. Remove Firefox from windows control panel, restart your computer, install firefox, will take place. shut down the computer, put on the computer, firefox does not start, or crashes. I am exploring now Web interface.

  I reinstalled Firefox, so it will run in order to perform the steps below.

  Here is the answer which took care of the problem,

  http://KB.mozillazine.org/Browser_will_not_start_up#Problematic_plugin_prevents_browser_from_starting

  "Site Web TrueSuite Log On" plugin (AuthenTec), is the question.

• Satellite Pro L850-1DW does not start correctly

  Hello

  I have a client who has a L850-1DW / PSKDHE-00E005EN laptop.

  She keeps pointing out that the computer does not start successfully from the cold.
  She argues that the question arises mainly when the battery starts but sometimes when it is plugged into the mains.
  I can see where point of newspapers that BSOD were registered at the start and that, on more than one occasion, his computer was recovered from a restore of Windows. He has also recovered factory once too.

  Although I've seen the consequences of these issues of "start-up" I have yet to experience first hand with the device.

  I noticed yesterday that the BIOS is outdated (as I had an alert Tempro).
  I upgraded from 1.6 to 6.50. Yet once, I didn't have problems.
  I can't find the release notes for the BIOS so I don't know if this is a known problem that has been fixed.
  I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.

  Any suggestion is welcome.

  Otherwise, I guess I have to connect a call with Toshiba.

  On this virtual path, it is not easy to say what the problem is here. In my opinion, you should ask your client if you can make the data backup and install original recovery image. To my laptop computer reviews must be tested with the settings without installation of additional software.

  > I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.
  Who knows? Ask your client and show how to start the laptop by pressing the button walk / stop. It must be done slowly and for only one second.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Satellite A10-131 does not start of valuation or any other disc

  I have a client who has an A10-131. I had to reload the OS, but the new DVD burner does not start the recovery CD or any other original Windows CD also. Is anyone able to solve this problem. I need to know which solution is possible with such a problem.

  Thank you.

  pHoEnIx_fIrE

  How have you tried to boot from the drive?
  Have you changed the boot order in the BIOS?

  Startup options are usually available.
  1. you can press the C key immediately after to computer mobile power to detect CD/DVD drive starts
  2. you can press F12 for the boot menu
  3. you will first change the boot order in the BIOS to ODD

  But it s interesting to know if your new ODD is compatible with the laptop

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them