5 converter does not recognize the partition LVM on Oracle Linux 6

Similar Questions

• Adobe's DNG Converter does not recognize the Raw of Lumix GX8 files.

  I use Lightroom 5 on a desktop Win 10.

  Downloaded 9.3.0 DNG Converter but it does not recognize the GX8 Raw files. How can I process Raw GX8 files?

  The DMC - GX8 was supported in 9.1.1

  Have you downloaded from the Adobe site?

  Download the latest DNG Converter 9.3: Mac | Win

• DNG Converter does not recognize the NAVE or ARW files

  Hi, I'm using CS5 and cannot open RAW files. I've already updated the plugin to 6.7 and I still can't open them, so I downloaded the DNG Converter, but it does not seem to recognize the NAVE or 2 different cameras ARW files. What's the deal here?

  In fact, leave it as what. The reason to change depends on if or not you need to convert for the widest compatibility with versions prior to leaving. for example, conversion of 6.6 allows you to open the DNG in CS5. (Curiously, 7.1 was not until CS6/CC, if I remember correctly, but maybe it's because your camera models. At least you know that setting is there in case you have problems.)

• 7.4 converter does not recognize the RAW of Nikon J3 files

  Hello

  I downloaded the Converter 7.4 to convert the RAW files from my Nikon J3, but I get "no items matched your search" when I try to select the files I want to convert.

  I tried to download Converter 8.1 as well, just to see if there are some updates that help, but always without success.

  I use the Nikon J3 with a VR 10-100mm lens.

  Does anyone have advice?

  Thanks a lot for your help.

  You can't choose individual files or groups of files in the DNG Converter.  As shown in the command prompt, you can select the folder that contains the raw files.  If you want to convert individual images, you need to drag and drop on the DNG Converter icon.  You may consider to install the DNG Converter 8.1, which is the most recent and will support most of the cameras.

• How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  I want to continue my membership with Adobe, however, not if it requires some additional software purchase.

  For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• PC does not recognize the third HD

  I would like to add a third internal HD to my PC via a SATA connector, but my PC is so far not recognize my third drive after connection.

  Data sheet:

  M7664X http://support.hp.com/us-en/document/c00771737

  MB: A8M2N-(Bios 3.10) http://support.hp.com/us-en/document/c00783678

  Win 7 Pro

  GPU and upgraded PS

  Current readers and connections;

  C: SATA HD with OS and only for programs

  D: optical drive SATA

  E: SATA HD for storage of all the

  *: Original optical drive connected with IDE cable but is no longer recognized after that I recently installed Blu Ray compatible optical drive.

  New HD 2 TB correctly connected to the power supply and cables SATA MB but when I start the PC, Windows does not recognize the new HD connected on the fourth slot SATA.

  Is there something I should do under PC Set UP to initialize the new HD that I jumped?

  Refusing to make waves is not an indicator of a life lived well. Refusing to make waves is the State that precedes the drowning. -Author Paul Coughlin

  If you are not sure of any stage, confused, DO NOT make changes.

  How to prepare a hard disk

  Start, Control Panel, administrative tools, then:

  • Click here to open the computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • In the left pane, under storage, click Disk Management.

  • OK, lets check in disk management. Your boot drive will display a Disk0. Stay away from that.

    Your 2nd hard drive will be displayed as Disk1.     Stay away from that.

    3rd (new) hard disk should appear as Disk2.      If it is this that "see you", then continue.

  • Click on a region not allocated on your "new" hard disk and then click New Simple Volume.
  • In the new Volume Simple Wizard, click Next.
  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum size by default, and then click Next.
  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click Next.
  • In the Formater Partition dialog box, do one of the following:
  • • If you don't want to format the volume right now, click on do not format this volume and then click Next.
    • To format the volume with the default settings, click Next.
  • Review your choices and then click Finish.

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• filmmaker does not recognize the MTS files

  I use Widows VIsta.
  I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file.  Can someone help me? Thank you.

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.

• EA6700 does not recognize the 32 GB usb 3.0 flash drive

  My EA6700 does not recognize the drive flash usb 3.0 32 GB (Silicon Power J10)
  tested with the two NTFS FAT32 & does not work
  WD 1 TB USB 3.0 œuvres
  PQI 8 GB Usb 2.0 works

  pls help

  I just use "BOOTICE v1.0.6 by Pauly" and in "Manage items", "Re-partitioning" changed "Disk Mode" mode "USB - FDD" mode "USB-HDD (single Partition).

  Now it works fine

• Movie Maker does not recognize the MPEG2 files that are created from my new video camera. What can I do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  ======================================
  You run Vista Movie Maker 6? Might be interesting to try
  Convert MPEG files to WMV format before importing.

  Or... it may be interesting to try to install Windows Live Movie Maker...
  which could be compatible with the MPEG2 files.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• W7 Device Manager does not recognize the Intel AMT devices

  Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

  What is the brand and model of the computer?

  Check out these links and see if they help.

  Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

  http://support.Microsoft.com/kb/976728

  Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

  If your motherboard supports AMT technology, you can download, install the drivers from this link.

  AMT: Intel® AMT Driver for Intel® motherboards

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

  Note: This download is valid for the products listed below.

  Intel® card mother DB43LD

  Intel® card mother DQ43AP

  Intel® card mother DQ45CB

  Intel® card mother DQ45EK

  If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

• Currently, I have Photoshop CS5 with Adobe Bridge. The upgrade online for Photoshop CS6 includes upgrades to the bridge? I recently bought a camera Nikpn D810. The old version of the bridge does not recognize the D810 Camera Raw format. Thanks for any hel

  Currently, I have Photoshop CS5 with Adobe Bridge. The upgrade online for Photoshop CS6 includes upgrades to the bridge? I recently bought a camera Nikpn D810. The old version of the bridge does not recognize the D810 Camera Raw format. Thanks for any help.

  New digital camera sometimes means an upgrade of the software, as in this case.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  First, the D810 is supported in camera Raw which is compatible with the CS6 and later versions 8.6.

  Options:

  1. Pay for upgrade to CS6
  2. Join the cloud to Adobe
  3. Download the free Adobe DNG converter, convert all the D810 Raw files to DNG, and then edit the DNG in CS5 helps Photoshop | Digital Negative (DNG)

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)

• LR 1.4 does not recognize the raw files of Pana LX-3

  I use LR 1.4 and I try to import my new Panasonic LX-3 raw files. LR does not recognize the file type - told me there is nothing to download. I downloaded DNG converter 5.4 with the hope that that would do the trick. LR does not communicate with the DNG Converter, or, well, I don't know what.

  Can someone tell me how to import LX-3 raw files in LR 1.4? I'd rather not spend the money to upgrade to LR 2.4

  Thank you-

  Use the raw DNG Converter to convert raw files to DNG (keep the original raw files). Then you can import the dng files in LR and they have to be posted.