5 Lightroom takes half of my boot disk space.  What can I do to reduce the which?

Similar Questions

• Original (D) disk image hard is full, what can I do to reduce the amount used. Emptying trash, Defraged etc, any ideas please

  (D) original hard disk image is full, what can I do to reduce the amount used, I 1.36 MB of 7.43 GB free space. Emptying trash, Defraged etc, any ideas please?

  You're not supposed to be access the recovery partition or copying what anyone, unless you go actually to recover the PC as long as you plant. -ignore the msg.

  In the system properties > System Protection disable protection for the D drive

  BTW have you created your recovery disks, using the process described by the manufacturer of your PC, if you you do not need to do that now!

• Can I remove the old http / / downloads that take up a lot of disk space?

  Original title: deletion of httpdownloads

  in the Add/Remove window, I can delete old http / / downloads that take up a lot of disk space?

  
  
  
  

  Hi NadeemShamsi,

  You can remove unnecessary files from your computer using disk cleanup.

  For more information, refer to this link: using disk cleanup

  Hope the helps of information.
  Please post back and we do know.

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• There is not enough disk space or memory to display or print the picture

  I am trying to print a document from Microsoft Office Word 2007, but when I open the document, "are there not enough disk space or memory to display or print the picture" error message appears forbidding me from looking at the pictures in my file. How to solve this problem?

  Hi IJustWantToBeSuccessful,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS Office and would be better suited to the Office Online community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Next 'Units of the rule' in the layout, select the good 'units of the rule' in the drop down, and then set your margins.

• Replication more disk space - what to do?

  I use vSphere replication and my destination for replicas is running out of disk space and has stopped replication. What can be done to correct the problem?

  I am using Vcenter 5.1 with device replication replication Vsphere v5.1.1.0

  1. is there a way to consolidate changes in the initial replica?

  2. What is the appropriate procedure to move a replica to a new data store without having to create a new replication? I have at least need a seed created from my source destination now complete.

  I can't find any documentation on how to handle this situation. No indication on the sizing of a data store to store replicas?

  Thank you all to help me.

  Hello

  There is no good solution at present, but it is on the roadmap for a future version of vSphere replication.

  One option is to:

  1. clone/copy the replica target records in another data store (cp/scp or vmkfstools, records are locked - you may need to temporarily stop VR server - stop /etc/init.d/hbrsrv and later /etc/init.d/hbrsrv start).

  2 consolidate in order to integrate all current instances replicates (using vmkfstools).

  3 stop the old replication, and configure replication once again, the wizard of pointing to the drives cloned to use them as starting.

  Depending on how the drives are cloned, you will need to change the cloned hard files and update the value of ddb.uuid to match the one in the source VM .vmdks / old replica .vmdks. If ddb.uuid values do not match, you will not be able to use the cloned as initial copies .vmdks.

  4. newly configured replication will be the comparison of the checksum and exchanging all waiting for updates while replication was not working.

  Kind regards

  Martin

• calculate disk space total used by databases oracle across the company

  Hello

  If we want to know the number of instances, the number of RAC databases and disk space around total used by oracle (not the size of file system),

  1. any script can be run to grid control OEM against all instances/databases?

  or

  2. we have a unix server that has the entire databases tnsnames, any script that we can run from there?

  Thank you very much!!

  This is not a difficult task.

  What OEM version you have?

  (i) connection in OEM

  (2) create a Group and add all of the databases in this group

  3) go to the "Reports" section in OEM and GO to 'Oracle database space use (group)'

  4) click on this link

  (5) select the group that you created in the previous step and see the report.

  (6) it will show you the TOTAL space, space allocated and free space of all databases in the group together.

• BOOT DISK SPACE SEEMS TO DISAPPEAR

  I m using a MacBook Air (13 inch, mid 2011) with 1.7 GHz Intel Core i5 using OS X El Captain having 4 GB 1333 MHz DDR3.

  Recently my BOOT disk ran out of space and subsequently, that I released some 22 GB of space. Then after a week of missing free space. I haven't had a major work in the meantime.

  However, I found another 20 GB of data to remove. 2 days later, this new disappeared.

  What is going on?

  Empty you your trash?

• Just my computer was restored now when I try to start it, it says that I need but in the disk boot. I don't have a boot disk. What should I do?

  I got a virus and I had fixed my computer, but now whenever I try to start my computer it tells me that there is no device boot-able and for me to insert a boot disk, then press a button on any. Well, I looked through all the manuals and CD that came with the computer and not for the life of me, I can find a boot disk. It's an old unit, I bought it in 2005 and I've been using Windows XP. Then what should I do? Is there anyway to get a boot disk? Can I just buy a new form of program store like windows vista or windows 7? Please keep in mind and don't forget when you give inform me that I am unable to do anything with the tower. No internet access, no desktop, nothing, so that the download is not an option. It just starts and then tells me to put in a boot disk. So what I do/how can I remedy this? Thanks for the help!

  Hi Becca_459,

   

  1. who is the manufacturer of your computer?

  2. What is the exact error you get when you start your computer?

  I suggest you to check the computer's BIOS settings to make sure that BIOS lists and recognizes the hard disk. See the computer documentation or contact the manufacturer to find out how to check the BIOS settings.

  After you verify that the computer's BIOS detects the hard disk, restart the computer, and then test to determine if the problem is resolved.

  If the problem is not resolved, or if the computer's BIOS cannot detect the hard disk, you may have problems with your hardware. Contact the manufacturer to find out how to solve this problem

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  If it does not, you will need to contact the manufacture of equipment.

• 3000N200 R & R backup takes hours and using the large amount of disk space. Can anyone help?

  The weekly backup of Rescue and Recovery has suddenly started to take hours when I haven't changed anything and uses a large amount of hard disk space. I tried to remove some previous backups and it and it seemed to work OK and then all of a sudden decides to do the same thing. I tried a previous restore point and it helped for a while and now just made a backup taking 4 hours and 20 GB of hard drive space. It is a fault and has nothing to do?

  
  

• I get message "not enough space on drive" when I check Add/Remove items, I noticed that the Windows XP security updates takes a huge amount of space? What can I do to reduce or fix it? __

  Free space on drive C - Windows XP Security takes a large amount of space.

  Beachaven,

  Welcome to the Microsoft Answers Community!

  How much space you show the updates of security take?

  It is recommended to leave all the updates security installed and continue to keep your computer up-to-date with Windows Update. Remove these updates will make your computer vulnerable to malicious software. If you need to erase the disk space, I recommend to uninstall old programs that are no longer in use. You can also check the disk cleanup tool to see if you can free up of any space there.

  ·         Click Start

  ·         Click on all programs

  ·         Click on Accessories

  ·         Click on System Tools

  ·         Click Disk Cleanup

  ·         Check the boxes of files to remove

  ·         Click OK

  ·         Click on delete files

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Please help - I need to add more hard disk space (I know, I screwed up in the beginning!)

  I use VMWare fusion (1.1.3) on a mac intel, and I'm running a windows xp virtual machine. I had no plan to install all programs on it, just wanted to test Web sites, but now I need to intsaller office and do not have enough disk space. Is it true that you have to use third party software to do this? Can someone please? Thank you!

  Take a look at: resizing of the ramdisks with step by step Instructions

  Also because your using the Fusion 1, you can also watch: resize virtual disk for Windows guests with step by step Instructions

• Disk space MacAir swallowed in 10 minutes after the start.

  MacAir fast - disappearing of disk space!

  My problem:

  When I turn on my OS 10.6.8 MacAir is about 8Gb available, but in a few minutes, that reduces to zero. Whenever I restart the same thing happen again..... after that 10 minutes maximum available space is zero!

  The cause?

  I strongly suspect a simple PDF bit that someone sent me two days; I did not notice that he weighed 6.2 Mb, instead of a few KB.  He came to me a business, I worked with years, so logically nothing intentional here. I opened it and worked as usual.

  The solution?

  I been using Macs since 1984 and have a vague idea, I solved this kind of problem once before. With Onyx? But today I really don't know.

  Help! I need help :-))

  Brian.

  Download the Internet OmniDiskSweeper and Grand Perspective (both free) and open them. They will show all your files and respective sizes. Transfer to an external HARD disk or remove files, that you no longer want on your MBP.

  Don't forget to empty the trash. Then only the space is allocated for the new data.

  If you can't always solve this problem, run OmniDiskSweeper as root.  See the instructions at the bottom of this link:

  et-disk-inventory-shows-only-190gb-used-vs-48 http://Apple.StackExchange.com/questions/92180/Running-Out-of-Hard-Drive-Space-y

  Ciao.