500 error after installation on Windows 8.1 CF11

Similar Questions

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• 500 error after installing CF11 on Coldfusion 32-bit Windows 8.1

  We have difficulties to get the 32-bit coldfusion11 to work on a 64-bit windows 8.1 computer.

  I followed all the steps in the thread 500 error after installing on Windows 8.1 CF11

  but we still have a problem when we run the admin page 'http://localhost/CFIDE/administrator/index.cfm'.

  It returns "HTTP error 500.0 - Internal Server Error" and we were unable to find a solution.

  All managers appear to be installed correctly and we put the application pool by default "true" to enable 32-bit applications... (PS tried both true and false no difference)

  and security settings are all set to "full control".

  Any help on this is greatly appreciated

  

  

  

  Cool. Which confirms, ColdFusion works.

  Test B:

  1. Can you create a test site in IIS and place a test html and a test cfm page.
  2. Now, go to the html page, and it must be rendered in the browser.
  3. Now, create a connector on the site and access to test html code and test page cfm
  4. If you get the 500 error, then make sure the number of bits of CF and IIS.
  5. Otherwise, if you get 500.19 or any other error, please ensure that you have the permissions on \ColdFusion11\config\wsconfig\

  Let me know the results.

  Kind regards

  Anit Kumar

• HP 15-r103ne: error 0xc0000221 installation of Windows 7 64 bit on HP 15-r103ne

  I got an error 0xc0000221 installation of Windows 7 64 bit on HP 15-r103ne.  I changed the HARD because its gone bad original disc and cannot be formatted. I tried to install windows 7 64 bit several times but I always had an error after the first reboot, and never fill the installion. Any help will be greatly appreciated. Thank you!

  @DidokB,

  Thanks for posting back.  The other drives must have some sort of issue if they all failed to install.  If you have to install on the last of them, then is not the operating system recovery or the laptop.

  With some drives, there could be questions that are not connected to bad sectors.  It may be something with reading / writing system.

  Thanks again for the post and have a great day.

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• What do I need to uninstall Windows 7 after installation of Windows 10?

  What do I need to uninstall Windows 7 after installation of Windows 10?

  You upgrade from Windows 7 to Windows 10?  If so, how it remains on the disk?

  If your question is about whether the operating system that is used to qualify for upgrade can be used even if it is still eligible for the upgrade, the answer is no it is essential will be blocked until the upgrade is removed during the reinstallation of the old operating system.  Then it may take wake-up phone to retrieve the old operating system license.  Also is it better to keep the old operating system using a Windows 7 System Image backup which can recover the old BONES in 20 minutes and preserves the activation.

  Let us know if that answers your question.

• Can I install Parallels after installation of Windows using Boot Camp?

  Windows on Mac

  Can I install Parallels after installation of Windows using Boot Camp?

  You can install Parallels, but you will not be able to transfer your license existing if its already active in Boot Camp. You first need to remove the Boot Camp, then you can transfer it to Parallels. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Error after installation of Service Pack 1 for Windows 7

  I use Windows 7 Ultimate and have just upgraded to win 7 SP1, but after installation, this error "AntiVir Scanner from the command line for Windows has stopped working" message whenever I open an application. These applications don't crash, but the forthcoming disorder with them is really annoying, and I don't know how to solve this problem, because I do not use AntiVirus software at the present time. So please help me. Thanks in advance much.

  [IMG] http://i1226.photobucket.com/albums/ee410/bug_bunny145/Untitled_zps82267e02.jpg [IMG]

  I thank very you much. At that time I used too many software use clean boot as a method to check if a program has been the source of this error, so I decided to reinstall Windows 7. I really appreciate your support. ^^

• 500 error after installing the CF on Windows Server 2008 IIS7 9.0.2

  After installing the CF 9.0.2 on Windows Server 2008 with IIS7, I get an error 500 return of all my websites.  I made sure to change the permissions in the C:\ColdFusion9 folder to full control for psaadm, psacln.  I'm sure that CGI, ISAPI extensions and ISAPI filters are installed.  I rebooted.  I can access the administration of CF on the server, but all of my websites are generating 500 errors on remote browsers.  The uninstall does not solve the problem.  Help, please.  What can I do?

  Problem solved!  It was related to incompatibilities of 32-bit/64-bit with Plesk.  There are two steps to solve this problem:

  1 snap the Internet Information services manager, access the properties of the advanced application pool and enable 32-Bit Applications 'false' for plesk (default) (2.0) (pool) value.

  2. in Plesk, disable the Web statistics (accessible via password protected directory ' / plesk-stat/webstat /')

  Note that you will not be able to use the functionality of Plesk protected directory until Plesk solves this problem.

  Complete in writing to the top of the solution by AndorA in Plesk forums can be found at: http://forum.parallels.com/showthread.php?t=262903

  Andor thanks!

• 500 error after installing the CF 11 update 2

  Hola,

  I installed the CF 11 update 2 today and now I see nothing else that a 500 error when trying to access to CF administrator or application, we're * trying * host.  In CF newspapers, I keep seeing error messages following each time CF 11 Application Server service is started:

  "coldfusion.server.ServiceFactory$ ServiceNotAvailableException: the monitoring service is not available."

  and

  "Failed to initialize the monitoring service: coldfusion.server.ServiceException: unknown tag: Arg".

  I don't know if it comes to the reason why I get the 500 error, however.  I tried to rebuild the web connector, reboot the operating system and services, etc., nothing is.  I also tried to install a redistributable VSC ++ 2012 I've seen suggested somewhere on these forums, and that did not help either.

  Any help would be greatly appreciated.

  Hi Doug,.

  As Admin is not available, first remove the update manually. Here are the steps. I provide you instruction, if you have installed CF11 in C drive.

  1. launch the as command prompt run as admin.

  2. go to this site C:\ColdFusion11\jre\bin and then type the command "java-jar C:\ColdFusion11\cfusion\hf-updates\hf-11-00002\uninstall\uninstaller.jar". If you get a console to uninstall, then follow the instructions on the screen, if it is not then it uninstalls it without prompting.

  3. after uninstall, check if the service has looked at properly and if you had created the connector after update 2, then remove this connector and recreate the connector (make sure you run the wsconfig tool as run as Admin, location C:\ColdFusion11\cfusion\runtime\bin).

  Once all these steps check if the Admin works or not. If it works, then go to this place in the C:\ColdFusion11\cfusion\hf-updates Windows Explorer, and then delete the hf-11-00002 folder and file hf-11 - 00002.properties.

  Installation instructions:

  1. go to the C:\ColdFusion11\cfusion\hf-updates location, find you hotfix_002.jar, copy the jar file and paste it into the C:\ColdFusion11\jre\bin directory.

  2. launch the command prompt run as administrator, then navigate to this location C:\ColdFusion11\jre\bin and then type the command 'java-jar hotfix_002.jar' and follow the instructions on the screen.

  Once the update is successfully installed, and then create the connector with above steps (3 steps). Let me know in case of any question,

  Thank you

  Priyank

• Computer cell G6, don't wake up not the mode after installation of windows 8

  OK here is the problem, computer works very well with Windows 7 (64 bit), but after the installation of Windows 8 (64-bit) system incounters errors.  To put the system to sleep, closing the cover or on its own, during the process of awakening Windows 8 says it has incountered a mistake and must restart and it does on its own.  He tries to wake up but freezes and restarts.  There is no error code given just that windows has incounterd an error and must restart with a face to frown.  I contacted microsoft support and after many hours on the phone, it seems that the bios does not support this feature with Windows 8.  BIOS have been updated to the newest bios listed for the upgrade of Windows 8 on the HP website.  All the driver have also been updated with those listed for Windows 8 upgrade to the HP Web site.

  HP Pavilian G6-1b22ca

  Windows 7 Edition Family Premium in Windows 8 pro

  BIOS F.48

  Does anyone know of a work around or a solution to this problem?

  You are the very welcome.

  I am pleased to read that you got your laptop in an average point round.

  As long as it works well, then it's essential.

  Enjoy!

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• Fatal error during installation of Windows Live Writer

  A few days ago MSN prompted me to update my MSN to the latest version. I did and after the update, I noticed that I could not install Live Writer. I tried many times and I'm still stuck.

  I received an error message stating:

  "Fatal error during installation. .

  Please close all other open programs, and then try again. It looks like a another program prevents the installer to work. HR:0 x 80070643 "

  Help, please. Thank you.

  Hello twmagee,

  Since you have problems with Windows Live Writer, it is best to post in the forums of Windows Live Writer.
  Click here for a link to their forum.

  They have experts and available solutions in their forums.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WiFi doesn't work don't not on vostro 3460 after installation of windows 8

  HII,

  I have vostro 3460, after installing wireless window 8 works do not, I downloaded the driver wireless dell site, but its not to proceed with the installation

  Please help me

  OK, I found a solution

  -Download the 1 x 1 Dell Dell Wireless WLAN 802.11b/g/n (2.4 GHz), the Bluetooth v4.0 + HS driver (link: Network_Broadcom_W7_A01_Setup-WTD28_ZPE)

  -Run the file. It will extract to c:\dell\drivers\WTD28. Then an error/warning occurs and that execution is aborted.

  -Open the Windows Device Manager. Find the missing element of WLAN with the yellow exclamation point (here name like 'Network controller')

  -Update the driver manually and use c:\dell\drivers\WTD28 as the path of the driver. It will automatically install and start working.

  Hope it helps someone

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/