Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

Similar Questions

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• The computer restarted unexpectedly or encountered an unexpected error. Windows cannot continue.

  My netbook is out of warranty, it won't start.  I bought what I believe with installed and later put vista upgraded to Windows 7.  He worked for long time but now it goes into a loop to tell me ' the computer restarted unexpectedly or encountered an unexpected error. "  Windows cannot continue.  To install Windows click ok to restart the computer ang, then run the Setup again.  I am not install but it keeps on telling me this.

  Original title: Aspire one Windows 7

  Hello

  You can try the methods on this link: https://support.microsoft.com/en-us/kb/2622803. Hope you still have the back upward with you.

  Keep us on the loop, so once this aid.

  Kind regards

  Angelo bar

• The computer restarted unexpectedly or encountered and unexpected error.

  OK I just got a new computer and while it was installing windows 7 my power went out, and then when I rebooted my computer, I got the message "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I restart the computer only to get the same message, it is a new computer, so I guess he has windows on it because she did not come with a disc, but there is a way tto restart installation I don't know how. Please someone? Just got this computer as a gift for Christmas and I can't even use it :(

  As this is a new computer, it is under warranty.
  Contact the manufacturer.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• «.. . restarted quit unexpectedly or encountered an unexpected error. Windows Setup cannot continue... »

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. »
  
  I have this error message and called technical support from microsoft, we have tried to reinstall Vista again once I had tried three times with the same error message. It would freeze to "complete installation." even let him all night to see if he needed more time to complete on its own, but nothing helps...

  the technician told me I have a hardware problem, but when I installed XP on it everything works correctly.

  It's a new pc and a clean install of Home premium. I re-post this question since yesterday

  Hi evan9074,

  So was the question then? You can run the Windows Vista Upgrade Advisor to see if there are compatibility issues that you have with hardware or software that would prevent an upgrade to Windows Vista.

  I hope this helps.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P300 - 18 M - Windows Setup cannot continue

  Hi, my first post here, hoping for any help.

  I recently bought a Satellite P300 - 18 M, from an independent retailer with no return policy. good on the PC is a brand new, sealed, etc and I get the Toshiba standard warranty.
  When I do the initial installation I received a message all in settng upward of Windows Vista Home "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click on 'OK' to restart the computer announced then rstart installation. »
  I tried a few times more full-time catering and the third HARD drive it installed, but...
  either he starts, I get to the password screen then all invent locks, the mouse pointer freezes then the screen becomes full of horizontal lines.

  or

  I've had a few times in windows for a few minutes (2-5 minutes) then the mouse pointer freezes, 3 seconds later the entire screen is full of horizontal lines, everything locked can only turn off the coast.
  Toshiba software error, so no warranty claim and advised that I buy the DVD (£29.90) that I ordered it, on a delivery of 14 days of recovery.

  Any other help or suggestions much appreciated as im not confident of this DVD, being a brand new sealed unit, why corript of Vista in the first place.

  Thanks in advance

  Andy

  Hello

  In my view, that the P300 is equipped with the ability to drive HARD recovery. This means that you could restore the operating system of the image that is stored on the HARD drive.
  To do this, you will need to power the laptop and must press the F8 key.

  A start menu should appear, then you should choose the first option called fix my computer.
  Then, you must choose the option called Toshiba HDD recover or something like that. It should be the last option.
  This procedure helps you reinstall Vista again.
  This facility could be that you can burn the own recovery disk using the preinstalled software called Toshiba Recovery Disk Creator.

  But if the recovery of HARD drive does not work you will need to use your orderly recovery DVDs and have to restore it again.
  If the laptop will not properly work after using Recovery then DVDs I recommend to contact the ASP again and to explain the whole story.

  Good luck

• "Windows Setup cannot continue because a required driver could not be installed" while improving to 64-bit

  I'm trying to install windows 7 64 on a 32-bit with the custom installation option. All is well until that right at the end of the installation it gives me this error "Windows Setup cannot continue because a required driver could not be installed. I tried this several times but the same results. I used the windows Upgrade Advisor to see if my computer is compatible and it is no problem.

  Error image: http://imgur.com/lOVj6eX

  Restore the previous installation of Windows and do the following:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• the computer restarted unexpectedly or encountered an unexpected error

  How to fix computer restarted unexpectedly or encountered an unexpected error.

  Hello

  Check using these methods and the next message will be placed on general methods for help.

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  You can use BlueScreenView to stick the BSOD info in a message here.

  NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
  Paste the lines in a message here. Make sure and check the file name section. Also check the time
  in MyEventViewer for more information as possible.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Driver EPSON Scan Setup installs - "error produced during installation to re start the computer, and then try again.

  New Epson Scanner GT - S50 Epson scan, set up driver will not install. keeps giving me "is an error occurred when installing re start the computer, and then try again" works fine on another pc with windows 7, but not from Dell. Tried to download from the website and cd. all other software is loading fine. Epson technical support cannot fix. Help!

  I finally had my Epson GT - S50 working. I have a contract with support iYogi.They tech were recommended by Dell.  It took them more than 12 hours to solve this problem. They had to do a full factory reset. I have had all my drives. The alleged problem with mine was HP. I have a hp all-in-one. It damaged my windows files. On re install, I had to install Epson scan first, this hp. I would not buy an epson again. The product works well now but still double flow a lot and is very picky. When it works well, it really accelerates my work verse scan with the Hp all-in-one. I'm really happy that I have a scanner, but wouldn't recommend an Epson.  I highly recommend I have Yogi tech support. They are worth every penny.

• Is it possible possible to recover a file that was not recorded and lost the computer restarted unexpectedly?

  My sister has been grabbing a paper and had saved only the first paragraph.  It almost made with it, restart the computer.  It is a Microsoft Word file.  Could possibly exist somewhere?

  Hi LauraGardiner,

  See the following article:

  http://support.Microsoft.com/kb/316951

  I hope this helps!

• Error code: the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed etc etc, click ok.

  I bought a new computer and I get this error message. I can't speak to the seller until Monday and I have no disc to re - start. Any ideas?

  If you continue to try to get going, you can void the warranty.

  I suggest that you, you have to do anyway, wait until Monday and contact the seller or manufacturer of the desktop computer.

  See you soon.

• keep windows closed, unable to backup or recovery. message: the computer restarted unexpectedly or encountered an unexpected reeor. Windows Setup cannot continue. to install windows,...

  my HP vista sys cannot repair or recovery. I tried to reformat the harddriver still does not. Please advice.

  Thank you

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/