506th PIX, PPTP and Windows 98

Similar Questions

• 506th PIX - PPTP

  Hello

  quick question regarding the 506e... .or all PIX firewall.

  Can PPTP sessions end on these firewalls, just as do the IP Sec sessions?

  Or they should end on some kind of server, and then open the ports on the firewall to let them pass

  Thank you

  Answer is YES!

  and here's the document you need you'll get:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

  Let me know if this helps and plese note all messages.

  Thank you

  Jay

• Intercommunication 506th PIX VPN to VPN windows server

  Most of he says title.

  I got a 831, and I only needed to port before the pptp tcp port 1723 to my Windows 2003 VPN server.

  Got 506th pix until 2 days ago and I cannot find a way to pass traffic. Obviously tcp 1723 is mapped statically. And I checked this command for accuracy.

  Configuration mode, enter the following command:

  fixup protocol pptp 1723

• 506TH PIX

  I have a 506th pix that I couldn't connect this morning. I had a user restart it for me while I did a ping t on this subject, the ping of the ip address of the element has disappeared, and the ip address of the proxy server now rises. What would cause this

  pings from the hosts or routers to the PIX firewall interfaces fail, check the debugging messages, which must be displayed on the console. Ping successful debugging messages appear as in this example.

  ICMP echo reply (len 32 id seq 1 256) 209.165.201.1 > 209.165.201.2

  Application of echo ICMP (len 32 id 1 seq 512) 209.165.201.2 > 209.165.201.1

  Statements of the request and the answer should appear, which shows that the PIX Firewall and the host responded. If none of these messages appeared while ping interfaces, then there is a routing problem between the host or router and the PIX firewall that caused ping (ICMP) packets to never get to the PIX firewall.

• My 506th Pix configuration

  How can I set up the following scenario. My Pix is separate internal and external network. For outgoing, I will not allow that the associated HTTP traffic. There will be no incoming traffic. For simplicity, I use ver3 PDM to configure my 506th Pix. Should be easy to set up, I thought.

  On my access rules, I allowed http and https on the inside and outside interfaces nameserver. Translation rules, I have set up NAT using a real IP on the external interface range. I have not used just in case PAT H323.

  However, the configuration above does not work. I can't any http my internal network traffic. What Miss me?

  Thanks for your help,

  FTM

  It would seem that you define the rules that indicate the source AND destination must be the same:

  inside_access_in list of access permit udp any eq field any eq field

  inside_access_in list access permit udp any eq ntp ntp any eq

  inside_access_in list access permit udp any eq name server any eq nameserver

  inside_access_in tcp allowed access list any domain eq any eq field

  inside_access_in tcp allowed access list all eq www all eq www

  inside_access_in list of permitted tcp access any https eq all https eq

  You need change that, because the source is probably going to be 1024 or greater. Try something like this:

  inside_access_in list of access permit udp any any eq field

  inside_access_in list of access permit udp any any eq ntp

  inside_access_in list access permit udp any any eq name server

  inside_access_in list access permit tcp any any eq field

  inside_access_in list access permit tcp any any eq www

  inside_access_in tcp allowed access list everything all https eq

  inside_access_in access to the interface inside group

  Having said that allow any source ip/source port access to any IP destination as long as it is for www, dns, ssl, etc...

  Your acl_web access list is not used, because it is not assigned to an interface. Remember that each interface can have only one acl.

  Also, you said that you do not PAT...

  Global (outside) 1 xxx.xxx.YYY.54 - xxx.xxx.YYY.55 netmask 255.255.255.0

  Global 1 xxx.xxx.YYY.53 (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  This tells the firewall to use the range xxx.xxx.YYY.54 - xxx.xxx.YYY.55 for the assignment of an address, but when he runs, start PAT'ng with xxx.xxx.YYY.53...

  hope this helps

• Telnet Session 506th PIX

  I have a problem with my 506th Pix: I can not connect by telnet session. Y at - it an option to reactivate PDM?

  Thks

  Yes, there is a way to access Telnet via - PDM

  Cofniguration-> system-> Administration properties-> Telnet

  Here you can add the host IPs you can telnet and specify the interface where these customers.

  Note: You cannot telnet to the outside interface security PIX firewall / low level.

  Kind regards

  Maryse.

• Java problem when you access 506th PIX

  I get an error message when I try to access my 506th PIX from in the firewall using IE. After the first password, I get the error message "exception: java.security.AccessControlException: access denied (java.utilProperty Permission java.versionread) at the bottom of the page IE.» Any ideas?

  Hi Burns I had the same problem, you need to do is to go to www.java.com and download the java applet and try and access the PIX will work without problem

• We can establish a common partition for Mac OS and Windows Boot Camp

  I'm new to Mac, so please excuse my ignorance.

  I have a MacBookPro 11 mid-2015 with 512 GB SSD and 16 GB of RAM.

  I have Mac OS X El Capitan and that you have installed 10 Windows using the Boot Camp utility on a 150 GB partition. I wanted a common partition on exFAT which could serve as a repository for my data either of the OS. My intention - 150 GB for Mac OS - 200 GB of data - 150 GB for Windows 10. How can this be achieved?

  Earlier, after the Boot Camp, I reduced the Mac OS to 350 GB partition to 150 GB and released 200 GB. Formatting this turned me expensive because it stopped my Windows to start. Repair it was a waste of time and effort. I draw the hard Windows on a Mac is sensitive to changes in the partition.

  In addition, is using Virtual Box better than Boot Camp? I don't have as much virtualized environments.

  Please advice.

  You can connect an external drive of ExFat formatted. The OSX and Windows can read/write on a disk formatted ExFat.

  A virtual machine has its advantages, as does a Boot Camp facility. A virtual machine allows the simultaneous OS, any necessary initialization to change operating systems. Data can be shared between operating systems more easily. Computer such as memory resources are shared in a VM for applications environment to run slower.

  Installation of Boot Camp allows Windows to run in native mode by using all of the system resources, so apps will go faster. But to change operating systems, a reboot is required. It is more difficult to share data.

• synchronization between the iphone and windows 7

  Can I synchronize excel and word between iphone and windows 7?  How?  CAN I get excel and word or compatible programs (aps) on iphone?  Also - I have an old version of MS Outlook (2002, 10.6 V, SP3) I want to be able to sync with the calendar on the iphone.  What can I and how?

  Also - I do not trust "the cloud."  How can I synchronize and transfer stuff between the iphone and my computer (win 7) without putting them on the cloud?

  Don't have an iphone yet, this will be my first smart phone.  Being able to use the above programs and stay out of the cloud are my priorities.

  Thank you

  Word and Excel:

  https://iTunes.Apple.com/us/app/Microsoft-Excel/id586683407?Mt=8

  https://iTunes.Apple.com/us/app/Microsoft-Word/id586447913?Mt=8

  Yes, you can sync if you store your documents in the cloud, but you do not trust so the answer is, you cannot them synchronize the.

  lar136 wrote:

  Don't have an iphone yet, this will be my first smart phone.  Be able to use the above programs and stay out of the cloud is my priorities.

  Don't get an iPhone. I think the Android device is a better solution for you.

• Hanging of Thunderbird 38, gel and does not question. 17 accounts pop (Win 8.1, MalwareBytes and Windows Defender)

  Since the update of Thunderbird to 38.* I had nothing but problems with Thunderbird wedging (spinning wheel waiting), a "Mozilla Thunderbird (not answer) ' in the header bar, whiting of window application out and possibly TB box in hell - a small box to appear asking if I want to - close the program, expected so he can resolve itself , or check the internet, then close. I now give the floor it the box to hell (B2H - call it all you want, but I'm cursed every time he pop up!)

  I did everything proposed here and nothing suits. I have used Thunderbird for years with all the same files and Add ons WITHOUT problem. On the first day of the 38 update everything has changed. When Mozilla realizes that it is in the upgrade and find the problem!

  Here is what I tried with nothing working...
  1. I don't have AVG, the only malware bytes and windows defender
  2. it still happens in SafeMode with no active add-on.
  3. I stopped saving function which slows down the frequency of the sinking, but did not eliminate the problem.
  4. I have deleted hundreds of older emails, thinking it was that but who have done nothing.
  5. I changed some accounts of POP at the thought of iMAP that was the problem but nothing has changed.
  6. I made several attempts to patch both Mozilla support and outdoors on the net. Nothing works. Looking at all the people who have the same problems, I have to say that the problem is handling of file. I noticed that as the issue with others who have multi files and emails. The answer is not to reduce these volumes but to understand why thunderbird managed their fine before and what has changed to make the program hang now? Who should be on your end, taken responsibility. Keep us faithful and solve the problem...

  Here are my tips...

  A. I have several files and thousands of e-mails longer and have manged fines, as matter of fact, Thunderbird has been great. Then like a good stooge I approved the moz and did my upgrade to 38. Never had a problem before the upgrade. After the upgrade, everything went to *.

  B. the 38 version upgrade was a big change. When I look in the folder that has been labeled the envoys or Inbox folder (where all emails from each account is collected), all the emails listed would disappear when I moved my mouse over them! Emails disappearing! They were there in records specific e-mail below but not but in the case of head as if it were just a day earlier and with the upgrade. I thought that as an addition on the question and waited for the difficulty that happened not so long ago. Again, which could be a problem of record add-on.

  C. the upgrade to 38 were other issues, but if the madness going no problem was not bad enough, the problem seems to be growing with each ' update or bugfix that followed. Don't hold me to it but I think it was in 38.1.2 or 8 (I think that's it. I wasn't paying attention, but if I had known that I would have to tell it, I will!) That's when hanging interminably long. When the program closed at least I got a project saved, then I read on line that the problem was the registration of open messages, I turned the auto reduction. He did change the frequency of the hanging (white screen pause) and timing (where the B2H appears), but he was always there and always!

  D. I had hoped with 38.2 there will be improvements. Nothing has changed. I didn't know that 38.3 would make this change/fix, but it's not. If I write all this, so you have what I know as a loyal user since 2007.

  E. here is what you need to complete the picture. I'm on a PC running 8.1. on an Intel i7-4770, with 32 GB of ram, now you tell me when you will issue the update to fix the problem! Once again, Mozilla, I suggest you start by looking at how TB 38 manages several emails, files and archives. Not all of us have only one e-mail account. Most of us have been really happy with TB before 38. If you can't find the question, can you show us how to get back to a version prior to 38?

  Thanks for listening and hope that helps!
  @v @.

  
  

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• Browser wants to open 150 tabs and windows at startup...

  In the process of cleaning up my office, I have switched my keyboard. I got the browser window open to ESPN3 in a replay of College football. My keyboard is a keyboard shortcut to open new tabs. Unbeknownst to me at the time, the shortcut key declined over 150 times, opening a new tab for each. In addition, each tab to open a new window pop up game. I opened the Task Manager and stop the process. When opening Firefox again, it automatically opens all tabs and windows again before I can do anything. So... after the termination of the process down again once I restarted the computer. And now, the same thing happens early upward. so... Shut the computer down. Same thing. so... I uninstalled Firefox and reinstalled. Same thing again. I am at a loss. Please advise!

  You can check for problems with the sessionstore.js file in the Firefox profile folder that stores the session data.
  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks if possible).

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• 9.3.3 iOS and Windows XP, iTunes error 80090326

  9.3.3 iOS and Windows XP, iTunes error 80090326

  Run the latest version of iTunes 32bits version 12.1.3.6

  Windows XP SP3

  iPhone 4 running iOS 7.1.2 can connect to iTunes without problem

  iPhone 4 running iOS 9.3.3 s cannot connect to iTunes: error 0 x 80090326

  Have tried to reinstall iTunes, QuickTime, without success to 'fix '.

  With the help of Microsoft KB 968730, tried to add support for SHA-256 encryption by applying the XP 375554 fix, without success.

  Looks like the XP upgrade to > = Windows 7 is the only solution that works.

  Someone at - it solutions for connect an iPhone running iOS 9.3.3 to iTunes on Windows XP?

  Important information, I forgot to mention:

  The iPhone 4S running iOS 9.3.3 was completely wiped out and showed the "Welcome" screen

  I restored from backup to iCloud live and from that moment, I could connect the phone using iTunes

  It is therefore some kind of problem with a blank iPhone, not yet implemented at all.

• How can I delete the history, except the tabs and windows open?

  Hi, I don't find a way to remove all my firefox history, except the tabs and windows open.
  I couldn't find any solution on the Web. I have tried almost all the settings in the privacy settings, nothing works. any ideas how to do that, or maybe suggestions for Add ons?

  As long as you clear the history manually and not through 'Clear history of Firefox closing' then you must keep open tabs and windows.

  Firefox creates a sessionstore.js file in the Firefox profile folder?

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.

  • http://KB.mozillazine.org/Session_Restore
  • https://support.Mozilla.org/KB/restore-previous-session

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser