Intercommunication 506th PIX VPN to VPN windows server

Similar Questions

• Configuration VPN windows server 2012 essencial

  What policy I need to add in the game until I will configure the VPN in windows server 2012 essential? because when I install the remote access roles I received a message when done that mention me politics. later I activate access and remote access and I can't access the internet, I disable access and remote access to I can connect to internet from my server.

  There is no forums for Windows Server community.  Windows Server forums are on the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

• 3.5.1 to 506th Pix VPN Client using IPsec over TCP

  Is it possible to do when there is a device in the path of the VPN tunnel that will make the static NAT?

  The reason is that the external interface of the Pix will have a private address, and it is the endpoint of the tunnel. The performance of NAT device has a public address, who thinks that the VPN client is the end of the tunnel, the static NAT will result the incoming packets on port UDP 500 for a destination of the Pix.

  Thank you.

  The Pix can not do TCP encapsulation. He can do UDP encapsulation.

  You can create IPSec tunnels to the external of the Pix even if address he addresses NATted provided that it is NOT of PAT and NAT.

• 506th PIX VPN CAAN connect, but no LAN

  Heelo, we have a 506E with 6.3 (3). We want to use Cisco VPN clinet to connect and can do, but cannot ping on the local network or connect to servers... Need help wih configurations because we are novice maybe... Can someone look through the attached config. and see if we have forgotten something... Thank you

  Change your pool outside 192.168.2.0/24.

  IP local pool vpnpool 192.168.x.60 - 192.168.x.63

  Then add an acl of exemption nat for this network.

  access-list sheep permit ip 192.168.2.0 255.255.255.0 255.255.255.0 192.168.x.0

  NAT (inside) 0 access-list sheep

  Then, also change your acl of tunnel from split to reflect the new pool

  permit ip 192.168.2.0 access list SplitTunnel 255.255.255.0 255.255.255.0 192.168.x.0

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• Double VPN? SonicWall & Windows Server?

  We were using Sonicwall Global VPN and easy of use and installation, we want to be able to use the standard Windows VPN.  Can be used or the firewall must be configured for one or the other.  I have configure the NAT of the PPTP service between public sector and our internal Windows Server 2012 but I get error 800 on the Windows VPN and politics journal watch SonicWall VPN IKEv2 not found.

  This Forum is made for the SRA/SMA devices and not firewalls.

  Please report these question in the forum "network security".

  But to answer the question, yes you can do both because they use different ports/protocols.

• After moving to Windows server 2012 VPN connection error

  Hello world!

  Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.

  I started from scratch by creating a new domain, user, accounts etc.

  The new server is using the same IP address as the old server.

  Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.

  When I try to connect to my Windows 7 laptop, I get this error:

  "Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."

  Any help with this is appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful.

• How can I configure two ethernet ports to connect to a VPN with Windows Server 2008?

  Something I can put in place, but im stuck with an error that I get is that I need two ethernet ports to configure vpn but why and how do I make it work I like

  original title: vpn windows Server2008

  In order to configure the VPN, you can take a look at:

  http://TechNet.Microsoft.com/en-us/library/cc725734 (WS.10) .aspx

• PIX-to-PIX VPN does not

  Here is my configuration:

  local-pix 501 connected to the DSL line.

  506th pix remote control connected to the dsl line

  unique IP address routable on each PIX (so using PAT, no NAT).

  try to create a site to site vpn. Tried of PDM, CLI via documentation cisco CLI via the book of Richard Deal. I can apparently make the connections, but no traffic flows. I have no idea what I'm doing wrong. Here are the relevant configs:

  PIX of premises:

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password

  passwd

  hostname encima

  domain name gold - eagle.org

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list outside_access_in allow accord 64.144.92.0 255.255.255.128 no matter what newspaper

  outside_access_in list of access permitted tcp 64.144.92.0 255.255.255.128 eq pptp pptp log any eq

  outside_access_in list access permit icmp any any echo response

  access-list outside_access_in allow icmp all once exceed

  outside_access_in list access permit icmp any any source-quench

  outside_access_in list all permitted access all unreachable icmp

  outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114

  outside_access_in list of permitted access esp 67.100.95.114 host 66.159.222.109

  access-list 90 allow ip 172.17.0.0 255.255.255.0 172.24.1.0 255.255.255.0

  pager lines 24

  opening of session

  registration of information monitor

  logging buffered information

  ICMP permitted host 67.100.95.114 outside

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside x.x.x.109 255.255.255.0

  IP address inside 172.17.0.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 172.24.1.0 255.255.255.0 outside

  location of PDM 172.17.0.0 255.255.255.0 outside

  location of PDM 64.144.92.0 255.255.255.128 outside

  location of PDM 172.17.0.0 255.255.0.0 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0-90 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 66.159.222.1 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  LOCAL AAA authorization command

  Enable http server

  x.x.x.x 255.255.255.255 out http

  x.x.x.x 255.255.255.128 out http

  http 172.17.0.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set strong esp-3des esp-sha-hmac

  toEssex 20 ipsec-isakmp crypto map

  correspondence address card crypto 20 90 toEssex

  peer set card crypto toEssex 20 67.100.95.114

  toEssex 20 set transformation-strong crypto card

  toEssex interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 67.100.95.114 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 9

  ISAKMP policy 9 3des encryption

  ISAKMP policy 9 sha hash

  9 1 ISAKMP policy group

  ISAKMP policy 9 life 86400

  Telnet 172.17.0.0 255.255.255.0 inside

  Telnet timeout 60

  SSH x.x.x.x 255.255.255.128 outside

  SSH timeout 60

  Console timeout 0

  dhcpd address 172.17.0.2 - 172.17.0.32 inside

  dhcpd dns x.x.x.100 66.218.44.5

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  username ckaiser password * encrypted privilege 15

  Terminal width 80

  Cryptochecksum:xxxxxx

  : end

  PIX remotely:

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password

  passwd

  EVL-PIX-DSL host name

  domain essexcredit.com

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  names of

  access-list outside_access_in allow accord any any newspaper

  outside_access_in list access permit tcp any any eq pptp newspaper

  outside_access_in list access permit icmp any any echo response

  access-list outside_access_in allow icmp all once exceed

  outside_access_in list access permit icmp any any source-quench

  outside_access_in list all permitted access all unreachable icmp

  outside_access_in esp x.x.x.114 host 66.159.222.109 host allowed access list

  outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114

  access-list 80 allow ip 172.24.1.0 255.255.255.0 172.17.0.0 255.255.255.0

  pager lines 24

  opening of session

  timestamp of the record

  monitor debug logging

  logging buffered information

  recording of debug trap

  history of logging warnings

  logging feature 22

  ICMP permitted host x.x.222.109 outdoor

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside x.x.x.114 255.255.255.248

  IP address inside 172.24.1.240 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  PDM location x.x.x.x 255.255.255.255 outside

  location of PDM 172.24.1.0 255.255.255.0 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0 80 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 67.100.95.113 1

  Route outside x.x.x.0 255.255.0.0 66.159.222.109 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  LOCAL AAA authorization command

  Enable http server

  x.x.x.x 255.255.255.255 out http

  http 172.24.1.0 255.255.255.0 inside

  SNMP-server host within the 172.24.1.11

  Server SNMP Emeryville, CA location

  Server SNMP contact Charlie Kaiser

  snmp4esx SNMP-Server community!

  SNMP-Server enable traps

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set strong esp-3des esp-sha-hmac

  toEncima 10 ipsec-isakmp crypto map

  correspondence address card crypto 10 80 toEncima

  peer set card crypto toEncima 10 66.159.222.109

  toEncima card 10 game of transformation-strong crypto

  toEncima interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 66.159.222.109 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 8

  ISAKMP strategy 8 3des encryption

  ISAKMP strategy 8 sha hash

  8 1 ISAKMP policy group

  ISAKMP life duration strategy 8 the 86400

  Telnet 172.24.1.0 255.255.255.0 inside

  Telnet timeout 60

  SSH x.x.x.x 255.255.255.255 outside

  SSH timeout 60

  Console timeout 0

  username ckaiser password * encrypted privilege 15

  Terminal width 80

  Cryptochecksumxxxxxx

  : end

  When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. Connectivity Internet is fine. I can ping the addresses outside each pix OK.

  My debug output for isakmp shows the State of return is IKMP_NO_ERROR and the SAs look OK; everything matches. Several configs / debugs available upon request.

  No idea why I can't get from one network to the other?

  Thank you!

  Charlie Kaiser

  "When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. »

  It could be as simple as because you try to ping from the PIX (because you can't) and your tunnel could in fact be working properly

  Try to ping from a device on 172,17 to one in 172.24.

  (Make sure that your access point to the opposing LAN for these host devices are set to be the PIX)

  HTH

• PIX of Pix VPN easy - Almost there... Need help :(

  I spent countless hours now implementing a VPN Pix Pix. I thought I would post this in the hope that someone could help me.

  I can get my Pix 501 to open a tunnel to the 506th Pix.  These are both on different ISPS.

  I can ping from the Pix to the Pix 501 console 506e inside the IP Interface.

  I can ping from the console of the 506th Pix to the Pix 501 inside the IP Interface.

  I cannot ping hosts either pix beyond the inside interface.

  With the active 7 recording console, I have the following error when ping to the host 172.16.54.5 from the console on the Pix 501.

  305005: any group not found for icmp src, dst outside translation: 100.1.1.10 inside: 172.16.54.5 (type 8, code 0)

  For reasons of confidentiality, I changed the IP addresses and passwords.

  PIX506e outside (isps1): 200.1.1.10
  Isps1 Gateway: 200.1.1.1

  PIX501 outdoors (PSI): 100.1.1.10
  ISP2 Gateway: 100.1.1.1

  Here is my configuration:

  506th PIX (server)
  ----------------------------------------------
  6.3 (5) PIX version
  interface ethernet0 car
  Auto interface ethernet1
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the password * encrypted
  passwd * encrypted
  hostname VPNServer
  mydomain.com domain name
  clock timezone CST - 6
  clock to summer time recurring CDT
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  access-list 101 permit icmp any one
  IP 172.16.54.0 allow Access - list SHEEP 255.255.255.0 192.168.6.0 255.255.255.0
  access-list ip 192.168.6.0 SHEEP allow 255.255.255.0 172.16.54.0 255.255.255.0
  access-list 110 permit ip 172.16.54.0 255.255.255.0 192.168.6.0 255.255.255.0
  access-list 110 permit ip 192.168.6.0 255.255.255.0 172.16.2.0 255.255.255.0
  access-list 110 permit ip 100.1.1.10 host 172.16.2.0 255.255.255.0
  pager lines 24
  opening of session
  Outside 1500 MTU
  Within 1500 MTU
  IP outdoor 200.1.1.10 255.255.255.128
  IP address inside 172.16.54.5 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP local pool vpnpool 172.16.54.201 - 172.16.54.210
  history of PDM activate
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0 access-list SHEEP
  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
  Access-group 110 in the interface inside
  Route outside 0.0.0.0 0.0.0.0 200.1.1.1 1
  Route inside 172.16.2.0 255.255.255.0 172.16.54.254 1
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-server local LOCAL Protocol
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto-map dynamic dynmap 10 transform-set RIGHT
  map mymap 10-isakmp ipsec crypto dynamic dynmap
  client authentication card crypto LOCAL mymap
  mymap outside crypto map interface
  ISAKMP allows outside
  ISAKMP identity address
  ISAKMP nat-traversal 20
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 md5 hash
  10 2 ISAKMP policy group
  ISAKMP life duration strategy 10 86400
  vpngroup address vpnpool pool mygroup
  vpngroup mygroup 172.16.2.1 dns server
  vpngroup mygroup by default-domain mydomain.com
  vpngroup idle time 1800 mygroup
  mygroup vpngroup password *.
  vpngroup idle-idle time 1800
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  management-access inside
  Console timeout 0
  VPDN username myuser password *.
  VPDN allow outside
  password username myuser * encrypted privilege 2
  Terminal width 80
  ----------------------------------------------

  PIX 501 (Client)
  ----------------------------------------------
  6.3 (5) PIX version
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the password * encrypted
  passwd * encrypted
  vpnclient hostname
  mydomain.com domain name
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 17
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  access-list 100 permit icmp any one
  pager lines 24
  opening of session
  monitor debug logging
  Outside 1500 MTU
  Within 1500 MTU
  external IP 100.1.1.10 255.255.255.0
  IP address inside 192.168.6.1 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
  Access-group 100 in external interface
  Route outside 0.0.0.0 0.0.0.0 100.1.1.1 1
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-server local LOCAL Protocol
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Telnet 192.168.6.0 255.255.255.0 inside
  Telnet timeout 30
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 30
  management-access inside
  Console timeout 0
  dhcpd address 192.168.6.20 - 192.168.6.200 inside
  dhcpd dns 172.16.2.1 172.16.2.2
  dhcpd lease 3600
  dhcpd ping_timeout 750
  dhcpd allow inside
  vpnclient Server 200.1.1.10
  vpnclient mode network-extension-mode
  vpnclient mygroup vpngroup password *.
  vpnclient username myuser password *.
  vpnclient enable
  Terminal width 80
  ----------------------------------------------

  assuming that you want to send traffic between the subnet 172.16.54.0/24 and 192.168.6.0/24 in the tunnel.

  1 ip local pool vpnpool 172.16.54.201 - 172.16.54.210< please="" use="" ip="" in="" a="" different="" subnet.="" current="" ip="" is="" in="" the="" same="" subnet="" as="" inside="">

  ' 2. you have not 'need' ip 192.168.6.0 allow access-list SHEEP 255.255.255.0 172.16.54.0 255.255.255.0.

  3. do not 501 directly ping, ping from a host behind 501 in subnet 192.168.6.0/24

• PIX to PIX VPN using Ipsec Tunnel. Need help please.

  Hello everyone,

  I have a connection of two sites using 506th PIX and PIX 501. The one on the central site (WATBCINX1 - 506th PIX) sends the packet correctly and one on the remote site (CTXPOINX1 - PIX 501) receives (checked using icmp backtrace on the two PIX). The problem is that PIX 501 at remote site return packages. I have to say that the two PIX hace a 3com OfficeConnect ADSL router as gateway Internet 812. If someone could help me I would appreciate it a lot. Thank you!

  PIX 506th Configuration (central site):

  WATBCINX1 # sh conf

  : Saved

  : Written by enable_15 to the CEDT 08:36:50.090 Friday, June 20, 2003

  6.2 (2) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate qU51Wrx8ggFHLusK encrypted password

  qU51Wrx8ggFHLusK encrypted passwd

  hostname WATBCINX1

  NEOKEM domain name. LAN

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  no names

  name 80.37.246.195 POLINYÀ

  access-list outside_access_in allow accord any host 10.0.0.10

  outside_access_in list access permit tcp any host 10.0.0.10 eq 1723

  outside_access_in list access permit tcp any host 10.0.0.10 eq smtp

  outside_access_in list access permit tcp any host 10.0.0.10 eq pop3

  access-list outside_access_in allow icmp a whole

  inside_access_in ip access list allow a whole

  access-list inside_access_in allow a tcp

  access-list inside_access_in allow icmp a whole

  Allow Access-list inside_access_in a whole udp

  access-list 101 permit ip 192.168.0.0 255.255.255.0 192.168.11.0 255.255.255.0

  pager lines 24

  opening of session

  interface ethernet0 10full

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  outdoor IP 10.0.0.3 255.0.0.0

  IP address inside 192.168.0.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.0.100 255.255.255.255 inside

  location of PDM 192.168.0.0 255.255.0.0 inside

  location of PDM 192.168.0.128 255.255.255.255 inside

  location of PDM 192.168.0.135 255.255.255.255 inside

  location of PDM 192.168.11.0 255.255.255.0 outside

  location of PDM 192.168.11.0 255.255.255.0 inside

  location of PDM 80.37.246.195 255.255.255.255 outside

  location of PDM 192.168.0.254 255.255.255.255 outside

  PDM 100 debug logging

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) 10.0.0.10 192.168.0.100 netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 10.0.0.2 1

  Timeout xlate 0:05:00

  Conn Timeout 0:00:00 half closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0: 05:00 sip 0:30:00

  sip_media 0:02:00

  Timeout, uauth 0:00:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  authenticate the NTP

  NTP server 192.43.244.18 source outdoors

  NTP server 128.118.25.3 prefer external source

  Enable http server

  http 192.168.0.100 255.255.255.255 inside

  http 192.168.0.128 255.255.255.255 inside

  http 192.168.0.135 255.255.255.255 inside

  http 192.168.11.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac COMUN_BCN

  Polinyà 1 ipsec-isakmp crypto map

  correspondence address 1 card crypto Polinyà 101

  card crypto Polinyà 1 set peer 80.37.246.195

  card crypto Polinyà 1 the transform-set COMUN_BCN value

  interface to crypto map outdoors Polinyà

  ISAKMP allows outside

  ISAKMP key * address 80.37.246.195 netmask 255.255.255.255

  ISAKMP identity address

  part of pre authentication ISAKMP policy 1

  of ISAKMP policy 1 encryption

  ISAKMP policy 1 md5 hash

  1 1 ISAKMP policy group

  ISAKMP policy 1 lifetime 1000

  Telnet 192.168.0.128 255.255.255.255 inside

  Telnet 192.168.0.135 255.255.255.255 inside

  Telnet 192.168.11.0 255.255.255.0 inside

  Telnet timeout 10

  SSH timeout 5

  username password QSECOFR privilege ELFfg8t/K5UMO89z encrypted 15

  Terminal width 80

  Cryptochecksum:74cd0cf16ef2c35804dffaeee924efdf

  WATBCINX1 #.

  PIX 501 Setup (remote site):

  CTXPOINX1 # sh conf

  : Saved

  : Written by enable_15 to the CEDT 09:27:14.439 Friday, June 20, 2003

  6.2 (2) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate qU51Wrx8ggFHLusK encrypted password

  qU51Wrx8ggFHLusK encrypted passwd

  hostname CTXPOINX1

  NEOKEM domain name. LAN

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  no names

  name 80.32.132.188 BCN

  access-list inside_access_in allow a tcp

  Allow Access-list inside_access_in a whole udp

  access-list inside_access_in allow icmp a whole

  inside_access_in ip access list allow a whole

  access-list outside_access_in allow icmp a whole

  access-list 101 permit ip 192.168.11.0 255.255.255.0 192.168.0.0 255.255.255.0

  pager lines 24

  opening of session

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  IP 10.0.0.1 address outside 255.0.0.0

  IP address inside 192.168.11.2 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.0.0 255.255.0.0 inside

  location of PDM 192.168.11.0 255.255.255.255 inside

  PDM 100 debug logging

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 10.0.0.2 1

  Timeout xlate 0:05:00

  Conn Timeout 0:00:00 half closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0: 05:00 sip 0:30:00

  sip_media 0:02:00

  Timeout, uauth 0:00:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  authenticate the NTP

  NTP server 192.5.41.209 prefer external source

  Enable http server

  HTTP 80.32.132.188 255.255.255.255 outside

  http 192.168.0.0 255.255.0.0 inside

  http 192.168.11.0 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac COMUN

  BCN 1 ipsec-isakmp crypto map

  card crypto bcn 1 set peer 80.32.132.188

  card crypto bcn 1 the transform-set COMMON value

  bcn outside crypto map interface

  ISAKMP allows outside

  ISAKMP key * address 80.32.132.188 netmask 255.255.255.255

  ISAKMP identity address

  part of pre authentication ISAKMP policy 1

  of ISAKMP policy 1 encryption

  ISAKMP policy 1 md5 hash

  1 1 ISAKMP policy group

  ISAKMP policy 1 lifetime 1000

  Telnet 80.32.132.188 255.255.255.255 outside

  Telnet 192.168.0.0 255.255.0.0 inside

  Telnet timeout 10

  SSH timeout 5

  username password QSECOFR privilege ELFfg8t/K5UMO89z encrypted 15

  Terminal width 80

  Cryptochecksum:dc8d08655d07886b74d867228e84f70f

  CTXPOINX1 #.

  Hello

  You left out of your config VPN 501 correspondence address... put this in...

  correspondence address 1 card crypto bcn 101

  Hope that helps...

• vpn Windows 2003 problem

  I had connected two windows server 2003 sp2 as Server1 and Server2 via a vpn
  Thanks to the internet.
  Each server also has a network of LAN.
  problem is when vpn is connected between two servers that LAN is disconnected. client systems cannot connect to the server via the lan.
  area of the systems windows xp or windows 7 cannot access its main server. How to solve this problem?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• While trying to connect to the VPN Windows, I get an error 868. What does that mean?

  original title: connection to the VPN

  While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.

  Vijay Kapnadak

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• VPN in server 2008 r2

  I have a problem with Server 2008 r2, I try to vpn on Server 2008 r2 server but do not receive the correct IP address.

  This is the error message I get.

  The DHCP/BINL on the local machine, belonging to the Windows administrative domain honourway.local, service has determined that it is not allowed to start.  He has stopped responding to customers.  Here are a few possible reasons for this:

  This machine belongs to a directory service enterprise and is not allowed in the same field.

  This machine cannot reach its directory service company and he met another DHCP service on the network belonging to a directory service enterprise on which the local computer is not allowed.

  Thanks in advance

  Jim

  Jim

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home