525th PIX - it'll work in our environment?

Similar Questions

• My DVD works on our television screens, but not on some of our friends in televisions

  My DVD works on our television screens, but not on some of our friends television screens.
  He plays a photo then restarts and then plays two photos then restarts then plays three photos then restart etc etc..
  What is a parameter when creating the video to digital photos or a parameter on television of our friends?

  It has nothing to do with the connected TV!
  It s is the DVD drive!

  Some players can't handle all CD or DVD! Which is one reason why the created image DVD does not work with the friend (s) disk drive.

  You will need to test various DVDs of different drive manufacturers. Some discs are more compatible as other drives

• I just got Adobe CC on my work computer. Previously, it was possible to install the Adobe C6 also on the PC at home on the same license? Is it also possible with Adobe CC, to install the software on two machines? I work in PC environment on both computers

  I just got Adobe CC on my work computer. Previously, it was possible to install the Adobe C6 also on the PC at home on the same license? Is it also possible with Adobe CC, to install the software on two machines? I work in PC environment on both computers.

  You should check with the person who arranged the subscription to see what are the conditions for individual users.  Normally, an individual subscription license allows to have two machines with working facilities.  I don't know if the same applies to a subscription of volume / business.

• Is there a version of edge hosted or provided the new Adobe host which will be available without the cloud that I work in an environment without the interent?

  Is there a version of edge hosted or provided the new Adobe host which will be available without the cloud that I work in an environment without internet?

  Not as far as I can tell, but with a subscription of cloud you can always download Edge animate when you have a connection available and later use it without connection.

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• Having trouble getting a REST to work with our ticketing system

  After building servers my team must complete the tickets for the kickoff of a 'validation' workflow to verify the server is in place and configured as expected. Our ticketing system can accept many REST calls to automate this process and prevent us from manually fill in a form again. However, it seems to use a type of authentication that is not necessarily supported by the plugin to REST.

  API authentication methods. Documentation of Gemini

  The link above is the article explaining the auth method. It's a name of user/key combination that is encoded in Base64. I have my login and my password encoded, but now I don't know how to make the plugin Orchestrator properly to meet the requirements of this API. I tried many things like shared Basic authentication setting and the 'basic' as the username and my encoded string usage in the ' password ' field, but no dice. " I still get a 401 Unauthorized the Gemini project back. Can anyone shed some light on how I might accomplish this? I met a brick wall here.

  Nevermind that. After working with our web developers, it turns out that someone has changed the method of authentication of this goofy apikey led to NTLM. I tried that and you can now query information without problem.

  Ugh! Good news is that I can now move!

• Apex 5 URL debug mode works in one environment, but not in another

  Hi all

  I use the Application Express 5.0.2.00.07 and in the development environment, I can afford to debug using the URL option, for example:

  http://LocalServer/Apex/f?p=1:1:1234567:Yes

  When I do this I see messages being logged in APEX_DEBUG_MESSAGES and javascript and CSS files used in the pages aren't the minimized version.

  However, I can't do the same thing in our test environment. URL to using this option makes no difference (i.e. no newspaper generated message and reduce to a minimum the versions of files are used).

  I even tried to call apex_debug.enable explicitly to a front page request process but no luck.

  The test environment is the same version as the development environment, but an executable file only instance.

  The application has been exported with active debugging.

  Must be explicitly enabled in the instance level or the workspace to enable debugging in the Apex? I couldn't find any hint in the documentation or this forum.

  Thank you

  Luis

  Hi Luis,.

  the problem is obvisly single "run" mode Maybe try Run and build to check if it works. Another way: set no., implemented only debugging debugging Yes and export (ist maybe there a default invisible when it is running only).

  Concerning

  Sebastian

• Hotmail or Live does not work with our Web site.

  On our website we have provisions for a person to click on a link to ask a question to the Lister or send page to a friend.  It works it the receiver has an AOL, Yahoo or based Web site address.  However, it will not work if they have a Hotmail or Live email account.  It is not practical for us to ask all our customers to set up a Yahoo account just for our Web site.  We contacted our server IP address and they are not able to find a reason that it does not work.  Email of people going to our Qued IPs to send, but just stay there.

  Thank you, Olson, JD * E-mail address is removed from the privacy *

  for Listoy.com and Photo-annonces - Classified.com

  Hey,.

  I recommend you to start a new thread in this forum here for further assistance,

  http://windowslivehelp.com/community/33.aspx

  http://windowslivehelp.com/thread.aspx?ThreadId=8ab012a0-c4c8-48F9-bcd8-a42fb57934c1

  Reset internet explorer. http://support.Microsoft.com/default.aspx/KB/923737

• Adobe Reader Pro's work in an environment in offline mode?

  Hello

  I searched this forum for my response, but I have not found an exact answer to my question:

  Adobe Reader Pro. can operate in an environment in offline mode? I do not mean its installation file which must be downloaded. My question is if this software will work without any connection to the Internet? This issue comes up after trying to work in Adobe Reader Pro in a computer without an Internet connection, and it did not work. I mean the full purchased version, of course.

  Thank you very much

  Ohad

  To find or buy you the exact name of the product, there are no Adobe Reader Pro. Adobe Reader is free, Acrobat Reader is free; Acrobat Pro is the paid for the product. The current version is ms, MS Pro Acrobat. According to me, that he needs to activate Internet and from time to time to check the license, at least for the commercial version.

• Multiple USB keys do not work on our Satellite A100

  In a conference of 4 of the 5 sticks provided by presenting his colleagues did not. The installation process has started, the message usual flashed in the status line, but then the facilities could not be completed ("Der angegebene Dienst ist kein installierter Dienst", i.e. "the specified service is no installed service' - my translation).

  The problem can be reproduced with a Sony 4 GB Stick, which can be brought to work.

  BIOS update did not help, install the new TI mass storage driver (both from the Toshiba site) did not help.

  Can anyone help? Thanks in advance,
  Martin

  State of the device is visible in Device Manager?
  Do you see yellow exclamation points or some error as the Code 28 error codes?

  If Yes, then I would recommend first installing all the updates of Windows and service pack 2.
  Then remove the USB device from Device Manager. You should remove all the USB controller and hubs from the Device Manager list.
  Reboot the laptop.

  After rebooting again Win XP should recognize the USB ports again deleted and should re-install the drivers.

  In my case it worked!

• Program seems to work in virtual environment but wrote no tension

  I have a program I want to use for an alternative output voltage that allows to change the size with the push of a button. I joined the program. Everything seems to work fine (judging by the graph of the voltage!) But when I try to run this program with the data acquisition device (usb-6211), I don't get any output voltage measured by my voltmeter. It's as if she's not writing the tension. Am I missing something simple, or this will not work? Thank you very much.

  You use the bad example. Look at the Gen Cont regeneration Wfm - Int Clk - no voltage.

• HP Photosmart 5515 stopped working with our iPad, MacBook Pro and Dell

  On the (Windows 7) Dell printer is called but says unable to communicate with the printer. On the MacBook Pro (OSX 10.8.3) it says no selected printer and I am unable to add a. It says no printer air found on the iPad. On the printer, the status of the network is ready and the wireless status is connected. The printer worked perfectly, but suddenly stopped 2 days ago. Help!

  On the machine Windows 7 running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  I recommend that you check the network connection and make sure that it is connected to your network, these days, that it is not rare that the wifi to a neighbor to be picked up by the printer.

• Best practices for the Manager of the Ucs to the smooth running of our environment

  Hi team

  We are remaining with data center with Cisco Ucs blades. I want the best practices guide Ucs Manager Manager of Ucs check all things configured correctly in accordance with the recommendation of Cisco and standard to the smooth running of the environment.
  A certain provide suggestions. Thank you

  Hey Mohan,.

  Take a look at the following links. They should provide an overview of the information you are looking for:

  http://www.Cisco.com/c/en/us/products/collateral/servers-unified-computi...

  http://www.Cisco.com/c/en/us/support/servers-unified-computing/UCS-manag...

  HTH,

  Wes

• implementation of WORK for our clients

  Hi all.
  
  We are running Oracle 11 GR 2 running Solaris 10.
  I have a database configured, but not yet configured physical standby for FSFO.
  I will be the DGBroker to failover faststart but also need to understand how to configure the clients to automatically resolve the SID of the failure on the database.
  
  In our case, we have a database with the same name on the primary and standby servers, and only the service is different.
  For purposes of discussion, let's call the DGTEST database and the services DGTEST_DG1 and DGTEST_DG2, where DG1 is primary and DG2 is asleep).
  
  So, how to set up the tnsnames for customers to automatically resolve to the correct SID that is active (as principal)?
  
  My first thought was something like this:
  

  DGTEST =
          (   DESCRIPTION=
                  (FAILOVER=ON)
                  (ADDRESS=(PROTOCOL=tcp)(PORT=1521)(HOST=myhost1))
                  (ADDRESS=(PROTOCOL=tcp)(PORT=1521)(HOST=myhost2))
                  (CONNECT_DATA=(SERVICE_NAME = DGTEST_DG2))   <=========== not sure about this part
          )

  Ji li says:
  Hi all.

  We are running Oracle 11 GR 2 running Solaris 10.
  I have a database configured, but not yet configured physical standby for FSFO.
  I will be the DGBroker to failover faststart but also need to understand how to configure the clients to automatically resolve the SID of the failure on the database.

  In our case, we have a database with the same name on the primary and standby servers, and only the service is different.
  For purposes of discussion, let's call the DGTEST database and the services DGTEST_DG1 and DGTEST_DG2, where DG1 is primary and DG2 is asleep).

  So, how to set up the tnsnames for customers to automatically resolve to the correct SID that is active (as principal)?

  My first thought was something like this:

  DGTEST =
  (   DESCRIPTION=
  (FAILOVER=ON)
  (ADDRESS=(PROTOCOL=tcp)(PORT=1521)(HOST=myhost1))
  (ADDRESS=(PROTOCOL=tcp)(PORT=1521)(HOST=myhost2))
  (CONNECT_DATA=(SERVICE_NAME = DGTEST_DG2))   <=========== not sure about this part
  )
  

  Hello

  You must add a new service runing when the database role is PRIMARY and a trigger to start new service when the role changed in the PRIMARY database.

  Please visit: http://www.mahir-quluzade.com/2012/05/oracle-data-guard-11g-overview-client.html

  Thank you
  Mr. Mahir Quluzade

• Interactive reports link doesn't seem to work in my environment

  I tried to use the link to IR in my requests based on the following documentation
  
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/app_comp.htm#BABDHIDJ
  
  Whatever I do (even manually change URL adding Anthony < columnname >: value (for example, IR_SEQID:10)) there any effect on the page.) There is no independently of the effect of the visibility of the column.
  
  I don't think he's working and I appriciate to help (for example a working application to download).
  Thank you.
  
  PS: I use APEX 3.1 with Oracle 10 g and 11.
  
  Edited by: user6479800 the 15.04.2009 02:06

  Hello

  I don't know exactly how your link is defined. I tested here: [http://htmldb.oracle.com/pls/otn/f?p=267:87] and it seems to work ok.

  The link on the EMPNO column in the second report is defined in the HTML Expression for the column as:

  <a href="f?p=&APP_ID.:87:&APP_SESSION.:::CIR:IR_EMPNO:#EMPNO#">#EMPNO#</a>
  

  Andy