5550dn printer delay between pages

Similar Questions

• HP LaserJet P1102W long delay between pages with narrow (4 "wide) paper stock

  I use Adobe Acrobat Reader X (on Windows XP) to print a page 100 PDF on HP P1102W, with 4 "wide x 11" long paper in the main tray.  There is a delay of approximately 15 seconds between pages.  As soon as I share the narrow paper for regular 8.5 "x 11", the printer takes the job at normal speed.  The PDF itself has a page PDF 4 "x 11" size.

  I tried implementing a custom 4 "x 11" paper size in the print preferences and setting the paper type to envelope, but nothing done.

  I tested with 5.5 "wide and 7.5" wide paper stock, and they have the same 15 second delay.  As soon as I put 8.5 "wide stock in the status bar, the printer goes back to full speed.

  Note that even with the thin paper stock, the first page of the job prints immediately.  The delay occurs between page 1 and 2, 2 and 3, etc.  So it seems strange that the printer does not have the 'calibration' delay before printing the first page, it delays only on the following pages.

• Stopping printer between pages.

  I have an HP Laserjet 1012, running under Vista 64-bit, I have the driver for my printer.  The printer is paused between pages. It will print one, take a break, then print another.  Can anyone help?

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=377934&submit.y=8&submit.x=12&lang=en&cc=us

  Link above is to know how to use and troubleshoot it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=377934

  Above is a contact link to HP support for their products.

  See you soon.

  Mick Murphy - Microsoft partner

• Printer skips lines and enlarged fonts between pages based on the web.

  bold text Range of printers HP c7200 connected wireless to MacBookPro w/Lion. Using the browser Firefox to version 9.0.1. Printer prints the first page very well, then the second page starts by skipping several lines and large print. PC connected to the same printer, and printer works OK. Safari works OK, too. Solutions would be appreciated.

  Problem started before the upgrade to Mac Lion. Lion updated printer driver. The same problem. Only happens when I try to print a web page or something downloaded from a web page, like a financial spreadsheet. Non-Web-based print OK. Help. Thank you.

  I saw this happen when the Page layout on FireFox browser has been set to 80% (or probably anything less than 100%). Make sure that the setting and change it to 100% and try printing again.

• HP 5550dn printing VERY slowly?

  I print an issue of the magazine with my HP 5550dn. There is a very long delay between the printing of pages (minutes maybe two or three) and the display shows "Job Processing". When I was printing yesterday and this morning, he was not doing this. Certainly, it's not a feeling of speed, but I was getting on seven pages (11 x 17) a minute earlier. Now, there are these long breaks between printing. Any ideas?

  I don't know that I'm getting low on toner but I don't know why it would affect the speed of the printer. I restarted the printer a couple of times, shed jobs, etc.

  Any help would be greatly appreciated!

  I understand the problem... I got aquite a few photos on the page which have been very low, so I don't think they would cause a problem, but the number of photos it would slow down.

• 2410 print delay

  Recently, my 2410 began to have problems printing delays. Have isolated the problem to the problem of the printer, not a computer, software or cableing. Have run the test from the printer HP - results OK but takes f-o-r-e-v-e-r to print the results. In addition, executed

  test page to the printer with the printer disconnected from the computer, the same results. May take 10 minutes to print a single page.

  Same results just trying to make a copy.  Any ideas?

  Mike

  If the printer performs a Windrow, wait 10-15 seconds before the next swath, that this is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  If there is not a delay between swaths but the printer made hundreds of bands to print the page and then check the paper settings and make sure that you have not selected inadvertently photo paper when printing on plain paper.

• Printer keeps printing a test page after each print document

  I have a HP Deskjet 970Cse on Windows XP Professional with Service Pack 3.

  About 2 weeks ago, I was receiving ambiguous messages on the ink levels, for example, saying a cartridge was ink when it was not, and after checking and replacement he told me the other cartridge was bad or empty.

  I replaced the cartridges with new and error messages went. To test others, I replaced the previous game and they worked well without empty messages.

  Then one day my computer tells me it was installing the HP printer and now I got 2 copies.

  I uninstalled the drivers and printers and downloaded the last at HP (the same I was already running years) and now it prints a test page after each print job that is wasting ink. By the print job, I mean it prints a test page once all the documents in the print queue. On the rare occasions that it will print a test between each document but this page is not the standard.

  Any help would be appreciated.

  Andy, honestly with a printer is 10 years and more, the problem you are experiencing may deal with the age of the device more than anything else. You could try hard-reset of the printer (leaving it unplugged for 20 seconds), but if what you said about the button is true - it is possible that the Board of Directors is signaling the machine to print a test page after each draw by a malfunction at the hardware level.

  In this case, maybe it's time for a new printer. If you need help to choose one, there are many solids Deskjets currently on the market from HP that would be a wonderful substitute for this machine.

  Let me know and have a great day!
  

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• LaserJet P2055X: Laserjet printing on the page lines

  When we print of this Laserjet P2055X we almost get ghost text down both sides of the paper (scan picture below). We cleaned the paper path and the roll it seems now that something will have to be replaced. Can someone tell me what is at fault, so I can get the part? Thank you.

  

  Make what is called a test of half.  Put a sheet of paper on the manual fold down tray on the front and open the drawer of the cassette.  Now print a configuration page from the menu information and when the rear edge of the paper between the printer, quickly open the toner door to stop printing.  Remove the toner cartridge and look at the picture below.  If the fault is present, the question is the toner cartridge and nothing else.  If the defect is not present, the fuser unit teflon sleeve has problems and the fuser unit will need to be replaced.  I hope this helps.

• Start-up delays between the Windows startup and the logon screen

  I have two PC's that have essentially the same Intel motherboard, but with different form factors. The smallest has a less powerful CPU and a slower hard drive. Still more has a significant delay between displaying the logon screen and Windows startup. Between the two, the display shows a cursor that cannot be moved through the mouse for 30 seconds or more, while on the smaller than the slider shows only for about a second.

  I realize, the problem could be many things, but I'm guessing that material or a device sound driver. I watched the event logs, but I couldn't see anything strange. I expected to see a "CPU does not ' or"USB 3.0 controller has a hardware problem"kind of thing. I ran Intel IPDT but he did not find a problem. Device Manager displays all of the problems. There is no graphics card on a system. I unplugged the USB cable to the printer, but that did nothing. No games are installed on a system. Nothing seems to be overheating. There is no network drive. All drives are SATA and BIOS is set to AHCI.

  Someone at - it the words of wisdom about what should I look for in the event logs?

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good antivirus program
  2. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure
  3. I would like to be sure that none of the drives are more than 75% in use
  4. I would check my memory using the auditor memory Windows 7
  5. I would like to install and run Autoruns to check what is in the startup process
  6. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.
  7. Remove Programs/applications from starting unless I really need to start

  Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer

• HP Deskjet 2540: How to print only the Page showing

  How to fix my printer to print just what is on the screen?

  For example, I am trying to print the list of the NBA team, which shows on the screen, but when I hit print, it prints five pages and the list is divided between the last two pages.

  I used to have a nice little program, years, called "Print Screen", which I was allowed to do, but it became obsolete.  My HP 2540 is new and I have the CD with any software.  Is there something out there that will help you?  TIA

  D-S-N

  Thank you banhien, but as I mentioned in the post, the list was divided between two pages when it print so choose page I was only half of the team.  However, I found a solution, provided by HP and ready to install.  I remembered a window asking if I wanted to install "HP Smart Print" shortly after I installed my new printer to appear.  I didn't know what it was, I went on it.  I shouldn't, because it's actually the version of HP of the old program 'Print Screen'.

  It allows you to choose from, with the mouse, the entire page or a part of the page, preview and enlarge (up to 200%) or to reduce and print any number of pages you want.  Really great!  I found it waiting to be installed in 'Tools' on the menu of Office Windows 8.1 under "HP Smart Print 2.1".»  As soon as it is installed and I went to the for use, he informed me that there is a 'Smart Print 2.7' update available, I did, it only took about 30 seconds and he was.  It works perfectly.

  A second solution is to go out tomorrow and buy another victory. 8.0 HP keyboard, to replace my five-year-old wireless keyboard HP Deluxe Desktop which is supported only through Win XP and who does not the "Prnt scrn" button  I guess it is old 32-bit and 64 - bit.  Hitting "ALT - Prnt scrn" used to work with XP and earlier operating systems.

  Dennis

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• BD menu with transitions between pages?

  Hello

  Can someone tell me if has) it is possible to have a video of transition as I navigate from one page to another in a multiple page menu. and (B) if it is posible to have a video transition between pages, y at - it somewhere that would help to guide me through the process of creating documentation?

  For example, let's say I have a second video 21 for my menus. Page 1 I want the video loop of the second point at the 10 second point 5. So if I select page 2 the video should play 10 seconds to 11 seconds and then a loop from 11 seconds to 21 seconds. If I select the first page that still would play the video of 21 seconds to 22 seconds then a loop from 5 seconds to 10 seconds.

  If this is possible, or if there is another way to accomplish this please let me know.

  Thank you

  Lou

  Hi all

  Here are answers to your questions for me hopefully:

  I have attached the test project again and is active and the After Effects project that created assets: http://dl.dropbox.com/u/19880923/BD_Menu_Test.zip

  Link to assets when / if prompted.

  The workflow that I use is:

  1. create motion menus in After Effects.

  2 make out like H.264 Blu-ray/MPEG2 Blu - ray. *.

  3 button create underlines in Photoshop using a frame in the menu as a placeholder.

  4 when you're done, delete the placeholder. The final .psd are "highlights only.

  5 create a new project in Encore.

  6 file > import as > Menu import * all * the menus at once.

  7 file > import as > asset import * all * proposal background/button passes only once.

  8 file > import as > timeline import movie Timeline/s.

  9 double click on each menu and link it to its video backgrond using Motion tab.* *.

  10 link each button to the timeline/s or Menu/s.

  11 set the correct video clip for each button Transition using the Transition tab.

  12 the Ctrl + Alt + space to preview collects *.

  13. Ctrl + Shift + L to check the project.

  14 fix any problems reported or read during #12 and #13.

  15 create a .iso.

  16 burn the image with ImgBurn .iso file.

  Most the time, I went out to the QuickTime Animation and use Adobe Media Encoder to transcode the assets.

  * In still, remove the two buttons manually from "00_Intro.psd."

  Yes, the crappy Preview in still is and I see the black video all the time when you use the Transitions button.

  All files in this project is transcoded into Adobe Media Encoder using the x 264 BD Pro module. (using the bundled H.264 Blu - ray or MPEG2 Blu - ray gives me the same results, iow no video black.)

  The menus in a loop, but do not use any Point on the line specified in yet.

  That's all what I do and I don't think that I have a special recipe. One thing I always do is to first import the .psd active second and third timelines. It didn't matter when it came to motion menus in even 1.0 or 1.5, and I always use this recipe when it comes to import.

  I see the same good results with 1080i25, 720p50 and 1080 p 24 (23.976). (The project that I've downloaded .iso 24.0 fps.)

  And, I never create a new project and import assets to test things and then remove the tips and deadlines and import new asset in this project, when they are done. Only, I jump in again and begin to import things when * everything * is ready to go. I never even use for transcoding, I bring only in the transcoded elements that are ready to go. Remove and re-import the other assets was (is?) a good recipe for disaster in yet. Removal of delays and create new ones has been a nightmare.

  That's what I use:

  Player: OPPO BDP-93EU

  Media: Verbatim BD - R (Verbatim #43712)

  BD-burner: HP BH30L of BD - RE (it came with the HP Z800)

  I had it makes me know that once a person had the same problems that some of you have, iow paused and video black with BD disc I created. I guess I haven't done too many BD drives. I don't know what drive Blu-he had used. About a year ago. I tested my BD drive in the Oppo, n, Sony, Philips drives and disc no problems. Everyone has been new players of 2011-2012. I'm afraid I don't remember the exact player models.

  It happens from time to time I do not see the black video, but when we look more closely it is me who has returned on the black frame of After Effects. So it's easy to do evil, so import clips into Premiere Pro and rub the clips looking for video at the end of the clips black is a good habit to keep out the clips.

  But, without a doubt, this is an issue that will be fixed in all readers of comics can be used without any problem.

  Please send a bug report or feature request to Adobe here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  In my opinion, send a feature request is the best way to go.

  / Roger

• Print the brochure-page editing and print dialog box questions

  Hi people,

  I have a small organic seed in Southern California company and I am looking to do our first seed catalog using what I would describe as a "zine" format: a letter-sized document that is folded, resulting in a booklet composed of half pages (I don't know if there is a more technical term to do this (, please correct me). I use InDesign 5 and Mac OS X Snow Leopard.

  
  

  When I started doing the document, it seemed logical to start with my page as a 'half letter' size, because I had read about the "Print booklet" feature of Adobe that would automatically print the pages in the order appropriate for folding. After doing a few pages of my catalog, I decided to do a test run this function, as I suspected things may be more difficult that it seemed. I ran against two problems while doing so, and I hope someone here can help give me an idea.

  
  

  The first problem is that I can't get the pages to impose properly by adopting a system of alternative numbering on the pages themselves. To explain: I chose '2-top stitching horse' in the settings of the printed booklet. I have a paper of 10 pages of 5 blocks spread. In the menu document, I put my layout to start on page 2 so that gaps appear side by side in the pages. However, I also want page numbers on my zine so I started a new section number (which I gave an A prefix) on what is ultimately the fourth page of the layout. This numbering comes as '1' on the fourth page and produced consecutively from here (pages 4-10, on the spread in the page layout area are labeled 1,2,3,4,5,6,7 on the pages themselves). It seems that booklet printing think my second section (A) on page 1 is where it should start stitching horse formatting. The help section on booklet written print Adobe, 'If you have split the document into sections of page numbers, you should enter section page numbers (for example, Sec2:11) "in the range field.". However, they recommend only do that if you want specific pages to the format ranges, while I would like to format the entire document. However, I tried to do that, suspicious that the first three pages were not formatted properly. However, I could not yet find a way to clarify my section A in the range box. I typed in things like "SecA:1" but I get a message that says: "one or more of the specified pages aren't valid page names." I note when I stripped the formatting of the document the print booklet feature requires the pages in the correct order. Thus, this problem is not the end of the world. However, what I lost is the ability to have numbers of pages printed on my document, unless I want to manually add to each page (and then having to deal with reformatting if I ever add or remove pages of the document in the future).

  
  

  The second and more important problem that I have is to get the pages to print even close correct. I have a printer Brother HL - 5340 D laser has a two-sided feature, and I thought there would be a way to print just two pages of my catalog (half-letter pages) on a letter page size, side by side, double faces and in the right order for folding. After trying a number of different options (by changing the page size and the page orientation in the print area), I was not able to get the printer to print these pages, with success, or even in the right size and orientation - or even on the set of law, indeed. Once I played around with all the settings I managed to pull of "Tray1" (and created a preset in the OS X print settings), but I can't understand how I got this opportunity to stick. Of course, Adobe recommends using their own printer on the Brother driver dialog box, but duplex, for example, is impossible without ebb in the print based on the OS setting. I turned, something that has worked well with other InDesign documents I created. In this case, however, I have not been able for duplex printing to work.

  
  

  I wonder if there are conflicts being created between two printer settings, or maybe I just made a mistake starting my catalog with a letter paper size "half" and now try to print two of my pages letter half on a sheet of letter-sized (and double-sided, at that). As a neophyte InDesign (six months experience) I still wonder if there is something really obvious that I'm missing.

  
  

  Does anyone have a picture of my situation?

  Waiting patiently. Thanks people...

  
  

  Quin

  chirrchirr wrote:

  Peter,

  See the screenshot above (two positions to the top) where I show the "spreads" I made in the document. I have 56 pages in 29 spreads

  The number of "spreads" appearing in the pages Panel is misleading since several ov them don't have only one page. I do not see the whole Board, of course, but my guess is that all the "spreads" we do not have two pages. Normall is the first and the last spread that are singles, but you have done strange things with the numbering.

  In any case, is printing print booklet 28 pages. The only way that can happen if additional blank pages are added is if you did not include the original White you have created. You have to go into setup to display the print dialog box and select include blank pages there.

• The print page opens not when I try to print a Web page.

  I use Firefox for many months and so far I have had no problem printing a Web page. I was away for a week and discovered this problem yesterday when I tried to print a Web page. Maybe there was some changes during the week that I'm not aware of?

  This happens on all websites or is it on particular websites?

  Normally, a button to launch a page in the print format appears in a new window. Blocker integrated in Firefox allows popups generated by a user by clicking, but if you have additional security modules, maybe one of them is blocking those.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?