5701na stream 7: Stream 7 & sp72220 Kionix G-Sensor Driver to

Similar Questions

• 5701na stream 7: Stream 7 Kionix sensors and automatic rotation

  Hello
  I have two tablets of 5701na 7 stream, that were running Windows 8.1.  I did a clean install of Windows 10 on both.  "E/s of sensor devices" section in Device Manager shows the device of the accelerometer is installed and functional.  "Sensors" section shows the 'Kionix Fusion of sensors' device, but this device is marked with an exclamation point, and indicates the status of the device that the "device could not start, error 10". "
  
  I tried the original commercial version of Windows 10 Pro N and the latest Version 1511.  I also tried the Windows 8.1 and Windows 10 drivers on HP website.  I tried various downloads of individual drivers (inf25 and inf24) and install the devices manually as legacy material.  Even when the devices appear to install correctly, 'Sensor of Fusion Kionix' device stop with error 10, usually in a few minutes.  And I tried all the combinations on the two tablets, just in case it was defective.  The two tablets were turning correctly when running Windows 8.1.
  
  Everything works as expected, including modes of Tablet and desktop computer and the Windows button that switches between the display of tasks and the office.  But in Control Panel-> display and in "all the settings-> devices-> display" settings there is no list drop-down or turn on or off for auto-rotation.
  
  I installed and re-installed the OS at least a dozen times, trying different driver combinations in different orders, but the sensor Fusion won't stay not just active.  Has anyone else had the same problem?  Windows 10 is better suited to the Tablet, and I'd be disappointed to return to Windows 8. 1.
  
  Thank you.

  Turns out be the version "n" to win 10.  The "n" version not supported the pilot of Kionix, while the "n" version is apparently not.  As far as I can make out, the "n" version does not install the required driver update framework.  The driver seems to run through all the options, but it is not actually install the driver correctly.  With a version "n" not to win 10, driver installation takes about 10 seconds, the part of driver framework seems not to be triggered and the package successfully installed / active detection devices.  If you plan to install Win 10 Pro, remember to insert EI.cfg and PID.txt files in your USB image, substitute the Win 8.1 home activation key which is burned in the BIOS.

• 5701na stream 7: too big for the screen Windows

  Hello

  I have a problem with the size of windows on my screen. Quite often and especially when I face problems of system such as updates, the windows are larger than the screen. There seems to be no option to resize manually or to tell them to fill the screen and just.

  This means that, for example, the OK button is the bottom of the screen, with no way to resize the window or scroll down (sometimes it is not broad enough on the bottom, but by hiding under the Dock down, so try to hit the OK start something else)

  I tried to work around using the keyboard equivalent (tabs etc.) but I often stuck into problems almost Terminal.

  All the ideas!

  Justin

  Hey @JustinWorsley,

  Welcome to the forums of HP.

  I understand that you are having problems with sizes of application being too large in Windows 10 window.

  Your tablet screen resolution meets the minimum requirements for Windows 10. Make sure that the resolution is set to 1280 x 800. If it is not already in 1280 x 800, try changing that first and let me know if it helps. If this is the case, you may need to reinstall the drivers GPU.

  Thank you.

• Stream of 6537 s on the drive with another card as well.

  Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than that, but we can't go much more slowly. We need to store the result in a known file format so we can analyze it later.

  From the example of reference for data streaming of double PCIe 6537 s example of disc (http://zone.ni.com/devzone/cda/epd/p/id/5315), it seems simple enough to add another PXI card.  We are OK with that.

  What is the best approach to take the card sync?

  Our first choice is so far:

  To read a value from the sync every time it happens around the loop of the producer; i.e. every 20ms. This will taste at 50 Hz, but that's OK. Store us the values in a table of fixed value size zero and push the table on the queue at the end of the case 'true '.  It's easy enough but... The 3 1 d Raw U32 DAQmx readings work quite quickly to allow the Syncro values to the queue, in the 20ms window? (We have operated there should be about 16 MB of data per card for each reading). If not, is it close enough that he could be twisted so that sync data can be queued as well?

  Our second is:

  We plan to read data in sync in a zero arbitrarily large array initilized, especially if we know the size when write us data to the file. This can be filled at 20 Hz, in what I'll call (or the love of argument) a producer of the second loop. We could protect access using semaphores. In the loop of consumption, we read the three blocks of data, then data sync; That is to say:

  • read three lots of the queue database
  • lock the semaphore
  • write the content of the table
  • zero the content of the table
  • unlock the semaphore

  Does anyone know of a decent/better way to do this?

  Are we on track?

  Thank you

  Jon.

  Hi Jon,

  Yes, I think that your hypothesis is correct.

• Laptop HP Stream 13-c120nr: external CD/DVD drive

  I just bought a HP laptop which does not contain a CD/DVD drive.  I need the drive to load a program disk.   I guess I can connect an external drive to the computer.

  My question is twofold:

  1. can I easily connect an external CD/DVD drive to the laptop? and

  2. as I will use the reader very rarely, I could use a suggestion as to what brand and model of external hard drive to buy?

  Thank you

  Hi there @MikeZ3,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for an external drive. I'll be happy to help you.

  Any USB external DVD drive with the correct drivers should work.

  As I don't know your needs, I suggest you do a search for the USB external DVD drive.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!
  Please keep me updated on how the thing happened.

  If you need more assistance let me know and I will gladly do whatever I can to help.

  Thank you.

• Stream x 360 11-p010na: touchscreen driver

  Hello

  I had a fresh new windows 8.1 64 installed on my notbook.

  After looking in the page drivers to support, I can't find the driver of screentouch.

  so my question is:

  -where can I find this driver to activate the touch screen?

  thaks and good day

  Hey @issam1975,

  Touchscreen drivers use the Human Interface Device (HID) Protocol to communicate. If you look in Device Manager they will appear here.  Here is a link that might help.

  You can try to use the Windows Update Troubleshooter to fix all drivers that did not come through for Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Thank you.

• Live stream 8 doesn't screen flip during a rotation

  Hello

  It's been a while since my Stream 8 screen doesn't flip/turn not when the device is rotated.

  I tried to look for the solution in the settings menu, but it is not yet resolved. Are there any suggestions?

  Thanks in advance

  Thanks for the idea of Flying Kiwi.

  My problem is now solved. What I did exactly the same thing with what I've done previously. I manually downloaded the kionix donwload page and HP support g sensor driver, but this time, I chose 10 of the search filter windows.

  So I downloaded and let it installed in the HP support mode.

  Automatic rotation now works fine

• Windows XP SP3 with router Belkin 802.11n Play 600N HD: how to minimize the impact on performance wireless streaming?

  Among the other computers in my house, I have an old Pentium 4 2 GHz Dell under Windows XP SP3.  I want to take all my music and put it on a (Belkin streaming) attached to the router hard drive, so I only store - and keep - it in one place, but can access to any of my computers - including this old Dell.

  The Question Is: there will be any type of CPU and/or memory (although I'm more concerned by the CPU) overhead streaming music from my drive attached to the router to my Dell (and if so: is it possible to mitigate that)?

  Specifically, I mean compared to run music directly to internal hard drive of the Dell: if any CPU or memory 'cost' for it in streaming on the network beyond what it already takes to play music.

  If it makes a difference: I use Windows Media Player to play the music.

  Hi RDougShelton,

  There will certainly be performance lag if played that music will be broadcast online in and the router will be bandwidth. For example, an impact on the speed of surfing.

  When you play locally on the hard drive, the bandwidth will be unaffected, however, you can face sligh increase the CPU usage.

  Hope that info help.

• HP flow 8 Tablet - 5801: device driver missing Windows 10

  After completing a clean 10 Windows Installer on my tablet of 8 HP - 5801 stream, Manager of devices indicates an unknown device with a directory "on controller I2C. I don't seem to have problems with the Tablet, but I'd like to solve this problem before I have no problems. Where can I find this driver?

  is steven

  Hi, Steven:

  Based on the ID that you've posted, you need the driver for this device...

  The driver allowing Kionix G-Sensor allows the accelerometer sensor that provides the functionality of control of rotation that is usually used in tablets and mobile phones. This package is provided for the laptop models running a supported operating system.

  File name: sp72220.exe

• Play a movie bought on iTunes that is located on an external drive

  I just bought a Seagate wireless more HDD. They advertise being able to play music and movies mp4 also. I can play music, even if it's not through iTunes. But the movies that I bought through iTunes will not play. Is there a set up to make them play? Or is it something to do with DRM? It does seem to be a way of saying the video app where the movies. Videos of the sample that came on the hard disk activity. Just not movies that are purchased.

  It is an Air iPad I have.

  You cannot play/stream iTunes downloaded, purchased movies more outside readers another external wireless a drive connected to a computer and using sharing home to transmit the contents of iTunes movie to your iDevice in iTunes on a computer only.

  Seagate used to use a programming flaw in iOS 7 / 8 that allowed content iTunes movie to play through the iOS Safari web browser, but Apple blocked / coded on this ability to iOS 9.

  So no way iTunes purchased content film play streaming from the wireless of Seagate drive.

  There is software out there to get around that, but we are not allowed to discuss the issue due to terms of use of these support forums.

  Do a search on the web for possible solutions to your dilemma

  Good luck!

• Cannot install OS on my Satellite L30 - 11 d

  I tried for days now to install an OS on hard disk but everytime I get the same message "hard drive not found"

  I can't activate my controller SATA in BIOS since this isn't an option.

  I created streaming versions slipped with the spliced driver XP using nlite... working on all the machines I have except this one.

  The machine originally had windows Vista Home Basic on it... Since then, so I didn't find 700 MB vista home version, that I burned and seemed to work fine until that installation point when he says theres no driver?

  Any ideas guys? I'm losing sleep over this

  Hello!

  It seems that you have integrated a bad diver. As far as I know this laptop you need Intel Storage Manager you can download from the Toshiba site.

  In addition, I can recommend this article:
  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

  Good luck! :)

• P7-1490 Pavilion saying that the hard drive needs to be repaired or replaced

  Could Netflix streaming on the computer and look at the poster on the monitor have shortened the life expectancy of the hard drive at all?  Otherwise, I do not use the computer that much, and I'm surprised that the drive lasted only 1 1/3 years.  What part of a computer using streaming more?  The processor, hard drive, both?

  No, I sincerely doubt that the photos could cause such a problem.

  If the drive is empty, do a full format (not quick format) to make it clean.

  Just to be sure, it will be useful if you could do a bad sector scan.

  Here is a link to help you with bad sectors.

  http://www.howtogeek.com/173463/bad-sectors-explained-why-hard-drives-get-bad-sectors-and-what-you-can-do-about-it/

  When cross you again the problem, bring it to a HP service center and fix it.

  Have a good!

• 8 flow: Flow 8 OTG

  I was told that it is possible to start a stream of 8 from a flash drive if you have enabled OTG in F9 in BIOS

  I don't see a way to do it, can someone please advise. I don't see any precise means to allow the OTG.

  I tried to set USB as the first boot option, but it doesn't seem to work.

  Hello new adam,

  As to the question about activation OTG in Bios...

  You enable not the OTG. OTG is just an adapter cable used for tablets and phones that share the port of loading with a normal USB port, a little like an all in one port.

  Depending on the question you posted in another thread, if you try to install Windows 10 via a USB flash drive, you must go back into the bios and Disable Secure Boot first.

  F10 for Bios configuration > System Configuration > Start Options > Secure Boot.

  Save the changes.

  Your tablet will have no problem see the Windows 10 USB installation drive if you created with the create a Windows 10 support tool.

  You will want to have an OTG adapter, 4 port hub, a wired keyboard and mouse for help with the installation.

• How to read from the beginning to reference trigger?

  Hello!

  I develop a system a little on a NI DAQmx 6025 and want to know how can I get data from an early relaxation of reference.

  I use "AcqVoltageSamples_IntClkDigStartAndRef.2008" to control the unit in c#

  If I set up the Starttrigger only, I can trigger... (the measure is to start by climbing aboard PFI0)

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  myTask.AIChannels.CreateVoltageChannel (physicalChannelComboBox.Text,"", (AITerminalConfiguration)(-1), rangeMin, rangeMax, AIVoltageUnits.Volts ");

  myTask.Timing.ConfigureSampleClock ("", sampleRate, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, 1000);

  myTask.Triggers.StartTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeStartTriggerEdge.Rising);

  Reader = new AnalogMultiChannelReader (myTask.Stream);

  ...

  drive. SynchronizeCallbacks = true;

  drive. BeginReadWaveform (-1, New AsyncCallback (myCallback), null);

  ... MyCallback...

  data = reader. EndReadWaveform (ar);

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Now, I want to stop my measurement by the trigger of the reference, so I set up the Referencetrigger on the same source (PFI0)

  myTask.Triggers.ReferenceTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeReferenceTriggerEdge.Falling, 10);

  (This line is after the configuration StartTrigger)

  If I start the task and give the triggersignal, the measurement starts. But now the measure must stop if I start PFI0 again!

  I don't know what I have to do to become a measure from the beginning to trigger Stop... I mean PFI0 PFI0 rising Edge edge

  Thanks for the support!

  Suchen für alle die noch immer nach einer Antwort, ich habs jetz!

  For all who are looking for this answer, I get it now!

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  myTask = new Task ("aiTask");        Create a new task
  Initialize local Variables
  Double sampleRate = Convert.ToDouble (rateNumeric.Value);
  Double rangeMin = Convert.ToDouble (minimumValueNumeric.Value);
  rangeMax double = Convert.ToDouble (maximumValueNumeric.Value);
  Create a virtual channel
  myTask.AIChannels.CreateVoltageChannel (physicalChannelComboBox.Text, "", (AITerminalConfiguration)(-1),
  rangeMin, rangeMax, AIVoltageUnits.Volts);
  Set up sync Specs
  myTask.Timing.ConfigureSampleClock ("", sampleRate, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, 1000);
              
  Configure start and reference triggers
  myTask.Triggers.StartTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeStartTriggerEdge.Rising);
  myTask.Triggers.ReferenceTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeReferenceTriggerEdge.Rising, 100);

  Check the task
  myTask.Control (TaskAction.Verify);
  Create the object reader
  Reader = new AnalogMultiChannelReader (myTask.Stream);
  Start the task, and set the playback position
  myTask.Start ();
  myTask.Stream.ReadRelativeTo = ReadRelativeTo.CurrentReadPosition;

  AnalogWaveform[temp];

  {while(!myTask.IsDone)}
  Temp = reader. ReadWaveform (60000);
  }

  myTask.Dispose ();

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Mit dieser Lösung kann man von mension zu messen mension.

  With this resolve you can measure from edge to edge.

• Having problems become waving Services start to work.

  I get the following message if displayed in a window BACK:

  node.js:205
  throw e; error process.nextTick, or "error" event on the first tick
  ^
  Error: Cannot find module 'delayed stream.
  at Function._resolveFilename (module.js:318:11)
  at Function._load (module.js:263:25)
  at Module.require (module.js:341:17)
  to the demand (module.js:352:17)
  to the object. (C:\Users\Chuck\AppData\Local\Google\Chrome\User Data\
  Default\Extensions\cnijnnaimeaacneklcndcafbnkeicckh\0.9.15_0\services\node\node_
  modules\ripple-emulator\node_modules\request\node_modules\form-data\node_modules
  \combined-stream\lib\combined_stream.js:3:21)
  at Module._compile (module.js:416:26)
  to object... js (module.js:434:10)
  at Module.load (module.js:335:31)
  at Function._load (module.js:294:12)
  at Module.require (module.js:341:17)

  Anyone know what is causing this error message and how to fix it?  Thank you.

  Find the solution/work around in another thread:

  https://github.com/BlackBerry/ripple-UI/issues/750#issuecomment-16137118

  Looks like the package delayed stream is missing from the installation drive for some reason any.

  Basically the need to go into your folder of ripple under Chrome extension and install the package of back flow.  Do in a command prompt:

  CD C:\Users\\AppData\Local\Google\Chrome\User Data\ Default\Extensions\cnijnnaimeaacneklcndcafbnkeicckh\0.9.15_0\services\node

  install NPM delayed stream

  Worked fine for me after that.

  Well if you use a profile of Chrome as the default value, change the value by default with ' profile #