8 flow: Flow 8 OTG

Similar Questions

• HP Jet 8: HP flow 8 tablets. The screen is not responding after dong a reset.

  I'm trying to recover a Tablet HP flow 8 because the latest version of Windows 10 locked up the tablet.  The problem I have is when I start the Tablet either by using the power button or reset the sequence (the volume down and power on), I get a message «has requested a change of the TPM on this computer configuration...» "with a Yes or no option to proceed.  The question is when I press the screen to answer 'yes' or ' ' nothing - happens the screen is inadmissible.  I have attached a keyboard and mouse to the Tablet hoping I would be able to complete this option, but nothing happens.  I have attached a CD-ROM with a 8.1 to windows boot disk and nothing happens.  Basically, I'm stuck with the brick.

  Any suggestions or help would be greately appreciated.

  Kind regards

  Mike Perrotto

  Hello, you use an OTG adapter and a USB hub powered to fix the keyboard and the mouse, and it still does not accept your entry?  You could try just the adapter of the OTG and the only keyboard.  Otherwise, try to turn on while raising both the volume and volume keys together to reset the BIOS.  If this does not work, try to leave completely discharged battery to reset the CMOS.

• Flow 10 7 HP - Windows does not start, I can't get into recovery 8.1 because cannot boot from USB-HELP Please!

  Hi all, I'm new here!

  I am (excuse me: has) with a stream 7

  A few days ago, I tried to install Windows 10 TP renovation 8.1 with Bing. After a while of waiting, he managed, but unfortunately I have forgiven to in SSD Tablet hp drivers, thinking that they were not necessary. If the touchscreen, WiFi and all the other stuff has failed. After I've got collegated by OTG, a keyboard and a mouse, that I managed to use Windows 10.

  Try to install the drivers, my fault, I opened a .exe from Realtek (perhaps for audio), Tablet asked to reboot and after that I can't access Windows anymore.

  I tried to start Windows 8.1 from a USB key, but it does not start, the same even if I disable secure boot.

  With disabled bitlocker Windows gives this error

  

  In the start option, I set these settings

  

  I put the USB in this way:

  

  The stream does not consider the USB absolutely XD

  If I turn on again the secure boot Windows gives this error (which 99% is caused by the .exe I installed):

  

  Restart the flow some time with secure boot it goes in a menu (where touch screen works) where there are a lot of options to reset Windows, but none of them doesn't work. If I try to format in this menu it asks password for my account, but it does not accept the mine :/

  If I try to open the collection (from volume button when it starts less) it gives this message:

  

  Waiting for relief,

  Thank you for your patience!

  @fotogruia in my case, the indicated operating system was windows 10 and as I wrote it has worked well. Good luck!

• [HP JET 7] Macrium key bootable usb omitting 7 flow HP Tablet boot

  7 HP flow is connected via an otg cable to a 4 port non powered usb hub.  The hub contains a keyboard, mouse, and usb key.

  The recovery media is through the Macrium Reflect (that is installed on the HP Jet 7 Tablet) on a usb key.  Media is created correctly because it has been tested in another machine and it starts successfully.

  I entered the start menu of the HP 7 flow by holding down the volume key and power when starting.  In the start menu, I changed the boot order so that usb sticks/multi-utilisations are the first options in the boot order.  Secure boot has also been disabled.

  Within Windows 8.1 with Bing, I used the following to restart the Tablet and tried to boot the usb key:

  charm of settings-> change advanced pc-> update and Recovery-> startup-> restore settings
  New screen with "choose an option.
  Choose "use a device.
  EFI USB device

  On reboot, I get the error message: failure of selected boot device

  I want to make sure that the boot with a usb key works as Macrium backup is useless unless I can actually start the system up to the restoration of the image.

  Any suggestions?

  The issue is not with the software that I use.  The problem is with the tablet itself.   What is so difficult to grasp here?  As usual, I understand the question myself.

  I love how everything is never the question with the hardware itself, but ALWAYS something else.  I have been more than sufficient depth with my explanation, but the same lame attempts at a solution are presented over and over again.

  I'm done with this "useful" forum

• 8 flow HP stuck on recovery: 8 HP stuck on the recovery flow

  Dear friends,

  I have a flow 8 Signature Edition, as soon as the update of windows 10 has been launched, I installed it. After that, I tried to reset the tablet to get a clean install and erase all my data. It got stuck, and after much research, I got the Tablet via a cable otg with the recovery image on an sd card.  At the procedure and went smooth until I got to the screen where I have to decide clear or not module TPM. I want to click 'Yes', but because that I do not connect a cable otg and touchscreen keyboard is disabled I'm not going anywhere. It was a touch on the beginning of the procedure but now its stuck on the screen that I mentioned previously (see photo below). Tried to touch, buttons, power + volume down, connect the keyboard or mouse, even empty the battery and recharge. Nothing has worked, still stuck. What can I do? Even if I have to reset everything again is there a solution? Thank you

  

  Hi, I can not see the image yet, try holding down both the volume up and volume down at the same time turning to reset the BIOS.

• HP 7 (5701ng) steam: questions and win 10 flow 7

  Dear HP Windows 10 gurus,

  I upgrade my HP Jet 7 (5701ng) Tablet to Windows 10 twice now, but I'm having a few problems that I hope experts can help with.

  1. The F11 on Start method of the BIOS to perform a factory reset is not available more after the upgrade to Windows 10. It is really important that Stream 7 users have the ability to easily perform a reset factory must take place 'the worst'. I recently had time to big problems after installing a 3rd party on my 7 Stream antivirus product and although I could have run his own routine through Windows uninstal, I would have liked an option with restore instead, as it can then be no doubt on bits left out etc.. What HP wil do about it?
  2. My tablet is (depending on your suport tech Department) intended for the German market. When I bought here in the Ukas a factory Refurb, the device came with a Euro to UK adapter attached to the charger Euro area - an acceptable solution. I recently got the support of HP recovery on USB by HP and the tech support person said it's a tablet of the German market, the content of USB support will be for the German product, but will have an option of English language. Indeed this is the case, but even if I chose English as the language at the beginning of the restore process, there are still many places where German dialog was displayed and I don't want that. In view of my camera has been renovated plant for sale on the British market, is there a chance the English British recovery menia will work instead?
  3. As a result of the foregoing, it is very painful to have to restore Win 8.1 update, before upgrading Windows 10 - and of course the free upgrade is only enjoy unti 1 year after Win 10 is out There will be recovery of 10 Windows media to Stream 7 available and there will be a way I can replace the memory stick cntents with it when it becomes available (to win on the detachment of the memory sticks etc.).
  4. The 7 flow does not come with the GPS, but I would use Microsoft on Windows 10 cards. What is the recommended HPs Connect USB Dongle GPS to add this feature to the jet 7. I would have bought a refurb flow 8 but theyjust don't seem to be available here in the United Kingdom (at least not at similar/only slightly more expensive prices for what I paid for my Stream7).
  5. I often have problems to get the battery percentage to get just by tapping the icon in the system tray battery - maybe it's a problem of Windows 10. Can he be looked at and resolved please.
  6. I would like to be able to load the stream 7 at the same time as use an accessory USB however a ' on the go ' cable (OTG). Is there a way that this can be done for HP to know?  I saw claiming for OTG cables feed as well, but such a device would work with the 7 flow? The reason why I want it is because the battery runs out very quickly under certain circumstances.
  7. The version of Windows Media Player on my Stream 7 will maximize not out to a full window (by clicking the button maximizes next to close Red Cross has no effect). In addition it will let me play my MP3 files or my WTV files I had previously recorded on my PC Windows 7 Home Premium Desktop - even if Windows 7 PC version of Windows Media Player should allow the reading of WTV files. I realize that Windows Media Center is not included in Windows 10 but it is important that Windows Media Player which is fully functioning and these two problems are a real problem for me. "The power within HP" talk please with Microsoft for a solution on this one. I realize that Windows Media Player not copng with WTV files can be associated with the absence of Windows Media Center, but I don't see why the relevant CODECs can be installed in Windows Media Player for this feature to work. Any help in doing this would be much appreciated.

  That's all I can think of for now. It's time for my sleep of beauty here in England but I'll check here once again in the morning ;-)

  Photoray002 wrote:
  

  Find interesting.

  If you do, come back and let me know how it works Flying Kiwi.

  Thank you.

  This morning, I received the hub surrounded by bubblewrap in a blink of an eye bag and I tested it out (actually I am writing this reply using my Microsoft Wireless Desktop 3000 keyboard and mouse with the USB dongle connected by the hub as well as the original HP charger and lead). Cyrex experience, isn't that everything works perfectly as advertised for me also. The hub, switch is in position 2 (as has happened) is the position designated for this model of Tablet. Earlier, I was playing files WTV through Windows Media Player to a USB memory stick connected via the hub and which also worked perfectly and the battery charged throughout the.

  After my a few hours of testing today I can say deep I think we have a cheap and effective and compatible with this product solution!

  With respect to the other items on my list, I'm little bit to find solutions to those as well (although I was not happy to have to install a 3rd party product called GPSDirect in order to get my Bluetooth GPS receiver works with Windows 10 cards). I am convinced that this should be responsible for setting as they were responsible for 'break' this compatibility in OS latest due to the location/sensor API revised Microsofts.

  Once I get my new memory stick I will try the new installation of the OS from scratch using an ISO and pilots provided good HP that this will create not a Windows 10 sharing recovery that can be activated at the start with F11 (at least I don't think it will be), as well as from my factory equipped HP USB Windows 8.1 media restoration Bing standby if the disaster occurs I think that this should be a satisfactory solution to this problem. Overall, things are much better, and this forum has been a great help!

• Audio USB device not recognized by flow 7 Tablet PC

  Half the reason I bought the 7 flow was to use it has a music player with my D2 USB Audio DAC Headdphone Amp iBaso.

  The device is recognnized by my Office Win 8.1 and all other computers, I plugged in.  Why it is not recognized as an audio playback device is beyond me.  I tried all of the suggestions that I could find on the net without a bit of luck.  Is therte a reason why this feature has been disabled on the 7 Strwea?

  Problem solved!

  It turned out to be a combination of the usb cable and the USB OTG hub.  The iBaso has been specific cable on the device being recognized on my desk.  When I tried the work cable witht the OTG hub on the 7 of flow is not as usual.  But when I tried the market good adapter monoprice it worked.

  Audio usb solves the problem of horrible noise with the jet 7 lookiing for a fix for anyone.

  The OTG hub works with a mouse and a player mSata perfectly, but not with the iBAso CAD.

  Thanks to all who responded to keep me by train.

• How many time you listen to a song to count as "played" (= 1 flow)?

  How many time you listen to a song to count as "played" (= 1 flow)? I know it is 30 seconds for Spotify, is it different for music from Apple?

  Thank you

  Leo

  Until the end of the song.

• Intrepid Beta testers needed. Discover the flow of information to the poster to the left of the text.

  Intrepid Beta testers needed. Discover the information flow of the poster to the left of the text box.

  Adjust the format and presentation of the ASC Web Pages

  

  You can see a screenshot of the discussion How can I find my own posts?  That's what your experience of the CSA will be after you apply the style of the user.  I made the changes to move the user information. I have built on the work of Hiroto, and. turingtest2.

  R

  Today is 24June

  Most recent PasteBin is dated 22June - what to test?

  EDITadded

  Why not just post the link to PasteBin here?

• Audio dropouts in streaming for magical flow device

  Hello

  I had a certain audio hang ups today.

  Check the journal of Unix, what is happening:

  26/05/2016 15:06:29.889 configd [52]: network modified: v4 (en0:192.168.0.4, en3 +:192.168.0.2) DNS * Proxy SMB

  to, I think, the same time as the break in the game.

  Has anyone else seen elsewhere? He is not related to hiring, occurs during playback of MP3 and FLAC.

  Looks like a problem with the network for me, however.

  I use an Airport express to keep WiFi (faster flow network).

  First of all, you did recently updated on your Mac or the AirPort Express? You use a VPN connection to the streaming source? Using Back to My Mac? Since you play files FLAC, I assume that you do not use iTunes as the audio server... correct?

  I recommend that you start troubleshooting cela by disabling the DNS cache on your MacBook Air with this command in Terminal:

  sudo dscacheutil-flushcache. sudo killall - HUP mDNSResponder

• irregular flow oddly with two TCs problem

  I was mystified by a problem with a strangely inconsistent flow (i.e. read/write speeds) involving my two time capsules, which consist of a 1 TB of third generation unit and a unit of 2 TB of fourth generation. The 4th-gen is configured as a router connected via a cat-6 cable on my cable modem, and the 3rd generation is configured in Bridge mode and connected via a cat-6 cable to the 4th gen. I have a MacBook Pro 15 "(mi-2015) running OS X 10.11.5 which is connected via a cat-6 cable for the TC of 4th generation." I changed the cable, without result. I've updated the firmware on both cameras from 7.6.3 to 7.6.7 without result.

  What I observed in copying a file of ~ 1 GB to and from each of the Finder window time capsule, is that on the first try for each flow is good: 30 to 50 MB/s on the 3rd generation and maybe 50 - 75 MB/sec on the 4th gen unit. But if I try again (and each subsequent attempt), the flow is * much * lower in each direction, ranging from 30 MB/sec up to 7 MB/s; It is with much longer correlate for the transfer to complete. I am able flow by using the 'Network' tab on the activity monitor approx. unplug the 3rd-gen unit has no effect.

  Does anyone have an idea what could be the cause of the inconsistencies? I checked, and in my testing Time Machine or CrashPlan were back up.

  You have wireless off in the MBP?

  Otherwise, please turn off... even if ethernet is top of the list for the wireless connection may cause problems.

  Can you please move the ethernet cable to the Gen3 of MBP unit and see if you get the same effect.

  This seems a strange effect, so it may take a bit of track.

• stop the flow of ancient text to a new text

  I have an iphone4 and trying to stop the flow of text from previous messages, when I write a new text to a contact.

  Any help on this? Thank you.

  momthood wrote:

  I have an iphone4 and trying to stop the flow of text from previous messages , when I write a new text to a contact.

  Any help on this? Thank you.

  Please clarify - are you get over and over again old messages?

• I can't find a list of the RSS FEED so I can remove a. I import into Outlook, where I deleted the flow, but can not reload the RSS.

  When I use Explorer, there is a place that lists all the my FLOW RSS I can delete, open, etc... I can't find a similar place on FireFox.

  There is an RSS feed that I have download problems on my Outlook, and I would like to remove the workflow & recharge. (I deleted my Outlook.).

  Any suggestions on where I can find a list of my RSS FEED?

  Firefox does not have a specific list of items in RSS feed.
  
  Those who are treated like all the other favorites and are managed in the bookmarks (library) Manager.

  • Bookmarks > show all bookmarks

  IE stores each favorite as a separate folder on the hard drive and probably need a special treatment for its elements of flow, but Firefox stores the bookmarks and history in a file places.sqlite database.

  So if you have not placed the RSS all items in a folder of bookmarks or otherwise marked then them it will be difficult to locate them all.

  • https://support.Mozilla.org/KB/live+bookmarks

• HP Jet 8: 8 HP flow can't keep not fresh, takes place at 0% even when it is plugged

  My HP flow 8 tablet has never held public office.  I leave it plugged in all night and the next day it is fully charged, but the charge only lasts 2 hours at the most, even if it is plugged I use it all the time.  He goes down to 0% and turns off.  I put aside for several hours to recharge.

  I'm looking for another Tablet, but the flow 8 HP serves all my needs except that it only lasts 2 hours before going to 0% while I use it, even if it is plugged in all the time.  I really hope to solve the problem, rather than having to buy a new tablet.

  Any suggestions?

  If you hold the low volume button while powering it will enter in the BIOS boot menu, you can press F2 to run diagnostics and there is a component for the battery test.  I think you are saying that the screen turns off after that two hours than even when the charger is plugged in, it does not seem that should happen.  If you have not already, try another charger.  If you plug the USB on another computer, which will allow to load also.  You can update the BIOS if you have not already too.

• Seen the lines flow on several pages

  I have this problem in the Pages on Mac, what really bothers me.

  When I have a blank page, and I add a table and add as many lines that I wish, Pages will automatically pause at some point and the lines with continue to pour in on the next page. Just like on this picture here:

  

  Now if there is already text in front of this painting, it won't work. Instead, the ENTIRE table will go to the next page. How boring is that?

  This is what it looks like when there is text before the table:

  

  And now I add some more lines, and what is its role? It does here:

  

  Someone knows how to fix this? I want the table to stay just below the text and lines flow into the next page without all of the table on the next page. It's crazy how is complicated Pages.

  I hope that it is possible to do at all! Thank you.

  Found the solution. Or better said, to find a person on the internet.

  Select the entire document (select an empty space on the page somewhere). Go to the "Format" tab (at the top right), then the tab «More»

  Then uncheck the box "prevent window & orphan lines."

  And it works! Maybe this will help someone.