5709 7 stream: How to create a USB key to recovery for HP 7 5709 flow?

Similar Questions

• How to create a USB key with HUU for UCS

  Hello

  I have 4 UCS C220M3 requiring updates and I downloaded HUU2.0.3d - 1 for that in the ISO file

  I really want to use a USB key to start the UCS of the box before I shipthem - so there is no network can - just out of the box, boot on USB via F6 and go!

  I am Macedonia this before on code 1.5, but now with 2.0 I had all kinds of funny mistake, and I think its related to the way in which I create the USB

  So what is the best way to create a USB bootable from this Cisco's ISO image?

  I tried 3 kinds of 'decision-makers', but none can boot up and load the HUU.

  Later, I tried going to start and begin to HUU, but then just fails when loading the firmware and tools

  Please notify

  I did some research and found the defect following CSCup62091 who you might be hit.

  2.0(1a) HUU/4.0(1a) UCS USB boot error 906

  https://Tools.Cisco.com/bugsearch/bug/CSCup62091

  Let me know what you think

• How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?

  How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?

  See this - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

• How to create a validation "not null" unique for all elements in a page?

  Hello world
  
  How to create a validation "not null" unique for all elements in a page? I love textfields. Rather than create "not null" validation for each article, I would like to create a single validation control that will be used
  
  Thanks and greetings
  Umer

  Nice1 wrote:
  Bob, like u said I did the following:

  (1) less to create a button, there are 9 elements, and for each item, I put in the light of 'yes '.
  (2) under the button Delete, there is 1 point and have in light of the 'Yes' for the item
  (3) validation of the page defined for the 9 items under 'create a button' and put it to fire when 'create' button clicked
  (4) the page validation set for 1 number under 'remove' button and put it on fire when "delete" button clicked

  now, when I click on the 'create' button it shows same for the item under the "Delete" button that's a required element

  Sorry, I do not see this note. The required model will not work, there is no way to attach it to the button.

  The best solution is that the answer only a few answers to the top

  Create 2 validations page type as a PL/SQL with code

  1st validation
  
  :P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL  include all 9 items
  
  Set the When Button Pressed to the CREATE button
  
  2nd validation
  
  :P1_ITEM10 IS NOT NULL
  
  Set the When Button Pressed to the DELETE button
  

  I think that this will be the best way to do it.

  Published by: Bob37 on April 27, 2012 12:02

• How to create a foreign key constraint on a table nested column

  Dear Experts,
  I create 2 tables using the object type. the VESSEL_PARAM table contains the list of the parameters allowed.
  The table VESSEL_TYPE containe single item we list some parameters.
  
  On this table, I love the column VESSEL_PARAM table VESSEL_PARAM to check if the settings are and the reference value is allowed.
  How to create a foreign key?
  Here my script that generates this runtime error: 00904. 00000 - '% s: invalid identifier' on this line
  
  ALTER TABLE VESSEL_PARAM_TAB ADD CONSTRAINT FK_VESSEL_TYPE FOREIGN KEY (NAME, DATA_VALUE)
  REFERENCES VESSEL_PARAM (PARAM_NAME, LIST_PARAM_VALUE. DATA_VALUE)
  

  CREATE OR REPLACE TYPE OBJ_PARAM_VALUE AS OBJECT 
  ( 
    DATA_VALUE  VARCHAR2(20)
   ,DESCRIPTION VARCHAR2(125)
  ) NOT FINAL;
  /
  
  CREATE OR REPLACE TYPE LIST_PARAM_VALUE AS TABLE OF OBJ_PARAM_VALUE;
  /
  
  -- derive object subtype from object supertype
  CREATE OR REPLACE TYPE OBJ_PARAM_NAME UNDER OBJ_PARAM_VALUE (
    NAME VARCHAR2(30)
  )NOT FINAL;
  /
  
  CREATE OR REPLACE TYPE LIST_PARAM_NAME AS TABLE OF OBJ_PARAM_NAME;
  /
  
  Prompt create table VESSEL_PARAM;
  CREATE TABLE VESSEL_PARAM (
     PARAM_NAME   VARCHAR2(20) NOT NULL
    ,PARAM_DESC   VARCHAR2(125)
    ,PARAM_VALUE  LIST_PARAM_VALUE
    ,CONSTRAINT PK_VESSEL_PARAM PRIMARY KEY (PARAM_NAME)
  ) 
  NESTED TABLE PARAM_VALUE STORE AS PARAM_VALUE_TAB
  TABLESPACE CMS_ADMDATA;
  /
  ALTER TABLE PARAM_VALUE_TAB ADD CONSTRAINT UN_PARAM_VALUE_TAB UNIQUE (DATA_VALUE);
  /
  SHOW ERROR;
  
  Prompt create table CMS_ADM.VESSEL_TYPE;
  CREATE TABLE CMS_ADM.VESSEL_TYPE (
    VESSEL_TYPE  VARCHAR2(20) NOT NULL
   ,VESSEL_DESC  VARCHAR2(125)
   ,VESSEL_PARAM LIST_PARAM_NAME
   ,CONSTRAINT PK_VESSEL_TYPE PRIMARY KEY (VESSEL_TYPE)
  -- ,CONSTRAINT FK_VESSEL_TYPE FOREIGN KEY (VESSEL_PARAM) 
  --        REFERENCES VESSEL_PARAM (PARAM_NAME)
  ) 
  NESTED TABLE VESSEL_PARAM STORE AS VESSEL_PARAM_TAB
  TABLESPACE CMS_ADMDATA;
  /
  ALTER TABLE VESSEL_PARAM_TAB ADD CONSTRAINT UN_VESSEL_PARAM_TAB UNIQUE (NAME);
  ALTER TABLE VESSEL_PARAM_TAB ADD CONSTRAINT FK_VESSEL_TYPE FOREIGN KEY (NAME,DATA_VALUE) 
          REFERENCES VESSEL_PARAM (PARAM_NAME,LIST_PARAM_VALUE.DATA_VALUE)
  /
  SHOW ERROR;

  Thank you
  
  Salvatore

  Could you please indicate your answer as correct if you judge them correct.

  Best regards

  Mohamed Houri

• How to create the usb flash disk to Reboot

  How to create the reboot usb flash drive. If I want to do a recovery or restart the usb flash drive how to

  Hello

  read the google links

  and make sure that your motherboard allows you to boot from USB

  http://www.Google.com/search?hl=en&source=HP&q=how+to+make+a+USB+flash+drive+bootable&AQ=1&AQI=G3G-c1g3&aql=&OQ=how+to+make+a+USB+flash+drive

  and if you talk about the recovery partition of computer manufacturers from the D: to a bootable flash drive, you can not do

• How to create a usb bootable for IE captain?

  When I was doing the usb boot, I found articles with google, but they are all so outdated.

  Many say even using an 8G usb... which of course is not allowed now, as the required minimum is 16G.

  I use the Middle terminal to the USB.

  What is the process that is more up-to-date? And what is the code of sudo for this please?

  I tried the sudo Web site code, it turns out that say that there is no function "createinstallmedia".

  Hi Guoxuan,

  When you mention "createinstallmedia" looks like you want to create a bootable Installer for El Capitan.

  Note 'createinstallmedia' is not a function built-in, but is part of the package install, as shown in this article.

  Create an installer for OS X - Apple support bootable

  Use the "createinstallmedia" command in the Terminal

  1. Download the installer for OS X for the Mac App Store. Quit the installer if it opens automatically after downloading. The installation program will be located in your Applications folder.
  2. Mount your USB key or another volume. You can also use an internal secondary partition.
  3. Open the Terminal application, which is located in the Utilities folder of the Applications folder.
  4. Use the createinstallmedia command in a Terminal to create the bootable Installer. Examples of this command are in the next section. To get the detailed instructions for use, make sure that the app install OS X proper is in your Applications folder, then enter one of the following in a Terminal:

  Path for El Capitan:

  /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia

  Note in step 4. the appropriate installation program should be in the Applications folder before you reach it.

  The article gives a more complete example of the command.

  The following examples assume that the OS X Installer is in your Applications folder and the name of your USB key or another volume is MyVolume:

  Example for El Capitan:

  sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app

  If you are just trying to create a bootable USB key, then you just install El Capitan on this disc as usual, by selecting the USB key as a destination.

  Update of OS X El Capitan - Apple Support

  Best regards.

• Create a USB from the recovery CD recovery provided - SOLUTION

  You don't have to buy and CD/DVD external for use provided recovery CD. I guess you all have access to a computer with a CD player. Also, you can buy a 2 GB USB flash memory.

  Using any other computer with a linux or win OS - insert the CD and create the image of this CD .iso file using any application of CD/DVD writer provided. If you use Ubuntu or linux in general, you can use of Brasero CD/DVD burner. Once in the Brazier, choose Copy CD/DVD and in the drop-down menu, select image file. Brasero will create the .iso image file and save it on your hard drive in GNU as file brasero.iso.

  If you prefer to use the terminal / shell to create an iso file enter these commands:

  sudo umount/dev/cdrom

  DD if = of = file.iso / dev/cdrom

  Now we have created the image file and is sitting on the hard drive for you. Now we must create a USB bootable from this image. To do this, download Unetbootin from the link below. It is available for linux and win.

  [http://sourceforge.net/projects/unetbootin/]

  Once you have downloaded Unetbootin, you insert the USB memory (it takes 2GB). Launch Unetbootin. Now the option select the second option - iso image and browse to the location of the file on your hard drive and click Open. Below select the usb - slot Linux key something like/dev/sdb1 or/dev/sdc1 - usually it is the name of the drive selected automatically by Unetbootin.

  Click on apply or Ok. the bootable USB key will be created in a few minutes. Once it's done insert in your Toshiba NB 100 and press F12 to start the netbook, a menu option will display - select USB device and press ENTER.

  Now the machine will start and menu start Unetbootin will show - recovery SELECT, then press enter and follow the instructions - and you'll be all set. No need to spend extra money for an external CD drive.

  I tried yesterday and works like magic. Good luck.

  -----------------

  Post edited by: Admin

  * This procedure does not work correctly! *

  Please follow the instructions created and validated by the user * boandlkramer *.
  Here is the link to the site:
  http://www.georgkainzbauer.de/gtkdb/index_7_544.html

  Best regards
  Admin

  Hay Karloss

  10 points for you! If you have any tips more useful, you're welcome.
  Thank you

• How to create the cover of the app for my application

  Dear,

  Please help me with step by step tutorial how to create an appcover for my application! I'm kinda noob on C++ and I read the paper, but could not apply! (didn't know where to put the code - C++ part) not Qml

  I want to put a picture of the asset as a cover of the app

  Your prompt response is much appreciated!

  You can do with QML also.

  Follow this Code:

  import bb.cascades 1.4
  Page {
  
      attachedObjects: [
          //Active Frame is called as Scene Cover
          SceneCover {
              id: activeFrame
              content: Container {
                  //To Do Fill Me with QML
                  //fill what you want. Image, Label, much more
              }
  
          }
      ]
      Label {
          text: "Hello World"
  
      }
  // After Application is minimised or Active Framed This Function shows
  onCreationCompleted: {
      Application.setCover(activeFrame)
  }
  
  }
  

  This is how you create with QML. C++ is used for highly recommended as animative and well known to the user.

  When you love it, you can accept it as snap

• How to create new encryption key

  I am trying to create the new key to encryption Cipher /k command.

  But I have no idea, how I can use command Cipher? and is it possible to create new encryption for only particular folder and files.

  If possible, how?

  I went on the website to verify the Cipher micrsoft command, but I need to see the example of the Cipher command!

  Please help me!

  Hello

  I suggest you post your question on the appropriate section of the MSDN forum.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope this helps.

• How to create the public key to VM

  I'm new to the cloud and have seen VM public key option, can someone tell me how to create this key to go forward.

  Kind regards

  http://docs.Oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-4285B8CF-A228-4B89-9552-FE6446B5A673.htm#CSDBI3349

• How to create the column of the table for long-form Master detail relationship

  Apex 4.1

  Oracle 11g

  I created a form master detail and see the main table hotel_list and table hotel_mapping as detailed below.

  Hotel_list

  ID HOTEL_NAME

  1 Holiday Inn

  Hotel Hilton 2

  Hotel_mapping

  ID HOTEL_NAME MAPPING_NAME

  1 Inn Holiday Inn Select hotel

  2 holiday hotel Holiday Inn Select

  3 hotel Holiday Inn Holiday Inn Hotel

  4 Hilton Hotel Hilton Hotel chain

  Hotel Hilton 5 HiltonHotel

  Table Hotel_name Hotel_list is a linked table Hotel_mapping

  When I add a line to the Hotel_mapping table for the selected row in the hotel_list table, mapping_name of column is null, therefore impossible to create the relationship between the main table and the secondary table.

  I would like to know, how to create the relationship?

  Thank you very much

  Best regards

  Yong Huang,

  simple step see creating a form detailed master with APEX - Assistant Master retail

  and check how to maintain the relationship between two tables,

  simple return the packaged application «Sample of Masters details»

  and try to understand this concept...

  In your example, use Hotel_list.ID as a foreign key in the table Hotel_mapping

  and maintain the relationship with the column ID...

  and choose the display type of the column Hotel_list.ID in table Hotel_mapping as List(Query Based LOV) select.

  otherwise the best way is to create sample on oracle.apex.com

  I hope this helps...

  Leave.

• How to create a layout portrait vertical page for ipad from indesign

  Kindly support me to create this page

  

  Tell me how to create a lay out for the cover image and background text

  Looking forward to hearing from you soon,

  Thank you and best regards,
  Ajwan Arouje

  I invented myself,

  Thank you

• How to create an entry page protected password for a site of muse?

  I created a site in the Muse and the client wants that it is password protected for the moment... the usual Javascript between the head and body tags does not work.  Any ideas?

  Hello

  Please check previous password protection:

  Can I create a login/password in the Muse for a HTML5 page or two?

  http://forums.Adobe.com/message/4406164

  There are several ways you can perform password protection, but as noted Cristian, there is no native way to do this in the Muse...

  The only way to password protect Muse pages today would be to implement of the secure areas of the coast accommodation of the House. If you host on Adobe Business Catalyst is quite possible, but requires a good knowledge of all BC content management system. You can get a quick idea of what it would take to set up such a secure area in this BC knowledge base article.

  Others have succeeded with services such as AuthPro.com, JavaScript password protection, or to implement protection of password files and folders in the control panel cpanel/control of their web hosting provider. This creates the so-called "http authentication". Here is an article on how to create the .htaccess and .htpasswd files to password protect your pages or directories using basic http authentication: password protect your Pages with htaccess

  Best regards

  Corey

• Maker of SQL data - how to create the foreign key in the relationship 1 to 1?

  Hi guys...
  
  I had 2 tables...
  
  Table 1 - CFR
  -----------------------
  CFR_ID = primary key
  
  
  Table 2 - USER_PLAN
  ----------------------------
  User_id = primary key
  PLAN_ID ARGUMENT,
  CFR_ID = reference foreign key (table 1)
  
  
  Business flow go like this...
  table insdie CFR, it contains all the documents / transactions of a particular plan user. each time a new transaction occurs for a plan/user, a new CFR_ID / row will be generated.
  After that, the newly generated for the new line, CFR_ID will be updated to the CFR_ID in USER_PLAN
  
  
  Thus, there is always a 1 to 1 relationship between table 2, no matter how much CFR_ID is generated for a particular USER_PLAN. as the CFR_ID in the USEr_plan table will always be the last being produced within the table of the CFR.
  
  
  However, in the Data Modeler, I am unable to create this foreign key relationship... NO idea how create a 1 on 1 relationship of foreign key? or there is no way...
  
  
  Thank you and best regards,
  Noob

  Hey Noob,

  Yes, that's correct.

  Best regards
  Philippe