How to create a USB key with HUU for UCS

Similar Questions

• 5709 7 stream: How to create a USB key to recovery for HP 7 5709 flow?

  I bought a used HP Jet 7 5709 Signature edition and want to create a USB stick recovery before doing an Upgrade to 10 win or forced to upgrade. Can someone tell me how this can be done. I advised to buy a because it would cost more than the tablet itself and can't understand why I can't create a recovery Partition it. thanks in advance!

  Hi, you can go to the control panel => recovery.  There are also instructions here.  You already tried that and it doesn't work?
  
  You would need to an OTG adapter and a 8 GB USB key to create the recovery media.

• How can I save items on a USB key with Vista?

  original title: using Flash Drive

  How can I save items on a USB key with Vista

  Plug the Flash drive.  Go to start / computer and find your USB drive listed there.  Find what you want to record on the FlashDrive (from other units identified in Explorer) and copy / them (CTRL + C) and then go to your USB key and click it to open it and press Ctrl + V to paste the files.  That's all there is to it.  You can create folders to store files, like flash drives have limits on the number of files can be stored in the root directory (but not folders).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to create a recovery disc with all vista updates?

  original title: how to create a recovery disc with all vista updates without starting from scratch, so I can replace my hard drive?

  My hard drive seems to be dying.  I would replace the drive.  I reloaded vista from scratch with all the updates, but it took forever.  I would like to make a record of recovery with all updates.  IAM on vista Home premium.  32 bit

  If you want a good backup program that backups image, I recommend Acronis True Image 2010:http://www.acronis.com/homecomputing/products/trueimage/.  It offers a free trial, so you can test and if you want it's only about $30 for the original version.  A lot of people I know this program and use it instead of Vista even in versions of Vista that offers imagery as this program does a better job.  Of course you also need a place to put the backup (which will take a lot of space), so also consider.  The best choice would be a USB external hard drive at least as large as the readers you want to back up (not only the data on them, but the entire available disk space, so you miss when you add more information about the disks).

  You cannot use IMGBURN do - it can't do anything like that.  It must be the imagery of backup software.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• How to use a USB mouse with 8 Thinkpad?

  Hello!

  I would like to know how to use a USB mouse with 8 Thinkpad. Here in the Brazil, Lenovo does not sell any micro USB USB converters. So, I found on the market several options, but mainly focused for Android tablets and smartphones and not Windows 8.1 devices. He will work with a converter OTG? It supports this type of technology?

  Thank you!!

  You can use any cable USB OTG, it's just the cable and two connectors. I use this Setup with USB keyboard. But it is more convenient to use a Bluetooth wireless mouse.

• Where can I buy a usb key with thin cable for A500 for cell phone charger?

  Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

  The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...

• How to create a photo album with ms office?

  How to create a photo album with ms office? I tried to use picasa, but I don't know how to make an album. I also want to add a text below.

  Click on the Forums link at the top of the page and go on the forums of office to ask. But, if you can not understand Picasa, you'll probably some luck using nothing else. Consider going on the forums of Picasa and get help.

• How to create a new project with other page with the new version of Muse layouts?

  Hello
  If someone would continue to operate as before with the inadmissible Muse version... is - this posible to have both versions installed? or how to create a new project with other page with the new version of Muse layouts?
  Or how to download third party) 3 different configurations (desktop/tablet/mobile) under the same url with a clean result, like up yet with the Muse does not?

  Thanks for any help,

  Patrick

  Use the new version! What you want to achieve, will work! Go to the 'Page' menu and choose 'Add another Layout' and the missed buttons are in plan view.

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• How to create a menu manual, WITH dropdowns

  How to create a menu manual, WITH dropdowns

  You can use the "Composition" widget with these settings:

  Note: Use triggers to place your text. You can use each box to add all your links on the page in question.

  

• How to create a foreign key constraint on a table nested column

  Dear Experts,
  I create 2 tables using the object type. the VESSEL_PARAM table contains the list of the parameters allowed.
  The table VESSEL_TYPE containe single item we list some parameters.
  
  On this table, I love the column VESSEL_PARAM table VESSEL_PARAM to check if the settings are and the reference value is allowed.
  How to create a foreign key?
  Here my script that generates this runtime error: 00904. 00000 - '% s: invalid identifier' on this line
  
  ALTER TABLE VESSEL_PARAM_TAB ADD CONSTRAINT FK_VESSEL_TYPE FOREIGN KEY (NAME, DATA_VALUE)
  REFERENCES VESSEL_PARAM (PARAM_NAME, LIST_PARAM_VALUE. DATA_VALUE)
  

  CREATE OR REPLACE TYPE OBJ_PARAM_VALUE AS OBJECT 
  ( 
    DATA_VALUE  VARCHAR2(20)
   ,DESCRIPTION VARCHAR2(125)
  ) NOT FINAL;
  /
  
  CREATE OR REPLACE TYPE LIST_PARAM_VALUE AS TABLE OF OBJ_PARAM_VALUE;
  /
  
  -- derive object subtype from object supertype
  CREATE OR REPLACE TYPE OBJ_PARAM_NAME UNDER OBJ_PARAM_VALUE (
    NAME VARCHAR2(30)
  )NOT FINAL;
  /
  
  CREATE OR REPLACE TYPE LIST_PARAM_NAME AS TABLE OF OBJ_PARAM_NAME;
  /
  
  Prompt create table VESSEL_PARAM;
  CREATE TABLE VESSEL_PARAM (
     PARAM_NAME   VARCHAR2(20) NOT NULL
    ,PARAM_DESC   VARCHAR2(125)
    ,PARAM_VALUE  LIST_PARAM_VALUE
    ,CONSTRAINT PK_VESSEL_PARAM PRIMARY KEY (PARAM_NAME)
  ) 
  NESTED TABLE PARAM_VALUE STORE AS PARAM_VALUE_TAB
  TABLESPACE CMS_ADMDATA;
  /
  ALTER TABLE PARAM_VALUE_TAB ADD CONSTRAINT UN_PARAM_VALUE_TAB UNIQUE (DATA_VALUE);
  /
  SHOW ERROR;
  
  Prompt create table CMS_ADM.VESSEL_TYPE;
  CREATE TABLE CMS_ADM.VESSEL_TYPE (
    VESSEL_TYPE  VARCHAR2(20) NOT NULL
   ,VESSEL_DESC  VARCHAR2(125)
   ,VESSEL_PARAM LIST_PARAM_NAME
   ,CONSTRAINT PK_VESSEL_TYPE PRIMARY KEY (VESSEL_TYPE)
  -- ,CONSTRAINT FK_VESSEL_TYPE FOREIGN KEY (VESSEL_PARAM) 
  --        REFERENCES VESSEL_PARAM (PARAM_NAME)
  ) 
  NESTED TABLE VESSEL_PARAM STORE AS VESSEL_PARAM_TAB
  TABLESPACE CMS_ADMDATA;
  /
  ALTER TABLE VESSEL_PARAM_TAB ADD CONSTRAINT UN_VESSEL_PARAM_TAB UNIQUE (NAME);
  ALTER TABLE VESSEL_PARAM_TAB ADD CONSTRAINT FK_VESSEL_TYPE FOREIGN KEY (NAME,DATA_VALUE) 
          REFERENCES VESSEL_PARAM (PARAM_NAME,LIST_PARAM_VALUE.DATA_VALUE)
  /
  SHOW ERROR;

  Thank you
  
  Salvatore

  Could you please indicate your answer as correct if you judge them correct.

  Best regards

  Mohamed Houri

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.