57F Vista installation error code

Similar Questions

• Vista installation error code 0x80070005

  I'm trying to re - install Vista 64 bit on my laptop.  When I get to the expansion of the files I get the error code 0 x 80070005.

  Is that my hard training over?  I tried to re - start after installation, but the boot sector is gone so now I have a
  Paper weight.  Any advice?
  Thank you

  Hello

  1. do you still have the previous version of the operating system intact?
  2 do you have. which type of installation selected?
  3. What is the error message displayed when you restarted your computer?
  Method 1
  Run the CHKDSK program
  
  To run the CHKDSK (Chkdsk.exe) program, follow these steps:
   
  1. use the Windows Vista DVD to start the computer from Windows Recovery (WinRE).
  For more information on how to start the Windows recovery, refer to the Microsoft Web site at the following address:
  
  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx
  
  2. in WinRE, open a command prompt.
  To do this, follow these steps:
  a. on the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
  
  b. click on repair your computer.
  
  c. click on the Vista installation you want to repair, and then click Next.
  Note Click on load drivers only if you need to load a driver to access a hard drive.
  
  d. click on command prompt.
  3. at the command prompt, type the following command and press ENTER:
  
  CHKDSK drive: / r
  
  Note in this command, drive is the hard disk where you want to install Windows Vista.
  
  4. If Chkdsk.exe does not and does not repair errors on the hard disk where you install Windows, run Chkdsk.exe on other NTFS hard drives on the computer.
  To check the partitions that are configured on the computer, follow these steps:
  a. at the command prompt, type the following command and press ENTER:
  
  DiskPart
  b. at the DISKPART prompt, type the following command and press ENTER:
  
  Flight list
  
  Note the hard disk information that is returned.
  
  c. at the DISKPART prompt, type the following command and press ENTER:
  
  output
  d. at the command prompt, type the following command and press ENTER:
  
  output
  Method 2
  Try using a different media and check if the same question is displayed.
  Please post the results.
  I hope this helps.

• Vista installation error code 0 x 80070570

  I am trying to upgrade my computer with windows vista family premium update but I get the error message 0 x 80070570.

  I am trying to upgrade my computer with windows vista family premium update but I get the error message 0 x 80070570.

  Hey GeoGeoM

  what you're trying to upgrade

  and you meet the necessary system for vista hardware requirements

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Walter, the time zone traveller

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation error code: 0 x 80246008

  I get an Installation Error Code: 0 x 80246008 when I try to download the update for Windows-why?

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista update error code 643, 490 & 8007371B

  I'm running Vista Ultimate and months get error code 643, 490 & 8007371 B and despite the exyensive the search for solutions, I can not only solve these problems to download. It seems that the absence of these downloads are inhibiting the SP1 update.  Can anyone help?  DELBOY22

  * Title *.
  Vista update error codes

  Hello
  
  a. updates you trying to install?
  have b. you tried the troubleshooting steps?
  You can try the steps outlined in the article below and check if it helps.
  http://support.Microsoft.com/kb/958052
   
  Check also the updates fail to install in windows update history. After the same return so we can help you better.
   
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation error code 0 x 80070673

  When I try to install the updates I get this error: Installation Error Code 0 x 80070673

  Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features gradually based on .NET Framework 2.0, 3.0, 3.5 and includes the cumulative upkeep updates of .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This combined Service Pack and update applies to versions of .NET 2.0 to 3.5.

  Help, please.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the security software installed on the computer?

  Here is a link where another user was faced with the same issue and steps suggested by securityguy14 Wednesday, December 30, 2009 12:57 AM helped solve the problem.

  Link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/a3cf9c6c-5be3-4d36-91bb-ed12dc1aa720/

  You can also check the following links: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows 7 installation error code 0 x 80070017

  OK so here is my story... My computer was working very slow so I thought after two years of hardcore use, it was time to restore it and went in the menu of windows 7 on the wiped installation disc the drive clean after saving my files. Now it will not install 7 so I put XP on it to see if it would help it so I could install 7 on it, but it will not install. Your help is appreciated...

  Original title: error code 0 x 80070017 Windows 7.

  Hi Shane,

  Error 0 x 80070017 means that files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' files on the drive are modified/changed/corrupted while being copied to the location of the 'destination' on your hard drive during installation. This usually means the installation media has been corrupted or the player can not read the DVD.

  I suggest to create a USB key with the installation files and then install it. You can see the video in the article how to create a USB installation media.

  http://TechNet.Microsoft.com/en-us/video/installing-Win7-using-a-USB-stick

  You can refer to the suggestion provided by Kevin Hau on May 11, 2010 in the following link.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-installation-error-code-0x80070017/2ea19373-2b4a-47e7-8584-04c6966589c3?page=1

  Do not hesitate to contact us if the problem persists. We would be happy to help you.

• I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  Hi BobPryce,

  Please see: 2203 error when installing the Adobe Creative Suite 4 products, 5 or 5.5 or updates

  Kind regards

  Mohit

• Vista - installation update code error 57

  I am trying to install

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  and I get an error code saying 57 my attempt was a failure. What can I do to fix this?

  I am trying to install

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  and I get an error code saying 57 my attempt was a failure. What can I do to fix this?

  Here is an answer to a moderator of this forum. Date: July 19, 2009.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/58a4ce2c-d03a-4dd1-b5ba-98fbb3868585 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• New satellite does not download Vista update - error Code 80070002

  Hello

  I bought a new laptop Equium PC World of and when passed as is the norm, the operating system (Vista) try to download updates from Microsoft.
  However, I'm struggling with what he stuck after a number of successful downloads.

  Now when I go to "Windows Update", I get the error found error Code 80070002.
  Can anyone help with this?

  Why knows what the problem is here.
  Try to roll back OS to an earlier time using System Restore tool and try again. To be honest, you must disable automatic updates and prior to the update, you should check the list of available updates and install the correct updates that can be useful. That means installation Important or recommended updates. All the optional updates as some driver updates, you must disable.

• Uunable update of Windows Vista. Error code 80070005

  I'm unable to update Windows Vista SP1 to SP2, I get the error code 80070005. ERROR_ACCESS_DENIED.

  Help, please...

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2011 - Update Services

• Vista - several error codes (cannot install updates)

  Hello

  I get these error codes when you try to update windows: 80070490, 80070643, 8024200d and 8007371B. I'm using windows vista (32 bit) I just bought a fresh new hardrive and installed a copy of windows on it any help would be greatly appreciated thanks

  Lugos,

  0 x 80070490 - ERROR_NOT_FOUND

  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  Ignore the title: Some Windows Vista functions may not work, or Windows Vista may stop responding

  http://support.Microsoft.com/kb/929833

  You can watch the following article to see if this will help with the error80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Error 0x8024200D has a description of: SUS_E_UH_NEEDANOTHERDOWNLOAD.

  This would imply that all of the files needed for the installation of SP1 is not downloaded to your computer. You use Windows Update to install SP1? If so, you can try to download the full SP1 Installer and it runs locally instead.

  Here is a link to setup of five language standalone SP1 for Vista:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en>

  It's 450 + MB, so I hope that you have a cable or DSL connection!

  Also have a look here

  How to troubleshoot Windows Vista and Windows Server 2008service pack installation issues

  http://support.Microsoft.com/kb/947366

  0 x 80070002 system cannot find the specified file. http://support.Microsoft.com/kb/947821

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

  Hope the helps of information.

• Update Vista 80004002 error code

  Internet explorrer 8 do not work properly. Ireseive a windows update error code 80004002.

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Have you recently had the opportunity to do a Windows repair install? If so, what problems you see that you have thought about a repair installation maybe solve?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed IE8?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: "0 x 80004002":
  http://support.Microsoft.com/kb/956708

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft