5W, 10w and 12w PC load

Similar Questions

• Updated my iPhone6 to ios10 and now my battery heats up and does not load

  Updated my iPhone6 to ios10 and now my battery heats up and does not load

  I have never experienced this with another iPhone or iOS version

  Of course, it's a problem because I use my phone all day

  What troubleshooting steps have been taken so far?

  Have you completed a reboot, reset or restore such as recommended by Apple?

  Best,

  GDG

• My charger Apple Watch emits a ticking sound and does not load?

  The round magnetic disc at the end of my charging cable is a "ticking" or clicking sound which seems to be the rhythm of a clock. He has recently begun and did not charge the watch. I tried to connect the cable to the USB port on the MacBook Pro rather than on the wall, but still, he clicks on and does not load. Is my favorite charger?

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in one goal of your Apple Watch and cable magnetic charge verified and, if recommended by Apple, repaired / replaced (whether under warranty, if it qualifies, or via the chargeable repair service):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com

• When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

  When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

  The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

  You can check the setting of the homepage:

  • Tools > Options > general > startup: Homepage

  Firefox supports several home pages separated by ' |' symbol (pipe).

  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• An error message indicates that subject: chrome is an invalid URL and cannot be loaded.

  I tried to enter: chrome to make some changes, but I received an error message stating "the URL is not valid and cannot be loaded. I have not tried to do for several weeks, since I was first Firefox 11. I tried with all my extensions running, and he wouldn't let me. I tried with Firefox in safe mode, and it wouldn't even let me.

  The subject: chrome feature was turned off? And if so, how I turn it back on?

  Too bad. I found my problem. It was "subject: config", instead of "subject: chrome. Wow, I feel like a fool.

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• IPhone 5 s having trouble of load and keep a load.

  I have an iphone 5s that have load and maintain a load. The phone has been supported very well, just drain very quickly (a few hours from 100 to nothing, even when the phone was not in use). It has been like that for a while, but now he began to have trouble loading. If I plug it, it takes a long time (30 min) to go the red icon to turn it on, once it turns on the charge phone is about 7% and comes up with an error message that the cable is not supported (ive tried different cables, the range of original apple cables), from here it drains just at 0% in 15 minutes. Any thoughts?

  Here is what I tried:

  First replaced the battery (strong battery of my 5 c that holds a good charge)

  Restarts and factory reset

  loading port (nothing there) cleaning

  updated to the latest version of the software at the time (8.4.1)

  I'm experienced with iphones and I'm comfortable, replacement parts if needed, at this point, the phone won't stay long enough to do a lot of DIY software, or any discount to itunes. Any ideas would be great!

  Sorry, but I am afraid that we cannot help you here. According to Apple, the users are not supposed to open and their services devices. The only place where you can get help would be 3rd part repair facilities who could diagnose your device, or other forums like this, for example.

  As you open your device, Apple or an Apple authorized Service provider no longer not a maintenance operation.

• Satellite A200-10W and 64-bit support

  Hello

  I bought a Satellite A200-10W and I replaced the 1 GB of RAM with 2 x 2 GB RAM cards, but I don't see a 3.07 GB of RAM. This means that the processor architecture is 32-bit, and he cannot use a 64 bit OS or what?

  Please notify.

  Thank you

  Hello

  I think that the answer to your question, you can find in this document http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  Good bye

• Software update checking on iPad 2 and it keeps loading all day

  Check the software updates on the ipad2 and he kept loading. I tried hours and in the afternoon and still loading. All applications are closed.  How can I fix it?

  Heavenly salvation, if you try this live update, try to update via iTunes instead. Simply connect your iPad to your PC or Mac, open iTunes and select your iPad on the upper left corner. An update window should appear but if not on the Summary window that opens click on update.

  Before you do the above, I also propose the following, a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything. Then sign out of the iTunes Store and reconnect.

• I try to play a game online game and when it loads it says that the firewall is bloacking it helped me

  I try to play a game online game and when it loads it says that the firewall is bloacking it helped me

  Hello
  You can turn your firewall on and outside:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  hope this helps,
  B Eddie

• Windows did not accept the new updates and now still load with black screen and mouse rather than launch windows LOGIN

  
  

  Ideas: Troubleshooting/System Restore/Driver Updates

  • Troubleshooting took an installation point so-called drivers but never completed
  • System Restore worked initially but has now got to a point where he restores to where it will be updated and currently not load new windows
  • Recently replaced the hard drive in this laptop with a new copy of windows 7. Corresponding model
  • The only thing I have not tried is reinstalled, but then even if I did that would stop this from happening?

  ,

   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 3.
  Step A.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
  
   
  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Media player lost all music (but not music videos) and does not load the files in

  Player was working fine, then night emptied all music files and now will load all of the files, but will play them if you transfer to an unsavable playlist

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that Windows media player has lost all the music. I will try to help you with this question.

  Try these methods and check whether it is resolved:

  Method 1:

  Check the settings of the library in windows media player. Steps to follow:

  i. open Windows media player

  II. click on organize

  III. Select Options, select the Library tab

  IV. in the title of the newsletters of automatic support for files

  v. Select only adds the missing information

  Method 2:

  Rebuild the media database and check if that helps. Follow these steps to rebuild the database:

  i. Click Start, in the search box, type in %LOCALAPPDATA%\Microsoft\Media Player

  II. remove the Media player folder

  III. to restart the computer, the Media player folder will be automatically recreated. Check whether the problem is resolved.

  This problem occurs because the Windows Media Player library database is corrupted.

  Method 3: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• I understood the problem, but don't know how to fix it. It is said to run dxdiag because of the direct 3D, so I run dxdiag and it finishes loading, I test direct 3D and it works very well...

  I understood the problem, but don't know how to fix it. It is said to run dxdiag because direct 3D, so i run dxdiag and it finishes loading, I test direct 3D and it works fine, so I re-run halo, but then it still doesn't work. so I went online for patches, but when I downloaded a patch for windows 7, but I have windows xp. so I go back to the internet and search for patches for windows xp, but there is no result. so I thought change to windowed mode halo would work but it dident work when I ran halo 3rd becose my color depth is low, I have 24-bit color quality, but I don't know how to change, so I look for a way to change this for months and no results.so to microsoft answers site please help me because I have nothing else in my mind to the difficulty of halo

  I have:
  (1.halo of the trial
  (custom edition 2.halo (full)
  Halo is ever going to work on my computer
  because he never did
  I play with my cousins that I visit about 3 times a year

  Hello

  I suggest you go through the link.

  Minimum system requirements for Halo: Combat Evolved
  http://support.Microsoft.com/kb/829479

  Please check if the computer meets the minimum system requirements to play HALO game
   
  You can also refer to:
  http://support.Microsoft.com/kb/829478

• Clean boot let B1-710 acer operating system and applications pre-loaded on Tablet?

  Tablet Acer leave B1-710 boot operating system and applications pre-loaded on tablet. It erases only my information and apps that I put on the tablet.

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29892/~/Acer-Iconia-B1-A71-and-B1-710-factory-d...

  a factory data reset will return the tablet to factory default with the last OS update; so plant apps only, all your data and applications will be deleted.

• When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

  I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

  Discussions were merged.

  Deleted duplicate.

  Original title: failure of the Dll

  The error seems to be a common problem with Dell laptops:

  http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

  It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

  Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

  http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers