6 creation of PowerPoint - Captivate flicker problem

Similar Questions

• Image in Captivate 6 problem

  Allows us to create software simulations, Captivate (which include screenshots, mouse movement, click on the squares and sometimes audio). After moving to Captivate 6, we had much wrong with how the slides and background images appear when the course is presented in preview and published. For example, the background of slide 4 pieces appear on blades, 17, 21, 31 and 38. Didn't check the timeline, no additional objects are included. Control the timing of the background on each slide, it turns to rest a single slide.

  Everyone knows about this problem? Does anyone know of a fix for this?

  Thank you

  Mary

  Note: The project has been on my drive C all the time that I worked on it.

  Post edited by: Mary

  Hi Mary,

  Can you check if there is a powerpoint presentation used in this project?

  You can share a screenshot?

  Also, you can go - Edit - preferences - SWF size and quality - Custom - uncheck - Advanced project Compression and compress the SWF and republish your project.

  Check the results and try to compare browsers swicth.

  Thank you

  Anjaneai

• Z5 camera flicker problem

  I noticed an intermittent random black line, touching the problem with the camera of my Z5... it happened only twice so far and remains alone on the screen for about 10 secons when the camera is first loaded up (not whenever).

  Flick essentially the black lines appear on the screen and also appear in the video / pictures, but as I say it has happened only twice so far and hard on the first 10 seconds the unit is open.

  Example of the photo: https://photos.google.com/share/AF1QipMIR00Rj8wyjMwyGSH0KwpqFYD3GDlfe3yM8EQMGYpmHdKVr4VGl7yTMTNZ_N4g...

  For an example, I just took this picture and you can see the black lines that appear on the screen. The problem does not stop within 10 seconds approximately and I could take photos without flicker, but it was just a strange thing to appear.

  I have an SD card in the phone, but the pictures are being saved internal campaigns of phones.

  I tried to take the picture with superio auto and manual swap... and initially perssited flicker in both modes.

  Has anyone came across this issue before? Or know what I need todo remedy?

  Fluorescent lighting causes this as led lighting.
  It is the effect of measuring the light pulsed through the tubes instead of solid light as incandescent.
  Reduce so I and the measured value to a different mode to eliminate it.

• Monitor flicker problem.

  I have a Sony Bravia KDL - 20 S 2030 LCD TV. I bought a TV big screen and yesterday I connected my Dell Inspiron PC to pc of the Bravia input. I couldn't play an old game Novalogic Black Hawk Down as it crashed, but I could play games like Left 4 dead 2 - on steam.

  Today, when I switched the PC on the screen is flashing no stop makes terrible to use.
  I've updated the driver on my ATI 4670 graphics card and I changed the 60 Hz refresh settings, that's all I did yesterday by the way and changed the resolution of 1024 x 768. I also get the "out of range message" when I start.
  I tried my xbox360 and the monitor works fine with the HDMI connection.
  As a result, the monitor is not defective and as Device Manager shows no problems and I clearly updated driver that is Vista to blame - again.

  Can someone at Microsoft advise me please how to fix this?

  Thank you
  comiekor

  Hello

  This can happen if the data cable connection of the monitor to the computer is defective. I had faced the same problem with my monitor that I solved it by changing the data cable. Also the monitor is not responding when you light a fire in your room/house? It flashes when you connect an external hard drive? Or move files from external hard drive?

  A flickering monitor can contribute to eyestrain and headaches. You can reduce or eliminate flicker by increasing the refresh rate of the screen. At least 75 hertz refresh rate produces generally less flicker.

  1. open display settings by clicking on the button start the picture of the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.

  2. click on advanced settings.

  3. click the monitor tab, click a new refresh rate. The monitor will take a moment to adjust. If you want to keep the changes, click on apply. If you don't apply the changes within fifteen seconds, the refresh rate will revert to your original setting.

  Flicker of the correct monitor (refresh rate)
  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Concerning
  Anthony.

• Necessary for Pavilion DV7t-7000 BIOS update support MRC 1.5.0.0 (external monitor flicker problem)

  I just bought an edition four HP PAVILION DV7-7000 with the graphics of 650 m hd4000/nvidia intel

  combination. I'm running Windows 7 x 64 with 16 GB of RAM of the system.

  I had some serious screen from flicker of my external monitor from the day I bought the laptop. I did some testing and found that the problem occurred while the screen resolution to 1920 x 1200 x 32. Any lower resolution or bit depth could reduce or eliminate the problem of flicker.

  I did some research on the web and found this:

  ------------------

  107 re: 4000 Intel HD Graphics (i7 - 3770 K) sometimes flicker

  Robert_U 25 Sep 2012 09:34 (in response to Frojo)
  Hi all

  This problem is a BIOS problem more precisely with the memory reference Code (MRC) version 1.4.0.0 or more. Contact the manufacturer of your system or the card mother for an update system for your system BIOS or the motherboard that includes the MRC 1.5.0.0 or newer.
  If you have a system with 2 or more memory modules and are comfortable with the removal of all but one of them so that your memory is in single channel mode, try and remove all but one of them and the problem will disappear. This can be used as a workaround until you are able to update your BIOS from the manufacturer of your system or motherboard that includes the MRC 1.5.0.0 or newer.
  -------------------------

  Is this thread by forum on the website of intel:
  http://communities.Intel.com/thread/30096?start=105&TSTART=0

  I think that's the question that I am experiencing. I checked it by deleting memory modules and solve the problem itself.

  Does anyone know where we can expect an update of the bios? I really want to reinstall my second memory stick and retrieve my additional 8 GB.

  You have the original sticks that came with your laptop?

• Win Media player flicker problem of video playback in Win 8

  When I use XVID as my encoder with programs like CAMSTUDIO screenshots, on a machine with Win XP or Win 7 x 64, the video return correctly from Win media player or VLC.
   

  However, when I perform the same operations on my laptop Win 8, I am twinkle video during playback with Win Media player but VLC rereads flicker.

  I think that something is altered in WIn 8.  There is no problem with reading in a virtual machine VMware 8 Win.

  I tried to go to Windows features to reset Win media Player, no change in the results.

  attached are links to the videos:

  https://www.dropbox.com/s/96vuioetpi7gm7w/recorded%20on%20Win%208.avi?DL=0

  https://www.dropbox.com/s/qdx4w4e5xq4f7yn/recorded%20on%20Win%20XP.avi?DL=0

  Thank you

  Hi Ron,

  I apologize for the late response.

  What is the brand and model of the computer?

  I suggest that you download from the website of the manufacturer of the computer display driver and install it in the computer.

  If the display driver for Windows 8 is not released by the manufacturer, and then install the latest version of the driver in compatibility mode and check.

  Make the programs more compatible with this version of Windows

  Let us know the status of the issue.

• Adobe Captivate 9 problem of software Simulation with high density in Windows 10 display

  Running: Adobe Captivate 9 x 64

  In: Windows 10

  I only have a connection (me) which I assume is the same as the administrator I do not have any who else installed on this computer.

  When I click New-> 'Software of Simulation'-> 'create', I get a warning box stating 'Capture is denied because the high-density display has been detected. Please set 'DpiAwareness = 1' in AdobeCaptivate.ini and restart the application. »

  

  I went to drive Local (c)-> Program Files-> Adobe-> Adobe Captivate 9 x 64 and found the AdobeCaptivate.ini file and double click to open it.

  It opened in Notepad.

  I found the line "DpiAwareness = 0" as the fourth row from the bottom.

  I changed the value 0 to 1.

  

  I went to the file-> save

  Notepad no did me not the option to save a .ini file. It lists only the .txt option and will not let me save to this file type.

  I tried to save as "All Files".

  "Access denied" appears on my screen and won't let me save.

  

  I can't save the file .ini for Captivate doesn't let me do this record ability of the screen. How can I fix it? Registration form is the #1 reason why I have this software. I don't have this problem before moving on to Windows 10. Also, is there a way to make suggestions to Adobe to enable this capability in a software update/fixes? Thank you!

  Hello

  I just edited the ini file on my Surface Pro 4, also running on Win10. You need administrator rights! It was my workflow:

  1. Find the ini file and copy it to somewhere else (I used the desktop computer)
  2. Rename the old file ini (for backup reasons) to AdobeCaptivateOld.ini
  3. Open the copy in Notepad, under the direction of this line and registered (will keep automatically extending ini).
  4. Moved the copy to the Captivate installation folder
  5. Started to Captivate

  You probably want to change the display of the monitor settings, so if you go to work in Captivate.

• Captivate Audio problem

  I don't hear the audio of my lesson of Captivate when played back on mobile devices. There is also an entertaining play, at the center of the slide button. Is there a way to delete it. I used a non-responsive model and published it as a SWF and HTML.

  Hello

  Please try to follow the procedure in order to diagnose the problem you were experiencing - below

  1 - update 8 to 8.0.1 Captivate by starting Captivate and go to the Help menu > updates or can also download it from the link - https://www.adobe.com/support/captivate/downloads.html

  2. after and then publish HTML5 zip out of Captivate 8.0.1 (Quiz reporting enabled) and upload it to https://cloud.scorm.com/sc/guest/SignInForm

  3 - If you do not have an account, then click Sign up now and create your account.

  4 - once downloaded course then launch a course and test it on office/computer laptop and also try to access the same course on your Android mobile devices you use and see if it works.

  Kind regards
  Ajit

• The trial of Captivate installation problem

  When trying to install my trial version of Captive by mouse clicking on Capivate_7_x64_LS21.exe, I received the message:

  
  

  "Archive part of Adobe Captivate 7 (64-bit) file is missing."

  You need all parts in the same folder in order to extract Adobe Captivate 7 (64-bit).  You can download all the parts.

  I have the following files in the folder I created this PC > Documents > AdobeCaptivateTrialDownLoad

  Adobe_eLearning_Asset_LS21.exe

  Captivate_7_x64_LS21.exe Captivate_8_Voices_x64.zip

  Captivate_8_x64. LS21.exe

  I had no problem when I launched Adobe_eLearning_LS21.exe.  That seemed to work.  I stored the file resulting folder structure Adobe active eLearning on my desk.

  Hello

  In order to download 7 Captivate, you need to download two files (.7z and .exe) at the same place / folder. Once the two files download and then run the .exe file and it will extract first .7z file and then run the installation of 7 Captivate program.

  Adobe_eLearning_Asset_LS21.exe file is downloaded the characters you can use in your project to create the content of learning at large research.

  Captivate_7_x64_LS21.exe Captivate_8_Voices_x64.zip file is downloaded Neospeech voices that you can use to generate audio using the word agents in your course.

  You can chat with an expert by clicking on the following link and help you download / install Captivate 7: -.

  Contact the customer service

  Kind regards

  Ajit

• 7 Captivate download problems

  All the links I've provided do not work and I am unable to download capture 7.  Please give me a link where I can download this program I have a code that was provided by my school and need to download this program.

  Links that do not work I have received.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=Captivate

  http://prodesigntools.com/Adobe-Captivate-7-free-trial-direct-download-links.html

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=Captivate & loc = en_US & promoid = DJDUL

  These links work, but you must follow the directions.  That is to say, read the last sentence, if you have a problem.
  

  
  

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Captivate 5: problems with Scripts Java - try to jump to a certain slides on different projects

  I have the code here I did searches for Captivate 5 access certain slide in a different project, this code has attempted to use in projects separately and simultaneously:

  function GetSlideParam() {}
  If (Window.Location.href.IndexOf('?) Slide =')! = -1) {}
  startIndex var = window.location.href.indexOf ('? = slide') + 7;
  var URL = window.location.href.toString ();
  var slideNumber = URL.substring (startIndex);
  
  If (slideNumber! = "| slideNumber! = undefined) {}
  setTimeout (function () {NavigateToSlide (slideNumber)}; 200);
  }

  }
  }

  function NavigateToSlide (requestedSlide) {}
  cpObj = document var. Captivate;
  cpObj.cpEISetValue ('cpCmndGotoSlide', requestedSlide - 1);
  cpObj.cpEISetValue('rdcmndResume',1);
  }

  GetSlideParam();

  Here is my file of URL success on in the properties of the button that was required to access some slides according to my research:

  (my project to move to) .htm? slide = 2

  Ultimately, he did not and just jump to slide 1 on the other project, no matter what I tried to do it or how I modified the script and properties button and drag the project... Help, please... Just thought that maybe you guys would know some scripts, it's why I ask you guys that no matter whether it's a Captivate because specialists Captivate couldn't answer my question being clueless on the script of this part.

  There is no 'secret code '. All is in your NavigateToSlide service management, and apply some logic. (The Javascript logic, to be precise.)

  The class variable is of type "string" , and I am 100% sure of this because you use the function 'substring' to create his argument. I know that because "substring" will always return a string, even when you give him a Boolean or integer (in these cases, it will return an empty string, but it is always a string - a little as the number 0 may represent "nothing at all", but it is always a number).

  Look in the NaviatgeToSLide function. What happens when you subtract 1 from one channel? ... UH. It depends on the language, really. Most of the languages report it as an error, but Javascript does not work (for a variety of reasons - if this bothers you, use Google to find out why).

  Now, assuming that the variable 'requestedSlide' contains a valid slide number and it is stored as a string, how you converting cela a real number? Using a pretty basic Javascript function, in fact:

  cpObj.cpEISetValue('cpCmndGotoSlide',parseInt(requestedSlide) - 1);
  

  Needless to say that I'm not 100% sure that this will fix the problem, because I can not test your code using InDesign.

• SwishMax2 SWF in Captivate: _droptarget problems - PLS HELP

  I have a drag & drop SwishMax2 app that works well in Flash Player. He checks where you drop a clip (using this ._droptarget) and something inspiring where you drop.
  
  Running the version standalone SWF gives me the correct "dropzone" in slash notation: / truthsZone/truthsZone or/liesZone/liesZone.
  
  When I import the SWF file in Captivate 3, drop the clip and debug the value of sound "this ._droptarget", it always returns "/ contentShade_mc" as the string value, no matter where I drop.
  
  Does anyone have an idea why this is happening? Captivate is somehow interfere with the _droptarget value? Has anyone out there swf imported with drag & drop code in Captivate 3 and had similar problems?
  
  Thank you! Fred

  Solved the problem.

  Dome digging and it seems that _droptarget always returns all what it hits, from the main time (more high depth) - which is the clip of Captivate in this case. Used the method hitTest() instead, and it works fine now.

  THX - Fred

• Internet Explorer + captivate 3 = problems

  Hello
  
  Sorry if this question has already been answered elsewhere in the forums. I have 3 Captivate and have done several projects captivate importantly screenshots. I've created an animation .swf into Flash, which has exported and imported some excitement in my captivate project on screenshots (it's an arrow pointing to a program). I finished my captivate project, published and put online.
  
  When you view the project in Firefox 5.0, all right.
  
  When you view the project in Internet Explorer 7.0, all right, except that the arrows are not displayed. .Swf animations do not appear.
  
  I think I did all right - the fact that Firefox displays animations mean that the captivate project is not having trouble finding the .swfs.
  
  Any suggestions? Thank you!
  
  
  
  * Edit: I actually found what the problem was. I had made changes and reloaded the page in IE but not clear cache and he was remembering the earlier versions. Thanks anyway!

  Hello

  Sorry if this question has already been answered elsewhere in the forums. I have 3 Captivate and have done several projects captivate importantly screenshots. I've created an animation .swf into Flash, which has exported and imported some excitement in my captivate project on screenshots (it's an arrow pointing to a program). I finished my captivate project, published and put online.

  When you view the project in Firefox 5.0, all right.

  When you view the project in Internet Explorer 7.0, all right, except that the arrows are not displayed. .Swf animations do not appear.

  I think I did all right - the fact that Firefox displays animations mean that the captivate project is not having trouble finding the .swfs.

  Any suggestions? Thank you!

  * Edit: I actually found what the problem was. I had made changes and reloaded the page in IE but not clear cache and he was remembering the earlier versions. Thanks anyway!

• Performance - Captivate 2 problems

  Since I installed Captivate 2, I've known severe performance on my laptop problem. A video captured with the first version of Captivate (approximately 75 slides), when opened in Captivate 2, limited my ability to changes. I can perform changes on the first 20 - or so slides... IE - resize highlight boxes, change in length of strike etc... After the slide 20' th, I can no longer make these changes. It's as if the system is at maximum. I am obliged to break the video into separate files, not more than 20 slides each to continue with the installation. At the end that I can copy and past these slides back into a single file for editing. Someone at - it experieince that? You can provide any help would be greatly appreciated. Thanks in advance for your help.

  I solved this problem by upgrading to the RAM on my computer. Thank you for all your help.

• Captivate 9: Problems of effect in playback mode

  Hello

  I use 9 Captivate and create animations by using the effects of out-of-the-box from Captivate itself. However, when I go to get an overview of the module (e.g. "Next 5 slides") whenever my effects different or all simply do not at all show. Then I when to publish this module to see if it affects the output, and the same thing was going on.

  Only preview mode which seems to work (90% of the time) has been spotted in "HTML5 in the browser? Any ideas why the previews are all showing different things? The effects should all work in HTML5 and SWF.

  Thank you!

  Hello Hannah,

  Can you please try to use the fix 9 Captivate?

  Please visit: https://helpx.adobe.com/captivate/kb/hot-fix-captivate-9.html

  Thank you

  MohanA Das

  Adobe Captivate Engineering Team