60 GB tied up in CSC files clean using 942974 KB by fixit or make myself

Similar Questions

• Clean disc, under temporary internet files, I use to be able to see the images displayed with thumbnails

  Disc clean, under temporary internet files, I use to be able to see the pictures seen with photos, either, can anyone tell me what happened and if I change it back?  Thank you, Patti

  Hello

  Visit this link and check that it might help:

  http://support.Microsoft.com/kb/310312

  http://support.Microsoft.com/kb/315246

  It will be useful.

• Hibernation File Cleaner

  I do my cleaning disc and noticed "Hibernation File Cleaner" East of 1.98 GB. I erase or not? There is a lot of memory, but Windows comment advises not to erase if you use put into hibernation. If I delete, I have to go through a major adjustment to settings to reinstall the hibernation option. What should do?

  Hello cbn123,

  Thanks for posting your question on the Microsoft Answers forum.

  To resolve this issue, re-enable the hibernation. To do this, follow these steps:

  1.	Click on launch , click on all programs and then click on Accessories.
  2.	Right-click prompt command and then click on run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  3.	At the command prompt in the administrator: command prompt window, type powercfg - h.

  Please see the following article:
  KB929846 - you can't put the computer into hibernation after you run the Disk Cleanup Wizard in Windows Vista Business

  http://support.Microsoft.com/kb/929846

  I hope this helps.
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Looking for files cleaning software, any recommendations?

  Looking for files cleaning software, any recommendations?

  I use and like DiskMax by www.KoshyJohn.com, it works well and is well worth the donation.

• CSC file is not valid in Encore CS5

  I got files CSC with a company of the legend and the files related to the chronology, following the instructions yet, but when I saw or burn a disc, the process begins with a "closed captioning file is invalid. Anyone know if there are specific settings that the CSC file must be a reminder so that it is valid?

  Today came to answer the question again of compatiable CSC file. Turns out that in order for recall to recognize a CSC file there must be a header at the top of the page of the CSC file. In my case the header should look like this: Scenarist_SCC V1.0 once this header has been added to all the files of the CSC, still recognizes the files and the burn completed as it should and all the legend information has been correctly on the disk. CSC files can be read in Wordpad.

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• message: 0X80071A90 of the file in use by another program. When I try to back up to an external drive

  I get an error message saying that the 0X80071A90 file is used by another program when trying to make a backup using windows backup installation, anyone got any idea how to get around this please.

  Hello Chris,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, by making a backup of Windows. In the meantime, please try to follow the following suggestions to solve the problem.

  You can try putting your computer clean boot state, and then try to perform a backup and see if that helps. Follow the link below to get you computer in a clean boot state, because your system in a clean boot state allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  If that doesn't help then try to find the bad sectors on the hard disk and then perform a backup, see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right click on cmd and click run as administrator

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to save and check the result.

  Visit this link for more information on "check a drive for errors":

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How to use the del command or any other to ignore files that it cannot remove (files in use) and continue to delete other files in a folder?

  I want to do a batch tha clean windows Temp folder. For this, I tried the del command, but the problem is to stop the deletion of files when it cannot remove a file in use. I want that he skip this file and continue to delete the other files too. I hope you guessed it. Please help me.

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the MSDN Community.
  http://social.msdn.Microsoft.com/forums/en-us/categories

• Svchost.exe file LocalSystemNetworkRestricted using too much RAM

  The file svchost.exe (LocalSystemNetworkRestricted) uses too much RAM, almost 1/2 of it.  There are also several svchost.exe files (no limit) and the indexer uses a lot of RAM too. I have already associated the indexer return. I suspect that it is the cause of my favorite right-click with windows Explorer.  I have 4 GB of RAM, small basic programs, file clean constantly and the computer is still slow.  How can I fix it?  Test/scan etc. ?  HELP.............................

  2computercrazy

  Hello

  Follow the steps below and check if that helps.

  Method: Scan the System File Checker.

  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you to check the boot issue.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  Method 3:Follow the steps below to solve the problem

   1. click on start-> in start search, type "services.msc" (without the quotation marks) in the Open box and click OK.
  2. double-click on the service "Windows Update".
  3. click on the tab to open a session, please make sure that the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

  4. check if this function has been activated on the hardware profile listed. If this isn't the case, please click the Enable button to enable it.
  5. click on the "Général" tab Make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Status of Service" to start the service.
  6. repeat the above steps with the other service: (BITS) Background Intelligent Transfer Service

  Method 4: I suggest that you want to run a virus scan on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I suggest you to provide us with the information from the event log.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

• Hello. I recently got a new computer and transfer all my files across using Time Machine. Whenever I try to connect to any CC (including CC) program, the program stops immediately and an Apple error happens. I uninstalled and reinstalled CC

  Hello. I recently got a new computer and transfer all my files across using Time Machine. Whenever I try to connect to any CC (including CC) program, the program stops immediately and an Apple error happens. I have uninstalled and reinstalled CC twice with no result and removed all Adobe products on my computer and nothing works.

  I've seen similar discussions before... transfer does not work, you must install

  Discussions of re - install

  -http://forums.adobe.com/thread/1408331?tstart=0

  -http://forums.adobe.com/thread/1398961?tstart=0

  - and http://helpx.adobe.com/creative-cloud/help/install-apps.html

  -using the vacuum after you have uninstalled and before reinstalling will usually help

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• 33 Firefox does not display a pdf file when using the response object

  33.0.2 Firefox does not display pdf files by using the code below in an asp.net program, that works for the previous versions of Firefox and also works with IE. I'm using the built-in pdf viewer. All my plugins are disabled.

             Dim strPDF As String
             strPDF = Session("filname")   'pdf filename
  

             Response.Clear()
             Response.ClearHeaders()
             Response.Buffer = True
             Response.ContentType = "application/pdf"
             Response.CacheControl = "Private"
             Response.AddHeader("Pragma", "no-cache")
             Response.AddHeader("Expires", "0")
             Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
             Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
             Response.WriteFile(strPDF)
  

             Response.Flush()
             Response.Close()
             Response.Clear()
             Response.End()
             Session("filname") = ""
  

  What is the result of this code that Firefox receives through the headers of HTTP response if you check that the Live Http Headers extension?

  • https://addons.Mozilla.org/firefox/addon/Live-HTTP-headers/

• Cannot open the file "File" is used by OS x and cannot be opened

  After upgrading to El Capitan, files in my disk NTFS external HARD dimmed and are unavailable.

  After you copy the file into my macbook, it keeps prompting 'File' is used by OS x and cannot be opened.

  Help, please.

  Please, back up all data before proceeding.

  Select the text on the bottom line by dragging on it. Do not include white space at the end of the line. The text should be highlighted.

  xattr -d com.apple.FinderInfo

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V, then press the space bar.

  Now switch to the Finder and select the items in question. Drag into the Terminal window. More text will be added to what you entered.

  Click in the Terminal window to activate it, and then press return.

  Wait for a new line ending with a dollar sign ($) to appear. You can then quit Terminal. Test.

• Current file to use when it is disconnected from the network wireless/wired - shared network drive

  Hello

  We have a problem where we receive a "file in use" message when you are disconnected from the network. To reproduce the problem, what we do is:

  (1) connect to the wired network wireless disabled with

  (2) create a test document

  (3) to enter text and save on network share

  (4) remove the network cable

  (5) add additional text

  (6) reconnect the network cable

  (7) try to save the file to the network share

  At the beginning by clicking the X is the new message you want to save. Click Yes and the message arrives until the next time you hit the Hit of X no. and he loses the last change.

  From here we then go up to the network share, open the file and it comes up with "file in use. Open read-only. File is opened by us (Administrator account), and there is NO temporary file in the shared folder.

  Tried so far:

  -Run net config server/autodisconnect:-1 for trying to stop it disconnect the share

  -Checked pane, pane preview and off 'display the description of the pop-up window for folder and desktop items '.

  -Windows Update

  We try to reproduce on wired connection, because it is easier to reproduce that disconnects wireless. Seems to have an impact on several operating systems. Share folder is shared on a Windows 2008 R2 x 64 machine.

  Is this a known problem or is there something that we can configure to try to prevent the locking file after logging out? Ideally, we want the decline to go unnoticed and provide uninterrupted service to the user, unless they are trying to save during the fall.

  Thanks in advance for comments :)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Icons and links do not work, they all say .encre and get an error "to open this file, windows needs to know which file was used to create".

  I uninstalled a program a few days ago and I think that it uninstalled the things I needed. All my icons tell .lnk and a message appears that says "to open this file, windows needs to know which file was used to create it.  I can't access my add or remove program file.

  I can't delete email, a lot about different programs does not work when I click on them with my mouse.  I have windows 2005.  My PC is in good condition with a lot of memory left and I have antivirus protection.  Help?

  Hello

  I suggest following the link below and follow the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-file-associationunable-to-load-eg-vlcink/d14b86ae-b02f-40fd-bf3f-5bf7922f5542

  I hope that the above information is useful!

• build a Visual Studio C++ 2008 .dll file and use it in labview

  Hello

  A few days I tried to create a .dll with c code file and use it with a call library function node in LabView. But I could never do it with success. I use Visual Studio 2008 and labview 8.6.

  I had a look at some tutorials, but they were written for different versions of Visual Studio. And because I'm a newbie to Visual Studio, it was difficult for me to do in another version the turtrial is written for.  However, I have a lot of experience in programming c for processor atmel (AVR Studio).

  Is there someone who could help me step by step hollow Visual Studio C++ 2008 and later versions also help me configure my call library function node?

  I'm form Switzerland, my English may have a few errors. Sorry for that.

  What I've done so far:

  * I opened VisualStudio 2008 and created a new project.

  * For this I used the model ' class library ' (because I live in Switzerland, I have German versions of visual studio, and labview. So, probably, it is not called exactly "class library" in the English version)

  * The project is created and I can insert my functions.

  * but here I have some difficulties: in my tutorials, they say that a function should be defined as follows:

  type name (arguments) WINAPI

  {

  code

  }

  for example

  unsigned int WINAPI multiply (unsigned char, unsigned char b).

  {

  unsigned int c;

  c = a * b;

  return c;

  }

  but when I try to compile the project I get the errormessage:

  SyntaxError: missing; prior to "multiply".

  * When I remove WINAPI, it creates the dll file

  * but when I try to open this dll with a "call library function node" in labview, I get an errormessage labview, that my multiply function is not found in the dll.

  I'd be happy if someone could help me with this.

  You need adorn your statements with extern "C". LabVIEW manages only the C dll; It cannot manage the C++ dll, which is what you will get if you do not have extern "C". I do not understand why you are trying to use 'stdcall '. For a normal DLL just stick to C-calls.

  The link provided by Red rooster is for Visual C++ 6, which is a very old version. I suggest you look at instead, because it deals with Visual Studio 2005.