Problem recording session invites the RAZR

Similar Questions

• Problem recording photo after the edition of windows live photo gallery

  Whenever I try to edit an image in windows live gallery and try to save it, I get the following message appears AN ERROR IS PREVENTING PHOTO GALLERY OF SAVING THIS PHOTO.

  Can you offer me a solution or let me know if microsoft has a fix for this problem

  Hi jetparjas,

  Thank you for using answers Forum.

  You use software to back up your information?
  Maybe a new external drive with a backup program?
  Using drive encryption?

  Looks like some program prevents the Gallery to save changes, this usually occurs with a backup software that monitors changes in the files. Sometimes the software that allows us to make changes think the file is open somewhere else and it will not save.

  You can try to perform a clean boot to see if a startup program is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Z10 invite the blackBerry BBM

  I've started BBM, selected "invite", sent the invitation to an e-mail address.

  The target has received and has appeared as an invitation BBM, which he accepted.

  I received a response, which also seems to be by e-mail. When I go online via the web, I see the response email.

  But:

  On the Z10, I chose manually "Refresh", I've seen momentarily the response email appear in the HUB, and then he passes out.

  I don't see anywhere in the HUB.

  I checked BBM, and it shows no new contact, or anything like that?

  Any idea what's going on?

  Thank you

  I think that my goal of the invitation did not accept the invitation correctly some how.

  I sent invite him and told them to accept inside BBM and it seems to have worked this time.

• On facebook, I'm suddenly in the sessions 'invited '. Want to go back to 'no comment '. Can you help me, please?

  Failed to save the session invited other photos

  We cannot help with the Facebook site or approx. Try https://www.facebook.com/help

• I am facing problem with playback of the audio recorded.

  Original title: sound recording problem

  Use built in mic, I recorded w/vocals/guitar,... and playback starts well, but after a few seconds the sound loses the basis... or low frequencies.

  It is uniform everytime I try. What I am doing wrong?

  Rich

  [Moved from comments]

  Hello

  What version of the Windows operating system is installed on your computer?

  If I understand correctly you are facing some problem with the audio recorded. There is no way to lose the sound after a few seconds; There seems to be a problem with the registration. I suggest you to run the game audio recording Fixit then try to register once more and check if it works.

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Hope the information is useful.

• problem opening session: the user profile service failed to connect

  original title: problem opening session

  I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix

  This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.

  Is that what your error message: unable to load the user profile and the user profile service has not the opening of session

  If so, please read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a system restore first, if not help, run it
  Microsoft support tutorial below.

  2. If you cannot connect to your own account, you see another
  next to your admin account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
  the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a
  Date of when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

• Internet problems after having disconnected the VPN session

  I was wondering if someone could tell me a solution for this problem I have.  A year or more ago.

  When I had Vista (32 bit), I used to use Cisco's VPN IPSEC client.  At the time, I found that when I disconnect a VPN session, something on my machine would get watered upward.  In other words, I could no longer RDP to my machine from another machine (which I would do so on the internet).  I also found that I could not access other services on my machine to other machines as well through the internet.

  Basically, I found this case I disabled/re-enabled my NIC (do it manually or by restarting), I was able to connect once more to my machine.

  Now I have Windows 7 (64-bit).  So now I also use Cisco SSL VPN client.  I had hope that this should disappear with the new operating system and the new VPN client, but the problem persists!  Fortunately, the Windows 7 Task Manager can be triggered based on the events that occur.  I created a task that will disable/re-enable my NIC whenever he sees the event of disconnection of SSL in the registry.  While this is a great workaround for me, I would go at the bottom of the issue.  I even helped others in my office with the same question by providing my elegant solution!

  Side note: my friend just asked me why he couldn't TRACERT what either.  He spoke to me through our enterprise IM client while VPN was in our network.  I asked if he was on the VPN on the attempt, and he said that it has disconnected first thinking it was the case.  I suggested to him that he can hit the same question that I have, in that the VPN is somehow corrupt its TCP stack or something.  I asked to disconnect from the VPN, once again, turn his NIC, and lo-and-here it could once more tracert.

  This issue is documented anywhere?  Are there patches?

  TIA,

  MCDONAMW

  What version of AnyConnect you test with?  This could be related to bug CSCsz12568 that has been fixed in the 2.4 client later.  What you can do is capture a snapshot of the Windows routing table before connecting, once connected, disconnected and then again later to see if there is not strange roads that can be bad traffic orientation.

• How to limit what is shown on the recording sessions

  Is it possible to stop for example the participant and poll pods that appears in the record that is just to show the presentation and have the audio during recording sessions?

  Any advice appreciated

  Thanks in advance

  When you are in the registration tool to edit, you can click on the settings button in the lower left corner and you'll be able to obfuscate the names of participants and you can hide the cat. Participant and Q & A pods. This does not give more real estate to the presentation, but it prevents these pods to be seen. You can draw attention to the button full screen which is at the top of the module sharing with the presentation in it. The record Viewer can click and only watch the presentations.

  

  The other alternative is to take the audio from the recording and use it to create a Presenter presentation. I've done several times, but this is not necessarily a quick process. But it does not give rise to a presentation that is just the set of slides and audio.

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• How can I find the maximum number of recorded sessions ever?

  Hello

  I see the sessions_highwater column in the license of $ v is the maximum number of sessions since the database startup time, but I wonder if there is a view that shows the maximum number of sessions ever recorded? (that is, before the last restart of the database)

  Thank you!

  Jon

  Query dba_high_water_mark_statistics

• Find the number of times that the recorded session has been seen?

  Is it possible to find the number of views in Adobe Connect once a recorded session has been made public? Under the dash of meeting it keeps track of these views for 30 days, but I can't seem to find anywhere in the reports where to find this information.

  If you move recordings to the content library, then you can take the standard content reports, which will display the number of views.

• Since the installation of FF4, I wonder is if I want to save the tabs to close, and they are not open during the seizure of the next session. The only way answer correctly is opening in safe mode.

  As suggested in the troubleshooting guide, I have disabled all of the Plugins/extensions, search for corrupted files potential and checked all the settings (although it does not seem to have one for this feature) all to nothing does not. FF behaves as I hope however when closing and reopening in safe mode. All previous versions of FF I got does not show this problem.

  One of the changes in Firefox 4: by default Firefox 4 does not display the warning "Save tabs and exit" then to the closure of several tabs, but it can be turned on again by changing some preferences.

  • Record of the tabs was not removed from Firefox 4, but it works a little differently.
    • By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs in the output. You can restore the next time by selecting "Restore previous Session" in the history menu, or by pressing the button restore Firefox's default homepage.
    • Note: This was a decision by the developers. On this forum, we are all volunteers without compensation here to help other users. Develop them and employees of Mozilla/Firefox rarely, if ever visit here.

  Browsing history must be saved

  • Button Firefox: Firefox button > Options > Options > privacy > [X] Remember my browsing history
  • Menu bar: Tools > Options > privacy > [X] Remember my browsing history

  Also, make sure that you do not erase "Browsing history" when you use clear recent history or when Firefox is closed

  • Using clear recent history
    • Button Firefox: Firefox button > history > clear recent history
    • Menu bar: Tools > clear recent history
  • When Firefox is closed
    • Button Firefox: Firefox button > Options > Options > privacy (verified) > settings
    • Menu bar: Tools > Options > privacy (verified) > settings
  • See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History

  To display the message "save tabs and exit" when closing multiple tabs, you can do the following:

  1. Type of topic: config in the URL/address bar and press the Enter key
  2. Accept the warning message (promise to be careful)
  3. Open the preferences/list page
  4. Filter = browser.tabs.warnOnClose
  5. If its value is set to false, double-click top (in the lower panel) to toggle its value to true
  6. Repeat steps 4 and 5 for the 3 following preferences also:
     • browser.warnOnQuit
     • browser.warnOnRestart
     • browser.showQuitWarning
       • Note: last pref is new in Firefox 4 b 12, may need to add (boolean)
       • Info/instructions for the use of topic: config: http://kb.mozillazine.org/About:config
  7. See:
     • https://support.Mozilla.com/en-us/questions/785169
     • http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2105039 & p = 10434467 & sid = fd2a35945bb2c633687f7b50d8c53989
     • http://blog.zpao.com/post/3174360617/about-that-quit-dialog

• Really confused on how to record voice over the music, how can I?

  Hello. I have currently the adobe audition trial it just says: Adobe CC. First off I know it does not part of my question but CC is good enough or should I look for in an another verision: I'm doing the songs.

  I upgraded to audacity and am confused about the simplest thing. In audacity, that I could record through my microphone and recording listen to my music in the back, with my helmet and the record like that. In Adobe Audition, it seems that I can't register unless my entry and exit are my microphone, which confuses me too (im a beginner), the only way I can save is if my microphone is my entry and exit put then I hear nothing, I save or any music I put out there.

  I can hear the music if I switch my output to my headphones, but then I can't save... I am so confused I just want to listen to music through my headphones and save with my microphone, but I can't save it unless my return is my microphone. One thing I read was trying with multitrack, but when I open a multitrack session, the symbol of the recording fades and I can't click on it to save.

  To expand a bit on what Steve...

  Yes, the hearing is completely until you want to do and because it is a professional software, a ton more.  The problem is what makes learning much steeper than simple programs (but by limiting further).  Just to give an example, on my set up I can save 32 simultaneous sources (in multitrack) and implemented several different streams to be monitored.  With this versatility comes complexity, however, and I strongly suggest that you spend a few hours with some of these video tutorials available by searching.

  To give you a brief overview of what you need to do to get started:

  Go to the Session File/New/multitrack, set up for the bit depth and you want sampling rate, mono or stereo (probably stereo) and all that kind of thing, then give it a name.

  Go to Edit/Preferences/Audio Hardware and say audition to use your default microphone input (you may need to go to your Windows Audio control and set up there if you mic does not appear on the list of the hearing).  Then configure the default output to your computer or the headphone speakers.

  On the multitrack display, choose the track you want to record in (I'll assume that you already have a piece of music that you have open in a track) and make sure that the input source is your micro - entry is this box with the right arrow in the box to the left of each track.

  Click on red 'R' to the left end of the runway to allow registration - just the track (s) you want to save, not those with the existing equipment).  If you want to make your voice heard through the computer, click on the little 'I' next to the 'R '.  It routes your input to output, but as Steve says, your computer could introduce a latency.

  At this point by clicking the Red record button in the main transport controls should begin to register with reading going out of your computer.

  Now, it's essential, but you have a ton of options (and a ton of shortcut keys, if you choose to learn).  Why so complex for a single track?  Simply, if you record multiple tracks at once of the external speed then you should be able to tell hearing what source put in which the track.  Once get going you, you can create a model of 'session' If you want to use the same set up every time.

  Recycle than trying, but I suggest you strongly look at some tutorials for more details - and I'll second comment Steve, whatever DAW you decide subsequently, a priority purchase of an external audio interface to work around the one built into your computer.

• NEW_FORM opens in the SAME session, but the data are not visible

  We have a requirement like this:
  
  -Our menu calls other forms using NEW_FORM
  -In the KEY OUTPUT of all forms of our that we call the form of menu using NEW_FORM
  - We do.
  -In the menu (form) before we call a form using NEW_FORM insert us a record in a table. We have no ' commit.
  -Normal form of an application is open (e.g. billing form)
  -We close the form of billing.
  -KEY-RELEASE of billing forms call the menu using NEW_FORM (menuform) form
  -In the Menu when new forms - form example, we must now read the inserted record and get the values of line
  -Read us the data, BUT the problem is that the line is not there.
  
  I tried this:
  -I put debug code to see if the form menu and other forms will open in the SAME session.
  - And Yes, 63325/138/79687 what we get for sid, serial #, audsid from V$ SESSION for all other forms and
  -the form of menu
  -This means that all open forms (forms app and form menu) using NEW_FORM opens in the SAME session.
  
  My question is:
  - If forms will open in THE SAME SESSION, why is - our inserted line is not visible when we come back to the
  switchboard form?
  -If we are COMMITTED to the line, then it becomes visible.
  -The problem is that we cannot make according to the requirement of the app.
  -We need her to be visible ONLY for the connected to the users session.
  -I tried using a GLOBAL temporary table and the result is the same as above.
  
  Any advice would be greatly appreciated since our application is based on the insertion of a record in the form of menu, calling from any other form of app, and when the menu form is called again this line must be visible to read.
  
  Published by: Channa 18 April 2010 22:44

  By default, the NEW_FORM did a restore when it is called, your insertion will simply be rollbacked.
  Some ideas of what you can do:
  -Using a GLOBAL TEMPORARY TABLE with ON COMMIT PRESERVE, and then issue a commit in your code after insertion
  -Use a context in the DB to store data
  -Use a package in the db to store data

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.