600 proOne G2: invalid function byte - CRC fail

Similar Questions

• Declaration of invalid function generating a range of service

  Greetings-

  I am trying to create an instrument in 2013 CVI driver.  My successfully the DLL builds, I then open my header with my export file and select options-> generates a function tree.  All my statements of functions return with "invalid function for statement.  I can't focus your web searches to shrink in generation of functions and the error Panel.  So I submit to you my problem.

  Below is my header file...

  #include "Simulator.h".
  #include "visa.h".
  #include "vpptype.h".

  #if! defined SIM_INCL
  #define SIM_INCL

  #define DEFAULT_BUFF_SIZE 512

  ERROR SETS
  #define SIM_CONFIG_ERR-1001
  #define SIM_CONFIG_TIMO-1002
  #define SIM_CONFIG_BAUD-1003
  #define SIM_CONFIG_DATA_BITS-1004
  #define SIM_CONFIG_PARITY-1005
  #define SIM_CONFIG_STOPBITS-1006
  #define SIM_CONFIG_TERM_CHAR-1007
  #define SIM_CONFIG_INIT-1008

  #endif

  enum PRNDL_State {PARK = 0, REVERSE, NEUTRAL, DRIVE, LOW};

  FLOWCONTROL MEASURE

  typedef enum _flowcontrol
  {
  NO = 0.
  XON_XOFF,
  MATERIAL
  } FLOWCONTROL;

  PARITY OF UNINSTALLATION
  typedef enum _parity
  {
  NOPARITY = 0,
  ODD,
  SAME,
  MARK,
  SPACE
  } PARITY;

  MEASURE COMPORT_SETTINGS
  typedef struct _comport_settings
  {
  int baud_rate;
  int DataBits.
  PARITY parity;
  StopBits double;
  int portNum;
  FLOWCONTROL flowcontrol;
  char * ComName;

  } COMPORT_SETTINGS;

  -> ConfigUtils
  int __stdcall ConfigSimulator (ViSession DefaultRM, COMPORT_SETTINGS SimPort);
  extern int __stdcall SimulatorSetInit (void);
  extern int __stdcall CloseSimCom (void);
  ///<->

  -> SetterGetterFunc
  extern int __stdcall SimulatorSetVBatt (int State);
  extern int __stdcall SimulatorSetIgn (int State);
  extern int __stdcall SimulatorSetAcc (int State);
  extern int __stdcall SimulatorSetPrndl (int NewPosition);  / * P = 0, R = 1, N = 2, D = 3, L = 4 * /.
  extern int __stdcall TapUpDwn (int NewState);   / * 0 = no no tap Tap Up Dwn * /.
  extern int __stdcall derivator (void);
  extern int __stdcall ReadVBATT_Status (void);
  extern int __stdcall CallReadSimulator (void);
  ///<->

  Hello don,.

  If you ViSession typedef in your head, it works. I think that the included headers are not checked.

  You can set it as

  typedef ViObject            ViSession;
  

  the same as in visatype.h

  If you set different you should get an error to the compilation, it should be safe to redefine.

  After you do this, remove extern specifier to other functions and generation fp must succeed.

  Constantin

• GGetting advapi32.dll error invalid function on bootcamp

  Original title: at the start, I am reciving an error "invalid function advapi32.dll" almost all start-ups. How can I troubleshoot this to clear the error?

  Do not know what is the origin, online searches, just trying to sell me programs to erase it. some answers say hardware problems, software. all my gear works as far as I can see, no errors in the hardware Manager.

  Win xp SP3.

  Thanks in advance for any help!

  You are welcome. Marking of one (or several) of our responses as RESPONSE will officially close your thread. (No, you can't score a the answers as RESPONSE.)

• CRC failed with the installation of revit 2013

  CRC failed with the installation of revit 2013

  CRC errors can be avoided by using a different web browser, another upload method (may be trying the download now option if available), or by temporarily disabling any antivirus software and firewalls, because they can be terminated prematurely downloading.

• Cannot find the file adautostg.pl, &amp; "CRC Failed" while unziping parts.

  Hello world. I started to install oracle EBS 11i on Windows Server 2003. Download Oracle® Applications 11i 6.2.5 Media Pack v1 for Microsoft Windows market place all parts/disks. Installation Guide says prepare the stage space by running 'adautostg.pl' from the beginning to hear the disc. I downloaded and unziped it manually and sought to "adautostg.pl" but do not find! can someone please help me... thanks in advance.
  
  As I am unable to find "adautostg.pl" I started to create the stage space uncompressing parts manually (I use winrar). While opening the zipper, 3 parts gave me "CRC Failed error". He names are
  ------------------------------------------------------Part Name_ ---------------------------------------------------------------File Name_
  Oracle® Applications 11i 11.5.9 to Microsoft Windows version quick install databases - disc 2 - B11409 - 01.zip
  Oracle® Applications 11i 11.5.9 to Microsoft Windows version quick install databases - 13 - B11420 - 01.zip disc
  Oracle® Applications 11i version 11.5.9 for Microsoft Windows Installer APPL_TOP quick - disc 5 - B11434 - 01.zip
  
  I have redownloaded every part and unziped, you have the same problem and I did it twice... but now use... Please help me...
  How I downloaded the parties:
  went to http://edelivery.oracle.com/
  Details entered
  Select a product Pack-> E-Business Suite
  Platform-> Microsoft Windows (32-bit).
  Click OK
  and then in the results, I have chosen Oracle® Applications 11i market place 6.2.5 Media Pack for Microsoft Windows (part B18712-01 no.)
  And him downloaded all the downloads manually.
  
  Thank you
  Pratap.

  Hello

  How much will it cost?

  Check [Oracle Store | https://oraclestore.oracle.com] website.

  Kind regards
  Hussein

• Ms - dos invalid function

  Hello. I am backing up my laptop to school on a drive hard, and every time I try to save my work on what ANYONE, it says invalid ms - dos function. IV tried to put it on my ipod, portable hard drives, 3 different memory sticks, disks, sd cards, and none of them work. How can I backup my stuff and fix this

  I'll just take the School technicians, but thanks for your help. very much appreciated.

• Update Palm 600 Palm desktop to Centro Palm desktop fails

  I have an old Palm 600 and recently upgraded to a Palm Centro. When you install the new Centro Palm software, I wonder if I want to upgrade the desktop software 600 alumni. My answer is Yes. The upgrade is displayed at the end OK, but when I go to the program files list, Palm icons do not include the Palm Desktop software. It seems that the upgrade has actually failed and wiped out the old desktop software without having to install the new. I confirmed this by trying to synchronize the Centro, and it fails to connect. Then I try to install the desktop software Centro directly fom the CD icon (the intro screen does not include the installation option). I installed the Office of Centro very well, but none of the old Palm 600 data is postponed.

  How can I solve this problem and get a good upgrade?

  In the meantime, I have with beams in contact data and a memo on and some applications, but I am not able to beam of calendar information. I lost also some info as Favorites in contacts.

  Thank you. I have that will soon give a try. I also discovered that I could export the old data from the Office of Palm 600 and import it into the Office by Centro as another enough work around.

  Message is about: Treo 700 p (Verizon)

• IBM 600 X (2645-4eu) menu BIOS F1 failed

  Rebuilt an IBM 600 x: replace keyboard, new working well, added RAM and it gets correctly counted, added CD and floppy both work, BIOS updated successfully from boot floppies, ran IBM diagnostic disk successfully from boot floppies, replaced the main battery, replaced the CMOS battery, and reset BIOS F1 started in Puppy Linux boot CD successfully to extract useful files from a crashed HD with Win XP Pro - everything works OK and the system tried to start in damaged Win XP Pro.

  HD shot from your cell phone, applied the adapter connector to read the HD and try to recover the Win XP Pro license affecting slave and plug into a PC running data recovery software good office. Managed to retrieve desired data volumes.

  Radiation of the desktop PC HD, cavalier radiation slave (don't remember whether or not she had a date to select cable when I removed it from the laptop). Reinstalled HD cell without any rider and quickly met opinion (despite the recent replacement) CMOS battery failure, then replaced the CMOS battery again and set the date and time, and temporarily short-circuit BIOS reset buffers in compartment of DRAM.

  At this point, the laptop does not start from any device, HD, CD or floppy and no error message. F1 outfit to turn on fails to bring up the menu of the BIOS Setup. Tried to add HD rider in positions to drive HD-0, 1 - HD and select cable without any positive result. Laptop turns on, powers, but does not read the floppy drive and CD, counties of RAM with success and stops. Tried to delete all the devices, same result.

  Someone has any idea how to enter the BIOS setup when F1 at startup fails?

  Removed all THE RAM, batteries, appliances, let all time, connected battery CMOS and attempted to enter the F1 menu with the same result, counties of memory followed just a slight staccato sound, no system emits a beep, then nothing.

  After talking with several technicians of laptop repair local in person today, several suggested that the likely low staccato sound was a clue that the cooling fan has been blocked.  I was told to blow out the unit with a compressed air gun.  After the failure of the effort that above, I took the unit my garage and used 100 lb/po2 air compressed on a nozzel 1/8 inch to blow into each opening, I could find, and a significant cloud of dust was released.  After reinstalling the battery unit, then started normally.

  Problem solved by compressed air.

• The function init system failed, Uunixerr =: msgget: no such file or directory

  Windows Server 2008, Enterprise Edition
  tuxedo11GR1PS1
  
  
  When I run the command "tmboot-y", I got the following error information to the ULOG file:
  105806.RNO05045.us.Oracle.com! BBL.3536.5040.0: LIBTUX_CAT:681: ERROR: failed to create the message queue
  105806.RNO05045.us.Oracle.com! BBL.3536.5040.0: LIBTUX_CAT:248: ERROR: function init System failure, Uunixerr =: msgget: no such file or directory
  
  What is the problem? Someone help!

  Hello

  You seem to be with the team Oracle Tuxedo and lists of internal dissemination and discussion groups are probably a better way to solve internal issues to this external focus group.

  In any case, I think that their may be a tuxedo with internal debugging information generation and release a production version of the tuxedo even on this machine. Services of the IPC for the versions built with and without debugging are not compatible between them and a version cannot create the IPC resources when the IPC for the other build service is running.

  Ed

• Re: Satellite C660 - recovery media error - CRC failed

  Hello

  I did the 2 toshiba floppy recocery
  I got a virus on my laptop so I I placed disks in my laptop

  I did the following:
  -place the drive in the laptop
  -reboot
  -Started from the dvd
  -follow the instructions
  - then you have to copy 2 of 9
  -then error: copy of splitpart or the Canadian Red Cross has failed

  can anyone help?

  I'm afraid there is no Mr. help something must be wrong with recovery DVDs.
  Do you use it for the first time?

• invalid ms - dos function trying to move files

  When I try to copy a video file of the virtual cd drive in win7 based on hard disk, I got an error message displaying back disabled function

  original title: ms - dos invalid function

  Hello

  ·         Since when are you facing this problem?

  ·         If it works well before?

  ·         You did changes to the system?

  ·         You have security software installed on your system?

  ·         You are able to copy the external hard drive to the computer?

  ·         Is the CD a copyrighted?

  ·         Are you able to copy files to other disks?

  Try running the fixit from link and check if this solves the problem.

   

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know more about the State of the question.

• Function keys do not work on my Satellite C855 1GN

  I have a Toshiba Satellite C855-1GN, I received as a gift for Christmas.

  I just have it for all my college work, but I noticed my function keys changed round.
  Usually when I hold the FN, is for the f1 to f12 keys but suddenly it's the other way around and that's what the key is for example (brightness, etc.).

  Now it seems simple, but I found that not the case...

  I was in the BIOS and I checked the settings and changed them several times, but still the value of special function parameters, it does not work.

  I've been on the HWsetup and checked, but even once, even the special function value, it fails to work.
  I tried various keyboard shortcuts suggested by people because the key fn is 'locked' or however they described, but still I can't understand what has happened and how to restore it.

  I can't stand my laptop being that I just got used to it and use the other keys MUCH more than the F-keys.
  Please can someone help me?

  Hello

  This information could help you?
  + * Function key changes in Satellite and Qosmio 800 series * +.
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  Please give some feedback

• acquireBoard fails

  Hi all,

  A few weeks ago, I posted a question on my new project companys (for series M of NOR-one Windows XP driver development / environment RTX).

  A few days ago I received the material (one card PCI-6250) and launched the project.

  As a first step, I was planning on compiling the Windows examples, get the basic functions to work and then go from there. I'm working on a Windows XP system only for now, RTX will be included at a later date.

  I managed to compile the examples and the pilot of nirlpk.sys without any problems, but when I run the example aiex1 the "acquireBoard" function will always fail.

  It seems that the list of devices "list (nirlpInterfaceGuid) tDeviceList" is not created correctly... the list is always empty.

  The map itself seems to work very well, since I can see in the Explorer of Measurement & Automation.

  Anyone know what could be causing this?

  Thanks in advance.

  Hello

  Your description, it does not appear that the Council actually uses the nirlpk.sys for the driver.  Since you have measurement and Automation Explorer... I guess you have DAQmx installed on this system and that the DAQmx driver or nipal.sys is actually getting used.  So that the nirlpk.sys driver can be called by acquireBoard, it must be the driver for the Board of Directors.

  Update the driver in device driver for nirlpk.sys Manager would be the first step to get this working.  You will need to get rid of DAQmx... I have not tried to use our DAQ cards in the DDK with DAQmx installed on the system.

  Thank you

  Steven T.

• fwrite error: try to write 26 bytes of file and the problems

  I'm writing 26 Hex bytes data file using fwrite and I have unknown problems because of which has written 27 bytes

  /////////////////////////////////// Code ///////////////////////////////////////////////////////////////////
  FILE * READ;
  READ = fopen ("DataReceived.dat", 'w'); opening the file for writing

  unsigned char data2send [26] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
          
  data2send [0] = 0xEB; conferment of the data
          
  data2send [1] = 0 x 90; conferment of the data

  data2send [10] = 0x08; / / data assignment
           
  crcsent = calCRC16 (data2send, 24); calculation of 24 bytes CRC and the addition of crc (16 bit) to last two bytes of data
          
  data2send [24] =(crcsent>>8) & 0xFF; Added to the second last octet CRC
          
  data2send [25] = (crcsent & 0xFF);   CRC has added up to the last byte
         
  If (ComWrt (coms, data2send, 26) == 26) / / send data to com port
  {
               
  fwrite (data2send, 1, 26, READ); ===> writing data in the file where there is problem
      
  }
  /////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Production (WRITTEN in the file) should be:

  0xEB 0 X 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0A 0xA1

  Output that I get the file (which is incorrect) and do not do because I've specified 26 bytes to write

  0xEB 0 x 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0D 0x0A 0xA1

  How 0x0D is added to my data, even though I'm only add data Byte 0,1,10,24,25

  When I write 26 bytes then how 27 bytes are written to the file?

  Thanks in advance

  arfaoui

  I can only imagine that the problem may arise from opening the file in text mode and write on it (0x0A) a line break character: the system can automatically add a CR (0x0D) in order to maintain the standard CRLF. Try opening the file in binary mode instead (fopen with "wb" specification).

• Installation fails for SQL Server SP 2 on SQL 2008 R2

  I have SQL 2008 R2 Developer Edition (64-bit) running Windows 7 (64-bit). I followed many workaround solutions listed on this forum all to no prevail!

  I noticed an error in the log in details:

  2010-12-22 06:02:08 Slp: error: Action "SqlEngineConfigAction_patch_configrc_Cpu64" failed during execution.
  2010-12-22 06:02:08 Slp: Action 'ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Patch_ConfigRC_postmsi' will return false because of the following conditions:
  2010-12-22 06:02:08 Slp: Condition "condition of dependence of the action starring: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Patch_ConfigRC_postmsi the condition check function: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64.» There are 2 characteristics of the dependant. The feature is tested for results: ValidateResult, result. "has failed because it has returned false and true was expected.
  2010-12-22 06:02:08 Slp: Condition is false, because the required functionality SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 has failed in the result

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for SQL server on Technet. Please ask your question in the Technet forum .

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.