Re: Satellite C660 - recovery media error - CRC failed

Similar Questions

• Satellite Pro C660-239 - restore from recovery media error

  Hello!

  I have a laptop from a client, it is a Toshiba Satellite Pro C660-239, and I'm having a strange problem.

  The original hard drive failed, and as the laptop is out of warranty, we bought a new hard drive and ordered the recovery media to this model, our assistance to repair local toshiba.

  After the installation copied the files on the disk, the imageX command fails when you restore the image with error files:

  "the file or directory is corrupted and unreadable."

  The hard drive is new, and I also tried with more than 2 hard drives, as well as with an external cd-rom drive.

  I spoke with the support of assistance local repair, and told me that this happens because the ins new ' t compatible with the recovery media hard drive?

  One of the new disks hard I tried, was the exact same model as the original hard disk, and the error persists, so the hard drive may not be the problem.

  Y does it have that no change in the recovery media is corrupt?

  Could also be a motherboard problem?

  Thank you

  > Is there any change in the recovery media is corrupt?
  Of course, this is possible.
  In case the HARD disk is OK, the recovery media may be damaged.

  > Could also be a motherboard problem?
  I don t think so. I imagine that the HARD drive is recognized correctly in the BIOS and the error message says something about corrupt directory. I guess the disk directory that is the meaning and I think that the media should be replaced.

• Satellite L500D - recovery media creator failed with the error code

  * I raised the 'Toshiba Board"&"Recovery Media Creator' in my laptop L500D to create the backup drive this process uses 4 disc DVD *.
  * Disc 1 & 2 went OK but Disc 3 has failed, saying "code error" 020150-20-00000000 "*"
  * disc then she created 4 {Win/Recovery Environment} {64} * no problem do - what do I do now?
  where {fingers crossed} requiring the backup will drive for it work with just the 1, 2 & 4 drive?

  Alan has soon

  There are two possible problems:
  The CD/DVD drive laser lens is dirty and cannot properly manage any disk or disks are not entirely compatible.

  Recommend to clean the laser lens with a cotton ball and alcohol tip in most cases its pretty good for cleaning the lens
  Also, try to use other discs of different brands...

  TDK R or R Verbatim discs are good never had no problems using it

• Satellite C670 - Recovery Media Creator launch! Error link

  (Google translation)
  Hello

  Recovery Media Creator will not start. Missing link, error 'TRMCLcher.exe '.
  I can't find the software on the Toshiba site!
  Here's what the file contains Toshiba Recovery Media Creator:
  http://hpics.Li/6dfd626

  Where can I find Toshiba Recovery Media Creator?

  Thank you

  Richard

  Hello

  Toshiba recovery media creator is only preinstalled on your laptop and cannot be downloaded. I put t know why the program doesn't start anymore but you have deleted this file or uninstalled any tool from Toshiba? This would explain why recovery media creator doesn t start

  The only option you have is to reinstall the OS again. You can use the HARD drive recovery function, as described in your user manual or follow the link posted by Timox.

  If you have already created the recovery media, you can forget it, but otherwise it is important that you are installing to HARD drive recovery and create the recovery media. As you can see in other threads some users would need the support of recovery but they n t does so don t make the same mistake ;)

• Satellite C660 - TOSHIBA Accessibility error

  Hello

  I recently bought a Satellite C660/C660D fine, apart from one or two minor issues (which this thread is on about). First of all, the laptop was and is still littered with loads of random software from TOSHIBA, here is a list:

  + TOSHIBA Assist +.
  + TOSHIBA Bulletin Board.
  + TOSHIBA ConfigFree +.
  + TOSHIBA Disc Creator +.
  + TOSHIBA face recognition.
  + Support utility TOSHIBA Flash Cards +.
  + TOSHIBA hardware setup +.
  + TOSHIBA HDD/SSD Alert +.
  + TOSHIBA Media Controller +.
  + TOSHIBA Media Controller plugin +.
  + TOSHIBA online product information.
  + TOSHIBA Recovery Media Creator +.
  + TOSHIBA Recovery Media Creator reminder +.
  + TOSHIBA ReelTime +.
  + TOSHIBA Service Station +.
  + TOSHIBA supervisor password +.
  + Toshiba TEMPRO +.
  + Package + Toshiba value added
  + TOSHIBA Web Camera Application.

  Is there an ISO image of recovery pre made somewhere or do I have to make my own, because if I decide to unisntall some of these programs, I could need at a later date?

  The second issue is with the TOSHIBA Accessibility application which shows the FN keys, it does not seem to start. He worked the first day then I disabled all startup TOSHIBA applications and I get the following error: "registry is missing or may be broken. ', I don't know why!

  I tried cleaning the registry, as well as the registry is not broken.

  * Thanks in advance *.

  -Olivier

  Hi Olivier,.

  I'm happy to hear that you are owner of laptop Toshiba too and you've discovered the forum here. We can discuss everything on laptops from Toshiba, that s interesting :)

  I'll try to help you resolve this issue:

  1.Yes, there is a recovery image for restore factory settings with all drivers and tools on your laptop but is important burn you this image to a blank DVD using pre-installed recovery media creator. You will get a disc with an image of Windows with all the drivers and tools => settings of the case. Thus, the same parameters as you purchased the computer.

  2.i think that FN keys don t work because you have disabled some important tools Toshiba they are necessary for the FN keys. For FN keys TOSHIBA button Support and TOSHIBA Flash Cards startup items are absolutely necessary, so you should allow them and restart the computer.

• Satellite C660 - recovery partition is there but can I make backup discs?

  Hi all

  Just a query
  My GF turned on his PC series portable Satellite C660 and it would not start, we have tried to open the restore from the recovery partition sequence but kept getting the error that progresses at the start (error said to a device USB has been disconnected).

  As you probably guessed that she never did the backup disks when you are prompted, everything I could think of used a drive to win 7 and reload this way then try to make recovery disks after (I didn't activate)
  so win 7 has been installed well and all the drivers of origin that was all last week.
  Now to the crunchiness, the recovery partition is here now, I do the recovery disks and install from those, win 7 I installed it will soon take activation
  Any ideas?
  Thanks in advance

  After clean install of OS you can't create more recovery disk and you cannot install recovery image using the disk HARD recovery option (F8 at startup).

  Best thing you can do now is drive original order of Toshiba and use it for recovery image installation. It is certainly easier to have factory again.
  You can order it on https://backupmedia.toshiba.eu/landing.aspx

• Recovery media error

  Hello

  Today, I tried to do a recovery media defined for the operating system to my laptop (Windows 8). Image recovery has been successfully created, also transferated on USB, but in the verification phase, I got an error message and my recovery image was not properly moved. My USB has been formatted in FAT32 before the beginning of the creation of media. Is this a problem that caused this error? I need help because I want to have a factory image to my OS on a USB key.

  Thank you very for your help.

  I found my real problem. My USB storage is old and corrupt, and he was not able to register my copy of recovery discs using Sony DVD + R media with intensity all the Hp Recovery Media.However, I created and now everything is fine.

• Satellite C660 - 26G - unexpected error after removing the USB

  Hello all, I need help here.

  I have a Satellite C660 - 26G, 2 days and a USB key has been removed from the laptop while he was working, and I think that caused a kind of corruption.

  The machine starts, passes the logo and the windows, come the white loading bar along the bottom of the screen. It freezes about 1/3 of the way along and then throws an error screen indicating the following:

  "Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device, such as an external USB drive, while the disc is used... and so on... »

  It says to plug it back in and restart the machine.

  I tried this and always the same, I even connected on the two available ports and nothing helps, the same problem exists.

  Now, the forum search, I thought of nothing else but to restore the factory settings, because they don't have has no physical disks provided with the new machine.

  Use of the restart and the results of the F8 method in action and same error in the end.

  Bottom of the error screen States;

  Status: 0xc00000e9
  Info: An unexpected i/o error has occurred.

  Help, please?

  > Using the reboot and the results of the F8 method in action and same error in the end.
  If you are not able to get the advanced boot menu that appears by pressing F8 at the beginning of the right procedure initialization?

  HM in this case, I would recommend testing new OS install could be the last resort in this case.

• Satellite C660 - recovery disk fails error 1117

  Please can someone help. I tried to use my recovery disks to restore my laptop when it kept not start correctly. The disks did not work so I bought a set of discs from Toshiba on this Web site. I still have the same problem.

  What the failed hard drive or something else?

  If I buy a new hard drive recovery disks will work if the hard drive is not exactly the same as the one that is out?

  Hello

  Have you thought about the HARD drive?
  It could be a malfunction of the HARD drive that does not allow you to install the system.

  I recommend that you check the HARD disk for some potential problems.

  There is a nice tool called Drive Fitness Test. You can use it to check the HARD drive.
  Google simply to get the software.

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• Re: Satellite A100 recovery media

  Where can I purchase/download the recovery for a Satellite A100 media?

  Satellite A100 is old small model laptop so I put t believe that you will be able to order recovery image more.

  What you can do is to install the operating system that is supported by using the original Microsoft facilities.
  All the necessary drivers, tools and utilities, you can download from http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  BTW: Download image recovery is not possible

• Satellite L300D - recovery BSOD error + imagex.exe application error

  Hello

  My laptop lost function a while back due to some unknown errors. I managed to get most of the data on safe mode and transferred them on my desk.

  The problem I have now is to fix my laptop. I have since lost my receipt and so unable to guarantee; but I thought that I could restore my computer to its factory condition with the recovery disk that I created. The original problem and I'm facing can be seen here-> http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153146#153146<>

  As you can see on this thread, the recovery disk has failed. So, based on the advice I have received, I went to a computer retailer Toshiba Repair Center today and they replaced my hard drive with a SATA 120 GB Fujitsu. Then, I tried to use the recovery disk but ran into a few snags. (1) a BSOD happens randomly during the restoration, i.e. during the copy image it would pop up... sometimes he'd jump upward when it is finalizing the recovery. (2) sometimes, the BSOD will be bipassed, and instead, a mistake would come to 3% installation finalising saying that img could not be copied to the HARD disk in C /:! (3) sometimes a misapplication of image.exe would come saying 'the instruction at 0x77c45a20 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the program. »

  NOTE: None of these problems occur in the same resumption of the trial. But they made it up randomly and when they do, I have to restart the computer and try again.

  My question is this. Since the last piece of advice was to replace my faulty HARD drive, and I did, why I am still unable to fix my computer? And if it is not one of the HARD drive, then what is the problem here? I'm desperate to fix my laptop as it is meant to be my 14 year old office replacement. Thank you all for your kind attention; I only hope that there is someone out there who has faced and overcome such a problem before.

  Hello!

  It's not easy to say what the reason is for this. It might be the motherboard, HARD disk or a faulty RAM again. So it could be bad luck that the new HARD drive is also down

  I think you should test something on your laptop with special diagnostics tools.

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  After that, post your result. Maybe the test is a mistake.
  If this isn't the case, you should try it with a Microsoft installation disc. Maybe the recovery disk is noisy or so

  You can t find something you should go to the ASP again. Talk to the technicians and explain the situation. I think they'll try to help you as quickly as possible.

  Good bye

• Satellite A210-183 has error message "FAILED to RENDER GRAPH"

  Hello

  I recently bought a Satellite A210-183 with an AMD processor Turion 64 X 2, 2 GB of memory, ATI X 1200 graphics card 1.3 build in webcam and possibly other features.

  After 1 day use and that I had tried all the features and worked normally, when I tried to open my webcam, I got the message "FAILED to RENDER GRAPH"...

  I restart the laptop and once worked normally and other time showed the same message. I decided to return the labtop back to the store to change because there's a term in this store that modify the machine within 7 days after purchase.

  Certainly, the shop change the labtop with a new one. When I started again some of my programs installed on the labtop such as (msn & yahoo messenger, Nero, office, Sony ericsson Pc Suite and other programs of 1-2 and I had already tried to use the webcam and worked normally) after some restarts, I get the same message when I try to open the webcam... "" FAILED TO CHART RENDERING.

  Everybody knows why I received this message and I can not open the webcam? I get on crazy and I do not think that the problem comes from the labtop. Perhaps something else like a program operating...

  Please someone with something similar helps me.

  Thanks in advance

  It seems that this problem could be linked to the issue of software.
  Try to update the graphics driver and the driver for the webcam.

  Notes; you need to remove the old drivers before you install the new version.

  By the way; If you have problems using the webcam with the MS Messenger then check out this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=102403

  Greetings and dude good luck

• Satellite C660 - 1 DG-Toshiba Media Creator recovery fails creation DVD 2

  I spend a few hours in an attempt to create the floppies of recovery for my laptop (Satellite C660 - 1 DG)

  It fails on the second DVD at halfway. It just hangs. CTRL-ALT-DEL is no longer a cold start will have to start the thing.

  I tried several DVD but NOGO each time to halfway the second DVD, it crashes.

  I really need to create these recovery DVDs because Im going to upgrade the laptop to run a Windows Server 2012 install for development purposes.

  I thought that it would take only a minimum of time, but... of course...

  Any thoughs on is it possible to get this stuff working?

  Which blank media are you using?
  To create recovery DVDs, I highly recommend to use DVD-R virgins only. Of course, it must be high quality as TDK or Verbatim product.

  I have very good experience with these DVDs.

• Problem of C50-A-19 t satellite with TOSHIBA Recovery Media Creator

  When I try to do recovery dvd with TOSHIBA Recovery Media Creator burning fails.

  I have the Satellite C50-A-19 t with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.

  During combustion process, I get an error saying it is impossible read the file D:\ZZImages\ZZImages\install29.swm (file .swm in error change with different attempts).

  I selected the option to verify the dvd after burning.

  I tried several times: I try to make one dvd (requires 3 DVDs for a full recovery).
  I try 2 times with verbatim dvd + are trying the fist failed, the second succeeded with the same kind of support.
  I try to numb DVDs. 2. for two times with dvd - r and dvd + r support and it has not yet.

  On the windows error reporting, I find this error:

  and this alert:

  + Updated Firmware ODD problems with Toshiba Recovery CD Creator +.

  I see this solution to update firmware for different models of units of cd/dvd-rw

  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  but not on the model I have.

  I have:

  TOSHIBA Recovery Media Creator version: 3.1.02.55065006
  Windows 8.1 x 64.

  Is there a solution?
  is a known problem?

  Thank you

  Elena

  > I don't have a free USB key to test the usb mode.
  I recommend you to buy a separate USB memory key and to create the eventual recovery USB flash memory support.

  Please also check this other procedure described in this HowTO from Toshiba
  [How to create a recovery media USB flash drive to the valorisation of the ISO images - or (DVD) discs | http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]

  Comments are greatly appreciated