61850 initiate

Similar Questions

• Is NEITHER-Industrial Communications for IEC 61850 covered by all NI Developer Suite?

  Hello

  I downloaded OR-Industrial Communications for IEC 61850 14.0 and tried to activate it using my serial number for NI Developer Suite. However, I was said, "the following order numbers are not valid or do not correspond to their corresponding products.

  The same serial number was accepted for activation of OR-Industrial Communications for Ethernet/IP, so I thought that I would have access to all communication, including IEC 61850 toolboxes. Is it not the case? How can I check the toolkits are covered and which are not?

  Thank you!

  Hi JKSH,

  1. the NO-Industrial Communications for EtherNet/IP is included in the Developer Suite, as mentioned JDizzle: http://sine.ni.com/nips/cds/view/p/lang/en/nid/202469

  2. the IEC 61850, DNP3 and IEC 60870 toolkit are not part of the Suite of developer.

  3. However, you can buy Electrical Power Suite Pro + amulet of usefulness of the protocols and it has the EPS Pro and IEC 61850 and DNP3.

  http://www.NI.com/download/LabVIEW-electrical-power-suite-2015/5380/en/

  4. or you can buy each (IEC 61850, DNP3 and IEC 60870) toolkit separately

• Is there a button to push that initiates the screen saver without delay to launch?

  Is there a button to push that initiates the screen saver without delay to launch? I want to apply the screasaver with out having to wait the time it takes so that it starts on its own. Looking to see if there is a way to do this?

  Is there a button to push that initiates the screen saver without delay to launch? I want to apply the screasaver with out having to wait the time it takes so that it starts on its own. Looking to see if there is a way to do this?

  see if you can use this tutorial...
  To create an icon to launch the screensaver.

  http://www.howtogeek.com/HOWTO/Windows-Vista/create-icons-to-start-the-screensaver-on-Windows-Vista/

  PS adding...

  An easy way, scroll down for:

  Download of shortcut icons (Vista only). The author has created a "ready-made shortcuts.

  I have not tried. I can't guarantee it.* *.

• Initiate Orchestrator workflow through REST/Post with JSON body

  I am trying to initiate a workflow custom Orchestrator by issuing a MESSAGE from a client (in this case a violin) with the parameters in JSON format in the body.

  So far, I have been unable to get what anyone other than a 400 Bad Request and a "the request sent by the client was syntactically incorrect ()." in response.

  My environment is

  vCenter Orchestrator 5.1.1 Build 2942

  Java version 1.6.0.26

  The rest 1.0.1 Plugin is installed

  To verify that I am indeed able to initiate a workflow via a POST, I tested with XML in the MESSAGE body, just like a validation test. Given a data center TestDC2 I send the following

  POST https://10.144.20.62:8281/api/stream/d7614e92-0578-42b6-9c1f-04bd8a0533d3/executions / HTTP/1.1

  Authorization: Basic XXXXXXXXXXXXXXXXXXXX

  User-Agent: Mozilla/5.0 (Windows NT; Windows NT 6.1; en - us) WindowsPowerShell/3.0

  Content-Type: application/xml

  Host: 10.144.20.62:8281

  Content-Length: 311

  Connection: Keep-Alive

  " <-xmlns = execution context" http://www.VMware.com/VCO "> "

  < Parameters >

  < name of the parameter = "datacenterName" type = "string" >

  < string > TestDC2 < / string >

  < / parameter >

  < name of the parameter = "customerVMFolder" type = "string" >

  < string > aNewFolderVMFolder < / string >

  < / parameter >

  < / Parameter >

  < / execution context >

  I get a response of success

  HTTP/1.1 202 accepted

  Location: https://10.144.20.62:8281/api/stream/d7614e92-0578-42b6-9c1f-04bd8a0533d3/executions/ff8080813e847992013fa4ac4c2b046f /

  ETag: "0d41d8cd98f00b204e9800998ecf8427e".

  Content-Length: 0

  Date: Wednesday, July 3, 2013 13:15:22 GMT

  Server: vCO Server

  and 'aNewFolderVMFolder' folder is created under TestDC2

  The JSON equivalent

  POST https://10.144.20.62:8281/api/stream/d7614e92-0578-42b6-9c1f-04bd8a0533d3/executions / HTTP/1.1

  Authorization: Basic XXXXXXXXXXXXXXXXXXXX

  User-Agent: Mozilla/5.0 (Windows NT; Windows NT 6.1; en - us) WindowsPowerShell/3.0

  Content-Type: application/json

  Host: 10.144.20.62:8281

  Content-Length: 173

  Connection: Keep-Alive

  {

  'settings':]

  {'name': "datacenterName", "type": "string", "value": "TestDC2"},

  {'name': "customerVMFolder", "type": "string", "value": "aNewFolderVMFolder"}

  ]

  }

  gives a bad request

  HTTP/1.1 400 Bad Request

  Content-Type: text/html; charset = utf-8

  Content-Length: 965

  Date: Wednesday, July 3, 2013 13:21:02 GMT

  Connection: close

  Server: vCO Server

  < html > < head > < title > JBossWeb/2.0.1.GA - error report < / title > < style > <!-H1 {do-family: Tahoma, Arial, without serif; color: white; background-color: # 525 76; do-size: 22px ;}} H2 {do-family: Tahoma, Arial, without serif; color: white; background-color: # 525 76; do-size: 16px ;}} H3 {do-family: Tahoma, Arial, without serif; color: white; background-color: # 525 76; do-size: 14px ;}} BODY {do-family: Tahoma, Arial, without serif; color: black; background-color: white ;}} B {do-family: Tahoma, Arial, without serif; color: white; background-color: # 525 76 ;}} P {do-family: Tahoma, Arial, without serif;: white background; color: black; do-size: 12px ;}} A {color: black ;}} B.SID {color: black ;}} HR {color: # 525 76 ;} - > < / style > < / head > < body > < h1 > State HTTP 400 - < / h1 > < HR size = "1" = "noshade" noshade > < p-type > < b > < /b > < /p > < p > < b > report message < /b > < u > < / u > < / p > < p > < b > description < /b > < u > the request sent by} the client was syntactically incorrect (). < /u > < /p > < HR size = "1" noshade "noshade" = > < h3 JBossWeb/2.0.1.GA > < / h3 > < body / > < / html >

  After reading The POST CURL with vCO 5.1 REST API

  I also tried

  POST https://10.144.20.62:8281/api/stream/d7614e92-0578-42b6-9c1f-04bd8a0533d3/executions / HTTP/1.1

  Authorization: Basic YWRtaW46U2E1YWRtMW4 =

  User-Agent: Mozilla/5.0 (Windows NT; Windows NT 6.1; en - us) WindowsPowerShell/3.0

  Content-Type: application/json

  Host: 10.144.20.62:8281

  Content-Length: 266

  Connection: Keep-Alive

  {

  'settings':]

  {'name': 'datacenterName', 'type': 'string', 'field': 'local', 'value': {"value": "TestDC2", 'objectType': 'chain'}},

  {'name': 'customerVMFolder', 'type': 'string', 'field': 'local', 'value': {"value": "KamTestFolder", "objectType": "string"}}

  ]

  }

  with exactly the same results

  What I am doing wrong?

  Burke - State 415 code indicates the shift in the type of media, which is expected, because there is no Content-Type header

  KeyboardSlappingMonkey - I think that the body of the request should be something like the following (note the difference in the format of the value)

  {'settings': [{'name': 'datacenterName', 'type': 'string', 'value': {'chain': {'value': 'TestDC2'}}}, {"name": "customerVMFolder", "type": "string", "value": {'chain': {'value': 'KamTestFolder'}}}]}

  and you must pass the Content-Type header with the value application/json;v=5.1.1

  I hope this helps.

• How the customer views initiates the connection to the broker?

  Only the customer view to connect directly to the time the broker for connections and for the desktop is always the case in View 5?  Can someone explain the process?  Points will be awarded for all responses, thanks!

  The client initiates the connection http with ssl (port 443) to make the initial connection and authentication.

  The user then selects a pool of offices, depended on its installation traffic how each tunnel by the broker for the connections (Security Server) on the desktop.

  Depends on if the display protocol is RDP or PCoIP or it will be on port 3389 4172 but they can both be in the tunnel if the connection to the server or directly on the desktop.

  Linjo

• Bug 7372061 R12 APPROVAL INITIATE BUTTON IS grayed OUT FOR THE BILLS WITH WI

  Hello
  
  Is it patch available for > > > > Bug 7372061 R12 APPROVAL INITIATE BUTTON IS grayed OUT FOR THE BILLS WITH TAX WITHHODLING
  In workbench Bill initiate approval checkbox is grayed out for the Bills with the withholding tax.
  Fixed apinvutb.pls 120.44.12000000.15
  
  
  
  I tried to search on metalink but theres no such fix name.
  
  
  Thank you

  Hello

  I think that you have nothing to do at the moment. As suggested before, log a SR and do escalate the issue.

  Good luck!

  Kind regards
  Hussein

• Mouse click initiates not the selected action

  When you use safari 9.1.2, by clicking on an option (for example "advance to the next page") on a website does not result in the proposed action. A "drop-down list of the option" unnecessary and undesirable appears instead. I have to click on the desktop out of the active page and then go back and open the selection again, often several times before the mouse click allows selection. What's wrong? How can I fix this problem?

  Try the boot without failure and tests.

  Boot mode safe. https://support.Apple.com/kb/PH21875?locale=en_US

  Same problem in Mode safe?

• Initiate a R100 on the SD card slot.

  I found mention of R200s (?) be able to boot from the SD card if you put a picture of 2.88 MB floppy on support SD, that named the file $tosfd00.vfd and then choose the disk icon in the market of Toshiba boot menu.

  I have therefore updated my BIOS to 1.60, used the "SD memory card Format" Toshiba utility, found a boot for example, image copied to my SD card, rebooted, chose the diskette icon (I assume that this replaces the selectable boot order in Toshiba hardware utility) and unlucky - the machine from the HARD disk as usual.

  Does anyone have advice? Thank you!

  Hello

  AFAIK, you can create a bootable SD card using SD card start utility. In this case, the SD card has the same function as a startup MS-DOS disk. Unfortunately it will not help you because with this boot SD card, you can not see the contents of the HARD drive. Just the FAT32 partition is readable but not NTFS (available on your device). You can use the SD card to update the BIOS, or for the registration of the user password. All that s.

• Initiate a conversation GChat through Messages

  I have multiple google accounts synced on my Mac. Recently, I decided to start using standard mac applications in order to keep your computer clean and have less clutter in the home screen and less open browser windows (even recently shifted from using Chrome for using Safari, which was GREAT for me).

  Anyway, my question is simple: how to properly throw a gchat conversation via the messages app? I turned it on and connected and the app has even found the person in my contacts I was messaging, however when I asked if they received, they didn't. I'm sure that something is wrong and it might be a simple solution, but I'm just curious as I'm new to this use a lot of applications. Should I just download a GChat application or what?

  I have OS X Yosemite 10.10.5 (upgrade to El Capitan, soon, just not do it in the middle of the work week). And Messages version 8.0 is important at all.

  Thank you!

  Hello

  Two ways to implement.

  (1) enable your Google account in system preferences > accounts Internet messages

  (2) in Messages > Preferences > accounts choose Add (+ icon at the bottom of the list), and Google

  In general Google ID are Google Mail IDs ending is @gmail.com or @googlemail.com

  The good pair should be used (it seems that Mail with you to use is, but Google's Jabber server is more accurate).

  If you are unsure connect to Google in a web browser and it will tell you on the top right.

  Go to the General Section of the Messages preferences and uncheck the item subject to collect all list of buddies (accounts) in a single list.

  Now go to the window Menu and display a list of contacts from Google.

  This should list your buddies (use the View Menu to show offline buddies if you are not sure)

  Offline buddies can be ID added to the list of bad boyfriend (Apple released IDs and Yahoo or AIM email types follow the same format will be accepted, and will be always 'offline' because they do not exist) (issued Apple ID such a @me.com or @icloud.com which can be used as valid aliases AIM).

  In the contacts list, you can double-click the line that the boyfriend is to start a new cat (or put highlight and then use the icons at the bottom of the list or the Buddies Menu)

  A friend who has an indicator of red square next to their name is arranged at their end to be far away.

  However, in some cases, they can go offline and their status will not change but they may be not accepting offline Messages (which appear when the application starts again)

  Which of these ideas could be applied?

  

  21:29 Thursday. March 24, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• Sequence of flat do not initiate

  Hello, I am running a program that controls switching actuators and turn on and off Alternatively a backwash pump in a sequence to perform a bypass on a separation process we are trying to do. I have timers running in flat sequences to provide deadlines before putting the valves back, but when I run the program, the system stops in these sequences, unless I run mode 'highlight execution. " The problem exists in my two loops I have running etiquette to bypass the system.

  Thank you for your time!

  
  

• Found New Hardware Wizard initiate at startup with no new hardware installed

  Hi Xircal,

  Thanks for your interest.

  The Malwarebytes we were a beta with a lot of precautions.

  I ran the Sophos base scan on C:.
  Nothing that you marked for deletion.
  Just hundreds of hidden files, mostly in the Recovery Console XP (minint), the RRBackups, the preboot\helps, the two Norton .dat files: cltLMS1.dat & cltLMS2.dat

  Description: Unknown hidden file
  Removable: Yes (but clean not recommended for this file)

  Norton said: «these files are components licenses of Norton.» Legitimate files of Norton. (They are not paid for spelling)

  I could run a scan in depth tonight if you think necessary.
  I have a bunch of drives on this computer, but c is the one who starts.
  In fact, I have a separate drive that I use to download software executables, drivers, etc..

  Peggy

  Hi Peggy,

  Does not sound like there is nothing to worry about here.

  The 'new hardware found' is still running at startup?

  Also, could you possibly get in touch with Norton and ask them if ROOT\LEGACY_BEEP\XX_NPF_XX in Device Manager has nothing to do with the Norton Personal Firewall? It could be something as simple as that.

  I think you're right. I don't see anything unusual but one long-standing issue date with Norton Security turned off randomly on startup (I does not start unless I'm free to control and turn it on if it is off)

  I contacted Norton on that months ago and they were not able to solve it, but strongly advised I have remove a bunch of utility programs that they don't like. Split us up on this suggestion. I have uninstall Super Anti-Spyware, and you know the rest of this story. But I think Secunia PSI, Winpatrol, AutoCAD, etc. as essential to my well-being computer.

  I think I'll let the dog Norton are.

  The 'new hardware found' has NOT yet run at startup. Thank you very much.

  Assume that you have done at least what I asked you to do. I'll miss our daily interactions, but you'd better take your white hat to someone who needs your expertise more than me.

  Peggy

• When I put in a disk it is not initiate anything. Would that my auto insert notification the origin of the problem.

  When I put in a disk, it is not run anythinjg.  Would that my auto insert notification the origin of the problem.  I can pull up in 'my computer' and click on the hard drive all that it is jumping down and separates all programs.  Then it won't start.

  Hello

  You are welcome.

  The problem is solved?

• I can't open windows live a care.__WinSSUI.exe Application Error__failed to initiate properly 0xc0000135

  Cannot open Windows OneCare. Application error.

  Blinkermqan,
  Check this thread as it covers the error you see.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ZD8000 preinstalled software download software and Sonic Solutions do not initiate.

  1. I have problems with my HP Pavilion zd8000 computer DVD - RW drive and make installed software (Sonic).

  2. my computer hardware is recognized.  Blank CD disc and DVD are also recognized, but free space and used space is listed as 0 bytes.  I was unable to make a backup of the computer using the default System Tools, backup program.  Blank disc have not been rewarded.

  3. the other problem is with the delivered Sonic software pre-installed on my computer.  My software could not open and I downloaded the software Sonic of HP Support Download Center Web site.  The software downloaded, but I got an installation location for error and installation asked for a disc before continuing the installation.  The installation failed.

  4. I plan to try to do a full backup of a computer and possibly try to install the software installed previously loaded using the F11 key; If the software actually out there.

  5. I would appreciate your help.

  Danny Grantham

  Notes:

  1 Windows XP Media Center 2008 Eition
  2 S/N: {removed privacy}
  3 P/N: PF456AV

  Try the Fixit on the link of the page below

  http://support.Microsoft.com/kb/982116

• My Contacts from Windows Vista file has no control of import or export on the toolbar, and then I can not follow the Guide help to initiate the sequence of import. Does anyone know how to add the import function in the toolbar.

  Ideas:

  • Problems with the Contacts on Vista
  • No error message
  • Never used this feature before
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  The Contacts folder is sometimes forgotten how to display contacts, see if this helps:

  1. open Windows Contacts
  2. right-click anywhere in the right pane.
  3. Select "Properties" at the bottom of the list
  4. click on the tab 'Customize' on the 'Properties' page that opens.
  5. change the 'Type', 'Contacts' folder

  New Contact"and"Contact Group on new"button missing 
  
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com