Sequence of flat do not initiate

Similar Questions

• When I drag files in WMP the sequence of songs is not because it is in the list of files. the first certain tracks are at the bottom of the playlist

  When I drag music files in WMP and in the field of reading list, the sequence of songs is not as it should be determined in accordance with the list of files in Explorer windows, the first or the first few tracks are at the bottom of the playlis.
  For example when I drag the track 1 to 10 in WMP playlist could end up with the 4,5,6,7,8,9,10,1,2,3 sequence. It ranges from which follow playlist starts with, but the first track (s) (rare) is at the bottom every time.

  PS. Shuffle is not lit.

  Is not necessarily any indication of a fault as WMP does this, even when it is running correctly [he apparently gets files loaded in the order that they appear in the allocation table disk files].

  You can

  1 after dragging in the playlist, drag files to the top or to the bottom of the playlist in the desired order before you save the playlist.

  2 Allocate Index properties for each track before slipping as WMP then normally behave correctly when you drag them.

  3 you can also drag the in WMP individually to achieve the same end result.

• RH9 Windows 7 IE8 OCD and sequence of travel do not expand all topics

  Follow-up procedure Peter Grainge merge help in RoboHelp 8. RH9 installed earlier. Added new topics to the child project. Hung the keys to help programmers. New items appear for their screens. Customer noted that some topics (not all) would not increase the table of contents and browse sequence. It is not either /, they both expand or they do not.

  Browse sequence is based on the table of contents.

  Other subjects in and out of this project are synchronized with the table of contents and expand.

  I deleted the sequence through and based on the table of contents.

  I generated the parent and the child.

  I copied the whdata, whgdata and whxdata records of the mother and the child to the place appropriate to the server.

  Figured it out!  I had not created ID card for the subjects. I created the map ID and breadcrumbs and expanded TOC.

• Why a while loop does not start in a flat sequence if I have another loop running in a different sequence of flat?

  Hi all

  Basically, I'm in the order of many device and regulation for that pourpose, I created a sequence of plate to do. Also, at times I have start the potentiostat measures I use too, which follows a sequence and I created a second flat sequence to do this. In a part of my experience, I want to follow the voltage and current of high voltage power supply that is located in the flat main sequence and also read the results I'm getting with the potentiostat simultaneously.

  In the main sequence, there is a constant bollean which triggers the beginning of the secondary sequence. In the framework after it contant Boolean, I have a while loop in which I read 2 analog inputs of the power supply high voltage with my USB-6218 for awhile every 100 m, my problem is that the Boolean constant actually starts the subsequence flat but when it reaches a while loop in which I continue to read the results of the potentiostat , for a reason that the operation does not start until the while loop in the main loop is not finished.

  I communicate with the software of the potentiostat through a driver made by the manufacturer.

  Is it possible to read analog inputs with USB DAQ and simultaneously read the results of the potentiostat?

  Thank you very much

  Without being able to see the code, can only speculate. My guess is that you have probably some data flow to the second loop that depends on the first loop finish.

• Sequence structure flat inside the timed loop and execution order

  I have some problems trying to implement a flat sequence structure when you use a loop timed on a target of cRio VI

  I tried with or without the while loop around the structure of sequence flat, and I also tried to replace the 'Non-deterministic loop' with a timed loop

  The problem is that the program seems to run only once, then get stuck somewhere

  I am writing a program that performs the following operations as soon as possible:
  1. read the Pos_MC of entry on the FPGA
  2 send the value of Pos_MC to the VI target (on cRio CPU)
  3. calculate a value of output based on Pos_MC with a PID block ("exit PID')
  4. send 'PID output' to the FPGA
  5 write "PID output" analog output "MOOG".

  In addition, I want the program to return the measured value "Pos_MC" to a host VI for the recording of data

  So that the output of PID is calculated and sent to the FPGA as quickly as possible, I placed a flat sequence structure to ensure that it happens before you send the output to the nondeterministic loop for recording data

  Also, I want the digital input 'Stop' to be able to stop the loop deterministic (the timed loop)

  I read much more entries than that and the help of several PID and exit, but I rewrote the code for a single entry and exit to make it easier to illustrate

  Screenshot of the code is shown in 'target code.png' and 'fpga code.png.

  The VI themselves are attached in the next post (cannot attach files of more than 3)

  Question 1:
  Any advice on how to get this race? Thank you!

  Question 2:
  Is also my correct understanding in that, using this structure, each 0.9ms (fpga loop time) comes the following:
  1. the input ("Pos_MOOG") is read on the fpga
  2. the production of PID is calculated on the cRio with some delay to computation (for example 0.1ms)
  3. the output of PID is then written for analog output "MOOG" in all about 0, 1 - 0.2ms
  4. the FPGA program then waits until 0.9ms spent and repeat the process

  As opposed to the next pass whenever performing a loop is started on the FPGA:

  1. the FPGA reads the input and written on the output (the output of the execution of the previous loop PID)

  2. then the entry is sent the cRio, PID output is calculated and sent to the FPGA

  3. the new release of PID is maintained until the next time through the loop

  Thank you!

  PHG wrote:

  Thanks for the input guys, any advice as to how I could get the feature in scenario 1?

  I still say that the best route is just putting all the logic of the control in the FPGA.

  Other alternatives include 1) the use of DMA FIFO sedn data back or 2) use interruptions so that the FPGA code can not read the output level until the RT.

  DMA FIFOs are usually very limited, and I would not use them in this situation since I belive said it this code to do for the many outputs.

• How to control the execution of a sequence of flat have the Cancel button

  Hello
  I have a question for you guys.
  Suppose I want to write a program to control a set of materials by sending commands via a serial port
  In fact, he calls a 'round '. Because a series of specific commands will send via a serial port at once specific time. What I call one a time Cycle.
  Between each send command steps there is a delay (waiting in range of Timing). The joint part of my VI.

  I was wondering how I can integrate a Cancel button which is able to act in any image of the flat sequence Structure?
  As you can see it is not everything in loops to have the best control of the program because I want to run commands in the series only once.
  Where to put the button 'Cancel' in frames?
  I want to show a confirmation message when the user clicked the Cancel button, and if the answer was 'YES' LabvIEW stops running flat sequence Structure and of the specific procedure to cancel (which is not included in above VI) takes place. Otherwise (by clicking 'NO') program continues to run...

  Note that home is just a simple version of what I intend to

  For example in some frames, it will be a while loop and so on...

  But there will be only on flat sequence at all

  Excuse me for my bad English

  Hi mostafi,.

  General answer: convert your flat sequence in a correct state machine States!

  Now, you can check your "Cancel" button after each State is treated...

• What is the quick way to check if the battery current sequency contains nothing or not?

  Hi all

  I have switch from C++ to the labview in a short time before. I got a code written in labview 7 someone else and I am trying to change a code in my labview 2012. In the code, there are a lot of nested structures (like sequency battery, case, etc.). Some code contains 30 batteries but not all subsequences contains controls or code. Someone when I pass in a sequence, it seems empty, but some controls or code could be hiding somewhere beyond the current view. Thus, instead of zoom current sequency block, is that any quick way to identify if the block contains another type or not? Thank you.

  It is spelled "sequence".

  Make sure that autogrow is enabled for the sequence stacked so that you don't have the problem of the code hidden beyond the edges.

  Right-click on the stacked sequence and choose replace with flat sequence.  It will extend things, but how you can see all the pictures.

  Block diagram cleanup allows to get rid of more space and clean up the code.

  If you see empty images, you can right-click on the border between frames and select merge the images.  You should also do this if you have separate frames that should not be because there is already a data dependence that determines the sequence of operation.

• TO RESET THE GRAPH AND TABLE SEQUENCE EVEN STRUCTURE IS NOT EXECUTED.

  Hello everyone, I made this vi which runs automatically at the beginning and I can't use my power butoon to control this vi. Now, I want to clear the table and graph vi even when the structure of sequence is not executed as the start/stop button. And I want also when I run the program both the graph and the table should be cleared. I tried a lot of things, but as I'm new to labview I can't do. Thanks in advance.

  
  

• Engine.ReleaseSequenceFileEx (): modified sequence file handle is not released

  Hello

  Hello all

  I am facing a problem of leaking memory, basically, motor TestStand cache is not cleared. I have a file of main sequence calling a .NET dll. The dll has functions to remove the steps in the sequence "DestinationSequence" in "TXTModify.seq" and insert a new step in the same sequence after that. The operation is performed without flaw and I see that my "Modify.seq" TXT"file has been changed.

  After the transactions are made I am free the "TXTModify.seq" movie file handle by calling Engine.ReleaseSequenceFileEx () on the file of the modified sequence. But as soon as I close my TestStand sequence editor I get WARNING Debug (debug warning screenshot is attached). This waring should not seem like I already deleted my file handle of sequence of the TS engine cache by calling Engine.ReleaseSequenceFileEx ().

  Please help me get rid of this warning. Your generous help or suggestion will be appreciated.

  Thanks in advance.

  Concerning

  VDC

  PS: C# .NET source project so all the necessary sequence file are attached. You must keep the file in the sequence to a specific location (create the folder structure)

  Location of TXTModify.seq: \Source_Code\MemoryLeak_SupportFiles\TXTModify.seq d:\Core_ATE_application\Test_Executive_domain (TED)

  Location of HTMLModify.seq: \Source_Code\MemoryLeak_SupportFiles\HTMLModify.seq d:\Core_ATE_application\Test_Executive_domain (TED)

  VCC,

  VDC wrote:
  [...] After the sequence of closing TS editor I don't have memory leak problem, but I see that my sequence files are not changed. I'm completely subscript sequncefile has been changed. I have cross checked to see if I had the correct sequence file path, and path found was valid. [...]

  I'm enjoying what the leak memory has disappeared which is new good infact. On the other hand, I understand that your sequence is not changed. How do you check on that?

  You don't save any changes made to the file. If this is desired?

  You can check the behavior in a simple test:

  Create a new sequence file in the sequence editor, and then save it. Open (in parallel) for example, by default c#-User Interface installed with TestStand editor mode. Load the sequence file it.

  Now, it must be open in the sequence editor as well as in the user interface. In the user interface, add a new step of the action in the sequence. Please note the in the user interface, the file of the sequence is marked with a *-symbol which means there are unsaved changes. Switch to the sequence editor. You will see no change in the sequence.

  Switch to the user interface. Save the file in the sequence. The *-symbol will disappear.

  If you switch to the editor of sequence once again, you get will announce, that the movie file has been changed by an external process. You can now load changes in the sequence editor.

  Question: Is that what you see?

  hope this helps,

  Norbert

• Back to cache a sequence the old way. not in real time during the introduction of the cache

  Hi supports,

  I have problems of my sequences caching. As long the AE is always rendered images my reading is never in real time, it will be stutter audio until operations complete are cached. Makes me and my clients go nuts, so every time I want to playback of a composition, I manually turn off the audio, the cache of the sequence playing, which makes them note every time, "Oh a little slow" and "There is no sound" etc and I have to explain that his not playing not, just cached.

  I went back to the old way: Cache first before reading. The real-time playback + caching does not work...

  Also the 'working area of the Cache in the background "has disappeared... Why?

  And Im working on fast mac:

  CPU: 2 x 2.4 GHz Quad - Core Intel Xeon

  RAM: 48 GB 1066 MHz DDR3 ECC

  Boot SSD disk

  FusionIO Cachedisk

  My support is on a fiberstorrage Facilis (4K DPX real-time playback)

  If you have present clients, I totally recommend cache before play (like the old RAM Preview) option. Unfortunately, you can not have cache in the background (yet). I've linked the explanation in my response to your other post.

  Have you seen the preview videos or all the videos of NAB? The next version of AE wants to focus on the stability of playback, speed, etc. so it could get a little better. Acceleration using GPU for some effects (finally!) makes a big difference!

• Double sequence first cc does not

  Hiya

  for some reason any, I'm not able to right click and reproduce a sequence in a project, I am working on - I tried other projects and its fine, but just of course that I'm working now

  any ideas would be

  see you soon

  Suresh!

  Hello

  Create a new project in the first and import your original project in this new project.

  Kind regards

  Ilyes

• Editing in a single sequence is displayed does not correctly!

  I have a project to work with several sequences. In my first sequence all of a sudden the clips and side bars are not displayed, and it turns black. When I try to scroll to make smaller or larger, I maybe had the chance to see something. When I play videos that I can hear the sound and see the video in the other screen and as the timeline runs it will rebuild the display. I tried to change disk hard bites without change. Drivers are new and all other sequences are working properly anyway. But I have to make changes in this sequence and so it is almost impossible to work on the clips, when they are not displayed correctly.  Anyone who has solved this problem or have any idea what is the problem? Thank you much for the help. (Must admit that I am a beginner in PP)

  Hello

  I got exactly the same problem on several sequences of the mine, and it was very awkward. I tried as suggested above to export an XML sequences, and just clicking on "export final cut pro xml" restored the sequence correctly! In fact, I didn't have to export it. Strange but I am grateful that it worked.

  Tom

• Sequence of browser will not be displayed

  I have a problem once the .chm file is opened to see the sequence of browser. All of the suggestions. Assuming of course that this is the sequence of browser? I need it to appear in my prgram or .chm help file. With the help of Robphelp 8

  Open the pod project implementation through the view > pods > project configuration menu item. On top of this is the Windows section. If you develop it you'll find the windows used by your project. Double click on the one you specified in your single source CHM presentation. If your window looks nothing like my example, the changes that it has not been configured for use with CHM files. Come back if this is the case and we will tell you what to do.

• Source monitor always inserts clips at the beginning of the sequence, where ICT is not.

  Hello

  When you insert a clip from the source monitor using the shortcut keyboard or just right click the video in the monitor source and then "insert."

  the clip does not place when ICT is in the current sequence, it is always placed at the beginning of the sequence. If I insert directly from the project Panel that doesn't work and the clip is placed correctly.

  I have always worked with the hotkeys on the front like that, and I've recently upgraded to CS5. Is this a bug or something weird new CS5? Of course there are workarounds, but I'm sitting here with a few thousand clips ready to be assembled. All I have this problem or even better have a solution for this? Help much appreciated!

  I could be wrong, but I'm sure that the clips are not inserted to the ICT. but at the point of in.  If it's on the beginning, this is what is happening.  Cut and pasted clips are inserted to the CTI.

• Understand that with Apple TV if you sign up with flat would not load. But they are in charge of me via iTunes. Am I wrong?

  are you not suppose CBS stream free of charge if you have already paid through dish subscription

  If it's the same service, you won't have to pay again, that s right.