6215 suitability questions

Similar Questions

• Question Airport Express.

  I'm so confused. I'll try to keep a long story short. I lost my internet connection a few weeks ago, and instead blame Mediacom, I blamed my old airport of 12 years and I bought a new Airport Express Terminal (with a new ethernet cable to replace a at least 20 years. While the implementation of the new Terminal Airport Express, I was unable to get anything to work and finally called Mediacom. The problem was indeed at their end, where the cables to connect in the basement of my four-plex apartment.

  Now to cut to the Chase: given that I reproach myself my own equipment and not of Mediacom, I managed to set up two connections Airport Express (call Network1 and Network2). When I restart my computer, it connects inevitably to one or the other, but never the same. It connects only to those who, at the time, won't let me connect. So I turn to the other and all are well again. At the same time, when I get home, my iPhone will almost always automatically connect to the network which does not connect to the internet. It might work with Network1 while my computer only works with Network2. Same thing with my iPad. It is either 1 or Network2, but never both, and never the same. The three units can be on different networks at the same time for each group in order to connect to the internet.

  So my question (s):

  How can I remove one of the networks so that it completely disappears? There is apparently some kind of criss-cross current that confuses my computer and its peripherals.

  If I delete that which does not (at the time), I ALWAYS keep one connect correctly or I need to reset my Airport Express and start from scratch?

  I even does not start in the subject what a pain it was to connect my Tivo to my wireless network, because it works too only with one or the other. And I still have my printer wireless to set up.

  Help/suggestions/explanations are greatly appreciated. I've been using Mac and set up networks since the dark ages, but it left me speechless.

  The Airport Express should not have 2 networks unless you have enabled the guest network. Is it possible that your Internet router has a Wi - Fi network on it as well?

  I highly recommend you reset the default Airport Express Terminal and try again. It's really the only way you are going to get a suitable resolution.

  It is also possible that your network of old and new settings are still in iCloud keychain and causing some confusion.

  I would recommend you disable iCloud Keychain on each device, then make sure that you forgot the network name on each device.

  Recreate your wireless network (giving a new unused name so you can tell if it's all working), then log in to the network without wire on each device, one at a time, making sure the internet connection works.

  You can then re-enable iCloud Keychain if you wish.

  Good luck.

• How to attach a file to my question on the support of mozilla?

  I need to attach a file of about 800KB .pdf to my question on mozilla support so that those who want to help can understand and know in detail which is my real problem. How can I do?

  Try to use a free files hosting siteand download this PDF file. Then after the a hyperlink to this file to support contributors see.

  COR - el mentioned already, this forum only allows to image files. It is not setup for 'accept' other types of files.

  But as John mentioned, if your intention is for a discussion of adding the feature to create your own Firefox search engine, is not a subject suitable for this support forum. Suggestions for new or improved features for Firefox is best done through the submit comments...
  https://input.Mozilla.org/en-us/feedback

• iPhone 6 more issues of button "home" and turn off the questions

  I have two separate issues with my iPhone 6 more

  9.3.2 software (updated to try to solve this problem - question began before the software upgrade)

  My iPhone only more 6 works randomly.  I'm still able to make calls and use the phone, but the phone is constantly interrupted by these two questions.

  "Slide to turn off" or button 'Cancel' at the bottom

  (1) the phone asks me to "Slide to Power Off" - at the top of the button slide phone - with a cancel downstairs.  Slide and turn it back on does NOT resolve this problem.

  "Home" button is to take a screenshot of my current screen randomly.

  (2) when you press the button of my house, he takes a picture of my current screen instead of Act works as a home screen button.  This can happen 1 time or 10 times in a row before the home button functions correctly.

  Here is a screenshot of the camera to illustrate various photos taken.

  

  I did all the updates

  I did tap hard downs

  I backed up my phone and tried to reset to factory settings

  These are the questions randomly but are very common - a question of these two issues with caused during the use of the phone to navigate or "Slide to power off" appears randomly if the phone is not in use.

  Please help with any suggestions!

  Your sleep/wake button is pressed somehow. You have a form any case suitable for your phone that covers this button? If not, the sensor that presses the Sleep/Wake button against is missed ignition. As you even tried a factory restore, it may be clear that the problem occurs because of a case that is pressing the button somehow or the switch has gone bad.

• Windows 8.1 update questions about the Satellite P870 - PSPLFA

  Hello

  For the better or worse over the weekend, I downloaded windows 8.1 on a toshiba laptop (model PSPLFA p870) that was running windows 8. Graphics card is NVIDIA® GeForce® GT 630 M 2 GB with Optimus + Intel® HD Graphics 4000

  http://www.MyToshiba.com.au/support/computers/satellite/p870/psplfa-019001/specifications

  couple of questions:

  (a) I'm having some trouble to make windows 8.1 works fine on this laptop and cannot get/find new drivers on the toshiba site to properly adjust the video card.

  Any ideas how or where I can download video drivers that are suitable for this laptop?
  Too eager not to uninstall and go back to windows 8, now that I went that day...

  I have a call yesterday with microsoft yesterday which seems to go nowhere to fix one or two other things after this upgrade.

  (b) on the windows 8.1 machine my internet connection when running IE11
  seems now a little flaky and suspect that it is a matter of 11/windows 8.1 internet explore (other laptops on my wireless network running windows 7 and XP work fine and do not abandon their studies and can access all the info I can't get on the machine win 8.1) which seems to be a bit a common issues by looking at some other forums and

  (c) I can't download or open files from google docs (screen freezes right most of the way through the download) on the 8.1 update windows machine.

  Any help appreciated,
  Ken

  Hello

  Your laptop belongs to the PSPLFA series. This series was released in Australia

  The same notebook PSPLFE series is available in Europe.

  On the page of the Toshiba UE driver you will find all drivers update 8.1 Win
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  _Importnat: _ the Win 8.1 drivers must be installed in the right order!
  Check the instructions for installation, which is available in the list of drivers too and follow exact order!

• Satellite A300 1lW - installation of Windows 7 - any questions?

  Good morning/afternoon!

  I would like to install a new internal hard drive on my laptop and I want to put windows 7 on it.

  The problem is that it is the first time that I'm going to do this and I Don t really know what kind of functionality will be incompatible with this installation.

  -You can recommend me a version of windows 7 that may be suitable for this laptop?
  -What features will be disabled when I install windows 7 on my new hard drive?

  Thank you very much!

  Concerning

  Remy

  Hi mate

  To be honest I wonder about these questions.
  Windows 7 is fully supported and normally you should get no problems with Windows 7 running on Satellite A300.

  The Windows 7 drivers are available on the page of the Toshiba UE driver. T
  for this I put t expect serious problems.

  If you have any questions, feel free to ask the people here in the community. :)

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• G25-AV513: Questions about the use of this device

  I recently bought the Qosmio G25-AV513 but it was an open box, so I went back there and has been convinced, it was beautiful... so I started to set up at home and low and behold... bad pixels. So I went back and asked when would happen more... and I was told no more are regular and doubtful if they will be. But they have another oped model that runs like new...

  So the question I have. I'll buy this mainly for use high game... dunno if I should adjust for this model... now that I know, that a newer version came in the second week of January... but if it is not suitable for use games and audio/video I lost out on the G25.

  All recommendations... ?
  Do you think that this new model would be the next progression or and a good bet... or just different and not worth risking the g25 on.

  Hello Kerry

  Of course, you have an American machine and the hardware configuration is not known to me. The fact is that each new unit has especially more recent pieces of material (more MB on graphics card) or more of RAM. Qosmio G20 G25 United States is a great unit. A friend of mine has one and the game works fine.

  In my view, you can compare your device with a newer version, but if you like playing games, in my opinion, the G25 is the right one.

  Good bye

• HP Pavilion 6653w "imminent hard drive failure! "Backup and replace. Questions.

  Hello, I have a HP Pavilion 6653w with Windows 7 Home Premium desktop computer.   It is 4 to 6 years old.  Recently, when I start it, I get a message "imminent hard disk failure!  Please save and replace as soon as possible."  I've never had to replace a hard drive before, so I have some questions:

  1 should. what type of disc do I replace - be of the same type that I have now?  (Hitachi, 1 TB).   Is there a list somewhere that shows which drives are not suitable for my computer?

  2 - is a mechanically inclined person (my husband) could do at home, or that it does not require a professional?  My husband has replaced a front memory card, we just request if it is similar to the one in trouble?

  Thank you!

  http://support.HP.com/us-en/document/c01315257

  This link will take you to a document on the withdrawal and the replacement of a hard drive on a HP or Compaq desktop computer.  If it is not identical to your case, it will be a little similar.  The point is, that it is not terribly difficult; This is something you might be able to tackle yourself, or with a friend who has some experience with computers.

  I hope this helps.

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)

• A few questions about the management of the partitions when you perform a recovery

  Hello everyone,

  I bought a L505-13Z on weeks there are for personal use and editing of audio work light. In these two weeks, I took the time to explore and test the performance of this computer and judged suitable for my needs because it resists even havier audio work so I'll need, what it is tested. I am really satisfied with this laptop! In any case, some optimizations I did for audio software suffered a few necessary features of the computer, so I need to reinstall the operating system... Basically, I was always used to install only the system drive wiping system, leaving the score of "D: Data" intact. I noticed that this is not the case with the recovery of the system, because after the restoration, system partitions and data disappeared. of course everything is saved on an external drive, but every time I have to restore, I need to copy everything back from the backup drive? I missed the point of this - it's exactly like having all my data saved on the system partition. What, then, is the need for the data partition?

  Is there a way to recover and leave intact the partition 'Data'?

  My second question is if it is possible to change the size of the partitions somehow? I think it's a bit pointless to have 230G of free space for the system partition. 100G is sufficient for my needs, and I could use the 130G remaining for the data partition, I don't know why the drive is simply divided into two by default... (I am aware that a change of size of partition must erase all data on the disk).

  Thank you all in advance for any help!

  If you use the procedure of recovery disc HARD - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm - structure and the data on the second partition will not be deleted.
  So, if you want to install OS using HARD drive recovery option you can move all the important data of the C partition to D partition.

  The whole HARD disc will be deleted if you use recovery DVD for installing the OS.
  ----------------------------------------------------------
  You should not change the partition structure because it can have a negative influence on the recovery procedure more HARD drive. It can happen that data recovery will be will be more found.

  Please note: second partition D is not a kind of system partition or recovery. This is normal and usual HARD disk partition. He is saved just Toshiba recovery image in the folder called HDDRecovery.
  You can do it, I did too, it is better to enter the properties of this file and set it as invisible.

  You will not be irritated by this file. It's there, but you can not see and there is no way that you can remove it somehow. Use this partition as usual. Create own folders, copy data here, just do your usual work.

  Any other questions?

• Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

  Hello.

  I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

  I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

  The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

  Why the Sun Java Runtime Environment is necessary?

  I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

  Thanks in advance if anyone is able to help.

  Kind regards

  John

  Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

  Satellite Pro P100 (PSPAEA)

  Chipset: Mobile Intel (r) 945 PM Express Chipset
  Memory controller: 82945 PM
  I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

  What I installed...

  03 - display Driver
  04 chipset Driver
  05 - network - upgrade Ethernet driver
  06 - network wireless driver
  09 - sound Driver
  10 - driver CardBus controller with UltraMedia
  12 - modem Driver
  13 - modem region Select utility
  14 Bluetooth Stack
  15 - Bluetooth monitor
  17 Hotkey Utility
  21 - SD Secure Module
  22 - SD memory card format
  28. DVD-RAM driver software
  33 user manual
  TOSHIBA fingerprint digital-software (from Vista drivers)
  TOSHIBA-disk-Creater (from Vista drivers)

  What I do not installed...

  01 - Microsoft Updates (I used Windows Update to do this)
  02. Sun Java Runtime Environment
  07. customer Intel utility
  08 Atheros Client Utility
  11 - touch pad Driver
  16 - C - infrared driver
  18 YPP/power button Utility
  19 utilities
  20 - buttons
  23 - assist
  24 - ConfigFree
  25 - zoom utility
  26 PC Diagnostic Tool
  27 CD/DVD Drive Acoustic Silencer
  29 WinDVD Creator
  30 - RecordNow
  31 DLA
  32 - DVD player

  Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

  The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

  With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

  Hope this helps and please post your results as it is good to share their experiences.

  Regards, Rob

  PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

• USB-6215 DI ReadMultisamplePortByte rate is only 2 kHz

  I'm trying to use the USB-6215 for determine the speed and direction of a fan with two optical sensors. I use the following code in a .NET library to get 1000 samples of two lines and use the data when optical sensors are enabled to determine the speed and direction.

  using (Task ctr0 = new Task())
  {
    using (ctr0.DIChannels.CreateChannel("usb6215/port0/line1:2", "", ChannelLineGrouping.OneChannelForAllLines))
    {
      ctr0.Stream.Timeout = 500;
      DigitalSingleChannelReader dReader = new DigitalSingleChannelReader(ctr0.Stream);
  
      try
      {
        // Start the task
        ctr0.Start();
        byte[] results = dReader.ReadMultiSamplePortByte(1000);
        ctr0.Stop();
      }
      catch (DaqException e)
      {
        Console.WriteLine("DAQ Exception: " + e.Message);
      }
    }
  }
  
  // Analyze sample data and calculate speed/direction
  //...
  

  It seems to work fine, except for one thing: the samples seem to only take at 2 kHz. This means that to some rpm, the acquisition of data sometimes will lack one optical sensor being activated. According to the datasheet, the USB-6215 is a sampling frequency maximum of 250 kech. / s, and looking through some other threads, this rate is divided by the number of channels you are sampling (i.e., samples of two channels gives you a rate of 125 ksps / s for each channel). My question is, why my sample notes so low, and how can I taste at a faster rate?

  Sheet indicates that the rate you quote is for the analog input. It clearly states that the digital I/o is a programmed software and you have the chance to see 2 kHz. The max with a timing of software is usually around 1 kHz.

• HP envy15t ae100: Question for HDD Upgrade

  Hi, I bought your product (HP envy15t ae100, i7 6700hq with hd530, display UHD)

  I chose 1 t byte for the hard drive. However, I want to replace personally to the ssd.

  There are several types of ssd such as SATA II, SATA III, M-Sata and ssd M2. But I do not know what type of ssd is suitable for my product.

  Thank you.

  Hi @jihaseo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15-ae100 Notebook and concerns with the replacement of the HARD disk. Here is a link to your manual page 55 for drives that would be compatible with your laptop.

  SATA drives are what is supported on your computer notebook page 112 in the manual.
   
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• c:\windows\system32\vsinit.dll question prevents the activation of XP

  A malware attack left a mess on my machine and anit-virus tools cleaned most, but many services were lost. Advice on the web says to reload XP.  I did, but the activation step failed due to a problem with the license with c:\windows\system32\vsinit.dll.  The DLL is in place and apparently comes to ZoneAlarm, but most likely has been charged as part of another package (perhaps by malware?).  There are two registry entries that refer to c:\windows\system32\vsinit.dll.  My question is, can I change the registry references to c:\windows\system32\vsinit.dll and thus enable the XP activation process to proceed?

  The instance that is more suspect is

  HKEY_LOCAL_MACHINE-1-5-18\Components\913979572FD8B4D4989DEDA591E6AB3D

  If not, is there another solution to this problem, which is more suitable?

  Hi jimTheFlutist,

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx