c:\windows\system32\vsinit.dll question prevents the activation of XP

Similar Questions

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• Failed Validation of XP - Client4.6 - cvpnd.exe for C:\Windows\system32\vsinit.dll

  Windows XP Home SP2 - booted fail with the "attention 201. VPN required subsystem is not available. Unable to connect to a remote VPN server. "According to the documentation Cisco it said to reinstall the Client.

  I uninstalled the old client and reinstalled v4.6 and now the C:\Program Cisco Systems Client\cvpnd.exe (which is the Cisco Systems, Inc. VPN Service) fails on startup with the following error message: failed Validation of C:\Windows\system32\vsinit.dll

  I completely uninstalled and reinstalled the client, always VPN service not start and get the same error message. If I try to start it manually I get the same error message.

  Clues about where to look?

  Here is some info that I found from this URL:

  http://Forum.zonelabs.org/ZoneLabs/board/message?board.ID=inst&message.ID=24113#M24113

  Even if you do not use the product of Zone Alarm, I think you need to follow these steps anyway. Try it and tell me how it proceeds.

  Here is the content of the message:

  Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. click on start and then click Run.

  2. in the Open box, type cmd and then click OK.

  3. at the command prompt, type the following commands, pressing ENTER after each line:

  Note Click OK if you are prompted.

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  regsvr32 softpub.dll

  regsvr32 /u wintrust.dll

  regsvr32 /u initpki.dll

  regsvr32 /u dssenh.dll

  regsvr32 /u rsaenh.dll

  regsvr32 /u gpkcsp.dll

  regsvr32 /u sccbase.dll

  regsvr32 /u slbcsp.dll

  regsvr32 /u cryptdlg.dll

  regsvr32 /u softpub.dll

  output

  4 restart your computer.

  5. Click Start, run, type cmd in the Open box, and then click OK.

  6. at the command prompt, type the following commands (press ENTER after each command).

  Note Click OK if you are prompted.

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  regsvr32 softpub.dll

  regsvr32 wintrust.dll

  regsvr32 initpki.dll

  regsvr32 dssenh.dll

  regsvr32 rsaenh.dll

  regsvr32 gpkcsp.dll

  regsvr32 sccbase.dll

  regsvr32 slbcsp.dll

  regsvr32 cryptdlg.dll

  regsvr32 softpub.dll

  output

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• OK to remove c:\windows\system32\uiautomationcore.dll to solve the CTD of Flight Simulator?

  A large number of users of Microsoft Flight Simulator in Windows 7 seems to be having the same problem, which crashes to desktop. In the thread following the removal of c:\windows\system32\uiautomationcore.dll has been proposed as the "solution" to this problem: http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/fb1808ff-92f0-478b-9826-f2ed6fbeae97

  Assuming that it is indeed the case, is it possible with impunity? (or at least with acceptable suffer, keep in mind that a lot of people have invested a lot of time and efford - and money - in Flight Simulator).

  You can rename it, and if you have any problems, then name again.
   
  Steve
   
  "PeterBDa" wrote in message News: 405ee0e1-30e8-4e61-a4a1-5ab2d7478cfc...

  No, the c:\windows\system32\uiautomationcore.dll is part of Windows and should not be deleted or modified.

  I appreciate it. However its seems that various people (many?) removed, and their system keeps going (and still works for Microsoft Flight Simulator), so this is appararently not essential. The consequence of not removing no seems to be not being able to use an application that you may have bought the computer to use in the first place. I hope that a response with a nuance more is possible.

• I get a message 'windows\system32\palowibe.dll' for all the exe. files. I fixed the directory and tried to restore to an earlier date, but this fails__

  failure of the system restore

  mmattison,
  From what I found, it seems that there is a file attached to a virus\malware.  You attempt to clean your system to get rid of this problem.  This thread covers the ways to eliminate the malware\viruses.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• get an exception occurred while trying to run C:\WINDOWS\System32\shell32.dll.Control_RunDLL appwiz.cpl «»

  Original title: continue to get an exception has occurred

  An exception occurred while trying to run "appwiz.cpl C:\WINDOWS\System32\shell32.dll.Control_RunDLL . The other question is one that I posted yesterday that being to keep the screen with Oxffbadd11 seems to know one had this problem as one of soaps still responded to this post

  Hello

  1. don't you make changes on the computer before this problem?

  Please wait for the response from Microsoft support engineer for the number that you have posted here.

  Run the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:
  sfc/scannow

  Reference: http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• "c:\windows\system32\dbghelp.dll" "not designed to run on windows or it contains an error.

  Original title: c:\windows\system32\dbghelp.dll

  In the few weeks whenever I turn on my computer, try to save a document in Notepad or listen to music on windows media player, I get this error message "bad image" which appears again about 5 times in a row until it disappears eventually.

  "c:\windows\system32\dbghelp.dll" "not designed to run on windows or it contains an error" he cites that< a="" lot,="" i="" don't="" know="" how="" to="" stop="" this...="">

  Another question is, apparently, that my Security Center is turned off, but when I try to turn it on, nothing happens - no windows/web page opens. The two are related?

  How can I fix these problems?

  Hi Pyrcia,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: You can check the status of the Security Center service.

  a. Click Start, type services.msc in the search bar and press ENTER.

  Note: If UAC (User Account Control) window is prompted for permission to continue, please click on continue.

  b. double-click the Security Center service and switch to the general tab.

  c. change the startup type to automatic, and then click on apply.

  d. Click Start, and then click OK.

  Step 3:

  You can also check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Hope this information is useful.

• c:\windows\system32\nvcpl.dll at startup error.

  I get a c:\windows\system32\nvcpl.dll on Win 7 start up. How can I remove it please?

  Please advise?
   
  Original title: c:\windows\system32\nvcpl.dll error

  Hello Clive,.

  Thanks for choosing Microsoft Community.

  What is the complete error message you get?

  C:\windows\system32\nvcpl.dll corresponds to the NVIDIA drivers or any NVIDIA product. While the research with the Dll file that I fell that this could occur when drivers are not updated or if they are damaged.

  You can try the following methods and check if it works:

  Method 1: turn on the computer in start state clean and check to start the giving questions.
  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135     
  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:
  You can uninstall the card readers NVIDIA graphics and the software of the system and then download the driver and see if the problem is resolved.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

   
  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• c:\windows\system32\mstask.dll

  This file is not mounted and creating problems with other software

  How can I solve this problem.

  Hi Michel,.

  1. What exactly is the problem you encounter when you say "questions of creation with other software?
  2. Get you any error message are c:\windows\system32\mstask.dll? If Yes, when and what is the full error message?
  3. Since when are you facing this problem? Have you made changes on the computer before this problem?
  4. Why do you say "this file is not installed?  Check in the System 32 folder?

  C:\windows\system32\mstask.dll comes from the software you have installed on your system. As most applications store data in your system registry, it is likely that your registry database suffered from fragmentation and accumulated invalid entries that may affect the performance of your PC.

  Method 1:

  You can perform a clean boot.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 in the above article.

  Method 2:

  I suggest that you scan your computer using antivirus installed on your computer or if necessary use the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Please post back with the State of the question.

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• "The Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image" Windows Live Mail - Error Message

  When you use Windows Live Mail, whenever I try to open an e-mail that I receive the following error message: the Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image.  What can I do about it?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Error when you click icon: the application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image.

  Not a Windows image is valid. Help!

  At the start of my PC, and whenever I click on any icon I get the error message:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  At the start there are several, each with a file name of a program in the blue bar, i.e. "firefy.exe - bad Image" followed by the above statement. After you click the only option, 'OK', the system works well, but the message will continue to re appear after clicking on any icon on the desktop or the start menu.

  I need help with the removal of this question. I have not installed or run new programme before the start of last week. Thank you.

  3/15 - installed, updated and ran Ccleaner and Malwarebytes. Restart the pc after a successful run of each. Same question:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  Help please. Thanks in advance.

  CRR
  E-mail address is removed from the privacy *.

  Hello RRC633,

  I suggest that see you if you have corrupted system files.

  Click Start
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files. It may take some time to run.

  Reboot your system.

  The KB Article ID: 310747 - Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  If that comes back without any problems of integrity, then I would check the event viewer for errors in the application or system event logs.

  The KB Article ID: 308427 - how to view and manage the event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Please answer back with an update.

  Marilyn

• Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

  error urgRLfgh.dll

  Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

  Thank you

  Andrea

  Hello

  1. Once you get this error message?

  2. did you of recent changes to the system before the show?

  Please provide more information on the issue to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Meanwhile, I suggest you perform the methods mentioned below and check if it helps.

  Method 1:

  Follow the link below and check if the problem persists in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 3: perform a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  Let us know if it helps.