6225 NaN errors

Similar Questions

• Quiz results slide - NaN errors in published Captivate 8 content

  Hello

  I worked on a number of modules with different content in each, which have a short quiz at the end. All except a beautiful work and the quiz results slide displayed correctly the 'score' and 'max' accordingly.

  However, I have a module with an erroneous result reported "0" out of "NaN" and I don't know why it appeared suddenly?

  I have been a model for these modules (even if it is true that it has been outsourced - they should always use the same model)

  I don't see any obvious difference in the parameters or results between this slide and the other modules - so I'm stuck!

  I was wondering if something had gone wrong with the slide therefore results as a test, I copied all the slides except the quiz in a separate model that has worked very well, and then updated the quiz and slides re-edited, still had the same error. This leads me to suspect the content slides are part of the problem. There are some real questions in the content slides / false, which are defined as a "pre-test" type - could these affect something?

  I am using Captivate 8.0.3.290 and I checked the result published scorm cloud and our Moodle LMS - same erroneous result.

  I hope someone can help?

  Thank you

  Jon

  It is difficult to know what is the problem with this model. I highly doubt that the presence of pre-test slides is the cause. It is perfectly possible to have a pre-test and a Final Quiz in a project. To exclude this possibility: try to create a small project with a test question and a real Question slide, using this same model.  Follow the system variable. What is the result?

  You know if this model was created initially to CP8 or is this a version update of a model?

  I never delete the review area, although it is used in two circumstances:

  1. For the message of pass/fail on the Score slide
  2. When a question has been ignored (I always feel that issues are considered to be ignored).

• Remove NaN error message

  Is there a way to get acrobat to NOT display the "NaN" in a field?  I just it empty if the formula has a problem.

  Yes, you will need a script. You get that is because you are attempting to division by zero when the field is empty, which gives a result which is not a number. Therefore, test the denominator. The custom calculation script may look like:

  (function () {
  
      // Get the field values, as numbers
      var v1 = +getField("A").value;
      var v2 = +getField("B").value;
  
      if (v1 !== 0) {
          event.value = 100 * (v1 - v2) / v1;
      } else {
          event.value = "";
      }
  
  })();
  

• Unexplained error "NaN".

  Hello

  I was changing an existing script to customize for my application.  I'm running into an error that I do not understand:

  "Not enough parameters label were selected.

  See red text in the code below for in such cases.  Thanks for your help.

  ///////////////////////////////////////////////////////////////

  //

  Script of numbering batch (Actions) of the document (e.g., marking)

  by Thom Parker, WindJack Solutions, Inc.  October 2010

  www.windjack.com, www.pdfscripting.com

  Of Adobe Systems Inc., www.adobe.com

  //

  NOTE: This JavaScript code is designed only for use in a

  "" "" Action script (batch sequence). "" "  It will not work

  within a document/form field or script as a script folder level.

  //

  This script displays a popup menu dialog custom for each file operated by Action

  The user enters information on the way in which the numbers of the documents must be applied to the

  pages of a document, for example, position, content, etc..  As well as information on whether or not

  the script must save the file or extract the pages labelled in a separte document

  These parameters are maintained during any of the Acrobat Session.

  //

  A document number is included in the parameters. This number is incremented each time

  a file is operated.

  //

  The options are included to jump the document current and for the abandonment of the sequence of actions

  //

  Custom dialog box created with AcroDialogs of WindJack Solutions, Inc.

  //

  Version 1.4-7/1/16

  Amended by SCS

  Label width

  var nLabWidth = 2000;  //

  Line height

  var nLabLineHeight = 8; //

  If (typeof (global. (DocNumAction) == 'undefined')

  {

  Acrobat JavaScript dialog box

  Created by DialogDesigner of WindJack Solutions

  < CodeAbove >

  var oDocNumTypes = {}

  'Exposure': {Prefix: "[COMPANY NAME] \r\ [FEI #] \r\EXHIBIT \r\[DATE RANGE] [ACRONYM]", UseDocNum:true, UsePgNum:true, PagePrefix: "-Page" ""},

  'Attachment': {Prefix: "[COMPANY NAME] \r\ [FEI #] \r\ATTACHMENT \r\[DATE RANGE] [ACRONYM]", UseDocNum:true, UsePgNum:true, PagePrefix: "-Page" ""},

  "Memo": {Prefix: "[COMPANY NAME] \r\ [FEI #] \r\[INV/SUPV + MEMO DATE] \r\EXHIBIT [ACRONYM]", UseDocNum:true, UsePgNum:true, PagePrefix: "-Page" ""},

  "Sample": {prefix: "[SAMPLE #] \r\[COLLECTION DATE] \r\doc #", UseDocNum:true, UsePgNum:true, PagePrefix: "-Page" ""},

  };

  function DoSetDocNumberFn (dialogue, oDlg)

  {

  var oRslt = dialog.store ();

  var strExample = oRslt ["LPfx"];

  If (oRslt ["so"])

  strExample += oRslt ["DNum"];

  If (oRslt ["PgNm"])

  {

  strExample += eval ("'" + oRslt ["PPfx"] + "" "") + (oDlg.nCurPage + 1) m:System.NET.SocketAddress.ToString ();

  If (oRslt ["PPsf"])

  strExample += 'of' + oDlg.nNumPages;

  }

  Dialog.Load({"ExMP":strExample});)

  DoSetFileName (dialog, oDlg);

  }

  function DoSetFileName (dialogue, oDlg)

  {

  var oRslt = dialog.store ();

  var strFileName As String = "";

  If (oRslt ["SPst"])

  {

  Add the prefix

  strFileName += oRslt ["SŠPR"];

  Add number

  If (oRslt ["DnPr"])

  {

  strFileName += oRslt ["DNum"];

  If (oRslt ["so"])

  strFileName += "_";

  }

  Add the file name

  "strFileName += oDlg.strFileName.replace(/\.pdf/," ");"

  Add number

  If (oRslt ["DnFx"])

  {

  strFileName += oRslt ["Dnum"];

  If (oRslt ["so"])

  strFileName;

  }

  strFileName += ".pdf";

  }

  Dialog.Load({"SvFl":strFileName});)

  }

  < / CodeAbove >

  overall. DocNumAction =

  {

  result: "Cancel."

  DoDialog: function() {return app.execDialog (this);};

  strHorzPos: "PosR."

  nMarginX: "0.5"

  strVertPos: 'PosT',

  nMarginY: "0.5"

  "strLTyp",:

  strBackgroundCol: ['Transparent'],

  "strExmp",:

  strLabelPrefix: '\r ',.

  bIncludeDocNum:true,

  strInitDocNum: "1."

  bIncludePageNum:true,

  "strPageNumPrefix",:

  bPageNumPostfix:true,

  strBoxStateSel: "Fltn."

  strPgRangeSel: "rAll,"

  "strStrtPg",:

  "strEndPg",:

  bSaveWPostFx:true,

  "strSavePrefix",:

  strDocNumInName: "None."

  "strSavePostfix",:

  "strSvFl",:

  {GetRadioSel:function(oRslts,aCtrls)}

  for (var strRtn = aCtrls [0]; aCtrls.length > 0; strRtn = aCtrls.pop ()) {}

  If (oRslts [strRtn] is true)

  Return strRtn;

  }

  Return ' ';

  },

  SetListSel:function(list,path) {return if(path.length == 0);

  eval ("list [------" "+ ((typeof path.join!]") = "function")? {("[(chemin: path.join("\"][\"")) + ' \ '] = 1")},

  {GetListSel:function(oLstRslts,path)}

  for {var (topic oLstRslts)

  If (((typeof oLstRslts[item]=="number") & & (oLstRslts [point] > 0)))

  || This. GetListSel (oLstRslts [item], path))

  {(point) path.push; return true ;}}

  }

  Returns false;

  },

  nCurPage:0,

  nNumPages:1,

  bHidden:true,

  SetDocNumber:DoSetDocNumberFn,

  SetFileName:DoSetFileName,

  strFileName: "Test.pdf"

  oDocNumParams:oDocNumTypes,

  initialize: function (dialog)

  {

  var listLTyp = new Object();

  This. SetListSel (listLTyp, this.strLTyp);

  var listBkgd =

  {

  "Transparent":-1,.

  'Yellow':-1.

  'Green':-1.

  'Blue':-1.

  'Grey':-1.

  };

  This. SetListSel (listBkgd, this.strBackgroundCol);

  var dlgInit =

  {

  'MrgH': this.nMarginX,

  'MrgV': this.nMarginY,

  'Bkgd': listBkgd,

  "DNum": this.strInitDocNum.

  "SPst": this.bSaveWPostFx.

  'Exmp': this.strExmp,

  'LPfx': this.strLabelPrefix,

  "So": this.bIncludeDocNum.

  "PgNm": this.bIncludePageNum.

  "PPfx": this.strPageNumPrefix.

  "PPsf": this.bPageNumPostfix.

  "tFPg": this.strStrtPg.

  "tTPg": this.strEndPg.

  'SŠPR': this.strSavePrefix,

  'Pressure': this.strSavePostfix,

  "SvFl": this.strSvFl.

  };

  dlgInit [this.strHorzPos] = true;

  dlgInit [this.strVertPos] = true;

  dlgInit [this.strBoxStateSel] = true;

  dlgInit [this.strPgRangeSel] = true;

  dlgInit [this.strDocNumInName] = true;

  Dialog.Load (dlgInit);

  () Dialog.Enable

  {

  'tTPg': false,

  'tFPg': false,

  'PPfx': false,

  'DNum': false,

  }

  );

  var typeInit = {};

  (XX in this.oDocNumParams)

  typeInit [xx] = - 1;

  If ((this.strStrtPg == «») | isNaN (this.strStrtPg) |) (((This.strStrtPg) Number > This.nNumPages))

  {

  If (this.bHidden)

  this.strStrtPg = "1";

  on the other

  this.strStrtPg = (this.nCurPage + 1) m:System.NET.SocketAddress.ToString ();

  }

  If ((this.strEndPg == "") |) isNaN (this.strEndPg) | (((This.strEndPg) Number > This.nNumPages))

  this.strEndPg = this.nNumPages.toString ();

  exInit var = {'LTyp': typeInit, "tFPg": this.strStrtPg, "tTPg":this.strEndPg, 'sOfN': ' of ('+ this.nNumPages +') ',}

  "MNLF": "current file:"+ this.strFileName;} '.

  If (this.bHidden & & this.strPgRangeSel == "rCur")

  {

  this.strPgRangeSel = 'rAll;

  exInit ['rCur'] = false;

  exInit [this.strPgRangeSel] = true;

  }

  Dialog.Load (exInit);

  exInit var = {"ExPg":this.strPgRangeSel == "rFro", "DNum":this.bIncludeDocNum, "PPfx":this.bIncludePageNum,}

  "PPsf":this.bIncludePageNum, "MrgH":this.strHorzPos! = "PosC", "MrgV":this.strVertPos! = "PosM,.

  ""SvPs":this.bSaveWPostFx," SvDn ":this.bSaveWPostFx.

  "tFPg":this.strPgRangeSel == 'rFro', ' tTPg":this.strPgRangeSel =="rFro"," rCur"{:! this.bHidden};

  Dialog.Enable (exInit);

  This. SetDocNumber (dialogue, this);

  },

  validate: function (dialog)

  {

  var oRslt = dialog.store ();

  If (oRslt ["so"] & & ((oRslt ["DNum"] == null) |)) (oRslt ["DNum'] == ' ') | isNaN (oRslt ["DNum"])))

  {

  App.Alert ('If selected, the initial value for Doc number must be filled with a valid integer");

  Returns false;

  }

  If ((/^\s*$/).test(oRslt["LPfx"]) & &! oRslt ['so'] & &! oRslt ["PgNm"])

  {

  App.Alert ("not enough label settings have been selected");

  Returns false;

  }

  If (oRslt ["rFro"])

  {

  If ((oRslt [«tFPg»] == «») | isNaN (oRslt ["tFPg"]) |) (oRslt ["tTPg'] == ' ') | isNaN (oRslt ["tTPg"]))

  {

  App.Alert ("If selected, the Page range values must be entered with valid integers");

  Returns false;

  }

  If ((oRslt ["tFPg"]) Number > Number (oRslt ["tTPg"]))

  {

  App.Alert ("" If selected, page number must be less than the number page "");

  Returns false;

  }

  If ((Number (oRslt ["tFPg"]) > this.nNumPages) |) (((ORslt ["tTPg"]) Number > This.nNumPages))

  {

  App.Alert ("" If selected, From and the page numbers must be less than the number of pages "");

  Returns false;

  }

  }

  Returns true;

  },

  commit: function (dialog)

  {

  var oRslt = dialog.store ();

  this.strHorzPos is this. GetRadioSel (oRslt, ["PosL", "PosC", "PosR"]);

  this.nMarginX = oRslt ["MrgH"];

  this.strVertPos is this. GetRadioSel (oRslt, ["PosT", "PosM", "PosB"]);

  this.nMarginY = oRslt ["MrgV"];

  path of var = new Array();

  this.strLTyp = (this. "GetListSel (oRslt ["LTyp"], path))? path.reverse ():" ";" "

  path of var = new Array();

  this.strBackgroundCol = (this. "GetListSel (oRslt ["Bkgd"], path))? path.reverse ():" ";" "

  this.strExmp = oRslt ['Exmp'];

  this.strLabelPrefix = oRslt ["LPfx"];

  this.bIncludeDocNum = oRslt ["so"];

  this.strInitDocNum = oRslt ["DNum"];

  this.bIncludePageNum = oRslt ["PgNm"];

  this.strPageNumPrefix = oRslt ["PPfx"];

  this.bPageNumPostfix = oRslt ["PPsf"];

  this.strBoxStateSel = "Fltn.

  this.strPgRangeSel is this. GetRadioSel (oRslt, ["rAll", "rCur", "rFro"]);

  this.strStrtPg = oRslt ["tFPg"];

  this.strEndPg = oRslt ["tTPg"];

  this.bSaveWPostFx = oRslt ["SPst"];

  this.strSavePrefix = oRslt ["SŠPR"];

  this.strDocNumInName is this. GetRadioSel (oRslt, ["None", "DnPr", "DnFx"]);

  this.strSavePostfix = oRslt ['pressure'];

  this.strSvFl = oRslt ["SvFl"];

  },

  "Abrt": function (dialog)

  {

  Dialog.end ("ABRT");

  },

  'Skip': function (dialog)

  {

  Dialog.end ("Skip");

  },

  'Pressure': function (dialog)

  {

  This. SetFileName (dialog, this);

  },

  'DnFx': function (dialog)

  {

  This. SetFileName (dialog, this);

  },

  'DnPr': function (dialog)

  {

  This. SetFileName (dialog, this);

  },

  'None': function (dialog)

  {

  This. SetFileName (dialog, this);

  },

  'SŠPR': function (dialog)

  {

  This. SetFileName (dialog, this);

  },

  "SPst": function (dialog)

  {

  Good var = dialog.store (["SPst"]);

  Dialog.Enable ({"Pressure": good, "SvDn": good});

  This. SetFileName (dialog, this);

  },

  'tTPg': function (dialog)

  {

  var x;

  },

  'rFro': function (dialog)

  {

  Dialog.Enable ({tFPg:true, tTPg:true, "ExPg": true});

  },

  'rCur': function (dialog)

  {

  Dialog.Enable ({tFPg:false, tTPg:false, "ExPg": false});

  },

  "rAll": function (dialog)

  {

  Dialog.Enable ({tFPg:false, tTPg:false, "ExPg": false});

  },

  'PPsf': function (dialog)

  {

  This. SetDocNumber (dialog, this);

  },

  'PPfx': function (dialog)

  {

  This. SetDocNumber (dialog, this);

  },

  'PgNm': function (dialog)

  {

  Buffalo var = dialog.store (['PgNm']);

  Dialog.Enable({"PPfx":bIsOn,"PPsf":bIsOn});)

  This. SetDocNumber (dialog, this);

  },

  "DNum": function (dialog)

  {

  This. SetDocNumber (dialog, this);

  },

  "So": function (dialog)

  {

  Dialog.Enable({"DNum":Dialog.) Store() ["so"]});

  This. SetDocNumber (dialog, this);

  },

  'LPfx': function (dialog)

  {

  This. SetDocNumber (dialog, this);

  },

  'LTyp': function (dialog)

  {

  var oRslt = dialog.store ();

  path of var = [];

  cSel var = ((this. GetListSel (oRslt ["LTyp"], path))? path.reverse ():"").toString();

  var oLabInfo = this.oDocNumParams [cSel];

  If (! oRslt ["DNum"] |) (oRslt ["DNum'] == ' ') | isNaN (oRslt ["DNum"]))

  Dialog.Load({"DNum":"1"});)

  If (oLabInfo)

  {

  Dialog.Load ({"LPfx": oLabInfo.Prefix, "So":oLabInfo.UseDocNum, "PgNm":oLabInfo.UsePgNum, "PPfx":oLabInfo.PagePrefix});})

  Dialog.Enable ({"DNum": oLabInfo.UseDocNum, "PPfx":oLabInfo.UsePgNum, "PPsf":oLabInfo.UsePgNum});})

  This. SetDocNumber (dialog, this);

  }

  },

  "PosB": function (dialog)

  {

  Dialog.Enable({"MrgV":true});)

  },

  "POS": function (dialog)

  {

  Dialog.Enable({"MrgV":false});)

  },

  'PosT': function (dialog)

  {

  Dialog.Enable({"MrgV":true});)

  },

  "PosR": function (dialog)

  {

  Dialog.Enable({"MrgH":true});)

  },

  "PosC": function (dialog)

  {

  Dialog.Enable({"MrgH":false});)

  },

  'PosL': function (dialog)

  {

  Dialog.Enable({"MrgH":true});)

  },

  Description:

  {

  name: 'batch labeling automatic Application. "

  elements:

  [

  {

  type: "display."

  elements:

  [

  {

  type: "display."

  alignment: "align_fill",.

  elements:

  [

  {

  type: "display."

  height: 14.

  align_children: "align_top."

  elements:

  [

  {

  type: 'static_text. "

  item_id: "MNLF."

  name: ' Please enter information for application document numbering labels,:

  height: 14.

  Police: "palette."

  "BOLD": true,

  },

  {

  type: 'static_text. "

  item_id: "sta1."

  name: "Version 1.4-7/1/16 SCS/CA."

  height: 14.

  alignment: 'align_right ',.

  },

  ]

  },

  {

  type: "cluster."

  item_id: "cls2."

  name: "ENTER the INFORMATION LABEL."

  Police: "palette."

  "BOLD": true,

  elements:

  [

  {

  type: "display."

  align_children: "align_row."

  elements:

  [

  {

  type: 'static_text. "

  item_id: "sta3."

  name: "1. Select the Type of Document:»

  },

  {

  type: "popup",

  item_id: "LTyp."

  nom_de_variable: "strLTyp."

  Width: 93

  height: 23,.

  char_width: 8.

  },

  {

  type: "gap."

  item_id: "gap2."

  char_width: 1,.

  char_height: 4,.

  },

  {

  type: 'static_text. "

  item_id: "sta1."

  name: "2 Select background,:

  },

  {

  type: "popup",

  item_id: 'Bkgd ',.

  nom_de_variable: "strBackgroundCol."

  Width: 86

  height: 23,.

  char_width: 8.

  },

  ]

  },

  {

  type: "display."

  align_children: "align_top."

  elements:

  [

  {

  type: 'static_text. "

  item_id: "sta5."

  name: ' 3 Add the front label information of selected document Type,:

  height: 15.

  },

  {

  type: 'edit_text. "

  item_id: "LPfx."

  nom_de_variable: "strLabelPrefix."

  Width: 200,

  height: 75,.

  Multiline: true,

  char_width: 8.

  },

  ]

  },

  {

  type: "display."

  align_children: "align_top."

  elements:

  [

  {

  type: 'static_text. "

  item_id: "sta6."

  name: ' 4. Enter departure Doc # (default 1): ",

  },

  {

  type: 'edit_text. "

  item_id: "DNum."

  nom_de_variable: "strInitDocNum."

  char_width: 3,.

  },

  ]

  },

  {

  type: "display."

  align_children: "align_row."

  elements:

  [

  {

  type: 'check_box. "

  item_id: 'So,'

  name: "Include Doc # (default)."

  nom_de_variable: "bIncludeDocNum."

  alignment: "align_fill",.

  },

  {

  type: 'static_text. "

  item_id: "sta7."

  name: "Enter prefix (or default) Page,:

  },

  {

  type: 'edit_text. "

  item_id: "PPfx."

  nom_de_variable: "strPageNumPrefix."

  char_width: 8.

  },

  {

  type: 'check_box. "

  item_id: "PgNm."

  name: "Include Page # (default)."

  nom_de_variable: "bIncludePageNum."

  alignment: "align_fill",.

  },

  {

  type: 'check_box. "

  item_id: "PPsf."

  name: ' include \"of N\ 'pages ', '.

  nom_de_variable: "bPageNumPostfix."

  alignment: "align_fill",.

  },

  ]

  },

  {

  type: "display."

  align_children: "align_top."

  elements:

  [

  {

  type: 'static_text. "

  item_id: "sta8."

  name: "overview of the label,:

  Police: "palette."

  },

  {

  type: 'edit_text. "

  item_id: 'Exmp ';

  Width: 250,

  height: 75,.

  char_width: 8.

  Multiline: 'true ',.

  ReadOnly: "true."

  },

  ]

  },

  ]

  },

  {

  type: "cluster."

  item_id: "cls3."

  name: "SELECT the PAGE RANGE."

  Police: "palette."

  "BOLD": true,

  elements:

  [

  {

  type: "display."

  align_children: "align_row."

  elements:

  [

  {

  type: 'radio ',.

  item_id: "rAll,"

  group_id: "GRP1"

  name: "All."

  nom_de_variable: "strPgRangeSel."

  height: 20.

  },

  {

  type: 'radio ',.

  item_id: "direct."

  group_id: "GRP1"

  name: "current (applies only to the Open Document)."

  nom_de_variable: "strRange."

  height: 20.

  },

  {

  type: 'radio ',.

  item_id: "rFro."

  group_id: "GRP1"

  name: "to:",

  Width: 12,

  height: 24,.

  },

  {

  type: 'edit_text. "

  item_id: "tFPg."

  nom_de_variable: "strStrtPg."

  height: 24,.

  char_width: 6,.

  },

  {

  type: 'static_text. "

  item_id: "sta1."

  name: "to:",

  height: 24,.

  },

  {

  type: 'edit_text. "

  item_id: "tTPg."

  nom_de_variable: "strEndPg."

  height: 24,.

  char_width: 6,.

  },

  {

  type: 'static_text. "

  item_id: "sOfN."

  name: "of (N)."

  height: 24,.

  },

  ]

  },

  ]

  },

  ]

  },

  {

  type: "cluster."

  item_id: "cls1."

  name: POSITION "SELECT."

  Width: 188

  height: 80,.

  Police: "palette."

  "BOLD": true,

  char_width: 8.

  char_height: 8.

  elements:

  [

  {

  type: "display."

  align_children: "align_top."

  elements:

  [

  {

  type: 'radio ',.

  item_id: "PosL."

  group_id: "PosH,"

  name: "Left",

  nom_de_variable: "strHorzPos."

  },

  {

  type: 'radio ',.

  item_id: "PosC".

  group_id: "PosH,"

  name: 'Center ',.

  },

  {

  type: 'radio ',.

  item_id: "PosR."

  group_id: "PosH,"

  name: "right."

  },

  {

  type: 'static_text. "

  item_id: "sta2."

  name: "margin (inches)": ","

  },

  {

  type: 'edit_text. "

  item_id: "MrgH."

  nom_de_variable: "nMarginX."

  char_width: 8.

  },

  ]

  },

  {

  type: "display."

  align_children: "align_top."

  elements:

  [

  {

  type: 'radio ',.

  item_id: 'PosT',

  group_id: 'VPOS ',.

  name: 'Top',

  nom_de_variable: "strVertPos."

  },

  {

  type: 'radio ',.

  item_id: "POS."

  group_id: 'VPOS ',.

  name: "Middle",

  },

  {

  type: 'radio ',.

  item_id: "PosB"

  group_id: 'VPOS ',.

  name: "bottom."

  },

  {

  type: 'static_text. "

  item_id: "sta1."

  name: "room (inches):»

  },

  {

  type: 'edit_text. "

  item_id: "MrgV."

  nom_de_variable: "nMarginY."

  char_width: 8.

  },

  ]

  },

  ]

  },

  {

  type: "cluster."

  item_id: "cls1."

  name: 'SAVE OPTIONS ',.

  Police: "palette."

  "BOLD": true,

  alignment: "align_fill",.

  elements:

  [

  {

  type: "display."

  align_children: "align_top."

  elements:

  [

  {

  type: 'check_box. "

  item_id: "SPst"

  name: "save file."

  nom_de_variable: "bSaveWPostFx."

  },

  {

  type: 'static_text. "

  item_id: "sta9."

  name: "Enter Doc Type of recorded file name (optional):"

  },

  {

  type: 'edit_text. "

  item_id: "SŠPR."

  nom_de_variable: "strSavePrefix."

  Width: 73

  height: 23,.

  char_width: 8.

  alignment: "align_fill",.

  },

  {

  type: 'static_text. "

  item_id: "sta3."

  name: "Include Doc # in the name of the saved file (optional):"

  },

  {

  type: 'radio ',.

  item_id: "None."

  group_id: "SvDN."

  name: 'no ', he said.

  nom_de_variable: "strDocNumInName."

  },

  {

  type: 'radio ',.

  item_id: "DnPr."

  group_id: "SvDN."

  name: '' Yes. ''

  },

  ]

  },

  {

  type: "display."

  align_children: "align_top."

  alignment: "align_top."

  elements:

  [

  {

  type: "ok."

  ok_name: 'Apply Label and save',

  },

  {

  type: 'button ',.

  item_id: 'Skip,'

  name: 'Skip this Doc. "

  },

  {

  type: 'button ',.

  item_id: "Abrt"

  name: "Cancel."

  },

  {

  type: 'static_text. "

  item_id: "sta1."

  name: "" file name: ","

  alignment: 'align_right ',.

  },

  {

  type: 'edit_text. "

  item_id: "SvFl."

  Width: 295

  height: 23,.

  char_width: 8.

  ReadOnly: "true."

  },

  ]

  },

  ]

  },

  ]

  },

  ]

  }

  };

  overall. DoPlaceDocNumbers = app.trustedFunction (function (oOrigDoc)

  {

  app.beginPriv ();

  Setup from the parameters

  var oTrgDoc = oOrigDoc;

  var nPgStart, nPgEnd, nPgTrgStart;

  var cBkCol = ["t."];

  switch (global. DocNumAction.strBackgroundCol.toString ())

  {

  case 'Transparent ':

  cBkCol = ['t.'];

  break;

  case "yellow":

  cBkCol = ['RGB', 1, 1, 0];

  break;

  case "green":

  cBkCol = ['RGB', 0.1, 0];

  break;

  case "Blue":

  cBkCol = ["RGB", 0,0, 1];

  break;

  case "gray":

  cBkCol = ['RGB',.7,.7,.7];

  break;

  case "white":

  cBkCol = ['RGB', 1, 1, 1];

  break;

  }

  switch (global. DocNumAction.strPgRangeSel)

  {

  case 'rAll:

  nPgTrgStart is nPgStart = 0;.

  nPgEnd = oOrigDoc.numPages-1;

  break;

  case 'rCur ':

  nPgTrgStart = nPgEnd = nPgStart = oOrigDoc.hidden? 0:oOrigDoc.pageNum;

  break;

  case 'rFro ':

  nPgTrgStart = nPgStart = number (global. DocNumAction.strStrtPg)-1;

  If (nPgTrgStart > (oOrigDoc.numPages-1))

  nPgTrgStart = oOrigDoc.numPages-1;

  nPgEnd = number (global. DocNumAction.strEndPg)-1;

  If (nPgEnd > (oOrigDoc.numPages-1))

  nPgEnd = oOrigDoc.numPages-1;

  break;

  }

  Start marking loop

  var nNumPages is nPgEnd - nPgStart + 1;.

  var nCurPgNum = nPgStart;

  for (nPg var = 0; nPg < nNumPages; nPg ++ nCurPgNum ++, nPgTrgStart ++)

  {

  Create a text label

  var global = strExample. DocNumAction.strLabelPrefix;

  If (Global. DocNumAction.bIncludeDocNum)

  strExample += overall. DocNumAction.nCurrentDocNum;

  If (Global. DocNumAction.bIncludePageNum)

  {

  strExample += eval ("'" + global.) DocNumAction.strPageNumPrefix + "" "") + (nCurPgNum + 1) m:System.NET.SocketAddress.ToString ();

  If (Global. DocNumAction.bPageNumPostfix)

  strExample += 'of' + oOrigDoc.numPages;

  }

  Find the location on the Page

  Download the base params

  var rcPage = oOrigDoc.getPageBox ("Crop", nCurPgNum);

  var mxToDefaultCoords = (new Matrix2D()) .fromRotated (oOrigDoc, nCurPgNum);

  var nPgRot = oOrigDoc.getPageRotation (nCurPgNum);

  var rcRot = [];

  var nAlign;

  var nMargX = number (global. DocNumAction.nMarginX) * 72;

  switch (global. DocNumAction.strHorzPos)

  {

  case "PosL:

  strAlign = 'left '; Left-aligned text

  rcRot [0] = nMargX;

  rcRot [2] = nMargX + nLabWidth;

  break;

  case "PosC":

  strAlign = 'center '; Left-aligned text

  rcRot [0] = rcPage [2] / 2 - nLabWidth/2;

  rcRot [2] = rcPage [2] / 2 + nLabWidth/2;

  break;

  case "PosR":

  strAlign = 'right '; Left-aligned text

  rcRot [0] = rcPage [2] - nMargX - nLabWidth;

  rcRot [2] = rcPage [2] - nMargX;

  break;

  }

  Find the number of lines

  var nMargY = number (global. DocNumAction.nMarginY) * 72;

  var nLigne = 1;

  var oMtch = strExample.match(/(\n)/g);

  If (oMtch)

  nLigne += oMtch.length;

  var bxHght = nLigne * (nLabLineHeight + 1);

  switch (global. DocNumAction.strVertPos)

  {

  case 'PosT ':

  rcRot [1] = rcPage [1] - nMargY - bxHght;

  rcRot [3] = rcPage [1] - nMargY;

  break;

  case "POS":

  rcRot [1] = (rcPage [1] - bxHght) / 2;

  rcRot [3] = (rcPage [1] + bxHght) / 2;

  break;

  case "PosB":

  rcRot [1] = nMargY;

  rcRot [3] = nMargY + bxHght;

  break;

  }

  var rectAnnot = mxToDefaultCoords.transform (rcRot);

  Find an existing annot and remove if there is

  annot var = oTrgDoc.getAnnot (nPgTrgStart, "DocNumberLabel");

  If (Annot)

  Annot.Destroy ();

  Create annotation

  strExample = strExample.replace(/\r\n/g,"\r");

  oTrgDoc.addAnnot ({type: "FreeText", page: nPgTrgStart, rect:rectAnnot,})

  Rotate: nPgRot, width: 0, fillColor:cBkCol,

  readOnly: overall. DocNumAction.strBoxStateSel == "Lckd."

  richContents: [{textColor: ["RGB", 0,0, 0], textSize:nLabLineHeight,}]

  [{alignment: strAlign, text: strExample}].

  name: "DocNumberLabel."

  });

  }

  If selected then flatten

  If (Global. DocNumAction.strBoxStateSel is "Fltn")

  oTrgDoc.flattenPages ();

  Save file

  If (Global. DocNumAction.bSaveWPostFx)

  {

  var cSavePath = oOrigDoc.path.replace(/\/[^\/]+$/,"/"); "

  var cDocPrefix;

  cDocPrefix = global. DocNumAction.strLabelPrefix;

  Document prefix number

  cSavePath += overall. DocNumAction.strSavePrefix;

  If (Global. DocNumAction.strDocNumInName is "DnPr")

  {

  If (Global. DocNumAction.bIncludeDocNum)

  cSavePath += overall. DocNumAction.nCurrentDocNum += "_";

  }

  "cSavePath += oOrigDoc.documentFileName.replace(/\.pdf/," ");"

  Number of document as prostfix

  If (Global. DocNumAction.strDocNumInName is 'DnFx')

  {

  If (Global. DocNumAction.bIncludeDocNum)

  cSavePath += overall. DocNumAction.nCurrentDocNum;

  }

  cSavePath += ".pdf";

  oTrgDoc.saveAs (cSavePath);

  }

  app.endPriv ();

  });

  }

  var DoNumActionDlg = app.trustedFunction (function)

  {

  app.beginPriv ();

  return app.execDialog (global. DocNumAction);

  app.endPriv ();

  });

  Setup

  var oDoc = event.target;

  If (odoc.xfa)

  {

  If (3 == app.alert (oDoc.documentFileName + ": is a form of LiveCycle, which may not be labeled\n\n you want to continue processing the files?")) (Pressing No. will stop the processing of the file) ", 1, 2))

  Event.RC = false;

  }

  on the other

  {

  overall. DocNumAction.bHidden = oDoc.hidden;

  if(!odoc.) Hidden)

  overall. DocNumAction.nCurPage = oDoc.pageNum;

  on the other

  overall. DocNumAction.nCurPage = 0;

  overall. DocNumAction.nNumPages = oDoc.numPages;

  overall. DocNumAction.strFileName = oDoc.documentFileName;

  cRtn var = DoNumActionDlg();

  If ("ok" is cRtn)

  {

  Configure the Initial of Doc number

  If (Global. DocNumAction.bIncludePageNum)

  overall. DocNumAction.nCurrentDocNum = number (global. DocNumAction.strInitDocNum);

  Console.println ("Do" + oDoc.documentFileName);

  overall. DoPlaceDocNumbers (oDoc);

  Increment if applicable Doc number

  If (Global. DocNumAction.bIncludeDocNum)

  {

  overall. DocNumAction.nCurrentDocNum ++;

  overall. DocNumAction.strInitDocNum = global. DocNumAction.nCurrentDocNum.toString ();

  }

  }

  ElseIf ("Abrt" == cRtn)

  Event.RC = false;

  }

  I suppose it comes from the exchange of shares on AcrobatUsers.com. Are you the error with the unmodified script as well? If this isn't the case, what you changed in the code (and for what purpose)?

  Your subject line refers to an error of NaN - how - what is factor in this problem?

  A 'NaN' error is thrown when occurs a condition 'Not a number', which may for example be that you are trying to perform an operation which cannot be done with a number on a chain, or if you try to divide by zero.

• Calculates the treatment field values 1 step behind

  I have a very long form created in Acrobat Pro (latest version).

  To simplify the problem, this is what is happening.

  I have text boxes on a form and the user will enter quantity and price in each row for the materials and form will calculate to multiply these values and give you the total for each product and at the end, add all the totals giving you your total final.

  T1 * P1 = T1

  T1 + T2... T40 plus Total cost of material

  Which works very well.

  I then the user enter the estimate and below this breakthrough for what is the cost of labour, which is the cost of equipment, which is taxes, and then the rest is profit. The cost of the equipment is simply copied to the Total cost of the above materials.

  However, the calculation is made to simply take so I need percentages thus:

  The total cost of materials / estimate = percentage

  This grave 1 step walk behind. As in, it has not calculated the first go-around. You must enter a value elsewhere on the form or if I generate a button "Calculate" it will then deal with it. It's like if we take the old value before the field has been dynamically updated.

  Link to the PDF is below, if you fill in the Qs and Ps see the Ts fill fine.

  Below on the left turns is the estimate that you need to enter. In doing so, you will see the % for material cost and profit are bad, if you change a value anywhere on the form, you will see that they are then the value that was already there.

  I hope that makes sense for a person, the calculated values are 1 step behind and I need to understand why and get that fixed.

  Link to the PDF document

  Also, if I do these fields % under the shape number and 2 decimal places, I get an avalanche of mistakes whenever I enter a new value somewhere on the form I think because he's trying to divide by a number of vacuum which get a NaN error and gives me a pop up that it does not match the required format. How can I disable this error? I need to limit it to 2 decimal places, or 3 actually, but don't have a ton of errors popup whenever the user starts to fill the form.

  It's a problem of calculation of classic field command. You need to go to Tools - Forms - change - other tasks - defined field calculation order and whole list in the order in which calculations occur. So if a field is dependent on the value of the field B, then it must be lower than him in the list.

• Java Script in a header on a html page in an apex application

  I have the following function in the html of a page header in an apex application

  function calc(pThis){
       if(checkItem (pThis)){
            var lName = pThis.id.split('_');
            var lName2 = [];
            var gCalcRow = 0;
            var gCalcCol = 0;
            var gCalcTotal = 0;
            var lTable = $x_UpTill(pThis,"TABLE");
            var gInputs = html_Return_Form_Items(lTable,'TEXT');
  
            var gRow = pThis.parentNode.parentNode;
            gRow = gRow.cells[gRow.cells.length-1];
  
            var gCol = pThis.parentNode.cellIndex;
            gCol = lTable.rows[lTable.rows.length-1].cells[gCol];
  
            var gTotal = lTable.rows[lTable.rows.length-1].cells[gRow.cellIndex];
  
            for (var i=0; i<gInputs.length ;i++){
                 lName2 = gInputs.id.split('_');
  
                 if(lName2[1] == lName[1]){
  
  if(gInputs[i].value-0 != ""){
  
                      /* calc row */
  
                      gCalcRow = gCalcRow + (gInputs[i].value-0);
  
                 }}
  
                 if(lName2[0] == lName[0]){
  
  if(gInputs[i].value-0 != ""){
  
                      /* calc column */
  
                      gCalcCol = gCalcCol + (gInputs[i].value-0);
  
                 }}
  
                 /* calc total */
  
  if(gInputs[i].value-0 != ""){
  
                 gCalcTotal = gCalcTotal + (gInputs[i].value-0);
  
            }}
  
                 return;
  
  }
  
  
  I only wish to calculate totals if the values in the gInputs fields are not null I have added the if(gInputs.value-0 != "") statement however when the code executes is raises a NaN error, I have no real experience using java script so my syntax could be way off.
  
  
  
  Any help would be great
  
  
  
  Tina
  
  
  
  Edited by: tinaK12959565 on 09-Sep-2010 04:14 
  			 
  Hello
  NaN is the return of JS for not a numbercode.
  The user this feature to test the digital
  function isNumber(n) {
    return !isNaN(parseFloat(n)) && isFinite(n);
    // Return TRUE if n is number , else returns false
  }
  
  Add the function above in your header HTML script
  Change your code to use this feature
   //if(gInputs.value-0 != ""){if (isNumber(gInputs[i].value) ){/* calc column */
  
  
  Regards,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  		   

• Updated report with the javascript calculation

  Hi all
  
  I have an updated report updated when the user fills one column. I then need a simple multiplication based on the user filled in the column and another column to fill in the last column.
  
  I managed to do it using the JavaScript in the page header
  

  <script language="JavaScript" type="text/javascript">
  
  <!--
  
  function calcit(pThis)
  
  {
  
  var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
  
  
  
  html_GetElement('f03_'+vRow).value = html_GetElement('f02_'+vRow).value * html_GetElement('f01_'+vRow).value;
  
  
  
  }
  
  //-->
  
  </script>

  F01 column is a value in a table based on SQL to create the report (AQLSCORE)
  F02 column is what the user fills out (AQLERRORS)
  F03 column is where the calculation is populated (AQLTOTAL)
  
  With the attribute of the element AQLERRORS = onchange = "additives (this); »
  
  The problem I have with the above is that it only works when f03 is a text field (that is, the user can change the value) I wish column not editable (the user should not be able to edit this field). If I do the column text display (saves the State) the calculation returns a NaN error.
  
  When I change the calculation of a * a + the return value 1undefined shows that the value of f01 is indefinite
  
  Demo app
  
  http://Apex.Oracle.com/pls/Apex/f?p=15328
  
  user name: demo
  password: demo
  
  There are 2 pages that where the calculation works, but with AQLSCORE as a text field, and another where he returned NaN but with AQLSCORE as display text (saved state)
  
  Any ideas how I can perform the calculation and protect the AQLSCORE of the user column
  
  Kind regards
  
  Alex
  
  Published by: user10942729 on July 30, 2010 08:12

  Take alook at the modifed JS in the header HTML

  The f01_000n elements are display (saves the State) so that they appear as follows in the HTML DOM.

  2
  

  To access the content, you will need to use innerHTML as the 'value' attribute is not in use here.

  BTW, for

  html_GetElement('f03_'+vRow).value 
  

  You can use the shortcut

  $x('f03_'+vRow).value 
  

  Kind regards.

• VBAI 2010 Fatal Error (NaN to the number)

  I get a fatal error (banner image see attached) that I've never seen before in VBAI 2010: NaN A value at a stage of Calculator gets interpreted as a large negative number (-2.14E + 9) in a region of interest later stage creation, which in turn causes the subsequent automatic contour trigger the fatal event.

  The cause, in this case, is a missing measure (an occurrence common for this and other similar calculator steps in this routine), the coordinate x of an endpoint of edge in the previous step, where I subtracted a 2, that is, I'm trying to set a limit KING 2 pixels away from the previous edge found.  In general, when I have a missing measure in this situation, the KING subsquent ends at the origin of the image (0,0), but VBAI not fall down.

  I fully undestand why VBAI crashes with an edge KING listed so far has "Left Field", but I am at a loss to explain why a NaN output get caclulator is interpreted as - 2.14E + 9.  Glancing through the routine in Setup mode and changes the step create region of interest, a message indicates that a "missing measurement is replaced by a constant" or something to that effect and the constant turns out to be - 2.14E + 9, so I guess that this process happens in the background when it is in mode of inspection.  What I don't understand is why my routine never threw this error before when the measure was absent, but since this morning, it throws the error every time!

  I have a temporary work-around (verification of the NaN in the step of the calculator and strength to zero if necessary), but I have a lot of similar sequences to fix and want to make sure that I understand why this fatal error is suddenly appeared.

  Any ideas appreciated,

  Eric

  It's fixed in VBAI 2011 and newer. He will plant is no longer with the VDM dll updated and VBAI, if a previous measure used by the step of ROI is NaN, KING step will treat it as a missing measure and return on investment stage will fail. NaN is cast to many is because NaN is valid for values to double, and the KING coordinates are integers, so when convert us internally the NaN in full, it is interpreted as a large number. Not sure why it would just start happening today though.

  Hope this helps,

  Brad

• FFT returns NaN, no error

  I am trying to trace the FFT of a certain number of waveforms, but I find that for some outputs simply return an array of "NaN" instead of the scale, with no indicated error. Looking at the data I see no significant difference that could cause this. anyone can shed light on the problem?

  I watched the formula apparently used by the FFT vi in aid detailed and created my own version, and he experiences the same problem with the same sets of data. Fathom what happens, it seems to descend to labview randomly taking one of my input data values and its reading like "NaN" - a bad size and TFF any fate of NaN. Why is reading that entry as NaN but is a mystery, and yet he does it regularly because the same plots always failed.

  I have attached the relevant vi to look, any help would be appreciated.

  You were asked to see if the data included NaN and you do not. The last element of the third data series is NaN. I haven't checked the other tables because it is something you need to do.

• error of Nan

  Hello, I'm trying to create a simple math problem in flash cs6.  That's what I have, but I get an error message 'not a number' nan in the total box.

  I have 3 boxes of text with variables defined with the names of them and a box of dynamics with a like response variable name.  I also have a button which is label calculate which calculates the response after the 3 boxes have numbers in them which pushes the answer in the answer box.  This is what I have in the button

  on (release) {}

  answer = Number (firstnumber) + Number (secondnumber) / Number (thirdnumber) * 1.5;

  }

  I hope that makes sense, any help would be great.

  Thank you

  Some recommendations...

  (1) do not use the variable property of the textfield object - it is not reliable.  Just refer to its text property by using the textfield instance name to acquire and assign the values.

  (2) do not place the code 'on' objects - put it in the timeline panel instead where it is easier to find the code and the target objects.

  btnName.onRelease = function() {}

  Answer.Text = String (Number (secondnumber.text), (firstnumber.text) Number + Number (thirdnumber.text));

  }

  (3) make sure the textfields are single-line, multiline not.

• More strange error NaN never

  OK, Ive got this piece of script that gives me an error of NaN.

  Now the strange thing is, when I got the same code with objects of different libraries, it worked fine:

  Error of NaN give the code:

  for (var teller1 = 0; teller1 < 5; teller1 ++) {}
  var dna_mc:dna = new dna();
  dna_mc.x = Math.Random () * 600 + 150;
  dna_mc.y = Math.Random () * 400 + 150;
  dna_mc.snelheidx = Number (Math.random () * 5 + 4);
  dna_mc.snelheidy = Number (Math.random () * 5 + 4);
  dna_mc.geklikt = Number (0);
  dna_mc.score = Number (20);
  dna_mc.addEventListener (Event.ENTER_FRAME, moving);
  dna_mc.addEventListener (MouseEvent.MOUSE_DOWN, zakklik);
  addChild (dna_mc);
  }
  for (var teller2 = 0; teller2 < 20; teller2 ++) {}
  var chelex_mc:chelex = new chelex();
  chelex_mc.x = Math.Random () * 600 + 150;
  chelex_mc.y = Math.Random () * 400 + 150;
  chelex_mc.snelheidx = Number (Math.random () * 15 + 4);
  chelex_mc.snelheidy = Number (Math.random () * 15 + 4);
  chelex_mc.geklikt = Number (0);
  chelex_mc.score = Number(-10);
  chelex_mc.addEventListener (Event.ENTER_FRAME, moving);
  chelex_mc.addEventListener (MouseEvent.MOUSE_DOWN, zakklik);
  addChild (chelex_mc);
  }
  
  var score: Number = 0;
  
  function zakklik (evt:MouseEvent) {}
  evt. Target.snelheidy = 2;
  evt. Target.snelheidx = 0;
  evt. Target.geklikt = 1;
  score += evt.target.score;
  evt. Target.Stop ();
  evt. Target.Alpha =. 5;
  Plop.Play ();
  }
  
  function moving (evt:Event) {}
  evt. Target.rotation += evt.target.snelheidx;
  If {(evt.target.geklikt == 0)
  evt. Target.x += evt.target.snelheidx;
  evt. Target.y += evt.target.snelheidy;
  If (evt.target.y > 649 | < 120 evt.target.y) {}
  evt. Target.snelheidy * =-1;
  }
  If (evt.target.x < 100 | evt.target.x > 800) {}
  evt. Target.snelheidx * =-1;
  }
  }
  If {(evt.target.geklikt == 1)
  If {(evt.target.y < 649)
  evt. Target.y += evt.target.snelheidy;
  }
  }
  If (score < 0) {score = 0};
  scoretext. Text = "DNA:" + score;
  }

  Code works correctly:

  for (var teller1 = 0; teller1 < 10; teller1 ++) {}
  var bol1_mc:bol1 = new bol1();
  bol1_mc.x = Math.Random () * 550;
  bol1_mc.y = Math.Random () * 400;
  bol1_mc.snelheidx = Number (Math.random () * 15 + 5);
  bol1_mc.snelheidy = Number (Math.random () * 5 + 5);
  bol1_mc.geklikt = Number (0);
  bol1_mc.score = Number(-1);
  bol1_mc.addEventListener (Event.ENTER_FRAME, moving);
  bol1_mc.addEventListener (MouseEvent.MOUSE_DOWN, zakklik);
  addChild (bol1_mc);
  }
  for (var teller2 = 0; teller2 < 10; teller2 ++) {}
  var bol2_mc:bol2 = new bol2();
  bol2_mc.x = Math.Random () * 550;
  bol2_mc.y = Math.Random () * 400;
  bol2_mc.snelheidx = Number (Math.random () * 5 + 5);
  bol2_mc.snelheidy = Number (Math.random () * 15 + 5);
  bol2_mc.geklikt = Number (0);
  bol2_mc.score = Number (1);
  bol2_mc.addEventListener (Event.ENTER_FRAME, moving);
  bol2_mc.addEventListener (MouseEvent.MOUSE_DOWN, zakklik);
  addChild (bol2_mc);
  }
  
  var geklikt = 0;
  var score: Number = 0;
  
  function zakklik (evt:MouseEvent) {}
  evt. Target.snelheidy = 2;

  
  evt. Target.snelheidx = 0;
  evt. Target.geklikt = 1;
  score += evt.target.score;
  }
  
  function moving (evt:Event) {}
  If {(evt.target.geklikt == 0)
  evt. Target.x += evt.target.snelheidx;
  If {(evt.target.x > 549)
  evt. Target.snelheidx * =-1;
  }
  If (evt.target.x < 1) {}
  evt. Target.snelheidx * =-1;
  }
  evt. Target.y += evt.target.snelheidy;
  If {(evt.target.y > 399)
  evt. Target.snelheidy * =-1;
  }
  If (evt.target.y < 1) {}
  evt. Target.snelheidy * =-1;
  }
  }
  If {(evt.target.geklikt == 1)
  If {(evt.target.y < 399)
  evt. Target.y += evt.target.snelheidy;
  }
  }
  scoretext. Text = "Note:" + score;
  / * If (evt.target.hitTestObject (blok1)) {}
  evt. Target.snelheidx * =-1;
  }**/
  }

  You see the difference? I can't :/

  Use currentTarget instead of the target.

• Loader: Nan.jpg + SecurityError: Error #2000: no security context is active.

  Hello.

  By using the code below, I get the 2035 error, informing me that my jpg is not a number.

  Same code with the ioErrorHandler bits comments, outputs SecurityError: Error #2000: no security context is active.

  Same code without the NombrAl and with the right way to the jpgs in the string, works fine (charges 16.jpg), as such - var req:URLRequest = new URLRequest("..) (' / images/16.jpg ");

  Any ideas?

  import flash.display. *;

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.events. *;

  import flash.utils.setTimeout;

  var req:URLRequest = new URLRequest("..) /images/"+randomNumber+".jpg");

  var loader: Loader = new Loader();

  var randomNumber:Number = Math.ceil (Math.random () * 16);

  function imageLoaded(event:Event):void

  {

  addChild (loader);

  }

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  Loader.Load (req);

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  function ioErrorHandler(e:IOErrorEvent):void {}

  trace (e.Text);

  }

  use:

  import flash.display. *;

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.events. *;

  import flash.utils.setTimeout;

  var randomNumber:Number = Math.ceil (Math.random () * 16);

  var req:URLRequest = new URLRequest("..) /images/"+randomNumber+".jpg");

  var loader: Loader = new Loader();

  function imageLoaded(event:Event):void

  {

  addChild (loader);

  }

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  Loader.Load (req);

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  function ioErrorHandler(e:IOErrorEvent):void {}

  trace (e.Text);

  }

• Satellite Pro L500 - F3 - F200 - 0002 ERROR at STARTUP

  Hello

  Last night I went to reformat my laptop, to halfway through I thought no I won't do this more then I clicked Cancel. Now whenever I try to turn on my laptop, it just gives me the ERROR saying F3-F200-0002 and won't start. I tried pressing F8 at startup, but there is no option for recovery or repair in the menu mode just safe mode debugging etc.

  I was looking at forums and discovered I should press 0 constantly while the laptop boot and it will bring up recovery Wizard. Anyway, when I do this it says HARD drive recovery mode, then said Windows is loading files, then it goes to a page saying ERROR F3-FF00-0006.

  I was told to download this file (http://209.167.114.38/support/techsupport/tsbs/all/-TSB001522.htm) but I don't know how to run it on my laptop which is broken (I'm on my computer of nans for the moment). I tried to put it on a USB key and mortising the USB in, but it won't work.

  I need urgent assistance that I use my laptop for my work (I work from home, using laptop computer). We have a lot to say if you could help me fix it at home, I have no money at the moment to be able to get a recovery disk or send the computer for professionals to fix store.

  P.S. I'm on Windows7 and my laptop is a Toshiba Satellite Pro L500.

  As I know the installation of recovery should not be interrupted. If you do you not have access to the wizard of recovery more. Now, all you can do is install image recovery using recovery DVDs.

  If you have created a? Otherwise you can order under https://backupmedia.toshiba.eu/landing.aspx

  Otherwise that you can try to install the version of the OS if you have the original installation disc for Microsoft.
  You know, now the situation is quite complicated.

  By the way: in another ad with the description of the similar problem some people wrote that this error message can be caused by damaged HARD drive. I can't confirm this, but anything is possible.

• Database schema error - 2147467259

  Hello community,

  Using 32-bit Teststand 2014.

  When executing my movie file, a digital step in my sequence failed.

  After the failure of step, accordingly, my sequence stops the test and run cleaning.

  I'm then prompted with the error message, see image attached, when Teststand save my data in the database.

  I opened my database SQL and noticed that all the previous steps "Spent" have been registered in the database fine but the step failed has never been registered.

  My scheme is configured to record the steps Passed and Failed.

  I solved my problem.

  I had the STEP_RESULT measured value starting from the game as a float of patterns of treatment results, but the step which has not led to a NAN value.

  I changed the value to a string in order to manage the numbers and strings.

• Why does the period display NaN? What does it mean "NaN"?

  I have a vi that is supposed to measure values of period 3 and 2 tension using DAQmx.  The vi is attached.

  When I run the vi, I get no error, but one of the counters display NaN instead of a period (in seconds) value.  Why would this counter not appearing?  See the .jpg image of the screenshot, which shows the lights on the front panel, after execution and stop the vi.  Note that the period 2 shows "NaN" but, period 1 and 3 show a real value.  "NaN" only displays in "period 2" executing too. ' " "Period 2" never displays a numeric value.  Moreover, as "NaN" actually mean?

  Appreciate your thoughts.

  Thank you

  Dave

  (using 3 counters in the cDAQ-9174 and the module OR 9401 plugged into the chassis cDAQ; periods are measured from the encoders)

  NaN means not 'a number '.

  In your code, Mean.vi will return NaN (with the error-20003) if the input array is empty.

  What happens if you connect the signal of the 1 meter or 3 to counter 2? If NaN disappears, then there is a problem with the signal currently connected to the meter 2.

  1. Your current code, using usrs to (unitialized shift registers), will produce NaN when running for the first time.
  
  
  2. The size of the usrs to will increment at each iteration.
  
  
  3. If your VI is used as a Subvi, the means will be bad for the first 15 iterations since they will be calculated with the values of the usrs to--> previous lengths.

  You must use PtByPt.vi means that will calculate the average of the X last values without above mentioned problems.