VBAI 2010 Fatal Error (NaN to the number)
I get a fatal error (banner image see attached) that I've never seen before in VBAI 2010: NaN A value at a stage of Calculator gets interpreted as a large negative number (-2.14E + 9) in a region of interest later stage creation, which in turn causes the subsequent automatic contour trigger the fatal event.
The cause, in this case, is a missing measure (an occurrence common for this and other similar calculator steps in this routine), the coordinate x of an endpoint of edge in the previous step, where I subtracted a 2, that is, I'm trying to set a limit KING 2 pixels away from the previous edge found. In general, when I have a missing measure in this situation, the KING subsquent ends at the origin of the image (0,0), but VBAI not fall down.
I fully undestand why VBAI crashes with an edge KING listed so far has "Left Field", but I am at a loss to explain why a NaN output get caclulator is interpreted as - 2.14E + 9. Glancing through the routine in Setup mode and changes the step create region of interest, a message indicates that a "missing measurement is replaced by a constant" or something to that effect and the constant turns out to be - 2.14E + 9, so I guess that this process happens in the background when it is in mode of inspection. What I don't understand is why my routine never threw this error before when the measure was absent, but since this morning, it throws the error every time!
I have a temporary work-around (verification of the NaN in the step of the calculator and strength to zero if necessary), but I have a lot of similar sequences to fix and want to make sure that I understand why this fatal error is suddenly appeared.
Any ideas appreciated,
Eric
It's fixed in VBAI 2011 and newer. He will plant is no longer with the VDM dll updated and VBAI, if a previous measure used by the step of ROI is NaN, KING step will treat it as a missing measure and return on investment stage will fail. NaN is cast to many is because NaN is valid for values to double, and the KING coordinates are integers, so when convert us internally the NaN in full, it is interpreted as a large number. Not sure why it would just start happening today though.
Hope this helps,
Brad
Tags: NI Hardware
Similar Questions
-
While improving a W7 x86_64 installation in VirtualBox, virtual machine crashed (not associate Windows) after the update has been downloaded and installed, but before stopping and restarting.
Now I get "fatal error C0000034 applying the update 117809 (_00000...) 282 operation" error every time I start up the virtual machine. Startup Repair and Safe Mode, last good known Configuration did not help (impossible to find problems, suspended and hung respectively). I believe that I have also disabled the system restore.
If I not mistaken, the vm crash caused the installation of MS in missing a step that was supposed to be done so that the closing.
Help me!
The Solution: -
I'm familiar with Oracle databases, but still learning my way around PeopleSoft administration.
After validating the connection information of database with sqlplus from the same platform, psadmin application server start command generated an error message in the console.
tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler
After the attempt failed to start the 8.49 application server, the journal entries were:
PSAPPSRV.55837058 (0) [28/09/15 09:30:31] (4) the Configuration of server settings: {Journal
Ging level = 5, sql trace = 12319, mask of trace sql client = 12319, peoplecode trace = 0,
mask trace client PC = 4095, timeout = 300, County recycling = 2000, max such svc fail
ures = 2, ORACLE, database name database type of == 'DBXX', database server = ", id = user
'PXXXXX', connect id is "CXXXXXX"}
...
PSAPPSRV.55837058 (0) [28/09/15 09:30:32] (1) GenMessageBox (0, 0, M): If the database
gnon: could not sign database DBXX with user PXXXXX.
PSAPPSRV.55837058 (0) [09:30:32 ago] (0) 28/09/15 start the server failed
PSWATCHSRV.6685110 (0) [28/09/15 09:30:33] closing
PSADMIN.58196170 (0) [28/09/15 09:30:39] (0) attempt to end on the dbxx field boot
While the connectivity of sqlplus had tested OK from a client, PeopleSoft Signon pside.exe two levels on the same client Windows resulted in Invalid User ID and password for the access code.
The psaccessprfl table had been updated with the connection of data validated by using a platform application server dms shell script.
The area has been configured using the application server platform psadmin. UserId, UserPswd, ConnectID and ConnectPswd had been entered and verified. Passwords have been encrypted by the suite.
The psoprdefn table showed correct SYMBOLICID uppercase and ACCTLOCK is zero on behalf of PXXXXX.
The psaccessprfl table showed too correct SYMBOLICID.
The psdbowner table showed the DBNAME and OWNERID both uppercase.
The values encrypted in the database matched other environments on the same server platform.
Why app server not sign to the Oracle database?
Using the pscfg.exe, Manager of the Windows client configuration utility, I selected the 5 first checkboxes dialog SQL Trace on the left side of the tab of the Trace, I entered the name and location of the trace people tools to create and store the output of client sessions on the same tab. Then tried another connection to the database, using the pside.exe utility. The text resulting in the newly created text file showed the last executed statement was a select on the table psdbowner. I removed my trace entries using pscfg.exe to stop tracing.
Using the information provided by the last executed statement, I ran a request and discovered that the length (dbname) for the value of the column in the psdbowner table was one character longer than the expected value.
After update the column value by removing the end interval, the utility psadmin on the server worked without error.
-
As I start my custom domain name (HC92), I get the following:
exec PSWATCHSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSWATCHSRV: process id = 1636... Has begun.
exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2656... Has begun.
exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2644... Has begun.
exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2832... Has begun.
exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2692... Has begun.
exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2448... Has begun.
exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 496... Has begun.
exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2964... Has begun.
exec PSRENSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSRENSRV TESTSERV: process id 2356 =... Has begun.
exec PSMONITORSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSMONITORSRV: process id = 1056... Has begun.
exec JSL o '.\LOGS\stdout"e".\LOGS\stderr"- A – n //PSOFT_PC:9000 m 5 - M7-I have 5-j ANY - x 40 s 10 - c 1000000 w JSH: failed.
tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler
tmshutdown - qy
==============ERROR!================
Try to start met domain errors! See TUXEDO log for more details.
==============ERROR!================
----------------------------
Domain LOG FILE
----------------------------
PSADMIN.1088 (0) [2015-01 - 13 T 17: 06:34.774] (0) attempt to Begin priming on domain HC92
PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/2
PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (3) detected time zone is Pacific SA Daylight saving time
PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.134] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_2\
PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:47.056] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)
PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:51.196] (0) server started
PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/1
PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (3) detected time zone is Pacific SA Daylight saving time
PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.665] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_1\
PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.837] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)
PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:52.415] (0) server started
PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/101
PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (3) detected time zone is Pacific SA Daylight saving time
PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.790] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_101\
PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:53.087] (0) server started
PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/100
PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (3) detected time zone is Pacific SA Daylight saving time
PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.493] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_100\
PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.806] (0) server started
PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.743] (0) st PeopleTools version 8.54 (Windows) arting . Tuxedo server is RENGRP 92/101
PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.759] (3) switch to the new log file * C:\PS_CFG_H OME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *
PSADMIN.1088 (0) [2015-01 - 13 T 17: 07:13.698] (0) attempt to end HC92 field boot
* C:\PS_CFG_HOME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *.
-Begin PSRENSRV boot-
PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.273] (3) (NET.113): RenRequest customer service request succeeded
PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.843] (3) (NET.113): RenRequest customer service request succeeded
2356.2708 [2015-01 - 13 T 17: 07:02.075] (WARN) nsmain: off the server immediately asked
----------------------------
SMOKING LOG FILE
----------------------------
170634.PSOFT_PC! PSADMIN.1088: Start the start on domain HC92 attempt
170639.PSOFT_PC! tmadmin.556.2400.-2: TMADMIN_CAT:1330: INFO: command: start - a
170641.PSOFT_PC! tmboot.2392.2544.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit
170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds
170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
170643.PSOFT_PC! BBL.2340.1680.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit, Patch level (none)
170643.PSOFT_PC! BBL.2340.1680.0: LIBTUX_CAT:262: INFO: Standard master boot
170645.PSOFT_PC! tmboot.1488.2464.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit
170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds
170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
170645.PSOFT_PC! PSWATCHSRV.1636.2816.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit
170645.PSOFT_PC! PSWATCHSRV.1636.2816-2: LIBTUX_CAT:262: INFO: Standard main starting
170645.PSOFT_PC! PSAPPSRV.2656.592.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit
170645.PSOFT_PC! PSAPPSRV.2656.592.0: LIBTUX_CAT:262: INFO: Standard main starting
170651.PSOFT_PC! PSAPPSRV.2644.2804.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit
170651.PSOFT_PC! PSAPPSRV.2644.2804.0: LIBTUX_CAT:262: INFO: main starti Standardng
170652.PSOFT_PC! PSSAMSRV.2832.2208.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit
170652.PSOFT_PC! PSSAMSRV.2832.2208.0: LIBTUX_CAT:262: INFO: main starti Standardng
170653.PSOFT_PC! PSSAMSRV.2692.2668.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit
170653.PSOFT_PC! PSSAMSRV.2692.2668.0: LIBTUX_CAT:262: INFO: main starti Standardng
170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit
170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: LIBTUX_CAT:262: INFO: main s Standardtarting
170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit
170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: LIBTUX_CAT:262: INFO: Standard main stsurglace
170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit
170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: LIBTUX_CAT:262: INFO: main s Standardtarting
170656.PSOFT_PC! PSRENSRV.2356.2708.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit
170656.PSOFT_PC! PSRENSRV.2356.2708-2: LIBTUX_CAT:262: INFO: key start Standarding
170658.PSOFT_PC! PSMONITORSRV.1056.2212.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit
170658.PSOFT_PC! PSMONITORSRV.1056.2212-2: LIBTUX_CAT:262: INFO: main s Standardtarting
170658.PSOFT_PC! JSL.640.904.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64 -bit
170658.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:262: INFO: Standard master boot
170658.PSOFT_PC! JSL.640.904.0: INFO: version JOLT Jolt 12.1.1.0 Oracle Listener
170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1568: "INFO: threshold of Compression is tot-1000000 '
170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1242: ' ERROR: Bad Internet type listning address provided: //PSOFT_PC:9000 '
170659.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
170659.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:825: ERROR: process to PSOFT JSL _Pc failed with / t tperrno (TPESYSTEM - internal system error)
170659.PSOFT_PC! tmboot.1488.2464.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error met, launch the user error handler
170710.PSOFT_PC! BBL.2340.1680.0: CMDTUX_CAT:26: INFO: The BBL out of system
170713.PSOFT_PC! PSADMIN.1088End attempt to boot on domain HC92
-------------------------------------------------------------
SETTINGS FOR THE DOMAIN
------------------------------------------------------------
----------------------------------------------
Menu quick access - configure area: HC92
----------------------------------------------
Characteristic parameters
========== ==========
(1) pub/Sub servers: No. 17) DBNAME: [PSHRDMO]
(Server 2) Quick: No. 18) DBTYPE: [ORACLE]
(Query servers 3): No. 19) user name: [PS]
((4) shock: Yes 20) UserPswd: [PS]
((5) Jolt relay: No. 21) Networkid: [TESTSERV]
((6) WSL: No. 22) AddToPATH: [C:\app\psoft\product\11.2.0\dbhome_1\BIN]
(PC 7 debugger): No. 23) ConnectID: [people]
(Event notification 8): Yes 24) ConnectPswd: [people]
[(Serveurs de 9) MCF: No. 25) DomainConnectPswd:]
(10 assembler) Perf: No. 26) Port of WSL: [7000]
((11) Analytics servers: Yes 27) JSL Port: [9000]
(Bridge 12) areas: No. 28) Port of JRAD: [9100]
(13) the server events: No.
Actions
=========
(14) load config as shown
(15) custom configuration
(16) the settings of the environment
(h) aid for this menu
(q) to return to the previous menu
TIP: Enter 17 to change DBNAME, then 14 to load
Enter the selection (1-28, h or q):
--------------------------------------------------------------
ENVIRONMENT SETTINGS
--------------------------------------------------------------
C:\Users\psoft > set
ALLUSERSPROFILE = C:\programdata
APPDATA = C:\Users\psoft\AppData\Roaming
CommonProgramFiles = c: files
CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
CommonProgramW6432 = c: files
COMPUTERNAME = PSOFT_PC
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Users\psoft
JAVA_HOME = C:\Program Files\Java\jdk1.8.0_25
JAVA_OPTS = "" - Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID = 1.0 - Xms32 m - Xmx64m " "
LOCALAPPDATA = C:\Users\psoft\AppData\Local
LOGONSERVER = \\PSOFT_PC
NUMBER_OF_PROCESSORS = 2
OS = Windows_NT
Path = C:\Program Files\Java\jdk1.8.0_25\bin
; C:\app\psoft\product\11.2.0\dbhome_1\bin
; C:\app\psoft\product\11.2.0\dbhome_2\bin
; C:\Windows\System32; C:\Windows
; C:\windows\System32\Wbem
; C:\Windows\system32\WindowsPowerShell\v1.0\
; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\bin
; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin\server
; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin
PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = Intel64 family 6 model 58 Stepping 9 GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 3 a 09
ProgramData = ProgramData
ProgramFiles = c: Program Files
ProgramFiles (x 86) = c: Program Files (x 86)
ProgramW6432 = C:\Program Files
PROMPT = $P$ G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PS_APP_HOME = C:\HC9.2
PS_CFG_HOME = C:\PS_CFG_HOME
PS_HOME = C:\PT8.54
PUBLIC = C:\Users\Public
SESSION = Console
SystemDrive = C:
SystemRoot = C:\Windows
TEMP = C:\Users\psoft\AppData\Local\Temp
TMP = C:\Users\psoft\AppData\Local\Temp
TUXDIR=C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010
USERDOMAIN = PSOFT_PC
USERNAME = psoft
USERPROFILE = C:\Users\psoft
windir = C:\Windows
windows_tracing_flags = 3
windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log
_JAVA_OPTIONS =-Xmx512M
Found this post:
ISNAT_CAT:1242: ERROR: Bad Internet type of listening address
"The problem has been resolved after that I changed my name from ZEMEROV_A to ZEMEROV computer.
Hyphens are not allowed for regular internet names. The only Microsoft DNS server
allows hyphens. Obviously TUXEDO checks the internal Web address syntax.
But I don't know why my IP (10.57.70.246) has failed.
In any case, the issue is resolved. Make sure that TUXEDO documentation recommends-
When using the name of the server host you talk server. This is case and sensitive syntax. »
Where as: I changed my host name of psoft_pc to psoftpc and I changed the same on TNSNAMES and everything worked without problems.
I'll mark this issue is resolved.
Thank you.
-
Device: usb fax modem; fatal error, what is the cause of the problem?
using my usb modem-fax, the result is fatal error, the response of the device that I can't send your fax due to an unexpected error, pls help.
I already installed and installed the device, remove and installed gain but the problem still there, pls help.tnx
Duplicate the content of the Post-
USB FAX MODEM FAIL TO PERFORM
'THE FAX CANNOT BE SENT BECAUSE OF AN UNEXPECTED ERROR' IT IS THE MODEM ANSWER AFTER DIALING THE NUMBER, BUT BEFORE IT WAS OK, PLS TELL WHAT IS THE CAUSE OF THE PROBLEM AND TO SOLVE IT, TNXHello
1. What is the error code when printing / fax fails?
2. What is the brand and model of Fax Modem?
3. use an internal card for your fax and modem functions or an external modem?
4. what was the recent change in hardware or software performed on the computer before the question?
Please follow the links below to solve the problem.
Method 1
Check the compatibility of the device in the Windows 7 Compatibility Center.
Note: Check the categories of SOFTWARE and HARDWARE.Method 2
Follow the links to help resolve the fax modem
Reference, the LEARN Section.
Method 3
Uninstall the program interface for Fax and reinstall it from the manufacturer's website.
Run the uninstall program tool set up to help install questions.Also follow the instrunctions from the link below.Solve fax problemsApplies to Windows 7.I hope this helps. -
Sync problem with Palm Tungsten E2 &; PC - Fatal Error Message on the screen of the PDA
Recently my Palm Tungsten E2 will not synchronize with my PC. The following message appears on the screen of my handheld Palm when it tries to sync: "Fatal Error. ' Mgr.c, Line System: 4038, error launching Application. And a "reset" icon under the message that when activated, cause my PDA to reset through the sequence of the display date/time, etc. My PC system is Windows XP Professional. I recently updated my program to sync Palm from 4.2 to 6.2, which does not fix the problem I have. Your suggestions please?
For this type of error, you need to reset hard E2. I hope that you have all your data in Palm Desktop. After the hard reset, change the desktop hotsync conduits replaces handheld and synchronize.
Click on the following link for the Web page of kb.hpwebos.com for the article about reset procedures
http://KB.hpwebos.com/wps/portal/KB2/common/article/887_en.html
You can export your data for backup purposes, first in case something happens during synchronization.
The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.
Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.
http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
Make sure you only select everything for the beach in the export window.With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.
Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.
With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.
For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.
http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html
There are links on the page the user Troubleshooting Guide, how to, downloads, etc.
-
Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385
Hello
I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).
However, during the installation, I get on a fatal error in the last step, "product Configuration". I uninstalled and reinstalled several times with the same result. As you can imagine, I am really frustrated and seeks help from the community to solve this problem. Here is a screenshot of the error. Your help in solving this problem is greatly appreciated.
Hello
I see that you have a problem with the printer.
I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.
You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.
Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.
Once its finish, you can go back and do the following installation.
Let me know the results.
-
Fatal error when installing the Server Application Weblogic 11 g (10.3.4)
Hello
In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.
So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".
Can someone help me please to solve this error. Thanks in advance
Kind regards
Priya
Hello
The message that took place there is a permission problem. So could you please try the installation with administrator privileges.
In case if the same mistakes persist could you try to install another directory C in a different way.
Kind regards.
Prakash.
-
(Fatal error) Beginning of the root element should
Hello
When you run the application, I had
Error (1.1): line 1, column 1 >: XML-20108: (Fatal Error) start of element root waited.
I think it's due to some libraries missed inside the app. How to solve this problem?
Kind regardshave you checked this file?
C:\dp\jdev11113\Login\ViewController\public_html\mdssys\mdx\Login4.JSPX.RDF
in fact these files created we do not know normally... you can delete this file... and work normally without this error... Make sure you have Login4.jspx file
or fix this one file, check if there is an element of xml as root -
Unable to activate Windows 7 error "license exceeded the number of times that it can be installed"
Original title: Windows 7 Family Pack limit excided.
I have a window 7 Family Pack update 3 pcs. I installed 2 licenses, and when I went to install the third time, he said that the key is not valid. I went through the phone activation home says the license has exceeded the number of times where it can be installed. I had to reinstall on a computer a second time after a virus problem. I think that it why Microsoft thinks that all licenses have been used. How can I fix it?
Thank you
This isn't an uncommon problem, usually a phone call and talk to someone live will fix it.
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspxJ W Stuart: http://www.pagestart.com
-
have already run antivirus
already uninstalled and re-installed the app, I wish to run (even used revounistaller and other programs to ensure that all this)
have already removed all the components of the registry associated with this application, I want to make it work with some programs
In my view, it is over 2 years old, but I just had the same ERROR FATAL happen on my departure upward and found that a power cable to one of my extra hard drives has been disconnected. I was redirecting my temporary files to a G: drive to save space on my SSD boot drive. After that I reconnected it to power, everything was good.
-
HELP: Fatal error - please enter the current password
Can someone help me too? HP 110-1012
When I turn on my laptop it asks me to enter the current password
Faulty password checking.
Fatal Erroe... System stopped.
2MC92131SMHello
Try to enter: 74eo73f3n4
Kind regards
DP - K
-
Skype error: Fatal Error - cannot load the library 'olepro32.dll' (N
Normally, my Skype is perfect! but for some strange reason, it stopped working! I tried to research this topic but failed to fill and reslove this
He will be very grateful if you guys help me to reslove this!
The issue is not with Skype but with damaged your computer system files.
Try to run the tool (sfc/scannow) System File Checker
http://support.Microsoft.com/kb/929833
See also this similar case:
-
It takes 15 minutes for my laptop starts and he has this issue when loading.
It has only been in the last 3 weeks
What can I also solve this problem?
What are the reasons for this eror occouring?
Would it not be better to reinstall the hp connection manager or preform a system restore point?
Use the programs and features to uninstall the application and then reinstall it from the HP Recovery Manager.
Applications become corrupt like the other files over time.
Unless you really need to your network and bluetooth connections, there is no need to reinstall. It is only a request for assistance.
-
I get a fatal error message during the installation of updates
Cannot install Windows Live Essentials
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
______________________________________________________________
or try Windows Live hrlp Forums
Maybe you are looking for
-
The value of the seed of the generator of random numbers in Matlab node
Hi all I need to use random variables inside a Matlab Labview Commsuite node. I generate with the randn() function. Is it possible to put the seed of the random number generator such as the random numbers are reproducible?
-
TouchSmart 605-1052: Touchsmart upgrade memory 605-1052
The specification for this Touchsmart says he can be upgraded to 8 MB. I tried the two notches of filling with Crucial DDR3 PC3 - 12800 SODIMM (that Crucial sticks recommended and which correspond to the legend of HP). When I rebooted my computer
-
Possible more powerful processor in an old Dell Dimension 8300
I really enjoy to know and to work on older tech and I was wondering what than the more powerful processor chip that was made for the Dell Dimension 8300 was be. I know, I know that this isn't old tech, but why? Thank you
-
DirectX end-user Runtime Web Installer not initialized or something
I tried to download DirectX for a lot of times now, and it does not work! I have a life as YouTube, so I have to make a new video on my next game! But then I have to download DirectX, and as I said, it does not work! Here is the log that I got: 11/03
-
Mail out of Live Mail, Windows 7
My Windows Live Mail was not able to connect with my Comcast Email accout on outbound only for the last 3 days. I get the error message "0x800CCC0E IXP_E_FAILED_TO_CONNECT cannot connect to the server. I have not changed my settings. Incoming is a