64-bit RAID problem with drivers on the Qosmio F30 during installation of Windows XP

Similar Questions

• Problems with drivers for laptop HP650

  Hello

  I have a problem with drivers for this model.
  I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.

  Is there a solution?

  

  Hello:

  This is the driver you need for the PCI SCC.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5225011&prodNameId=5225013&swEnvOID=4062&swLang=13&mode=2&taskId=135&swItem=ob-104656-1

  In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.

  If you don't know how to find the hardware ID, please read the info on the link below:

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH

• Problems with drivers in Lite Touch Deployment (WinPE 6.2.9200, deploying 7 x 64 ENT)

  I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.

  When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.

  Try to resolve what I have:

  > Download the appropriate Windows 8 LAN driver from the manufacturer's website

  > Imported it out-of-box drivers in MDT

  > Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices

  > Updated the deployment share

  > Imported the updated boot image to WDS

  This could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?

  EDIT: See http://social.technet.microsoft.com/Forums/en-US/7562dfc5-ae02-40f0-b082-645a95b8fca3/problems-with-drivers-in-lite-touch-deployment-winpe-629200-deploying-7-x64-ent?forum=mdt

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Problem with script on the master page

  So I have my build script of the unique number bit that I have posted here before... it's on the Initialize event of the field.

  
  

  If (this.rawValue == null) {}
  var d = new Date();
  this.rawValue = parseInt(d / 1000);
  }
  else {}
  this.rawValue = rawValue;
  }

  Which works very well if on the body of the form, but if I put it on the master page it re - initializes (and changes the number) whenever a subform gets shown/hidden. No idea how to stop it from doing this? I tried it on a few other events without a bit of luck.

  I came across another problem with this script, a field called 'Date' was interfering with the script - throw an error "the Date is not a constructor. Is - this normal (function/field collision)?

  Hi Jono,

  I had problems with script within the Master pages before. What I've done in the past, it is a textfield hidden in the main pages of script with overall binding (which featured many here today); then same name textfield in the master page picks it up.

  Good luck

  N.

  Post edited by: Niall O'Donovan

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Having a problem with loading in the combustion chamber

  Hello

  I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.

  Here is the URL of the page to take a look:
  _{Specific link removed by moderator display ~ J99} < sitename >.com/top-10/top...services/

  No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.

  Thanks in advance,

  Mike

  There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.

  P.S. Note only forum content in the resolved threads is now indexed by search engines.

  (Last updated: February 14, 2015 08:45 CEST)

  Solved the locked thread now ~ J99

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version

  I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?

  Yes, see this article:

  • Import bookmarks and data personal from another browser

  After:

  • Update to the latest version of Firefox

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

  I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

  Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

  Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

• Anyone having problems with guides since the update?

  Anyone having problems with guides since the update?

  My guides are everywhere, since I updated my Illustrator last week. The guides are solid lines while they should be dotted (as defined in my preferences) when I'm zoomed out... and then disappear or become dotted but moved when I Zoom.

  It's so frustrating! I can't work like this!

  All the solutions out there?

  Thank you

  lyncylox,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  I think that the issue should be fixed with the 19.0.1 patch.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

• Problem with pdf for the opening of the health gov Web site.

  Problem with pdf for the opening of the health gov Web site. I use my ipad in Safari and have installed the application to adobreader. Healthcare gov support only suggested to disable the pop-up blocker. I did, and I couldn't always open the file. No problem on a desktop computer regardless of the browser.

  In my view, they spend on their web server to a document ECM server authentication. Someone else has the problem?

  I tried the Penguin, Chrome and Atomic browsers on the ipad and the same issue.

  Thank you!

  Keren

  Okay, actually, I think that there is a problem with the type of form. It is a form of a special kind (called a form XFA or Designer, for what it's worth), which can be opened with Adobe Reader and only on Mac or Windows. There is no iPad software that can read these.