6500 and 7600 Series VPN

Similar Questions

• Windows 8 and lexmark 7600 series compatipility

  I've upgraded to windows Vista 8. I use a Lexmark 7600 Series and then continue to get a message «Microsoft.NET Framework version 2.0» required I want to continue to use the productivity studio which came with this all-in-one printer, but go to the Microsoft site and there are several requests options, updates, documents, etc., what is my best option? Do I need another printer?

  From what I've seen, Productivity Studio is not compatible to Windows 8.  Uninstall the printer and reinstall by using only the most recent drivers.  At least you can print.

• "vpn 3002 hardware client" and any other vpn device

  When I do a session between the customer Hardware 3002 3000 and remote site vpn series concentrator or PIX or router to the central site. "Server has" is located at a remote site and 'Server B' is located at the Central site. "Server has ' and 'Server B' communicate with IPSEC Tunnel. I know that "Server A"(sur un site distant) can initiate a session of "Server B" "(central site)." Is it possible that initiate (central site) of "ServerB"a session of "Server A"(remote site)? ".

  Hi sbjeong,

  If you use the NMS on the 3002, two servers can initiate traffic in the event where the IPSec tunnel between your 3002 and Server VPN (PIX, IOS, VPN3K) is established

  Jean Marc

• Difference between the Tecra A, M and S series

  Hello
  What really is the difference between a, M and S Tecra series? Which should I choose?
  It is obvious that the Tecra is supposed to be a high-end standard in the range of the portable Toshiba, but why they do different Tecra series?

  I'm sorry if this has never asked, but can't find the answer.
  And thanks to all who responded.

  Regars,
  -nov

  Hello

  I am user Tecra M and each series has my own opinion design and hardware configuration. The availability of different series can be nice for potential buyers and costumers let them choose the preferred product.

  If you need Tecra for business, I can really recommend laptop Tecra. I use it more than two years and it works like the first day. It is very important that you know exactly what you want to do exactly, and you can choose your favorite.

  If you want to write what you expect from a laptop. It will be perhaps easier to give you a specific recommendation.

  Good bye

• HP 6500 Office Jet: is there a difference between an office jet 6500 and the other with a 'a' or 'more '.

  Hello, first post here.

  They gave me an office jet 6500 without the cd rom set up the disc. The Unit came with 4 new cartridges. Started trying to get to the top and running and first it attracts not paper. Checked this site and resolved that. (temporaily?) Then saw that it was low out of ink. Installed the new trolleys. Colors work very well, but not black.

  I have no cd rom for this and not manual.

  I see that you can download the establishment, but was intrigued by the mention of a 6500 and 6500 more, not sure I have those. On the front it says "HP office jet 6500 wireless.

  So I guess I have to run the cleaning jet. I started scrolling menu, but was rerouted it says there is no connected computer. Do I need to clean the jets?

  I could shoot for today with a work properly stand-alone copy/printer. But I would not mind at all followed with setting up wireless on my sony pcv-rx752 pc. We use at + t here with a wireless router.

  Hello

  First, click on the install button, select network and follow the Wireless Setup Wizard to connect the printer to your home network.

  Then download and install the following drivers for wireless HP Officejet 6500 (E709n) model:

  The 6500 has a different model then one you have...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-3 & CC = US & DLC = in & LC = on & os = 228 & productOid = 3795393 & sw_lang =

  Shlomi

• Floppy disk drives for Satellite Pro 4200 and 4300 series

  I have four portable Satellite Pro - a 4340, a 4310, a 4270 and a 4280 and I have trouble getting the 4310 and 4270 to recognize a particular floppy drive. My understanding is that Mitsumi D353G FDDs were consistent with these laptops 4200 and 4300 series but I can't get the 4270 and the 4310 for «see» They will all be two however 'see' an FDD alternative I - a Pansonic JU-226A202FC, but I only have one of them and two laptops needing a floppy drive replacement. I tried a D353G I know (from my 4280) works in the 4310 and the 4270 but nothing helped. I'm keeping an eye on for an another Pansonic JU - 226A202FC FDD on ebay but no luck so far. It's frustrating because I don't know a FDD D353G expected to operate in the 4270 4310 and I have two spare ones that I wanted to use. I looked in TSETUP.exe and you can see no settings that I can change to make these laptops see floppy D353G so any help or insight greatly appreciated readers. Someone there a 4270 a 4310 runs successfully a floppy D353G drive or is this a quirk and these two particular models were made only to work with a Pansonic JU-226A202FC floppy drive not D353G disk drives? Clues?

  Hello

  Unfortunately, I am not a technician but I guess that there is clearly a problem with compatibility. It is possible that the assignment of pins is different and you cannot use them. If you want to have a precise explanation, you should contact technicians. I'm sure they have diagrams of the motherboard and can give you a good explanation and Tips how to handle this problem.

  Good luck!

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Games similar to the command and conquer series?

  Can someone recommend me a list of strategy games that is similar to the command and Conquer Series(Command and Conquer Red Alert;) Yuri revenge; Tiberium Sun, etc.) ?

  One who can run with this old PC platform:

  Microsoft Windows XP SP3
  Intel Pentium IV CPU 2.00 GHZ
  256 RAM
  Radeon 7000 / Radeon VE Family (Microsoft Corporation)

  Thank you!

  Hi saudate,
   

  Please use your favorite search engine and look for one of these programs that is used but be sure to check the system requirements for the game to check its compatibility with the operating system.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• Differences between 2000 WLC and 4400 series

  In addition to the number of access points supported, what are the differences in features between the WLC 2000 and 4400 series?

  On 2006, you have 4 ports on the back, which can support up to 3 AP directly connected and the port other than your connection to the network and it supports no LAG (aggregation of links). The ports are 10 / 100M, and he cannot be an anchor for a group of mobility.

  On the 4400, either you have a 4402 or a 4404, 2 a 2 interfaces concert and the 4404 has 4 Gig interfaces, you cannot directly connect AP to a 4400. The two 4400's support LAG, and they can serve as anchor points in a group of mobility. What are the major differences in them. They set up near the top of the same and interact with the trendy and the same wireless networks.

• OfficeJet 6500 and router Wireless does not connect

  I just bought an Officejet 6500 and try to connect to my wireless router.  Whenever I try to connect the printer to wireless it crashes.  The power button does not light, but the screen is lit without text.  At this point, I can't close or get it running again.  I am running Vista Business 64-bit, and the router is a 2wire 1800 HG through AT & T.  It works very well with a usb connection.

  Thanks in advance.  John

  I think you just meet a known issue with some printers of HP network with routers 2WIRE AT & T DSL.

  Have identified us the problem and will deploy an update in the future.  So far, the work around is to assign a static IP address to the printer. Here's a way to do this:

  1. Unplug the phone line from the 2WIRE router
  2. Cut the power to the 2WIRE router, wait 30 seconds, then turn on the power.
  3. Go through the normal process of the printer connected to the 2WIRE (Ethernet or Wi - Fi) device. The printer will not crash as long as the telephone line is disconnected from the 2WIRE device.
  4. The Officejet front panel, go to the menu of 'Advanced Setup' under 'network '.
  5. Select 'Settings of intellectual property', acknowledge receipt of the warning and select "" manual IP ".
  6. Select "IP address" and change the last group of IPS (byte) to something higher or lower. Specifically to your 2WIRE router, select 192.168.0.60.
  7. Press Ok and plug the phone line into the 2WIRE router.
   

• Protocols for switches 300 and 500 series

  These protocols are supported by the 300 and 500 series switches?

  • TCP
  • UDP/Unicast
  • UDP/Multicast
  • UPnP
  • RTCP
  • RTSP

  Thank you

  Dear Alejandro,

  If you mean the switch weather can pass through these protocols the answer is a definitive Yes. If you meant something can else you please describe what you mean?

  For example, THAT TCP is supported in a way that it can filter traffic based on the TCP port (layer feature 3 +), so can he do to UDP. Multicast is also managed through IGMP support. About RTCP and RTSP how / why would you use it?

  Thank you and best regards,

  Zsolt

• How to install MX60 and activate client vpn services

  Can someone show me a link or a video that helps install MX60 and activate client VPN services?

  https://KB.Meraki.com/Knowledge_base/small-remote-or-Home-Office-VPN-opt...

• I can't have a log and snmp in vpn

  Hello

  I can't have a log and snmp in vpn when I want to achieve the management interface, or remote access to asdm and ssh is strange ok.it for your help thank you.

  Best regards

  If you want to access the ASA via a VPN connection, you would not use (or should use) NAT.  You only need to add command -access to the administration .

  So let's say you want to use the IP address associated with the interface named inside of handle the ASA.  Then you go inside management-access command

  --
  Please do not forget to rate and choose a good answer

• I'm trying to generate an arithmetic and geometric series/sequence with JavaScript.

  I try to generate an average arithmetic and geometric
  series/sequence with JavaScript. The thing that makes this challenge is that
  I use user input to determine the parts of the formula that I use for
  generate each sequence. I tried running the formulas, but I learned that I was
  channels running through them and not numbers. How to generate my
  sequences/series and always use user input? PS, here's my formulas: (a1-East
  first term, d and r are difference/ratio, and n is the n-th term)
  

  1.) a1 + d * n  

  2.)a1 * r^n

  Entry user of a form is always a string. There are several ways to convert a string to a number in JavaScript:

  • Pass it as an argument to Number()
  • Pass it as an argument to parseInt() (for an integer)
  • Pass it as an argument to parseFloat() (for a floating-point number)

• I downloaded an upgrade LR6 - just got an email that took my 30 day trial period end - I and #s series LR5 LR6 - how do I turn on beyond the trial?

  I downloaded an upgrade LR6 - just got an email that took my 30 day trial period end - I and #s series LR5 LR6 - how do I turn on beyond the trial?

  Go to Lightroom > help >. Disconnect

  1. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /users/folder/Library/Application Support / Adobe / OOBE
  2. Rename the file opm.db in opm_old.db
  3. Launch of Lightroom
  4. Enter the serial number