651 error code when trying to access broadband
Got A error code 651 when trying to connect to broadband.
1 Troubleshooting DAB - did not help
2 off the PC, the modem cable and switch. Disconnected and reconnected cables Cat5. Rebooted devices in the following order: PC, modem, switch.
3 Ran Microsoft Fix it 20140. Said it fixed two things, but still no luck with the connection.
4. ran regsvr32 raspppoe.sys and received the message: "raspppoe.sys" failed to load module. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files. The specified module could not be found.
5. try to rename raspppoe.sys to raspppoe.old in order to replace it and got the message: you need permission of the Trusted Installer to make changes to this file.
Any help on where to go from here?
Keep brainstorming until I thought this myself. Went to the Device Manager and deleted the WLAN device. Restarted PC and it automatically detected a 'new' hardware and driver installed. Direct connection worked. End of the problem.
Tags: Windows
Similar Questions
-
Original title: context: MSI Action failed
Hello: I received the 0xC0070643 error code when trying to install the AVG anti-virus program. What can I do to fix this problem, so I have AVG on my computer? I thank really all those who are knowledgeable enough to help me straighten out it.
Thanks again
Daphna
Hello
1. are you able to install other applications successfully?According to my research, this error message appears if you have traces of a previous installation of the AVG software.Download the AVG remover to remove the previous version and then try the installation again and check.
http://www.Avg.com/us-en/utilitiesThe link below also discuss the matter even.
http://forums.Avg.com/au-en/AVG-Free-Forum?sec=thread&Act=show&ID=114995Hope this helps -
get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search at the above link > manual download them.
If this does not solve it:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: error code 88982F04
Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error." I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC. Can someone please help with an answer.
Thank you
Delete C:\$WINDOWS.~BT
Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.
If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you find it difficult to do some of the steps below, please see instructions how do their:
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
How can I fix C00D199F error code when trying to burn a CD with Windows Media player.
Original title: How can I fix C00D199F error code
Error message when trying to burn a cd with Windows Media Player
Hello
1. what version of Windows Media Player do you use?
2. the specific issue of burning CD using WMP?
3. What is the exact full error message?
4. what you are trying to burn?
5. is the specific question on the disk?
Method 1: You can run the fixit available in the link below and
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox
Method 2: Clean the disc
Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.
Select a slower recording speed and check if that helps.
1. in the Tools menu, click Options, and then click the devices tab.
2. in devices, double-click the CD burner, and then click the recording tab.
3. in the write speed list, select a slower speed.Method 3:
Perform the clean boot and check:
http://support.Microsoft.com/kb/310353
Follow the above article.
If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.Reference: Burn your own custom CDs
Hope the above information is helpful.
-
Today, all the laptops in the House (last FF ver) started throwing the error:
(Error code: ssl_error_rx_record_too_long)
Trying to access any Google products: gmail, Google + Analytics, Google Web site, etc.
-
get the 8024000 error code when trying to install sp2 to vista tried about 6 times
Windows says I have 1 important update, when I try to install the update I get an error code 8024000
I installed sp1 without problem, but have tried about 6 times with sp2 and nowhereHello
Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.
You can not install Vista Service Pack 2 and get the error 8024000.
If you receive the error Windows Update 8024000, it means that Windows Update is unable to read a file (update manifest) that is required for installation.
I suggest you follow the steps in the site:
Windows Update error 8024000
http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-8024000B
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
received the 0x800106b5 error code when trying to open windows defender
I can't open windows defender, when I tried, it will display an error message, the 0x800106b5 error code. Hope someone can help me solve this problem
Hello
I think you may have the incorrect error number
are you sure this isn't: «Error 0x800106ba»
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and read this information to microsoft:
Error message when you run Windows Defender: «Error 0x800106ba»
http://support.Microsoft.com/kb/931849
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial:
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this FREE program Autoruns:
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
Why do I get an 0x8007F0F4 error Code when trying to install KB2686509?
When I try to download the update for Windows XP (KB2686509) Service, I get a window indicating that the update for Windows XP (KB2686509) Service has not been installed. When I look in 'Your review update history', I have an 0x8007F0F4 error code. What this means and how can I remedy so that I can download update for Windows XP (KB2686509 Service?
See this thread:
+
http://support.Microsoft.com/kb/2686509
MS12-034: Description of the update of security for CVE-2012-0181 in Windows XP and Windows Server 2003: May 8, 2012
See: what should I do if the installation of this update fails with the error "0x8007F0F4"?
-
Has 66 error code when trying to install the KB2446708 update
Original title: Net 4 update problems.
I am installing .net 4 update (KB2446708) for Vista, it gives me the error 66 a. code I tried to repair the .net Framework Client Profile and it comes back with not a managed due to a Failure.I of GenericTrust tried to reset the Windows Update components using the tool correction. EC will try next?
I had the same questions... try this link. He took care of the problem of frame and the update worked!
-
0x0000046a error code when trying to connect to a printer on a network and share
I can't connect to a shared printer in the network (on a computer running Windows XP) with my laptop that is running Windows 7. The laptop can find the printer but returns a "failed to connect, the operation failed with error 0x0000046a.
On a separate similar network setup (same model printer attached to a computer which is running XP), the connection works perfectly.
The program installation, above, which gives the printer connect error worked well, until I had a failure to drive on the XP machine and restored the (previously saved) XP operating system. I deleted the printer both XP and Windows 7 computer portable machine and more, but still not the same error.
This utility is completely useless. He tries the 'Add printer' Wizard, reached the error and give up, with no details except the error number.
Can someone help me?
Thank you, jsmith33
Please see this thread:
printing network: cannot install the printer 0x0000046a error code HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com -
I get an error code when trying to update U44M1P36 how can I fix it?
U44M1P36 error code how do I fix this?
U44... Update error http://forums.adobe.com/thread/1289956 can help
-
643 and 646 error codes when tried to install extract
Original title: security updates for Vista and MS Office
I have 19 updates of security that will not be installed. Ten are for MS office 2003, 1 for MS Vista NET Framework 1.1 SP1, and 8 are for MS Office 2007. I keep getting error 646 and 643 codes. I ran the .NET Framework (fix it for me) program automatic (delayed start) the value of the service (Office Source Engine) and then started it. These security updates are not installed. I have auto update installed and started running regularly. I started seeing this problem in June 2010 and have not been able to solve. Could you please help me?
Hi DJMac129,
We recommend that you run Microsoft fix it in the next article, and then try to install the updates.
See code error '0 x 80070646', '646', or '1606' when you try to install the Office updatesVery important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
See how to backup the registryVisit our Microsoft answers feedback Forum and let us know what you think.
-
Windows XP
Hello Jamie-94,
Thanks for posting on the Microsoft answers Forum.
It looks like something has become corrupted when you tried to install or open your application.
I want to uninstall the application first.
Make sure that all the files/folders related to Sony Vegas 8 trial have been removed. This includes My Documents.If the file is a .msi, you can use the Microsoft Installer Cleanup utility.
Click here to download it. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.Otherwise, try to install it again and see if you get the same error.
If still problem, I suggest you post your question in the Forum Sony listed here.Hope this help to solve your problem. Please answer if you still need help.
Sincerely, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Get the 12002 error code when trying to send emails
Original title: mistake in the AJAX request
While he was trying to send mails, I get this message
In the AJAX request error
XMLIhttp State 12002-unknown
Just a beginner with computers
Hello
1. What is the email client that you use to send and receive email?2. the problem occurs in any webmail?
Answer comes back with the answers to help you best.
Hope that helps.
Maybe you are looking for
-
Why most of the files by e-mail in local folders open with the Message Search screen?
Not much more to say. Instead of open and display the message headers and the preview window, most of the E-mail files opens with message search window. It seems that the size of folders or something small to display headers of message, messages in t
-
Should I update my graphics driver in Bootcamp?
As you may know the Crimson AMD came out. I know Bootcamp has a more specific driver so a good idea or not upgrade to Crimson AMD? My graphics card is R9 M370X Thanks in advance.
-
error messages Vista recovery manager
When you try to create error and I get message "not a blank disc in the drive recovery discs." Tried with out-of-box cd and dvd. Same result.
-
I've just spent more than $50 for cartridges for my printer, apparently the kit I bought didn't come with black picture, instead, he had 2 black inks, it had 3 color cartridges. Why is it necessary to have ink in the Photo black cartridge to print? I
-
Original title: STOP: 0x000000F4 (0 x 00000003, 0x89B44CB8, 0x89B44E2C, 0 x 80605666). System becomes error blue screen as follows (STOP: 0x000000F4(0x00000003,0x89B44CB8,0x89B44E2C,0x80605666).)