7510 Photosmart HP printer does not print

Similar Questions

• Photosmart Premium C310a: Photosmart Premium C310a does not detect photo paper in the status bar

  Prints on plain paper e.g. A4, but does not recognize the 6 x 4 photo paper in the tray above, asks me to load paper in the tray.

  Hi @Ebeniste1uk,

  Welcome to the HP Forums!

  I understand that your HP Photosmart Premium c310a does not detect your photo on Mac OS X 10.10 tray. I am pleased to see that for you!

  I would recommend going through this guide, the printer is not Pick Up paper from the Photo Trayand watch this video:

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Photosmart eStation C510 does not print

  Hi my (?) Photosmart eStation C510 printer does not print! I checked all settings changed ink cartridges, it will print a color image, but it will not print black and text is missing from the photo - I cleaned the printheads three times. I found the 'helpline' inaccessible HP and am pretty much scream of rage and frustration. I don't understand why it will not be printed. Printing ink level indicator is not telling the truth because I replacead all the cartridges this morning and he said one of them is half empty! If I see another white page out of this printer I'll cry! I guess it's maybe that black ink nozzle is completely blocked - it's the only thing I can think. Other peoples encountered this problem? and Yes, I restarted, six times

  You both seem to have some problems with printing caused by your print quality.

  Suzyd (and I would like you to try this too, CPilenza), I recommend do you a similar process that is Cipelenza. I would like to open your machine and remove the cartridges and print heads. Then unplug your machine while it is still open. Then use a fluffy cloth (like a coffee filter) and little water to clean the contacts on the back of the printhead (the bumps in copper). Then clean the contacts inside the machine. So shut up and plug it / turn it on. Replace the printhead and cartridges in order ask the machine.

  Sometimes, if the print head is damaged, the part will be replaced.

  The two of you run this software to diagnose your hardware: http://support.hp.com/us-en/document/c02762272

  Let me know the results.

• Help please! Photosmart HP 6510 does not print

  Thank you for taking the time to read this.

  I had my HP Photosmart for about 6 months and it has worked well in the past by for the last two months, I can't get anything to print.

  If I send something to print the printer icon jumps up and down (and does not), when I opened the icon, it says:

  Print "Mocrosoft Word-..."

  Connected to the printer

  and then NOTHING!

  The other day, I spit a page that had been sent to print a number of weeks, but that's all.

  I uninstalled and reinstalled and looked through all the forums, I will find but have had no joy.

  If anyone can help me I would appreciate it really - I'm a mature student and I have a number of essays due.

  Thank you very much

  Hi jojodeb,

  Thanks for the reply.  I would like to reset the printing system, run software update and reinstall the printer with a USB cable.  If we are able to solve the problem effectively, we can then convert the wireless connection to test this type of communication. Follow the steps below and let me know the results.

  A. reset the operating system printing system:

  1. Choose System Preferences from the Apple menu.
  2. Choose Print & Fax on the menu display .
  3. Hold down the Option key while clicking on the "-" (deletion of printer). If no printer currently not added, hold down the Ctrl key while clicking on the button that appears above the button of "+" (add printer), and then choose reset printing... from the context menu.

  B. perform the software update:

  1. In the Apple menu, choose software update.

     
     Menu Apple in Mac OS X 10.6.6

  2. Software update checks the available updates. In the software update window, select the items you want to install, then click on install. Usually, you should install all available updates.
  3. Enter an administrator account name and password.
  4. Once the installation is complete, restart the computer if necessary.

  C. Reinstall printer with USB cable

  1. turn the printer and the computer

  2. connect the USB cable for printer

  3. USB connection to computer

  Note: this should automatically add the printer, if it does not manually add the TI-see below *.

  4. open system preferences, and then click Print & Fax

  5. click on the sign under component printer +.

  6. click on the name of the printer

  7. click on add

  8. test the functionality

  I hope this helps!

• PHOTOSMART HP 6520 does not print black. And the ink levels estimated for the other inks are not correct.

  Hi, I bought my photosmart Hp 6520 year last, October. But it is no more print black after replacing ink twice. I tried to clean the print head with water and tried "clean print head" in tools, does not solve the problem...

  What is wired is that I bought 4 new 564 inks the hp of the target 2 days ago, printed only less than 10 pages to see if the problem is resolved. Then my printer told me that the cartridge is too low... Is this possible?

  It makes me crazy now... What is even worse, I used a tool to detect my printer, and he said that is no longer under warranty... But he was only 9 months... How can I solve this problem? Thank you.

  The document here can help solve the black does not print on your Photosmart 6520.  Be sure to check the vents, as on the three solution.

  If this does not resolve the issue I suggest you call HP (1-800-HPINVENt to the United States, see here for details by the way).  The warranty online tool is an estimate, they will have a process of updated the status of the guarantee if necessary.

• HP Photosmart Plus B210a does not print Magenta

  Hello

  I have already posted in these forums about this, but no answers seem to solve my problem.

  Basically, my Photosmart B210 (who bought last October) does not Magenta print. I went through several cartrides real both HP and brand own PC World and Magenta print never to pages. The estimated ink levels show the Magenta levels accordingly well (full when it is new, empty when used etc.).

  I would like to know what steps I can take to resolve this problem, in addition to buying new cartridges (again!) and turn again and restore to factory settings - that did not work.

  Thanks for your help!

  When the unit will not print a single or multiple color, it is labeled as a print quality problem.

  You can find the steps to solve a problem of printing quality for B210a here.

  I hope this helps!

• my printer HP Photosmart Prem C410 does not start

  Hello

  I just got my HP Photosmart Prem C410 series and a few days ago it was printing leaves for school. I try of the starts today and it won't even turn on. I don't know what the problem...

  does anyone else have this problem?

  Hello sadiedoll

  Please try the following article, as it can help solve your problem.

  Printer does not turn on

• Photosmart 6520 - envelope does not print

  I use Windows 7 and Microsoft Word.  Printing options are set to main tray and the envelope is correctly loaded in the center of the main tray.

  When asked to print, the result is an empty envelope.

  The same happens when I try to print the "envelope" on A4 paper in the main tray.  It seems that Word does not send print information.

  There are no other printing problems.

  Lanzaga salvation,

  Can you estimate the level of ink in its entirety for each cartridge, by looking at the gauge of printer ink?  See the Solution 5

  In Word, an envelope can be set to use a different color ink in the document.  What color is defined for envelopes?  You'll find this under Options , and then click fonts.

  Don't do the setting in Word to agree with the central location of the envelope Feed ?

  When the envelope is printed, the document must be set to print one sided and not print on both sides.

  Does that help?

• Printers HP Photosmart 6520: Photosmart HP 6520 does not print black

  When I print from my Dell Inspiron One 2330 (wireless), the black ink does not work.  I ran 10 Windows troubleshooting link on your site and it did not help.  I printed a "quality report" directly from the printer and the black letterng was very good.  I installed the new (564XL) black ink but it did not help.  Several weeks ago, I installed Windows 10 and until this week, everything was fine.  My printer is configured as a default network printer.  I'm having the same problem when I print from my iPhone 5 and iPad.

  My problem turned out to be a hardware problem - bought a new printer.

• My Photosmart HP 6515 does not print black only.

  Sometimes, I want to print something on the web that has the color, but if I have no color and just want black and white how can I do? I don't see anything on the control panel of the printer that allows me to do that.

  The copy on the control panel function is, I suppose, just for the copy of something you place on top of the screen glass and not to the copy on the web. Is this correct?

  Other printers (such as my old Canon printer) allows me to do black and white.

  Hello

  You can set print black ink using the settings of the printer on your Mac:

  First of all, try to click the menu presets from the print dialog box and select the preconfigured black single preset.

  If this does not appear, follow the steps below to manually create such a "Preset":

  1. from the application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to product model (Mac OS X v10.5 or v10.6) or the button view details (Mac OS X Lion v10.7 / 10.8) see all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset.

• Photosmart 6520: Wireless does not work for HP Photosmart 6520 on 5G, but works on 2.4

  my all-in-one photosmart 6520 connects wireless network 2.4, but does not recognize nor can I manually get to recognize the 5 G wireless. I have 2.4 to print. This printer not 5 G is compatible? or is there a way to force it to recognize and work with 5G?

  The Photosmart 6520 wireless works on 2.4 GHz channels, it does not support 5 GHz. If your router supports both it should be possible to set up to allow communication between the computer on the 5 GHz access point and the printer on the 2.4 GHz band.

• hp photosmart 6515 software does not work after installation, click on the icons on the screen and nothing...

  I have a fairly (1 month) new HP Photosmart 6515e bought at Costco, replaced the ink installation cartridges with new ones at Costco and had to reinstall the software, but now it does not work. the icons are on the screen but when I click on the hand that resembles a printer, nothing happens, I have uninstalled/reinstalled several times nothing helps, have you tried the USB connection or Setup wireless, still no go, have an edition HP Pavilion p6267c running Windows 7 Professional 64-bit, 8 GB of ram all drivers updated. Help!

  Windows is the problem, I did a ton of googling and many people have the same problem with different printers, etc. I'm wasting my time here, please delete my profile, thank you.

• Photosmart D7260: D7260 does not illuminate

  I turned off the printer using the power button. Now, I can't turn it on.

  I cut the current unit and the mains, wait for the green light from the transformer came out, reconnected to the mains and to the printer. The switch light does not come. The Cancel button is lights up the button print photos to the printer doesn't exist.

  Any suggestions?

  Thank you

  Frank C

  Hey there @FrankGC!

  Thanks for posting on the HP Forums!

  I should be able to help on the printer turn on/off do not.  You mentioned that light to cancel it and the light of the picture are on if the printer is powered.  The first thing I suggest is to plug the printer into the wall directly if there is currently a power surge protector or extension cord. This may sound silly, but this will ensure the printer gets full power and can eliminate any unnecessary troubleshooting. If the printer is no longer becomes full power of power against power surges or extension cord it can give false errors, have bad connection, questions and quality of paper feed problems.  It is also a good idea to try a different wall jack if the printer is already directly to a wall outlet.

  Here is a document about the flashing light errors on the printer: blinking lights on HP Photosmart D7200 and D7400 Printer Series.

  I recommend to check this document to see if there is a paper jam in the printer: a 'Paper Jam jam. Claire then press OK. "Views for HP Photosmart D7200 Printer series D7400.

  It would also be a good idea to check for a jam in transport as well by clicking on this document here: A 'transport Jam' Message is displayed for HP Photosmart D7200 and series D7400.

  Let me know if this helps solve the issue with your printer!

• Photosmart HP 6520 does not recognize the envelopes in Word for Mac

  I've been printing envelopes #10 my Mac from word on my old HP 309n-c with no problems.  I now have the HP 6520 and it does not recognize the envelope size.  I was in and made sure the print properties were positioned and I still get the error message that I have not match the paper size.  Any suggestions?

  Hello

  Choose file > Page Setup. Choose Page attributes from the settings menu, and then choose any printer from the Format pop-up menu for. Choose any printer ensures that your document can print on any printer that supports the paper size that select you.

  1. • If the Page Setup is not available, choose file > print. If the print dialog contains only two pop-up menus and some buttons on the bottom, click the triangle beside the printer pop-up menu.

  2. Choose Manage sizes custom from the paper size pop-up menu.

  3. Click the Add (+) button.

  4. Double-click the name of the paper size, and then type a new name.

  5. Enter values in the fields the paper size and margins of the printer and then click OK.

     Note: Make sure that the envelope is placed in the center of the printer with the flap upward