7610: print envelope A10 from one Android device on printer Officejet 7610

HP Printing Service decision-making in available on Google Android game seems to settle and open normally.

The printer is a wireless HP Officejet 7610 large Format printer.

After an address in Word (on Android) and or Google Docs, try to print an A10 wireless phone

in case of failure.

A10 is available in the printer plug a properties box. Checked.

However, when you use the actual Print Setup dialog box, the drop-down menu to select the paper shows only letter and A4.

Tried by selecting different combinations of size "checked" in the sheet in the Properties dialog box. could not get the A10 to appear in the printer setup menu.

A10 was also selected in the properties of real printer on the laptop.

Hello @ibjman,

Welcome to the Forums of HP's Support. I understand that you have a hard time, printing an envelope of A10 from your Android device. I would like to help.

I couldn't find a reason for the software to reject the size of the A10. I went another way and looked at the material instead.

You can find the following link handy. Specifications for the HP Officejet 7610 and 7612 large Format e-All-in-One Series (H912)

I went through the list of supported paper sizes. The Officejet 7610 does not support size A10 envelopes.

The application supports the paper size. Given that the printer does not work it only allows you to print with this size. This isn't a good answer, but it is a solution to the question: why you can't print in cell A10. Or a Kudos. Let me a Kudos.

I hope this helps. If you need other assistance please let me know.

Tags: HP Printers

Similar Questions

  • How to print from an Android device via bluetooth?

    You had purchased the Mobile 100 Officejet printer to print from your Android device via bluetooth.

    You have paired with bluetooth devices, but do not see an option to print or the "print" key does not work in this case.

    Well, here is how this can be accomplished in Android.

    For this example, I'll use the steps to print a photo.

    1 pairing.

    2. open the photo you want to print.

    3. Select the share option (for example can send to aid based on the version of Android).

    4. Select Bluetooth.

    5. Select the printer in the list of devices.

    6. the file will be sent to the printer.  You can check the notification area upstairs to check on the status.  It may take a few minutes to send at the end.

    7. it must then print the photo.

    Bluetooth HP printers support printing of photos only, but a third-party application can be used to print documents and other items.

    Hope this information is useful.

    I know there has been many cases of users who were not able to print via bluetooth since an Android device.

  • Printing photos from your Android device

    Have you tried printing of photos from your Android (Nexus, HTC, Samsung, Sony etc)?

    http://www.HP.com/United-States/campaigns/mobility/#Android-tab-new

    Some people have reported problems with uneven borders when you try to print 4 x 6 and 5 x 7 photos (see the example below to correct photo size v's photo with uneven borders)

    If you encounter this problem, I advise you to download the free HP ePrint APP from The App Store or Google's game, that allows you to print perfect borderless photos.

    I hope this helps.

    I work for HP.

    Carrie

    Although I am an employee of HP, I speak for myself and not for HP.

    Say 'Thank you' by clicking on the star of congratulations in the post helped you.

    Please indicate the position that solved your problem as "acceptable Solution".

    Hi @Shania2015

    If you print from the Galaxy Note tab to get borderless photos I would like to download the HP ePrint APP from the following location, because you can go and edit your photos and all here.

    HP ePrint PlayStore APP

    Let me know how you go.

    Thank you

    Carrie

  • Cyan fails from one page to another on Officejet Pro K8600

    I have an Officejet Pro K8600, installed on XP. A nearly full cyan stopped working in the middle of printing from one page to the other - tried all the patches.  No msg error - says all cartridges are full. Buy HP new cartridge, always did the same thing. I uninstalled and reinstalled this morning. First page of diagnostics showed labour cyan on the first block, broken on the second line. Then would not work again at all. Do I need a new print head? The health of the print head shows that both are OK. Thank you! Very frustrating. It's a good printer!

    The Officejet Pro K8600 has ink cartridges that are separated from the print head Assembly.  The pipes of the unit ink cartridges in the front lower left of the printer internal for the print heads.  With this type of printing mechanism, a print quality problem, for example a missing color, usually resides in the printheads of the unit.

    I'll try to run 3 levels of the print head cleaning utility in the part of the Toolbox of the software for this printer.  Thus, there is a document with steps to help solve a problem of print quality in the K8600.  The document can be accessed here.

    Let me know how it goes.

  • OfficeJet Mobile 100: Printing from a Bluetooth for Officejet 100 Mobile Android device

    Can I use my new "HP Officejet 100 Mobile" to print documents from my Android Samartphone?

    But I managed to pair the printer, cannot connect to it.

    Or I'm wasting my time trying to print from Android?

    Thanks for the information Banhiem,

    I think that I hurried and bought the wrong printer
    I needed a printer, I can take mobile in a truck and be able to print invoices from an Android device.

    I just assumed that the printer as it had Bluetooth would be able to print from different sources.

    I'm very disappointed because I can't make it work even on a USB cable from the desktop computer or laptop.

    See you soon!

  • My Android devices wil not wake my printer to power saving Mode

    I have an istalled of color M276nw MFP HP LaserJet Pro 200 as a wireless network printer. I have several computers with any operating systems XP and Windows 8, which wakes up the printer to the power saving without problems. I can also print wireless from my phone Windows 8. The problem is when I try to print from my Android devices. I installed the HP all-in-one Remote App on the Android Store and they seem to be installed correctly. They recognize the network printer, tell me that this is the energy saving mode, but are unable to wake him up. Can anyone help with this one please?

    The version of Android on the Tablet is 4.2.2

    Hello Jerends and thank you for your attention to my printer problem. My printer has a fixed IP address so no need to go this route. I managed to work around the problem by deleting the HP all in one application of my Android devices and its replacement by the HPePrint App. It is not perfect, but does the job.

    Thanks again.

  • Can I print from my android phone?

    Can I print from an Android phone?

    Hello Pepa-Lola,

    Yes, depending on the printer, you must download the House ePrint and Biz app and able to print from your Android device.

  • HP 7525: Loading & printing envelopes A10 - getting started

    I was not able to locate instructions for loading and printing of envelopes. Where to start?

    Are there templates or do I use trial and error with a word processor, guessing where printing can appear when I fed an envelope?

    With the help of Windows 8 and primitive processor, MS Wordpad.

    Feed envelopes into the tray paper, or from the top of the charger page? Rabat open or closed?

    Anyone know where the signs for this can be found?

    Thank you.

    Happy new year.

    Hello

    I don't know how to print envelopes from Wordpad (it is noot allow you to create the envelope anyway). But for the loading of the A10 envelopes, please use the following instructions (manual page #14):

    Load the envelopes
    a. lift the photo tray.
    ❑ Slide width outside guide.
    ❑ Remove all paper from the main tray.

    b. load envelopes.
    ❑ Insert one or more envelopes in the far right of the main input tray, with envelope flaps on the left and upwards.
    ❑ Slide stack of envelopes until it stops.
    ❑ blade width guide inward against the stack of envelopes up to the stop.
    ❑ Lower the photo tray.

    Kind regards.

  • Printer OfficeJet 6700 Premium - features iOS5. Cannot print from devices

    Printer OfficeJet 6700 Premium with latest firmware update as of August 25, 2012. Apple iOS devices 5, iPhone4 and iPad (v3) devices with installed AirPrint. The printer is visible and selectable from Apple devices.

    Of any one of the two devices, I select the print option and wait for the document to print. No document print devices.

    Not sure what the next step.

    Hello

    Try to bypass the temporarily from router to refuse any multicast router question:

    Click the icon on the printer wireless, and then click settings.

    Select Netowrk default settings and confirm any command prompt.

    In the menu Wireless select Radio wireless and make sure it is set to.

    IOS click settings, and then click Wi - Fi.

    Select the SSID printer include 6700 in his name.

    Allow 3 minutes for good to set the connection.

    Now, reconnect the printer to your router by entering the same wireless settings and follow the wireless configuration wizard.

    If you were able to print without similar problems, it means that the router is causing the problem.

    Unplug it for a minute and check for the difference.

    If there is no change, please specify your router brand and model.

    Kind regards

    Shlomi

  • Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

    Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

    I'm going to assume that you plan to have wireless devices.

    Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

    Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

    In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

    If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

  • HPePrint gives paper mismatch error when I try to print from my android phone

    I have 5 x 7 paper in Photosmart 7520 printer and when I try to send a photo from my android phone to the printer, I get a paper mismatch error. It will print 4 x 6? I can't change a setting somewhere?

    OK, go to the ePrint app, select what you want to print once you have print preview, select settings. Then, select paper size.

    Let me know if you have any problems finding this option.

  • How to copy a profile for a child from one device to another family safely direct windows for Windows 7

    How to copy a profile for a child from one device to another family safely direct windows to Windows 7? I have several devices on Windows 7 and my child has ins journal to each device. I want safety to be entirely copied from one to the other devices. How can I do?

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for your query details.

    I also appreciate your concerns about security for the family.

    I suggest to read the following article and check.
    Reference:
    http://Windows.Microsoft.com/en-us/Windows/set-up-family#set-up-family=Windows-7

    See also this wiki article created by Lonnie_L on August 24, 2013.
    Family Safety: frequently asked Questions
    http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • How to print from my android phone (Droid X 2) on my printer (HP 8600 +)?

    How to print from my android phone (Droid X 2) on my printer (HP 8600 +)?  I send a pix of my phone to the email address of the printer, but it does not appear on HP eprint print jobs.

    Hello

    Please check check this for the installation program:

    https://play.Google.com/store/apps/details?ID=com.HP.Android.print&hl=en

    Good luck.

  • not the case in the present site gives a phone number to explain my contract, I can move from one computer to another? How can I set up for printing to Adobe

    Not the case in the present site gives a phone number to explain my contract, I can move from one computer to another?

    How can I set up for printing to Adobe

    So far, it is not necessary for a person no-tech.

    If you have a normal single-user license or subscription, you are allowed to have two active facilities as long as you use only one of them for the software at the same time.  You can disable and re-enable them if necessary to install on another machine.

  • folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

    Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

    When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

    It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

    Any thoughts?

    Hi @Bodija ,

    I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

    When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

    Here is a document to clean the rolls of paper to see if that will help.

    A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

    Go to Solution 5: clean the rolls of paper.

    Using the full feature software drivers?

    Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

    Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
    Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)

    If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

    If you still have problems with it is software related, try the following steps.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    Try to print again.

    How the name of the printer was placed in printers and Scanners?

    If you need help, let me know.

    Have a wonderful day!
    Thank you.

Maybe you are looking for

  • 5 s screen white iPhone?

    Hi all (32 gb, iPhone 5 s after the warranty, protected with Mophie juice more, intact screen, OS update status unknown) Was checking my emails as always when I clicked through an Amazon site it seem'd to fight a small display of an image from the br

  • Disabling (annying) internet-back and forward key

    Does anyone know if it is possible to disable these two buttons in the box of the arrows on the keyboard, which makes you go back or forward on a browse internet? They caused me a lot of frustration when you write a webmail, hitting them accidentally

  • Can I safely remove old security updates Windows

    I have Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3. I checked my system under ADD OR REMOVE PROGRAMS and I have a lot of updates: Security updates and the updates for Microsoft Office 2007 productsSecurity updates and update

  • Problems with Isatap adapter and Wirelesss network.

    The system is a sony viao and it's a windows vista too. It is impossible to connect to the wireless network. I checked Device Manager and noticed that the map isatap #4 and #5 do not work properly. How can I solve this problem? Separated from the: ht

  • When I try to use the Skype window having problem

    When I try to use the Skype window having problem