775th HP Pavilion desktop computer: what Solid State hard drive to replace Maxtor 6Y080L0

Similar Questions

• Replacement Solid State Hard Drive not recognized at initial startup

  I recently bought a Dell 30GB HDD solid state replacement for go in a Latitude D620. I was able to load windows from the recovery CD and drivers put on it, but started to see some issues with the startup. If the machine is off and that you try to make an initial power on the system does not see the HARD drive. If you press f1 to try anything again. If you put off and power on nothing. If reset you it using ctrl-alt-del it see the car and starts successfully. It seems as if the reader must completely lights until the system tries to access it, but that's just a guess. Any ideas as to what is the real problem or how to fix?

  
  

• Solid State Hard Drives in Satellite Pro P750

  Toshiba Satellite Pro PSAY3A-0MR001 P750
  I need to know if I can install a drive hard solid state in Sat Pro P750 PSAY3A-0MR001 and then run the recovery cd disc set.

  Of course you can do it. I did it on my old Satellite P500 and it works perfectly.

• T61 new solid state hard drive Code STOP 07 b - WinXP

  I replaced my faulty hard drive with a disk hard solid state by using the rescue and complete the recovery using the recovery CD for Windows XP.  He completely loaded; However, upon reboot final after loading 6CD, I get a stop code and it restarts only to stop again.  Any ideas?

  
  

• W530 Solid State Hard Drive Compatibility

  Is my Lenovo W530-2436-CTO compatible with Samsung 1 TB 840 EVOSolid State hard disk?

  Hello.

  Yes, it is compatible and a very good SSD too. I have nothing else of great things to say about the EVO.

• 7010 OptiPlex desktop computer - adding a 2nd HARD drive?

  Is there place, in the case of funds 7010 for a 2nd hard drive?  And any other necessary mounting material is none other than the screw, then an additional SATA cable?

  Thank you

  Robert

  Bardi

  There are four different versions of the Optiplex 7010, Mini-Tower, desktop, Small Form Factor and the Ultra Small Form Factor.

  Assuming you have the desktop version and not the minitower.

  The desktop version, can support a 3.5 "or 2 x 2.5" SATA drives.

  You will need a basket of 3.5 "x 2 x 2.5" hard drive, plus one SATA data cable and possible a SATA Y power splitter.

  Bev.

• Tecra A11 - problem of solid state hard drive boot

  I have a PTSE0A A11-088021 and try to install a Kingston 64 GB SSHD.
  When I boot it is displayed in the POST and also in BIOS.

  When in the environment of installation of Windows 7 pre drive appears in "where do you want to install windows. I can see the disk and partition, delete and create a new partition.

  Message "Windows cannot be installed on disk 0 partition 1. (view details).
  Details > Windows cannot be installed to this disk.
  The computer's hardware may not support booting to this disk.
  Ensure that the drive controller is enabled in the BIOS of computers menu.

  I checked the drive in the BIOS and seems to be in order.
  Are there drivers controller required for this drive? Material of Toshiba or Kingston?

  Does anyone know of a necessary controller driver because I searched on the web and can not find the driver for this drive controller.

  I don't think that there are all the drivers should install windows on a SSD drive, but there must be something out there. Help appreciated.

  Hello

  Don't try to install Windows 7 no driver special controller is necessary because Windows 7 already contains the controller from Microsoft to address common driver.

  Just a question: was the formatted SSD drive and the new partition created before trying to install Win 7?
  Should be done

  Using the Toshiba Recovery disk in order to install the system on this SSD drive?
  Must use this disk the recovery disc could be created using the recovery disk creator pre-installed Toshiba which was part of the system pre-installed and configured by Toshiba

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,

• 0x8E5E0247 of error after installing a SSD Crucial of 512G on my HP Pavilion desktop computer

  I get this error even after installing a 512G SSD-Crucial in my HP Pavilion desktop computer.  I cloned it from my previous hard drive using Acronis 2014 edition.  I don't know that they are connected.  I called Crucial and asked if there were drivers more recent etc and the answer was not.  Any thoughts?

  Original title: error 0x8E5E0247

  Hey, Cliff,

  Thank you for visiting Microsoft Community.

  I understand that you get an error code with your SSD.

  Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

  One of our community member had the same type of program where Glenn24 responded on 25 January 2011.
  Please refer to this and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Troubleshooter-error-0x8e5e0247/3d46f7a4-4433-41C8-aba6-e42a3532614e

  Additional information:

  If you have an Intel based, visit the Web site below and it will automatically scan your computer and give you updated information on the pilots.

  http://www.Intel.com/p/en_US/support/detect/

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• What kind of hard drive is HP Pavilion dv6700. its about 7 years

  its running vista, but the computer will not start all the way.  I did a diagnostic test and it said to replace the hard drive so im wondering what kind of hard drive is in it.   What is happening is the load on the computer to the microsoft, just before you put your password and then just stays black.

  Piece of cake on your model.

  If the test indicates the disk needs to be replaced, I would not argue against this info.

  You can try reinstalling the operating system before you buy a new HARD drive, but if it doesn't, then you know that the drive is kaput.

  Here is the link to the service manual.

  R & R procedures are in Chapter 4.

  http://h10032.www1.HP.com/CTG/manual/c01295877.PDF

  You will also need to reinstall the operating system. You can see if the recovery discs are available by contacting HP technical support.

  If you can read the product key of MS Vista 25 characters on the bottom of your PC, you can do your own Vista installation disc and allows to install the operating system.

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them on my hp dc7100 CMT PC desktop computer, they worked perfectly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  This is where I buy my PC hardware:

  At the top of the drive of 250 GB 7 200 rpm of line:

  http://www.Newegg.com/product/product.aspx?item=N82E16822136279

  A 250 GB drive to 5 400 rpm standard of good quality.

  http://www.Newegg.com/product/product.aspx?item=N82E16822236238

  You must transfer the caddy, the screw and the connector from the old HARD drive to the new, so nothing to mix until the job is done.

  Paul

• Pavilion HPE H8-1234: what hard drive to replace current for Pavilion H8-1234

  The hard drive I have now is HDS721010CLA630 SCSI Disk Device with 1 TB.  This is bad.

  I know its SATA 7200 rpw, NTFS but otherwise unknown and I'm not a computer geek. Using Win 7 Pro 64 bit

  I use Carbonite reflection WD 4 TB my book external hard drive and my current hard drive (going bad) is now imaged. I was told the new replacement hard drive should be similar, a little bigger is ok, but cannot change otherwise the card mother or any other pilots, summer, etc or the restore image will not work.

  What features of hard drive do I buy that resemble what is the system now? The new hard disk can be bigger (2 TB would be great), but most of another must be similar to the mirror image can be used to restore as well as Win 7 Pro and Outlook 7 configurations and all to a new internal hard drive.

  Western Digital, Seagate seem reliable, but I'm unable to understand other descriptions such as sata 3.0 vs 6.0, red, black, cache memory 64 MB instead of 32 MB whatever that means? What should I choose?

  Any thoughts on what kind of buy that is compatible with the motherboard and others on my system would be very welcome!

  Thank you very much!

  Hello.

  On descriptions of hard drives, HARD drive cache refers to the amount of data, the drive is able to get ready for treatment. Essentially the more Mo - better, but as Big_Dave says:

  «the performance between a cache 32 MB or 64 MB would be negligible unless your PC is running an interactive application of DB.»

  SATA is a computer bus interface that is a standard for connecting hard drives in the computer systems. There are three types that are retro-compatible and have different transfer rates - SATA I is 1.5 Gb/s, SATA II 3.0 Gb/s and SATA III is 6.0 GB/s.

  Regarding the colours of WD, each player has a build-in features specific which makes it good for different purposes. So according to what you are going to do the HARD drive, I recommend a different color.

  For example, WD Blue is a regular daily reader that is most commonly used for ordinary calculation, workloads and play of light and combined with SSD. He is quite able to run most of the games as well as many programs for editing or programming. http://products.wdc.com/support/kb.ashx?ID=S7uxm7

  WD Green is your energy-efficient drive that works cool, calm, and saves a lot of energy. It is designed for secondary storage and backups, and these characteristics allow it to be an excellent choice for quiet versions of backup or archiving. http://products.wdc.com/support/kb.ashx?ID=iTh9tK

  WD Black is the record of performance of the consumer of WD. It is the fastest among them and has a built-in dual-core CPU that makes the ideal player for multitasking. It is designed for heavy games, large workloads and the intensive use of file. http://products.wdc.com/support/kb.ashx?ID=hSoUcT

  Hope this helps, and feel free to ask any questions you may have.

  See you soon!

• Seagate Free Agent Desktop does not recognize my hard drive in Windows 8

  My Seagate Free Agent Desktop does not recognize the hard drive on my new computer with Windows 8. Although I can still use it to save and transfer all the data from one to the other, I lose the functions in the menu of the Seagate such as backup and synchronization. It worked fine on my old computer that worked on Windows XP. I tried Troubleshooting compatibility mode and that did not help.

  The message in the Seagate Manager appears as:

  None of the external drives have been found. Make sure that your external drive is connected and turned on.

  [Moved from comments]

  What brand and model exactly.

• What is a hard drive hybrid

  novice in computers here... Please tell me what is a hybrid hard drive? I was Mobile shopping and it was an option, and then I was unable to select an SSD as an option.

  (1) what is a hard drive hybrid?

  (2) which is better/more fast?... (1) a disk hard of 750 GB hybrid with a solid 32 GB set out by car or 2) a 750 GB HDD hybrid with HP protectSmart hard drive and does not allow the addition of an SSD.

  THX, Mo

  Hello

  1. Hybrid HDD is a new generation of HARD drives, you can find more information at the following link:

  http://en.Wikipedia.org/wiki/Hybrid_drive

  2. for single, hybrid HARD drive HARD drive is faster but with in a machine, the SSD + HDD is faster and more expensive too.

  Kind regards.

  Edit:

  Well, thank you Paul - you are faster than me.

• Pavilion dv6: I did now the hard drive on my HDD test failed and the pavilion dv6

  The problem is that my laptop when I start it it takes like 10-15 minutes to load.

  I see loading windows xp logo and then he is suspended for more then 10 minutes or more.

  Now, I tried to do a test for the material. I turn on the laptop and click the F2 key and I entered the test screen of hp hardware. I moved start test drive hard and after 5-10 seconds or if stopped with a test failure:

  That's what I see now on the screen of the laptop:

  Test Drive: 1

  INTELLIGENT control: PAST

  DST short: FAILURE

  FAILURE ID: 64WE1A-5BC7Q7-XD003F - 60Q 903

  PRODUCT ID: XE041EA #ABT

  Hard drive 1

  Edit:

  I tried now all the other tests in the F2 screen, and they all went except the short DST hard drive that has failed.

  Better to buy a new hard drive and replace it with this one and I install the new OS on it own?

  Test drive: FAILURE

  Does that mean ID failure? I need to replace with a new hard drive? If so can I buy a new hard drive and replace it only with myself?

  I did no other reviews but I want to first of all understand what it means to id of failure.

  Hello

  The hard drive is faulty defiantly and Yes should not replace. Failure ID is given, so if your laptop is under warranty you can give this to HP and it will then allow you the replacement

  Usually the instructions on how to replace the hard drive are in the manual of your computer that you will be able to get a copy on the HP site. You can also buy the HP installation media which will be operating system files on your for reinstall on the new hard drive.