7813R and LV 2010 SP1
Everyone was able to use the 7813R LV 2010 SP1?
I can't compile the screws for this card that contains an old model of FPGA Xilinx, which only is not supported by the new version of the compiler, but I begin to suspect that the so-called 'automatic' choice of compiler by the FPGA module version doesn't work at all as advertised.
It would be a new case of obsolescence of hardware accelerated due to the compatibility of the software non-vers the back... that people should be aware of!
To make a loooooong story short, I finally managed to solve my problem (with the help of NEITHER, well it was mostly trial and error).
The symptom is that the compilation, LV 2010 SP1, an FPGA VI with a target 7813R failed when calling the worker of the compilation. The classic message, I got in the status window read something like this:
Compilation failed due to a Xilinx error. Details: ERROR:Portability:152 - There is no readable fileset.txt filename in the list of MYXILINX or XILINX environment variables INFO:TclTasksC:1850 - process run : Synthesize - XST is done. ERROR:TclTasksC:process_077 - process run : Failed to complete. Please inspect the log and report files. false while executing "process run "Synthesize - XST"" (file "C:\NIFPGA\jobs\hGu8YnF_Zo5e2VV\synthesize.tcl" line 20) ERROR: RunTTICInit::GetIseVersion - Could not find "fileset.txt" in the Xilinx path, unable to get the ISE Version. ERROR: RunTTICInit::GetIseVersion - Could not find "fileset.txt" in the Xilinx path, unable to get the ISE Version. ERROR:Portability:152 - There is no readable fileset.txt filename in the list of MYXILINX or XILINX environment variables ERROR:Xst - "fileset.txt" is missing at "C:/NIFPGA/programs/Xilinx10_1/ISE". This is an invalid product location or is corrupted. Process "Synthesis" failed Start Time: 6:08:10 PM End Time: 6:09:01 PM Total Time: 00:00:51
I also had another error if I did not launch the worker compile manually before you start the compilation, but this one was relatively easy to fix (just run the worker manually compile!) Weird, but life is).
The problem, when it reads the message, is that a file is missing in the folder of the ISE. I tried to uninstall, reinstall and repair the FPGA Toolbox from the Web site of NOR and still no trace of the fileset.txt...
Fortunately, I have another computer on which I have installed the same configuration (and to which is attached the 7813R) and there, I found the file missing (as well as some readme files). I just copied and pasted on my development computer. This seems to have solved the problem and the compilation now crosses without problem.
I have no idea why the damn' file was never installed in the first place (a similar file is installed with the 11.5 compiler, but has a different content).
HTH.
Tags: NI Software
Similar Questions
-
Sharepoint Designer 2010 SP1 ThinApp 4.7.1 license question
Hello
Environment package:
Clean the Germans SP1 Windows 7 (32 bit)
Production environment:
The Germans SP1 WIndows 7 (32 bit)
Office 2010 installed in native mode
4 natively installed .NET
After downloading and installing the new Version 4.7.1 tried to package Sharepoint Designer 2010 SP1 on a platform of German language of 32-bit SP1 of Windows 7.
I followed all the steps as copies lines eliminated in HKEY_LOCAL_MACHINE text file and adds the config.xml file in the SharePointDesigner.WW of our KMS server. and all the other things mentioned.
Ist KMS available and accessible (ping and rdp tested).
I also made sure that the Office Software Protection Service is stopped before the scanning of the post.
I also tried to install the Microsoft App - V package and set up Sharepoint Designer before the prescan (offvirt.msi SPD = 1).
But I still have the problem of licensing to :-(
By the way: since version 4.6.0 Visio and Project 2010 SP1 run as thinapps next to a natively installed Office 2010 without any problem (does not cross functions :-)).)
He worked just to do the following steps:
1.) app - V installed and registered Visio and Project (OffVirt.msi VISIOPREM = 1 PRJPRO = 1)
Pre-scan 2.)
3.) installed Visio/project with SP1
4.) start Visio / project
5.) stop the Office Software Protection Service
Postscan 6)
= > Both Visio and project works well alongside the native installed Office 2010!
Good to hear that.
Yes, I suppose that the App - V installed locally is the origin of the problem.
-
Patterns of data record TestStand 2010 SP1 default shared this cluster in two tables stored as binary data, resulting in two graphs displayed in the report: one for data and one for X data Y. We need the elements X and Y, couples on the same graph. This cluster is marked for logging as a step output variable. It seems possible to add a table "PROP_XYGRAPH" (similar to the PROP_ANALOGWAVEFORM) to the schema to simplify the other treatment after the database record, but how can we get the Builder, to accept this type of data is displayed correctly? XY graphics come from LabVIEW 2013 SP1 exclusively as a cluster of two matrices, usually between 500 and 1,000 items long.
... Geoff.
Hello Geoff,
Had a few resources for you to check. Let us know if none of them work for you.
Inserting an image of LabVIEW Control:
<>http://www.NI.com/example/30736/en/ >
Display of graphics in TestStand:
<>https://decibel.NI.com/content/docs/doc-38945 >
Display of measurement data in the shape of graph:
<>http://zone.NI.com/reference/en-XX/help/370052J-01/tsref/infotopics/measurement_data/ >
See you soon!
-
The PSC-2000 is programmable with LabVIEW 2010 SP1 / Real Time 10.0.1?
I have a PSC-2000 camera I want to use for a small project. I see on the site OR that it is said»
- "Support for LabVIEW Real-time 8.5.1 and earlier" and "Support for Windows Vista and earlier versions. It means that I can not use the latest version of LabVIEW (2010 SP1) with time real (version 10.0.1) running on a Windows 7 computer? If not, what version of LabVIEW, real-time and operating system do I need?
-
Ring type constant def not updated for LabVIEW 2010 SP1
I have a problem with the update of the control ring LV 2010 SP1 constants. If I change the values or names of elements of a ring of control that has the defined type (type def or type strict def) my constant schema do not update. The constants are set to Auto-Update of type def and if I right click on the constant, change to a control and then back to a constant, they update very well. And if I have a control/indicator on the comic it refreshes also very well.
Anyone else seen this problem or can someone seeks to duplicate?
LV 2010 SP1 bug?
Thank you
Dan
It is not a bug. See here - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125
-
The VI "Set the position of the file" went 2010 SP1 for 2014
The VI 'Set the position of the file' has changed since 2010 SP1? I use 2014 and have converted the program of 2010 SP1 in 2014. It seems that the behavior is different, specifically with the default settings when not wired.
There is no change that I see. What is your problem? The function always set the default start position.
-
I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!
If I where to install SP3 I would choose to download the
file and don't use automatic updates.Where to download the SP3 Setup file:
(The file is large but only installs the components required by your PC)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
OR http://www.microsoft.com/en-us/download/details.aspx?id=24How to obtain the latest Windows XP (support CD or download) service pack
http://support.Microsoft.com/kb/322389Your computer must be at least level SP1 or SP2 SP3 will not be
install on XP Gold.I would also create a "save image" of my front disc
to install SP3 just in case you have problems.
Not having any Image backup software:
Try the 'True Image' (has a 15 day trial version available)
http://www.Acronis.com/homecomputing/products/TrueImage/If you use a third-party firewall brand, of course, it is up to date (latest version)
Install SP3 in mode "clean boot":
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Overview of Windows XP Service Pack 3
http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."The space of hard disk required for Windows XP Service Pack 3
Describes the space of hard drive required for installation
Windows XP Service Pack 3 (SP3)
"For a PC on which Windows XP is already installed"
http://support.Microsoft.com/kb/947311/en-usInstall Windows XP Service Pack 3 (SP3)
http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspxRelease notes for Windows XP Service Pack 3
http://support.Microsoft.com/kb/936929/en-usList of fixes included in Windows XP Service Pack 3
http://support.Microsoft.com/kb/946480/
Steps to take before you install Windows XP Service Pack 3
Recommend the steps to take before you install Windows XP Service Pack 3.
Also includes troubleshooting information.
http://support.Microsoft.com/kb/950717/en-usJ W Stuart: http://www.pagestart.com
-
The CVI 2010 SP1 download link works?
The downloaded file from SP1 link seems to be the unserviced pack version. After the 'install' which took place much too quickly, the help > about shows LW/CVI 2010 Version 10.0.0 (360). Am I missing something or am I just too early?
Hello
There has recently been some changes made to the experience of downloading on ni.com. To get the latest download for the ICB, please visit ni.com/downloads. There you should find the LabWindows/CVI 2010 SP1 download.
Let me know if you have any problems,
NickB
National Instruments
-
How to sit interface with matlab 2010A and labview 2010
I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
photos of errors are attached.natasftw wrote:
http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand. In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426
The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.
Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.
Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.
-BTC
-
TestStand 2010 SP1 supported Mac operating system?
Hello
TestStand 2010 SP1 does not support the Mac OS?
It only supports Windows operating system load
Please confirm
Thank you
Prakash
No version of TestStand supports Mac OS.
-
Street of Microsoft and travel 2010
I have Microsoft Street and trips 2010. I'm doing 15 States with a light blue background. I don't want to draw around them and may not know how to do this.
Thank you.
Hello
Your Question is beyond the scope of this community.
Would be nice to want to repost your Question in this specific Forum for the Auto road, streets and trips and MapPoint.
https://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips
See you soon.
-
I have a MS streets and trips 2010 and can not send cards to other owners of MS Streets and Trips
I have a MS streets and trips 2010 and can not send cards to other owners of MS Streets and Trips
,
Check with the streets and the support of the TRIPS Agreement and its forums.
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I think that this may have been covered, but if anyone noticed all the differences in the properties of the ActiveX or methods in labview when working with excellent 2007 versus excel 2010? I know at one point Microsoft had changed a few things excellent 97-2003 "and instead select 'value' in your method, you must now choose"value 2". Is the real wait even for excel 2010? I am currently using excel 2007 at work and 2000 at home, and when I opened my code at home, my call nodes 'have the wrong son' still all required entries are correct. Same code on excel 2007; lot of son and the code will be run. I'm just curious to know if anyone has tried to use labview 2010 and excel 2010 together and made a work? I'm opening 1 workbook and wrote to 4 different excel sheets using Windows XP, excel 2007 at work and have windows 7 and want to use excel 2010 home and prefers no problem or to all the least know what are potential problems. Sorry if this confusion. I think it's the best way I can explain that I have MY head wrapped around it yet. I do not want to write the same code twice for different versions of excel. (write and test at home, then re - write at work)
http://digital.NI.com/public.nsf/allkb/177D720A428CA72B862567EC00757F0C
This is an example of what I'm talking about
Myke,
While I don't have excel 2010 available to try and see, Microsoft (and MSDN) has a huge amount of information about calls in all versions of Excel.
Excel 2010 development resources: http://msdn.microsoft.com/en-us/library/ee658205 (office.14) .aspx
Excel 2007 development resources: http://msdn.microsoft.com/en-us/library/bb979621(v=office.12).aspx
I hope that helps you start, because I don't have access to excel 2010. Let me know if it works for you.
Kind regards
Kyle Mozdzyn
Engineering applications
National Instruments
-
Can anyone help. I use Windows 7 and Microsoft 2010 (trial version).
Hi DonDonaldo,
1. what windows update did you install?
2. When was the last time you were able to install updates?
3. do you have security software installed on the computer?
Windows Update error80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003.
If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the section "Windows.NET Framework".
The .NET framework is a component of Windows that is used to build, deploy, and run programs and applications. Unfortunately, it may be damaged by some programs, viruses or hard drive problems.
To automatically repair the .NET Framework
1. click on this link:repair .NET Framework
2. in thefile download dialog box, click run, and then follow the steps in the wizard.
3. open Windows Update by clickingStart , all programsand then clickWindows Update.
4. in the left pane, clickcheck for updates, and then wait while Windows searches the latest updates for your computer.
5. If updates are found, clickinstall updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
If the previous steps do not solve the problem, you can reinstall .NET Framework manually, but the steps are intended for advanced users. If you are not comfortable performing these steps, ask a friend to help you. You will find the steps in the article toreinstall .NET Framework on the Microsoft Web site.
Microsoft Office 2003
To resolve this problem, you may need to restart the Office Source Engine (OSE) service and try again to install the latest updates for Office products.
To restart the Office Source Engine (OSE) service
You must be logged on as administrator to perform these steps.
1 open administrative tools by clicking theStart button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
2. double-click onServices. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. If theOffice Source Engine service is disabled, double-click it to open the service properties.
4. click on the listStartup type , click Automatic (delayed start), and then clickapply.
5. underService status, click Start.
Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643
You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
http://support.Microsoft.com/kb/903772
I hope this helps!
Halima S - Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
Language setting bad compile App with labview 2010 SP1
Hello
I got this when I create an application with LabVIEW 2010 SP1
My OS is a Windows XP English with a regional setting to English (Canada)
Y at - it a fix for this problem, that some were.
After a repair of my SP1 installing LabVIEW 2010 I had the correct behavior
I think something was wrong in the installation of runtime LabVIEW 2010
When I tried to add a new target under LabVIEW 2010 SP1, the PSC-2000 was not among the choices.
As the support NOR documents indicate, you need LV version 8.5.1 or earlier to program the cFP-20xx devices family. Version 8.5.1 of LabVIEW does not work under Win7. You will need Windows Vista or something earlier like XP.
Maybe you are looking for
-
How do I reinstall Thunderbird with minimum destruction to existing e-mail files
To save you time and effort, I read through the General procedure to reinstall Thunderbird (TB). In my case, however, found nothing which describes the procedure to the smallest detail, beyond ensuring backup / image content in my current profiles fo
-
This morning I upgraded to 10 FF of the previous version. It worked well. After start-up the computer mode sleep and by opening the home page of firefox, I was shocked to discover that none of my previous Add ons (extensions) were available, even if
-
Hello After manually delete older backups on my time Machine that is placed on a network drive with the cli command "delete... tmutil." I wanted to reclaim the free space using hdiutil compact (...). sparsebundle. But hdiutil always fails with the er
-
Touchpad of my 450 HP crashes automatically sometimes. My bumber product is C5Q25PA #UUF and my operating system is windows 8.
-
Error when you try to call the Javascript function in the ActiveX Web browser
I have a requirement to call a Javascript function in a web page that is displayed in the browser's ActiveX control. I have the control on the front panel, and I use the Navigate method to call to the top of the appropriate page. Based on an exampl