The VI "Set the position of the file" went 2010 SP1 for 2014
The VI 'Set the position of the file' has changed since 2010 SP1? I use 2014 and have converted the program of 2010 SP1 in 2014. It seems that the behavior is different, specifically with the default settings when not wired.
There is no change that I see. What is your problem? The function always set the default start position.
Tags: NI Software
Similar Questions
-
Original title: Windows File Protection Pop Up Message.
I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you
Hello
1. have you made any hardware changes or software on the computer before this problem?
2. when exactly you receive popup?Run SFC scans the computer and check.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, type the following line and press ENTER:
sfc/scannow
-
Error 2753 - the file is not marked for instalation
Hello
For a few days I am trying to install a program but keep on receipt of this message - "Error 2753 - the file is not cheap for instalation". I tried to solve the problem with Mr. Fix It but still nothing... Please helpHave what difficulties you tried it?
What program are you trying to install?
Is it just the program that to happen?You can try (re) install the latest installer of Windows version WindowsXP-KB942288-v3 - x 86 .exe from here: http://www.microsoft.com/download/en/details.aspx?id=8483
Note that you need to have SP2 or SP3 installed.Let us know if the same problem while trying to install that.
-
When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file. Help, please.
As I suggested previously, conversion to a format like
. WMV before you import it into Movie maker may be the solution.The free Converter from Microsoft can be a place to start:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
(runs under WinXP SP3 / Vista / 7)When you install the program...
Start Microsoft Expression Encoder 4
(Start / programs / Microsoft Expression /)
Microsoft Expression Encoder 4)On the "Load a new project" screen...
Left click... "Transcoding project '...When the program opens, click on... File / import...
(If at any time you get lost while browsing
the program of... to... Window / active Reset
Type or workspace... CTRL + SHIFT + R)Look for the file/s that you want to convert.
(If files do not appear... open the fall
window and choose... All files)Click (highlight) left the files and the left on the Open button.
You can see the files in the "Multimedia content" pane
In the right column... left click on the tab "Output"...
Open the drop directory window and choose an output folder.
(This is where you will find your converted file)On the left, click on the button "encode".
Wait... video encoding CPU intensive and can
be a slow process. It is always best if you do not have
multi-task while files are encoded.Now... try import you again. File WMV in Movie Maker.
More converters:
There are to many converters available on the net...
the following links are some examples. You can
need to experiment to find the best result.Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup270.zip<>
(FWIW... installation..., you can uncheck
'all' boxes on the last screen... even in this case, it may
install the Ask toolbar on your system)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag FFSetup270.exe out of the folder
and drop it on your desktop. To install left click.(2) Freemake Free Video Converter (freeware)
http://www.Freemake.com/free_video_converter/
(Windows XP / Vista / 7)(3) Koyotesoft Free Video Converter
http://www.koyotesoft.com/indexEn.html
(2000/XP/2003/Vista/Seven)(4) Sothink Free Video Converter
http://www.Sothinkmedia.com/video-converter/
(Windows XP / Vista / 7)(5) hamster Free Video Converter
http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
(Windows XP, Vista, 7)
(If you choose Custom Installation
You can uncheck additional modules you
do not want to install)(6) quick Media Converter
http://www.Cocoonsoftware.com/
(Win XP, Vista, Win 7 Home Premium)(7) SUPER © Simplified Universal Player Encoder & Renderer
http://www.videohelp.com/tools/Super
(the download mirror site is faster) (Windows XP / Vista / 7)(8) Xilisoft Video Converter
http://www.Xilisoft.com/video-converter.html
(not freeware but receives good reviews)
(Windows XP (SP2 or later) / Vista / 7)Good luck...
-
Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem
I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »
I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse
HelloThe drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.Step 1.You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
I would also recommend to check if there are Windows updates for this device.Step 2.Here is the link to download the latest drivers.
http://www.Microsoft.com/hardware/download/download.aspx?category=MK
Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.For more information see the links below.Automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problemsI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files
Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.
-
Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.
Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files
Let us know if you still experience the problem.
Kind regards
Meenakshi
-
I get an error msg when I try to open a file using adobe reader software. Error States: Adobe Reader could not open ' heels 2014 001.exe bmp because it is not a supported type, file or because the file has been damaged (for example: he was sent as an attachment to e-mail and has not been decoded correctly.).
I tried to send an email with attachments 44 and would not send the email. Ever since I tried to send this e-mail, I have been doing the error msg.
Anyone know how I can get this to work for me again?
Thank you, any help is greatly appreciated.
JoJo
The file you are trying to open is (you can see from the name) a BMP, PDF files no file. Adobe Reader can only open PDF files, just so stop trying to open it with Adobe Reader. The app, users of Windows for BMP files is painting.
-
I can't get the file number I need for the license transfer process. Help, please.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Get help from cat with orders, refunds and exchanges (non - CC)
http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 ) -
After typing password password protected document (ABSA) I get the following message: "Adobe Reader could not open 'index.html' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)" when I send the attachment to my husband that he can open it. P
Hi idwa,.
As I mentioned this file must be opened with the correct application. You will get the best understanding of your problem on this forum link: what is required to read the files .emc of ABSA bank
Kind regards
Ajlan Huda
-
When I tried to open the bought one of the files with Adobe Reader purchase ebook, he said
Adobe Reader could not open ' URLlink (2) .acsm ' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).
Adobe Reader can open PDF files; for the .acsm file, you need Adobe Digital Editions.
-
I had this problem of not being able to open some files in a couple of years ago and was finally able to fix it but I don't remember how. Any help would be grateful.
The following should help: error: Adobe Reader could not open ' * .pdf "because it is not a supported file type or because the file has been damaged (for example, it was sent as an e-mail attachment and was not properly decoded.) "
Please update this thread if your problem is solved.
Thank you
Shashi
-
The file is too large for the file system
While the installation of a new Virtual Machine or add a new hard drive to ESXi, I get and error message saying 'the file is too large for the file system. Could someone help to find out what it is and how to fix it?
What is the HARD disk that you want to add to your virtual machine?
It may be a problem with the block on your Lun size
1 MB = 256 GB
2 512 GB
4 MB = 1024 GB
8 = 2048 MB
-
Open the file on a PC for iPad
Is it possible to bind a document .pdf on my iPad 2 to a file on a PC that is on the same WiFi network? In other words: I have a document .pdf on the iPad, which contains links to files on the PC. Can I set up so that I can click on the link embedded in the .pdf and open the file on the PC? If so, how do I?
Essentially, I have a lot of music files on the PC, and I'd like to power their cue and play of the iPad. Is there a better way to do so, an application perhaps?
Any advice would be greatly appreciated.
Of course, there is an app for that: iTunes.
Use home sharing to share content with other devices - Apple Support iTunes
-
Download a file would normally bring up an option to open the file with the appropriate program or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else? It is very frustrating - sometimes, you want the first opened file so it can be discarded or stored in a different location.
Find the type of file in the Firefox -> Options -> Applications Panel, open its menu drop-down and select 'ask '. To reset all the actions of download, delete the mimeTypes.rdf file in your Firefox profile folder (or rename the mimeTypes.rdf X if you want to save as a backup). The file will be regenerated with all types of files, restore the default actions.
For more information, see application Panel - set how Firefox handles different file types and change what Firefox does when you click on or download a file .
Maybe you are looking for
-
Windows Mobile data transfer limit
I use LV 2011 and 2011 Mobile to transfer data wireless to a pocket to a PC computer. Program receiver to PC errors when a large part of the data need to be transferred to your handheld. Here are the details. There is a file of inventory on the handh
-
My volume is not openning! Associated with a Virus action!
Hey every1 My PC has been infected by some kind of virus or to that I don't know. I've been able to kicks, using Kaspersky PURE 9.0.0.192... Now the problem is that I can not open any drive volume as (C:, D:, E:...). These error messages appear when
-
Linksys EA9500: FTP issues
I recently bought and installed a Linksys EA9500 V1.1 running the latest version of the software package (1.1.6.173418). Overall, the router performs as advertised with almost an improvement of the order of magnitude of speed on my previous router n
-
I have an Officejet 5610 all-in-One attached forprinting and scanning. After that I bought this new computer, I'm not able to find the documents that I scan. Where are they going? Why are they so hard to find?
-
ERRORLEVEL lost during the passage of new cmd.exe command
Hello When I run the following commands in a command prompt errorlevel Windows 7 11 is returned: % ComSpec % /C "EXIT 11" & IF 1 EQU 2 DIR ECHO %ERRORLEVEL% 11 If I run the first command in a new cmd.exe I get errorlevel 0: % ComSpec % / c "% ComSpec