7zS175D file missing when installing HP photosmart printer.

Similar Questions

• "Error please make sure printer is connected to the computer" when installing HP Photosmart 5515.

  Original title: my HP Photosmart 5515 will be OK: print/copy/scan to memory card. BUT...

  Running Windows 7, new printer installation, I tried HP site and Instruction Book, uninstalled and Reinstalled.

  Same problem each print/copy/scan time.will memory card OK. BUT does not connect to my laptop to scan to the computer wireless or wired, it rises "year error occurred while scanning, please make sure that printer is connected to the computer.

  Hello

  Method 1:

  I suggest you run the automated FIXIT from the link below and.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I also suggest you to go through the steps mentioned in the link mentioned below and check.

  Scanning problems? Try the HP scan Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114802&cc=us&DLC=en&LC=en&product=5063608&tmp_track_link=ot_search#N97

  HP Photo smart 5510 and 6510 e - all-in - One Printer Series - a 'connection error' or "Computer no. detected" Error Message appears when trying to Scan from the printer control panel

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02917811&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=5159859&prodTypeId=18972

  See also:

  How can I get my PC to see my Photosmart printer of 5515 via my wireless network

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-do-I-get-my-PC-to-see-my-Photosmart-5515-printer-via-my/TD-p/1171265

• Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

  Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

  Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

  -Dov

• Photosmart C7280: Button INSTALL missing when installing printer S/W upgrade WIndows10

  The button INSTALL is missing during installation of driver/software to print a clean Win10 set at level - only OUTPUT is displayed.
  Downloaded HP current sotware for Win10/64 bit as well-, but it shows same last file downloaded in 2014? ; "PS_AIO_02_Net_Full_Win_WW_130_140.exe @ 319 452 KB"

  Run the file as an administrator - but stuck now.

  Thx for all the advice!

  Thank you very much for the advice - all sorted now

  I use Firefox and guarded by train until he crossed - HP needs to have a better system, but that this problem has existed for years and I don't meet with any other upgrades and reconstruction pc every two years... I can't get here from limited data plans and the downloading more than 1.5 GB for 1 stupid printer update is absurd.

  Can't find where to mark them as "accepted solution" according to the email tips?

  'Solution pastors '.

• audio.ar file is missing when install Midtown Madness

  Hello!

  I just got a copy of Midtown Madness Chicago edition, but I have a problem when I try to install it, I got this message Microsoft games\midtown madness\audio.ar is missing

  If I get this message the game installed fine, but when I tried to play it starts very well, he has shown the main menu and all when I chose any type of race he showed the page load then crash to desktop.

  Also, I installed the XP patch but nothing works.

  I don't know what to do or where I can find this missing file.

  Thank you for your help

  Javier

  Hi Javier,

  Please write us with the following details so that we can better help you.

  (1) what is the exact full error message you get?

  (2) is the issue limited to play Midtown Madness Chicago?

  (3) how you try to install the game? This is a disc to install the game?

  I suggest that you contact the support Microsoft Game. You can use the information in the link below.

   

  Support for common issues of PC games

  http://support.Microsoft.com/ph/7745

  Email us if you have any further questions. We will help you to come.

• Dsetup.dll file is missing when installing Borderlands.

  During the download and installation of Borderlands on my laptop that is running Windows 7, I get a missing Dsetup.dll message.  Any suggestions on what I can do to fix this?  I have re-installed Borderlands, and this has not fixed the problem.

  Hi Galdrak,

  You may receive this message if Dsetup.dll is missing or corrupted in the download file. I suggest you to re - download the installer to the border area and try to install it.

  Incase you are unable to install after redownload and make the same mistake, you may have to contact the manufacturer of game software to check if you can download the installer from another location and if it works fine. You can also check with them if they have any fix for the problem.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• So how can file formatting when installing printer, I return back to their original state.

  Original title: FILE FORMAT CHANGED AUTOMATICALLY AFTER the INSTALLATION of NEW SOFTWARE PRINTER HOW can I RETURN FORMAT ORIGINAL to RECORDS

  I just installed a brother p touch on my computer printer software and now all my folders automatically changed their format to account for the printer. who is a printer for adhesive labels. How can I get all my files back to their original format? I can do each an indivicually, but then, after closing the computer and re opening they come back to the new format of the thumbnail

  Thank you

  but finally managed to solve the problem

  tried to click on all the printers iconc

  except the one on the bar at the bottom of the screen

  from there I could change the default settng for printe

  new sticker fron brother printer

  to the old normal printer

  strange I couldn't do otherwise

• Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385

  Hello

  I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).

  However, during the installation, I get on a fatal error in the last step, "product Configuration".  I uninstalled and reinstalled several times with the same result.  As you can imagine, I am really frustrated and seeks help from the community to solve this problem.  Here is a screenshot of the error.  Your help in solving this problem is greatly appreciated.

  

  Hello

  I see that you have a problem with the printer.

  I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.

  You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.

  

  Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.

  Once its finish, you can go back and do the following installation.

  

  Let me know the results.

• Cannot start Windows 7 Print Spooler stops (0x000006ba error) when installing or uninstalling printer.

  This PC had a fairly recent reinstallation of Windows 7, then he started screening blue, run system restore a few weeks and works very well, but it will not be printed.  When you try to install a printer, it gives a 0x000006ba error code and says that failed to start the spooler.

  The spooler may start, but stops when you try to install the printer.

  So far, I have:

  ran sfc/scannow

  Re-registration of dll

  replaced spoolsv from the windows disk

  has run a few utility programs such as tweaking.com, UVK and combofix

  Chkdsk /r

  restored back as it would go

  remove the old printer

  drivers wanted and removed old print

  deleted registry entries

  shown ancient and hidden devices in the Device Manager and remove the

  and basically, did every challenge on the internet.

  Before I'm stuck reloading this machine again, I'd like to get some really advanced or random fixes that worked for you, when others have not.

  Thank you.

  Hello Kevin,

   

  Thanks for posting your question on the Microsoft Forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  What is the brand and model of your printer and your computer?

   

  Try it out below mentioned methods and see if it works for you.

   

  Method 1

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  You can also try running the fixit provided in the following Microsoft article.

   

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 3

  If the question is always persistent then it means either the print spooler service is missing or damaged, I suggest you run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

   

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• MSVCR120. DLL is missing when installing Photoshop elements 14

  I have my uncle gav a photoshop Elements 14 and said, ok, just install it and all is well.

  but after installtion, it gets the error:

  MSVCR120. DLL is missing, please reinstall the software.

  I supported this reinstall on Teamviewer, but the error is still there.

  I also installed files Redistribution of Microsoft for 64 and 32 bits, but the error remains the same.

  The system is Windows 7 64 bit - 4 GB of RAM

  So can you help me here somehow. Problem is that the Photoshop components 14 is brand new and there is no results when you do a Google search on this error.

  Thank you very much in advance

  Good bye

  Elmar

  Hi people,

  problem is solved,

  After re install Photoshop elements 14 a couple of times and also install the redistribution of files from Microsoft to have the required DLLs in the right directories.

  Then we checked the Panel to uninstall software system.

  We saw a couple of entries doubled installed redistribution files.

  It seems that reinstall adds an additional instance to your Windows System.

  So we have uninstalled the 2 not needed to proceedings

  A reboot and it works.

  So I hope that this information will help you too.

  So, when you get the error Ms... DLL is missing, check your system control panel to uninstall the software. If there is more than one entry for redistribution files (Microsoft Visual Studio 2012,2013... Libs). Get rid of duplicate entries, and then it should work.

  Good bye

  Elmar

• Device driver is missing when installing Windows Server 2008 R2 on PE 2850

  Hello

  My server using Centos 6 PE 2850 under the operating system. So I want to install a windows 2008 R2 server.

  When the installation menu, it shows 'Drive devices lack' as the picture below show:

  

  After I Googled, I found this link and try to follow his example:

  http://en.community.Dell.com/support-forums/servers/f/1466/t/19470587.aspx

  But I don't know why I can't hit CTRL-M to set up RAID during POST. Only CTRL - A for LSI Logic Configuration and CTRL-E for installation of BMC.

  Then I start to 2008R2 installation and I click on the RAID drivers. But it shows the message as below:

  

  

  Can someone help me solve this issue?

  Here my server spec:

  Material:

  Intel Xeon 3.8 Ghz dual core x 2 CPU

  8 GB Ram

  300 GB 3 10 k RPM SCSI HDD x

  Version of the BIOS A05

  Please let me know if the information is not enough

  Concerning

  If you do not have a prompt CTRL-M, of two things happening: 1) you have not installed hardware RAID to activate the controller RAID PERC 4e/Di (keys, battery, memory), or 2) RAID is not enabled in the BIOS.

  If you have hardware RAID, go in the Setup of BIOS (F2), on-board devices and set the onboard RAID RAID Enabled.

  You MUST first configure RAID before all disks will be presented to the operating system for installation.

  The device driver missing "CD/DVD' is because your installation media is corrupt.  Try different media, by downloading again, using a download manager to ensure the integrity of the files, check the hash, burning the ISO to a different rhythm, and/or using different software or hardware.

  THEN you need the drivers for the PERC 2008R2 in order to see the virtual disk created in the CTRL-M.  The drivers do not work now, because you have not enabled PERC, so, basically, the device you are trying to drivers over ot for does not exist.

• The behavior of copy (.png files) screen when using TextEdit and printing

  I have long used the method to copy and paste texts and/or pictures to TextEdit and print files .rtf or .rtfd below:

  I use the command-control-shift-4 and the cursor to select things and paste into TextEdit.

  That stopped working in the Sierra.  I tried several methods (PDF format conversion, fall in Pages and Numbers, for example), but nothing worked: the Canon PIXMA MX922 printed on a white sheet and left the box of small characters with text "filter impossible."

  There is no new printer driver on the Canon site; However, there is a new driver IJ Scan Utility and I downloaded it already after that installation of Sierra and the scanner works fine, as also directly print something (e.g. on the Web).

  Now, after several days of testing and I was wondering, I tried this yesterday:

  Instead of the above command, I used (which I do when I want to save it to the desktop) command + shift + 4.  I copied the file .png from office, dropped in the TextEdit, printed, and... IT WORKED.

  Copy and leaving fall directly in the TextEdit and printing, is so not working, but let fall the same screenshot on the desktop and copy and paste into TextEdit and it print shops.

  I noticed several other annoying problems to Sierra, some I've reported here (communities), some didn't.  Business-as-usual: first version of an upgrade is full of bugs, which 'disappear' in future versions, until a new update is made available, the loop continues, continues, and...

  He works here.

• Index.html file missing when I download Iweb site to go Daddy

  So, I built a website using Iweb.

  I downloaded on Godaddy using Fetch.

  The files are all there in the correct folder, but the site does not open.

  When the support of Go Daddy looked at the files, they said that the problem is the index.html file is missing.

  It is a compressed, file index.html.gz, but they are not familiar with it and this isn't in the right format to use.

  If someone else has had this problem and you know the solution? I tried to launch my site for 48 hours now.

  Support said that everything seems to be fine.

  Thank you

  It all depends on how you have downloaded from the site?

  Have you downloaded your site folder or just the contents of the folder of your site?  If you have downloaded the site folder, then you need 2 files to index - an index.html file will be inside the site folder and the other will be sitting outside pointing in.

  If you have just downloaded the content in your folder Public_html on GoDaddy, then you need an index.html file and that it is.

  Don't know how you got index.html.gz.  What you need is one or two files index.html and that's all.

  Republish your site new to iWeb to a local folder and check the files that have been produced and if the index.html file is there.  It should be, but there should be no zipped or other, just one or two files with index.html.

  They must be there.

  This is the first site you've built?  If so, why choose iWeb?  Not sure that this is an unsupported product that has not been updated for at least 6 years now?

  Remember to move on and using supported software.

• Photosmart HP 5510: How can I re - install my Photosmart printer without the cd that I did not

  I deleted my printer to the computer due to problems of wireless connection, but when I inserted the cd to reconfigure the printer, he came to the screen could not recognize 10 Windows. Can anyone help. !

  Hello

  Please download the software and the following drivers and save them on your computer: (can't remember where)

  http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-4/PS5510_1315-1.exe

  After that, right click on the downloaded file and select run as administrator.

  Kind regards.

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you