8 drive raid 5 or 50, and SATA3 vs SATA2

Similar Questions

• Driver RAID WXP Neer and CISS for my Satellite C650 - 10K

  Anyone know where I can find the driver Raid and CISS for my Satellite C650 - 10K?

  Hey Buddy,

  Are you sure you need to RAID or SCSI (not SSCI) for Satellite C650 driver?
  As far as I know this model doesn't support this type of material

  I think that you need drivers for the SATA controller. This package is called Intel Storage Manager and can be downloaded from the official website of Toshiba.

  Here is an interesting article on installing XP with SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• H200A PERC. SAS and SATA. Simple 2 extra HARD drives raid. Possible?

  Hello.
   
  Research in the server rack dell R210 II.
   
  Added records 2 x 300 GB SAS with a PERC H200A raid controller.
  The other two empty drive bays im looking to transfer courses two SATA 2.5 "HARD disk drives. Ive read you can mix SATA and SAS drives, is this true?
   
   
  I have two options to the raid configuration:
   
  the raid controller would be able to support two raid 1 RAID. 1 for the SAS drives and the other for the two SATA drives?   Operating system can see two disks.
   
  He would support a raid 1 for hard 1 & 2 discs.  Then with disk HARD 3 & 4 show the HARD drive directly on the server.  OS sees thre readers.  The drive in question and two others.
   
   
  I tried the dell chat, but could not get anywhere, as the helpdesk agent does not seem to know that you can google some caddy and buy the caddy to adapt to discs with no carts.

  [murmur] I'm wrong :), but I think the H200 supported not RAID, so if left unconfigured, the disks will be seen by the operating system as the person/no RAID disks.  Also, if I am wrong not :), the H200 supports a maximum of 2 virtual drives, so would not work two 1-disk RAID 0 and a RAID 1 (in fact, it probably won't allow you to create a single drive RAID 0 in all). [/whisper]

  http://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_dell_adapters/PowerEdge-RC-h200_User ' s%20Guide_en-us.pdf

  Sorry... I love you pc :)

• replacing a drive RAID 1 failure in PowerEdge T710

  I just got the disk(146GB) of replacement for one of the disks RAID 1 has failed. I would like to know what the best approach is to replace the defective with the new one (same size), now that the spare drive (300 GB) is used by the raid. I want to get the bigger drive and re - assign as a global hot spare, by the original configuration is possible without disconnecting the server?

  Here is my config:

  T710 Server (8 discs - 4 X 146 GB, 4 x 300 GB)

  PERC H700 integrated

  2x146GB drives - RAID 1

  2x146GB drives - RAID 1

  3x300GB drive - RAID 5

  1 x 300 GB disk - hot spare

  Thank you.

  This should work for you. What it will do is essentially the same process I described. When you insert the replacement drive and implement the Member to replace it will fail then the immediate replacement and then start reconstruction on replacement.

• Adding a new drive of 1 TB Adaptec2610SA and esxi 3.5.0

  Hello

  It's really confusing to me.

  I have a system that works for 2 years now.

  I have 2 drives raided and work in my esx 3.5.0 on my HP Proliant ML115 G5 server. I has been working perfectly without any problems.

  I wanted to add a few more storage so I boughty myself a whole new drive 1 TB and set everything off and put it in.

  Went up in the utility RAID at startup and makes sure that I could see, but not a not joining the existing raid array as I just wanted to use as 1 additional storage room.

  Anyway to cut a long story short, - punt in esxi, has launched the customer infrastructure and went to the storage adapter expecting to see here. NO.

  Therefore a new analysis and NOTHING.

  Put and old 40 GB drive to and bingo she appeared right. (this player may have been formatted, but that's the only difference I could think off the power)

  The new Terabyte disk in and nothing new.

  Any ideas.

  Y at - it sort of command line hardcore scan I can do to force his apperarance.

  Thank you.

  Neil

  Did you create a new table with the single disk. The controller do not know, but I think that you must have a table before being transmitted.

• RAID-understanding of"relief" and Windows reinstall - final stages

  Hi all

  If you follow the couple of my other recent threads here you will see that I have a warning of a disk failing in my 4 TB raid (raid set 4 x 1 TB).

  Also, for some reason unconnected with I also need to reinstall Windows 7.  (and of course my Adobe Master collection CS5)

  I ordered a player to serve as a 'Rescue' 5th and it will happen some time today from Amazon.

  I want to assure you do correctly, the above "final" steps in the right order.

  
  I based my "final steps" on the advice of harm on another thread:

  > > >

  You can never be too sure with data, but if you follow the rescue, extend the raid set and rebuild the sequence, it is not necessary. Your data will be automatically reconsructed. This is the reason why you use a raid3/5.

  Your log file is a specific show a serious disk problem. Replace it, create a hot spare, extend your raid and reconstruction (it should be done automatically) and you're ready to roll

  > > > >

  (As a precaution, I made a backup of my raid on an external drive)

  So once my new hard drive arrives today on Amazon, I will, in the following order:

  (1) Replace hard drive fault.  (I have to turn off the computer to remove the failed hard drive and replace it with the hot spare?  Or I can leave the computer on for software raid to continue his CONSISTENCY CHECK as HE do all the steps to rebuild the raid - see note at the bottom of this post...)

  (2) create the hot spare

  (3) use the (Areca) Raid Controller software to EXTEND the hot SPARE

  (4) raid rebuild (it should be done automatically)

  THEN, after I confirm the raid works fine, I'll

  (5) reinstall Windows 7.

  The step below is what I'm not quite clear on:

  (6) I guess that since the raid has been rebuilt {(avant j'ai fait le windows 7 réinstaller) I can do a very simple 'reconnect' for work already raid.}  In other words, I would like to reinstall the Areca raid software (using the cd of Areca) and identify the raid and windows 7 will recognize the raid 4 TB as my raid drive.

  I am tracking the delivery of my new hard drive and there are at least 5 or 6 hours of his arrival from Amazon.

  CONSISTENCY NOTE: I have time I'll have the Areca controller software based on the web to do a CONSISTENCY check of the raid.

  It is to halfway through control and found 144 errors so far.   Consistency checking is rather vague about what he does.  But can I assume it is to find errors and correct them automatically.

  Or what I need to do something to correct errors once the consistency check is finished (this is one of the reasons why I want to avoid turning off the power during the reconstruction of the raid).  Or create the hot spare, etc will interrupt the consistency checking, which means that I have to complete verification of consistency was completely before you rebuild the raid.

  Or should I give up the consistency checking and after do I have to reinstall windows.  (If possible I would like to do this so I can with my current project!)

  PHEW!

  Rowby

  Post edited by: rowby

  What happens when a disc falls down during a parity raid?

  RAID3:

  RAID3 uses a dedicated parity disk. When a disk in the raid fails, it can be a data reader or a parity. If a data drive fails and is replaced, the failure data must be restored by the remaining disks, especially from the parity disk. If the parity disk fails, all to do is to rebuild the data parity of original drive.

  RAID5:

  Used RAID5 parity distributed, so when a disk fails, data and parity must be rebuilt on this disc. He must rebuild the data from the other parity disks and then rebuild the parity on the other data disks. Which includes a treatment more complex in a raid3 and that is why reconstruction takes more time than in a raid3.

  Reonstructing the reader has no impact on the operating system and reinstalling the operating system has no impact on the raid. Just make sure that the raid is working properly and that you have the McRasid software available for installation.

• External hard drive says its read-only and wont allow any changes

  My IQ505a has an attached external USB drive which is a drive external drive USB Western Digital 3200JS, and for a reason that I am unable to make changes to the data on the disk because the system apparently marked the entire disk in "read-only" mode.

  I put my account as an administrator and belong to the Group of Directors with all the usual permissions, except that I'm unable to disabled marking read-only on this drive.

  I also tried to connect and make these changes with the administrator account, but nothing helped.

  This problem is only with the external drive and not on the embedded player.

  Any help would be most appreciated ith this issue frustrating.

  mclwlg

  NZ

  Concerning
  mclwlg - NZ

  Get on the Internet and found many others with external drives, Vista and this issue.

  Found this fix (solution?):

  Go to the computer, do a right-click on the icon of the drive, properties, tools, check now. Uncheck the two boxes and click OK.

• Driver chipset for A60-122 and Windows XP Pro

  Hi all.
  I'm trying to upgrade my Satatellite A60 - 122 win XP Home Edition to Win XP Pro.
  I downloaded the new version of the drivers that I need after the installation of operating system directly from the site, I also download and print the order to put them in my computer, but the first item is already a problem: THE CHIPSET UTILITY.
  First of all, I expect to supply the operating system with the Chipset driver, not utilities.
  Then I looked everywhere chiset driver, but nothing.
  I also called the Italian help asking about the Center. The only thing that they where able to give me was the code number which is ATRS250M + SB200-(1XP150); It's the only thing that the operator had, not even the name of chipset (intel I guess but which?) and it's not chipset name for sure.
  So... the question is:
  Where can I download the correct chipset driver? I know that www.intel.com is the answer, but what chipset is used in my notebook?
  Is the utility chipset drivers or not?
  Where they are... they do not work, as soon as I start, the program says that it has detected the wrong OS and then it closes. Well, I know that Toshiba loaded only the Home version, but...
  Can someone help me with this?

  Hello

  I can understand that you're a little irritated, but there is no reason for this. I hope that I can help you.

  First of all, I assume that you have the Tools & Utilities CD and there are all the drivers you need for your laptop. Do not download all the drivers. All the drivers on your CD should work with Windows XP Home edition Professional. Order of installation is important, but it is known to you. I don't know, but the order of installation is also described somewhere on this CD.

  What is interesting to me is what CD do you use to install the OS? Is this the full version of Microsoft?

  I must also say that you cannot wait you become a pilot with OS. OS and chipset driver are two different things, and they belong together.

  I repeat that you should not download anything. Install the OS and then install the display driver, chipset driver, driver sound and so on.

  Try again and if you have some problems let me know.

  Good bye

• "Driver Installation module stopped working and was closed" error nvidia

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  Why you post twice?
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172

  Recommended to follow only a single wire

• Laptop 15-AD129DS: installed Win7 on 15-AD129DS-lack of Driver: Acquisition of PC data and Signal Processing controller

  I recently installed Windows 7 on my laptop HP 15-AD129DS.  In the Device Manager miss me the driver for PC Data Acquisition and Signal Processing controller.   There is also an unknown device without driver right below in the section "other devices."

  I understand that this ususaly installed with drivers from the chipset.  But it didi not install in two different tests when installing Win7.  The Intel site seems to be of no assistance, or their driver utility.

  Can you lead me to the correct drivers?

  Thank you in advance,

  Mark

  Hello:

  Have you tried this driver?

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

  Graphic updates failed, two of the three listed.

  SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

  SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

  Pavilion m7750n

  Vista operating system

  NVIDIA GeForce 6150LE graphics
  Computer seems to work OK

  Someone at - it suggestions on how to correct these errors of installation of driver update?

  SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Display driver igfx has stopped working and recovered

  While playing the sims 3 the screen goes usually black then back to the game. then it goes black again and the game will continue once again, the screen is much darker. the darkness of the screen comes and goes and seems to pass the game of light to dark. Sometimes my computer just hangs. After I quit the game, a message appears saying: "display driver igfx has stopped working and recovered." What should I do to stop these pranks of the screen?

  Floop51,
  Take a look at this post: what to post in the forum games and then give us the details of your system and the operating system.   Given that this error is indicating your graphics card you can uninstall\reinstall the most recent driver.  Then clean restart your system and test.  Check the specifications of your video against the requirements of the game card.  If your card is at the very least, you may need to lower the resolution of the game.
  You can also check with the support of The Sims .
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to install Windows XP on the same drive as Windows 7 Ultimate and dual boot?

  I have the mini hp laptop... and it contains 3 discs... 220 GB for c drive, then 1 for recovery and the 3rd are tools HP (90 MB)...

  first of all, it contains windows 7 starter edition, now I move to button anytime upgrade ultimate, using...
  can I install windows xp without deleting windows 7?
  I want both xp and 7... What will I do?
  is this possible xp in the same drive c?
  pls help me...
  original title: windows xp installation

  If you are planning on running a Windows Anytime Upgrade to Windows 7 Ultimate, then it would make sense to download and install the FREE Windows XP Mode.

• I lost my product key of Windows XP. I had to wipe my hard drive due to the virus, and now I can't activate Windows because I lost the key.

  I lost my product key. I had to wipe my hard drive due to the virus and I installed win xp pro back. now, I can not activate my copy. This is the disc that came with the computer. its windows xp pro sp/2 from dell. I've tried everything I know using keyfinders and research on the disk. the keyfinders and drive both will eventually go wrong. What can I do next?

  original title: lost product key

  Hello

  Contact Microsoft telephone support on this.

  http://support.Microsoft.com/contactus

  For more information visit: How to replace Microsoft or hardware, packs software service to order and replace product manuals