8004E00F-COM + unable to speak of Microsoft Distributed Transaction Coordinator

Similar Questions

• Error 8004E00F-COM + unable to speak of Microsoft Distributed Transaction Coordinator

  Hello ALL-
  The displayed error message occurs when you are looking for performance of the system information in computer management.
  I use a processor of Pentium 4 Board MSI Windows 8 OS; No request for heavy trucks has been added.  So far, Windows 8 errors were the only things. Any guidance would be greatly appreciated!
  Thank you!
  Windows error messages are:
  -8004E00F-COM + unable to speak of Microsoft Distributed Transaction Coordinator
  -The event log may contain additional troubleshooting information

  Hi Umesh,

  Please provide the following information.

  When you get this error?

  I suggest you also check the observer of events at the time of the breakup.  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

  To access the event viewer in Windows 8:

  (a) go to the splash screen. Type in event Viewer .
  (b) this will bring up the box of eventViewer . Click to open Event Viewer.
  (c) in the left pane, expand WindowsLogs.

  Click Applicationlog . Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be information. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document. Copy the complete error message and paste it, so we check the full error message.

  I suggest you follow the steps in the link below.

  Note: before you perform these steps, please take a backup of the registry.

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  (Steps mentioned in the link can be used for Windows 8 institutions)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/8004E00F-COM-unable-to-talk-to-Microsoft/8066abfe-3396-4635-A900-7115e6d20448

  Alternatively, you can follow the steps below.

  (a) press Windows Key + E.
  (b) open the drive in which you installed Windows 8 operating
  System.
  (c) open the Windows folder. Go to the System32folder------Dtclog folder.
  (d) If a Msdtc.log file exists, rename it to Msdtc.old.
  (e) open Notepad , and then save a blank file in %SystemRoot%\System32\Dtclog\Msdtc.log.
  (f) press the Windows key + Q, type CMD.
  (g) right click on search results, and select run as administrator.

  (h) open a CMD prompt and type: msdtc - resetlog and press enter.

  Hope that solves your problem. We will help you more if you are faced with a
  Difficulty.

• Distributed Transaction Coordinator (DTC) 1073737712 service error code.

  Original title: MSDTC

  Cannot enable Distributed Transaction Coordinator - specific error code-1073737712. All solutions?

  Unless you need to use the DTC Service, I would set it to manual startup or disabled since there is no need to run all day doing nothing.

  Maybe you don't want to not have running or just want to be sure that it will start when you need to start without complaining, then in this case, read this:

  You try to start the Distributed Transaction Coordinator Service (MSDTC) you see a message like this:

  Windows could not start the Distributed Transaction Coordinator on Local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service special-1073737712 error code.

  Look for the events as a present to the Event Viewer Application log:

  Event type: error
  Event source: MSDTC
  Event category: Services
  Event ID: 4163
  Description:
  MS DTC log file not found. After ensuring that all resource managers coordinated by MS DTC have no indoubt transactions, please run msdtc - resetlog to create the log file.

  Event type: error
  Event source: MSDTC
  Event category: disk
  Event ID: 4185
  Description:
  MS DTC transaction manager start failed. LogInit returned error 0 x 2.

  Event type: error
  Event source: MSDTC
  Event category: devices
  Event ID: 4112
  Description:
  Not able to start the MS DTC transaction manager.

  Usually, this means that the file MTDSC.log is missing or corrupt in some way.  The MSDTC log file is usually here so take a look:

  C:\WINDOWS\System32\Msdtc

  To restore and create a new file, MSDTC.log, click Start, run and enter in the box:

  msdtc - resetlog

  Click OK and that will create a new file, MSDTC.log, then see if you can start the MSDTC Service and look for something like this in the case where the monitoring log Application:

  Event type: Information
  Event source: MSDTC
  Event category: disk
  Event ID: 2444
  Description:
  MS DTC is started with the following parameters:

  Security configuration (OFF = 0 and ON = 1):
  Network operations management = 0,
  Network Clients = 0,
  The Distributed Transactions using Native MSDTC inbound protocol = 0,
  Out of Transactions distributed using Native MSDTC = 0 protocol,
  Transaction Internet Protocol (TIP) = 0.
  0 = XA transactions

• Unable to connect to Microsoft Office Online

  I get an error "unable to connect to Microsoft Office Online" when you try to create a new template in Word 2007.  I'm running Vista 64 and Office 2007 SP1 - all program fixes are underway.  I am able to reference the help via Internet Explorer site.

  Take a look at your language settings.

  "The problem occurs because of problem specific to the integration of Office Online and Office 2007. "Suites Office 2007, products and applications that run with combinations of languages all over the world we English not localized are currently not supported by Office Online, aimed at American and British English.

  Impossible to connect to Microsoft Office Online for Office 2007 templates
  http://www.mydigitallife.info/2007/12/26/unable-to-connect-to-Microsoft-Office-Online-for-Office-2007-templates/

  http://www.Google.com/search?q=%22Unable+to+connect+to+Microsoft+Office+Online%22&RLS=com.Microsoft: * & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system. Any ideas?

  Original title: Microsoft. NET Framework 4 client for windows 7 X 64 profile base system

  I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system.

  Any ideas?

  Thank you.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand that you have a problem with the installation of Microsoft. NET Framework 4 client profile. I will certainly help you in this matter.

  Provide us the following information to better help you.

  • Have you made changes on the computer before this problem?

  • You receive an error message/code?

  Follow the below methods:

  Method 1:

  The .NET Framework 4 Client Profile is available on Windows Update
  http://support.Microsoft.com/kb/982670

  Follow the method 1 and method 2 in the article and check for the issue. If the problem remains same follow method 2.

  Method 2:

  Disable the .net framework Windows feature on or off, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn off .net framework, click the media feature. And the .net framework and click OK.

  c. restart the computer to apply the changes.

  Note: follow the steps above to activate or activate the .net framework and check if the problem occurs.

  For more information, refer to this link turn Windows features turn on or off:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Please let us know if you need more assistance.

  Thank you.

• I received an email from A Mr. Melanson, claiming to come from a group of Microsoft National Lottery. stating I won £500 000,00

  Original title: spam/email

  I received an email from A Mr. Melanson, claiming to come from a group of Microsoft National Lottery. stating I won £500 000,00. The return address is * address email is removed from the privacy *. I want to say that it is WRONG! & said rep is sentenced to a fine & bared, for the execution of this type of scam through your company!

  Yes, it's fake.

  You can write to * address email is removed from the privacy * and complain, but it is more than probable that
  address is false, and the mail comes by the way, then you would be wasting
  their time and yours.

  Just delete it.

  This was security-related, this link gives some ways to determine
  If she was genuine:

  http://www.Microsoft.com/Canada/athome/security/email/ms_genuine_mail.mspx

  "graham141" wrote in message news: 04c73ea3-Act-446 - 8 has 78-0a41e01d6ff8...
  I received an email from A Mr. Melanson, claiming to be of
  Microsoft National Lottery group. stating I won £500 000,00. The
  return address is * address email is removed from the privacy *. I would like to say that it is
  FAKE! & said rep is sentenced to a fine & bared, for the execution of this type of scam your
  company!

  Bill Sanderson

• "Are um problema com o Armazenamento Senha Avancado Microsoft WPD driver."

  OLA, venho tentado lately instalar some jogos bem surveys (MB) pro meu pc (HP Pavilion dv5). Ate ai tudo bem, mas quando o download esta na metade, meu pc reinicia e appears dead a Tela Azul. I tried verificar tudo than tivesse no meu pc wrong, e I found! Fled no local "devices e Impressoras" e vi that devices had um problema dentro no icon only owner computador (I triángulo amarelo). AI fled em solution of problemas e apareceu essa mensagem: "are um problema com o Armazenamento Senha Avancado Microsoft WPD driver.» Restore driver will o problema pode o. ». OK, fled 'Apply esta correcao' em, quando terminado, apareceu o Windows não pode'll o problema alegando o pilot tem um problema, e ao lado: "Nao corrigido.

  Como FACO pra restore um e o computador em TR driver? SEI as quando e uma impressora OU Máquina fotográfica e so remover o device e instalar novo, mas como CFFO quando o computador e o problema owner?
  Aguardo resposta,
  Abraço.
  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  
  

  Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link abaixo:

  
  

  
  

  http://support.Microsoft.com/common/international.aspx

• After downloading my Palm TX on my computer, I have been unable to synchronize with Microsoft Outlook 2003 what should I do to power have my sync schedule

  After downloading my Palm TX on my computer, I have been unable to synchronize with Microsoft Outlook 2003 what should I do to power have my sync schedule

  Help, please?

  Is it possible for you to display your hotsync log file?

  Message is about: Treo 800w (Sprint)

• Why Distributed Transaction error at the Message bean but not not Backing Bean?

  Hi guys,.

  * Update * I read the second post first.

  Using JDeveloper 12.1.2.0.0 and integrated WebLogic server of the same version.

  I have an ADF program where a draft of the application using JDBC in a message bean.  If I create an Application Module within the project and then sign in using its connection (java: comp/env/jdbc/MyAdfConnDS), then the code below works fine.  However, if I search connection JDBC (jdbc/MyJdbcDS), I have configured in WebLogic myself, then I distributed transaction errors.  How can I configure my JDBC connection to imitate the one who creates the AppModule?  This way I can run prepared explicitly stated and validation of the call?

  Here is my code JDBC

          conn.setAutoCommit(false);
          PreparedStatement statement = conn.prepareStatement(sql);
          statement.setLong(1, companyAccountId);
  // errors here
          statement.execute();
          conn.commit();
          statement.close();
  
  
  

  Which results in the error

  // prepared statement.
  DELETE BUSINESS_PARTNERS WHERE MASTER_TYPE_KEY = 'C' AND COMPANY_ACCOUNT_ID = ?
  java.sql.SQLException: Cannot call commit when using distributed transactions
              at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:373)
              at com.sample.myProduct.jms.clients.MyClient.deleteEntities(MyClient.java:211)
              at com.sample.myProduct.jms.clients.MyClient.importData(MyClient.java:155)
              at com.sample.myProduct.jms.beans.ImportMessageBean.onMessage(ImportMessageBean.java:91)
              at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:575)
              at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
              at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:375)
              at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4855)
              at weblogic.jms.client.JMSSession.execute(JMSSession.java:4529)
              at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3976)
              at weblogic.jms.client.JMSSession.access$000(JMSSession.java:120)
              at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5375)
              at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:550)
              at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
              at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
  
  
  

  Here is a screenshot of all the available drivers: www.williverstravels.com/JDev/Forums/Threads/3544909/drivers.png, as well as the configuration of the transaction screen www.williverstravels.com/JDev/Forums/Threads/3544909/config.png

  I've tinkered enough to feel quite strongly, it is not an error in coding, but rather something in Weblogic.  I read what I can, but I don't know how the AppModule creates connections.  I would not add an AppModule just to retrieve its data source / login information if I don't.

  Ideas?

  Obviously, your message bean is configured to participate in a global transaction (for example, a JTA transaction). It is a behavior of the default message bean, even if you have not explicitly configured. When you get and use a JDBC connection in your message bean, this connection is attached to and participates in the overall transaction message bean (because you used compatible driver Oracle XA, it is seen on the 1st screenshot in your post), so you cannot perform local validation on the JDBC connection.

  Commit / rollback in this case can only be performed on the overall transaction (if the message bean is configured with the transactions managed by container) to be automatically or manually on the UserTransaction object (if the message bean is configured with bean-managed transactions). In other words, you must remove the conn.commit () statement, which is erroneous and obsolete when it is used in your message bean. If the message bean uses transactions managed by container, the container will commit / rollback automatically at the end of the method all the resources involved in the overall transaction (including your JDBC connection). If the method completed successfully (without exception), a validation will be performed. If the method fails (i.e., it ends with an exception), a cancellation will be made. If the message bean uses bean-managed transactions, the transaction is committed/restored when you explicitly call UserTransaction.commit () or UserTransaction.rollback ().

  The code above worked in a managed bean because JSF, ADF BC or ADF Faces applications require and participate in JTA transactions, then your JDBC connection has not been attached to a global transaction and you were able to perform local validation on the JDBC connection.

  You have two options to solve the problem. It depends on if you want your operations of JDBC to be in a global transaction with the bean of the message itself and its other actions or not. If they must be in a global transaction, then just remove the conn.commit () statement from your code. If they shouldn't be in a global transaction, you must either configure the message bean not to participate in global transactions or to configure the data source to use the «of the (thin) Oracle driver...» "instead of"Oracle (XA Thin)... driver. " ». (Remember to score the DataSource DO NOT to participate in a global transaction in the 2nd page of the data source configuration dialog in the management of WLS Console).

  NB. I highly recommend that you keep the global transactions. If you choose not to use a global transaction, it can happen that you committed the JDBC operations but an exception that happens after that, so the JMS message is not removed from the queue of messages and it will be processed after that, which causes the same operations of JDBC to be played and committed twice which must be avoided.

  Dimitar

• Any distributed transaction name

  Hello!
  
  Can you please explain on the DISTRIButed transaction?
  What is the < Second_word > in alertlog messages
  DISTRIB TRAN < SID >. < Second_word >. < address >
  
  Thank you!

  Paul,

  I think you're looking at the link below:
  http://blogs.Oracle.com/DB/entry/oracle_support_master_note_for_troubleshooting_managed_distributed_transactions_doc_id_1006641

  In one example, it is said:
  DISTRIB TRAN DB102D.UK.ORACLE.COM.ea27958e.9.46.338

  Means:
  GLOBAL_TRAN_ID: DB102D.UK.ORACLE.COM.ea27958e.9.46.338

  DB102D.UK. ORACLE.COM = DATABASE
  DBID = ea27958e
  9.46.338 = LOCAL_TRAN_ID

  Concerning
  Girish Sharma

• Distributed Transaction bug in 12 c Managed pilot?

  I posted previously in Oracle Services for MTS, but I think it's actually more relevant here.

  Attempts to open multiple connections in a result of the Transaction in ORA-12514

  Using a simple call to TransactionScope I was trying 2 different connections in a distributed transaction that provides a single point of success or failure for several operations of the self.

  From the second connection open, bang - ORA-12514, occurs a completely misleading mistake, but take the transaction out of the equation, and it does not, if something was clearly at stake.

  This morning, I put across the right code back to basics to add a simple test:

  using (var ts = new TransactionScope(TransactionScopeOption.RequiresNew, new TransactionOptions {IsolationLevel = IsolationLevel.ReadCommitted}, EnterpriseServicesInteropOption.Full)) {
   using (var oc1 = new OracleConnection(_connectionString)) {
         oc1.Open();
         using (var oc2 = new OracleConnection(_quartzString)) {
            oc2.Open();
         }
   }
}

  
  

  The same issue has occurred.  Then I downloaded ILSpy to view the c# language for the Oracle driver, and that's where I noticed that connection pooling seemed to be at the heart of the issue, although she has not commented on it is pretty hard to follow exactly what is happening.

  From what I could tell, when a connection is opened it checks to see if a transaction is running and if so, consult a dictionary of connection strings based on the local identifier of the transaction.  What seems to be the problem, is that which is not allowing new connections being created and added, where it breaks down.  Then I re-tried the same test, but opened and closed the second connection outside the trial * before * creating the transaction like this:

  
  

  var oc3 = new OracleConnection (_connectionString);

  OC3. Open();

  OC3. Close();

  using ()var ts = new TransactionScopeTransactionScopeOption. (), RequiresNew , new TransactionOptions {IsolationLevel = IsolationLevel. } ReadCommitted { }, EnterpriseServicesInteropOption. Full )) {
  to ()var oc1 = new OracleConnection()_connectionString)) { }
  oc1. Open ();
  using (var oc2 = new OracleConnection(_quartzString)) {
  OC2. Open ();
  }
  }
  

  }

  
  

  and guess what - it works... so it looks like there is a problem with connection pooling.

  All my values for the connection are default usual bar (source of data, password) and user id.

  I do not specify a minimum pool size, etc..  I then tried to play with the attributes of the connection pool, but no cigar.

  Turns to me as if it was to see the connections available at the point of the transaction with the context begins registration of connections, but it's probably not good.

  
  

  Someone else had the same experience or a solution?  I was wondering if I'm going to pre-fill connections whenever I want to do a transaction... will try and enable tracing then so I can see the pilot done and why.
  

  You can use SERVICE_NAME instead of SID? If it works, it's confirmed it's the same bug (and you have a work around).

  In fact, I don't think that anyone outside the Oracle can see this particular bug. This bug was discovered in internal tests. These bugs are not publicly exposed as the vast majority occur in the pre-production software, which customers has access to.

  This bug has been recently fixed and merged into the main code line. I don't know that it will be picked up by ODAC R4 12 c due to the timing. However, it should be in an upcoming patch.

• ORA-02074: cannot DEFINE NLS in a distributed transaction

  Short - installation of pre-production

  After Doc ID 1683074.1 for installation quick config, executing a link ' run charts ' task errors and clover logs show the error below:

  08-18 15:08:01, 654 execution [WatchDog] ERROR WatchDog 96200 chart completed with error

  08-18 15:08:01, 658 WatchDog [WatchDog] ERROR 96200 node SET_SESSION_LANGUAGE completed with status: ERROR caused by: ORA-20001: Oracle - 20001 error: ORA-20001: 2074-Oracle error: ORA-02074: cannot DEFINE NLS in a distributed transaction

  has been detected in fnd_global.set_nls.set_parameter ('NLS_LANGUAGE', 'AMERICAN').

  has been detected in fnd_global.set_nls.

  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72

  ORA-06512: at the 'APPS '. FND_GLOBAL', line 271

  ORA-06512: at the 'APPS '. FND_GLOBAL', line 1575

  ORA-06512: at the 'APPS '. FND_GLOBAL', line 1603

  ORA-06512: at line 1

  08-18 15:08:01, 658 [WatchDog] WatchDog ERROR 96200 node SET_SESSION_LANGUAGE Error Details:

  java.sql.SQLException: ORA-20001: Oracle - 20001 error: ORA-20001: 2074-Oracle error: ORA-02074: cannot DEFINE NLS in a distributed transaction

  has been detected in fnd_global.set_nls.set_parameter ('NLS_LANGUAGE', 'AMERICAN').

  has been detected in fnd_global.set_nls.

  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72

  ORA-06512: at the 'APPS '. FND_GLOBAL', line 271

  ORA-06512: at the 'APPS '. FND_GLOBAL', line 1575

  ORA-06512: at the 'APPS '. FND_GLOBAL', line 1603

  ORA-06512: at line 1

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

  at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:193)

  at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1033)

  I discovered the problem.

  I thought he should be a configuration of data source problem. During installation, for some reason, the ebsdb data source is not created on the server of clover, so I added it.

  It's the driver being used. I used the default is generic.

  I've updated the data source "oracle.jdbc.OracleDriver" and restarted the server.

  Looks like it will work now.

• ORA-01591: lock held by string of uncertain distributed transaction error

  Hi gurus,
  
  I get the error message
  ORA-01591: lock held by string of uncertain distributed transactions error during the execution of a procedure.
  
  Procedure basically inserts 2 tables and update the 1 table.
  The order of execution is given below.
  However, I get the error as table is locked.
  Can you help me please how to handle this?
  
  
  Begin
  
  Insert into values table_a (nominale1, value2); -(our database)
  
  Insert into table_b@remote_DB values (Value1, value2); -(DISTANCE DB)
  
  Update table C; -(our database)
  
  commit; -When I debugged I get exception with the above sql error in this validation.
  
  End;

  Tina wrote:
  Hi gurus,

  I get the error message
  ORA-01591: lock held by string of uncertain distributed transactions error during the execution of a procedure.

  Procedure basically inserts 2 tables and update the 1 table.
  The order of execution is given below.
  However, I get the error as table is locked.
  Can you help me please how to handle this?

  Begin

  Insert into values table_a (nominale1, value2); -(our database)

  Insert into table_b@remote_DB values (Value1, value2); -(DISTANCE DB)

  Update table C; -(our database)

  commit; -When I debugged I get exception with the above sql error in this validation.

  End;

  01591, 00000, "lock held by in-doubt distributed transaction %s"
  // *Cause:  Trying to access resource that is locked by a dead two-phase commit
  //          transaction that is in prepared state.
  // *Action: DBA should query the pending_trans$ and related tables, and attempt
  //          to repair network connection(s) to coordinator and commit point.
  //          If timely repair is not possible, DBA should contact DBA at commit
  //          point if known or end user for correct outcome, or use heuristic
  //          default if given to issue a heuristic commit or abort command to
  //          finalize the local portion of the distributed transaction.
  

• Link Oracle to the Distributed Transaction

  In my application, I have to integrate the system into two (or I would say two separate instances of Oracle databases) through a Java program.
  
  Program to copy data (about 100 records/hour) of an Oracle database instance and the same transfer to another instance of Oracle and Vice versa. Given that this is going to be a lot application stand alone, I thought using the transaction manager distributed as JBOSS TM to control the distributed transaction.
  
  East - the right approach? Or can you suggest a better alternative for this work?

  853627 wrote:
  I agree with your explanation link Oracle, and Yes, it would be ideal to have in this case. For some reason, I have to use the means of Java.

  Why I am using the distributed transaction because I'm following some steps to iterate:

  (1) read A database data,
  (2) move the data to the database B
  (3) after the successful execution of step 1 and 2, there is another table in the database to where I need to mark that some records were migrated to the database "A" to "B".
  (4) after that, I have to update a table with details of migration: number of records to read, end when this routine, any error validation in documents etc...

  Distributed transactions require some complications and level database support.

  But I don't see anything that suggests you need.

  First step is to no basic transactions.

  Single point of failure is between 2 and 3/4. And I suspect that you could handle this with a follow-up to a table.

  (1) start transaction, read data from database A, updated follow-up table, end transaction.
  (2) move the data to the database B
  (3) start Transaction
  (4) after the successful execution of step 1 and 2, there is another table in the database to where I need to mark that some records were migrated to the database "A" to "B".
  (5) (has, without doubt) after that, I have to update a table with details of migration: number of records to read, end when this routine, any error validation in documents etc...
  (6) clean the tracking table
  (7) to complete the transaction.

  If there is a failure, then use the follow-up of knockouts correction table.