80070490 and error codes 8E5E0147
When I try to update windows, it will fail. I get codes of error, as shown in the title. I've been troubleshooting with microsoft unsuccessfully fix. I use 32-bit Vista sp2. If someone could help I would be extremely grateful.
I think that this problem could have existed some time. I thought I had better speak that I also try to remove the 2 spyware from my computer just in case there might be a link, although their appearance took place a few days before. (omiga-plus and research protect)
Thank you very much for reading this message
Chris x
Welcome & thank you for your comments. Mark one or more of my previous posts as RESPONSE will officially close your thread.
PS: Wouldn't mind a USEFUL vote while you're there either.
Tags: Windows
Similar Questions
-
The update of Windows KB2871690. 80070490 and error code 800F0922
8.1 SP1 64-bit Windows
Windows Update lists KB2871690 of important updates.
However, he is unable to automatically install: error code is 800F0922
Runs the tool in troubleshooting Windows Update detects and solves the following problems:
Error Windows Update Database that can be found 0 x 80070490
Windows Update components and need to be repaired.
If I can 'Try Again', Windows Update then returned "updates have been installed - not not necessary: 1 update.
But if I check updates, KB2871690 is still listed as important.
I tried to install after a clean boot with AVG disabled.
Then I tried manually install the update. KB2871777 is already installed, and I get the message "this update is not applicable to this computer".
Everyone tells me if this update is required on my computer, how to install it properly or why the update won't are removed from the list of important updates?
Kind regards
Neil
See if you manage to install Win8.1. Assuming that all goes well and after restart, run a manual check of updates & see if KB2871690 is still available.
-
Error code 8E5E0147, impossible to get Windows Update to work
When I try to download windows updates I get the following error code: "8e5e0147" and none of the updates will be installed. I now like 15 important updates.
I already searched this forum and other forums of solutions, but none of those I've tried seems to fix the problem. That's what I tried:
- Disabled Antivirus and firewall software
- Tried to install updates and
- Manually install the updates by microsoft download. This give me an error code, just "failed to install".
- Run a checkdisk, no errors.
I would be really happy for more information, which will solve this problem for me. It is very annoying. It is the system that I use if that would be any help:HP Pavilion dv 7 laptopWindows 7 Edition Home Premium x 64Intel Core i7Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves.
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.
5 reset IE8 settings advanced by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings [trust me]
6. open IE8 32 bit (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]
7 restart once again & test.
Note: Make sure you can update MSE manually. If you can not, you have a bigger problem on your hands.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
17 updates failed: Error Code 8E5E0147
For weeks now, I've had these updates accumulate on me my computer will not install and gives me error code 8E5E0147.
I don't know exactly what information I need to display with it, but I have Windows Vista Home Premium 32-bit operating system.
Help, please! Let me know if you need more information.
Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. right click on the file that you saved in step #1 above, and then select run as administrator. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".
8. If you have had problems with Internet Explorer 7 or 8, perform a reset now:
Vista: http://support.microsoft.com/kb/923737
Win7: http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings
8B. If you have had problems with Windows Update, now run a reset:
How to reset the Windows Update components?
[Ignore the section to APPLY to, if a Win7 user;] Run the difficulty in the default and aggressive modes]
http://support.Microsoft.com/kb/971058NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.
9. restart & test.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Update error Code 8E5E0147
original title: 8E5E0147 error Code
I get an error code 8E5E0147 when im trying to update
when im trying to update, an error code 8E5E0417 keeps coming back. its only 1 updated. the update is for the update of cumulative security for windows internet explorer 9 for windows vista KB2586448, I had this problem shortly after downloading Microsoft Security Essentials
Rename the Software Distribution folder:
Click on the Menu start > type %windir% , and then press 'OK '.
Find the folder C:\Windows\SoftwareDistribution
Right click the C:\Windows\SoftwareDistribution folder and then right click > rename
Type SoftwareDistributionOld press 'ENTER '.
Click Start type cmd (you should see the command prompt fill up) right click and select run as administrator
Inside the command prompt, type sfc/scannow
* Information about the System File Checker
http://support.Microsoft.com/kb/929833>
Access the KB971058 article through Internet Explorer (only)
Click here: reset Windows Update components and run the fix it 50202? default and aggressive mode.
http://support.Microsoft.com/kb/971058>
http://answers.Microsoft.com/en-us/IE/Forum/IE9?tab=unanswered >
Update cumulative security for Internet Explorer 9 for Windows 7 ( KB2586448 ) systems
You can search every download and manually install update Cumulative security for Internet Explorer 9 for Windows 7 x 32 or x 64 based.
for example,: http://www.microsoft.com/download/en/search.aspx?q=KB2586448>
Save the update to a location on your hard drive, you can find and then install the update from there.
Download, *Save* and install update Cumulative security for Internet Explorer 9 with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non essential processes in the Task Manager.
I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.
When it is downloaded right -click on the file and select run as administrator from the menu.
UTC/GMT is 13:34 Tuesday, November 1, 2011
-
Windows Update error code 8E5E0147 when installing KB968930 update
I have windows vista and when I try to install update KB968930, I get the Windows Update error code 8E5E0147. Nothing seems to fix this error. Any suggestions?
Hello
There could be various reasons for the updates to fail. No matter what security software installed on the computer may crash or services related to the programs installed on the computer. Also if there are corruptions in the files\folders related to Windows updates.
Reset update components would actually try fixing the part of corruption by recreating these files and also to re-register the files necessary .dll (Dynamic Link Library).
http://support.Microsoft.com/kb/968930
Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.
Temporary disable the firewall/security settings and check if it makes a difference.
http://support.Microsoft.com/kb/283673
Do allow him back course so that your computer is protected.
Method 1: Reset Windows Update components.
Log on as administrator.
a. visit http://support.microsoft.com/kb/971058
b. click Microsoft fix and run successfully.
c. restart the computer once the tool is run.Method 2: I recommend you perform the clean boot.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
For more information, see the following link below:
http://support.Microsoft.com/kb/2509997Hope this information is useful.
-
Error code = 16600 and error code = 17110
Error code = 16610 and error code = 17110
The child's account cannot check e-mail.
Your account is not ready.
It seems that your mother has finished setting up parental control for your account settings. Click "Access the parental control settings" to complete the process and access your account.Hotmail Setup incomplete.
Sorry there was a problem to apply your parental control settings to your Hotmail account. Try again later, go to your Hotmail account and follow the instructions.
Parent cannot delete the account:
Colton: Sorry, the service is not available now. Please try again later. Error code = 17110.
Colton: Your child Hotmail can not change immediately. We can send you a link to change the Hotmail settings, or you can try again later. Error code = 16600.
Family safety is NOT installed.
Primary school/Parent = account * address email is removed from the privacy *
Child account = * address email is removed from the privacy *
Does not work below:
When you remove your child from the parental control, your child's Hotmail settings could not update. We are sorry for this topic.
Update your child's Hotmail settings:
1. ask to connect with their Microsoft account.
2. ask to go to https://familysafety.microsoft.com/krl/hmnotify.aspx?p=OmaCuA3IIiM8WtcicpmFoCHjiR6rsa1 * oDgqRar4GKA6vMBO % 5EsudS % % 5EXf3ZQHYe 5Ep and follow the instructions on the screen.
If your child cannot always use Hotmail, please wait a few minutes and try again.
Thank you for using parental controls.
Hello
Please ensure that you use the latest version of the parental controls of Windows (16.4.3505.0912) for the child's computer. You can download the latest version in the link below:
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home
Please let us know if the problem persists after you have installed the client.
Thank you!
-
Update_dt000 Windows and error code oX80072efe
Seven days ago (15/11/2010), I am unable to check the updates of Windows. I get the following message: Windows Update_dt000 and error code 80072efe. I can't update the my virus definitions, malware and software Microsoft Essentials spies either. I scanned my computer with Microsoft Security Essentials and McAfee, and no viruses or malware were detected. * I downloaded manually the latest definitions to Microsoft Security on 11/22/2010. Even after the last definitions of installation, I was unable to automatically check for updates. Help, please!
Hello
A rootkit has been known to cause this problem.
TDsskiller (Rootkit removal tool)
http://support.Kaspersky.com/viruses/solutions?QID=208280684Then, restart and check the updates.
To search for other malware use this scanner:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx==================================================================
If necessary:
Run 1 SFC
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html------------------------------------------------------
Try this: (it is Advanced B method in the Article below)
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
At the prompt, type or copy and paste:
netsh winhttp reset proxy
(Press enter)
See if the update works now.
--------------
Then check out this article:
Update to install updates<-- check this="">-- check>
http://support.Microsoft.com/kb/836941Do these two and try updates
Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
Server 2008 R2 Release Candidate for Windows 7 Release Candidate
http://support.Microsoft.com/kb/947821/How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058=============================================
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?
Hello
You are unable to download the updates?
Try the following steps to resolve the problem:
Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.
Check out these links:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Update fault of maintains and shows 80070643 and error codes A 80071, 91
I keep trying to update windows rum for the "Security Update for Windows 7 for x 64 systems" and similar updates, but they keep failing to update and display 80070643 and error codes A 80071, 91. Troubleshooting is not helping me to solve it. Help, please.
Sean1420,
You can download the update on your computer and then install it directly from there. I would say that the execution of a clean boot before you perform the installation. Post back with the Info requested PA wear and results trying to manually install the update.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: window update problem.
Error code: 80246008 error Code 0 x: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 what its means? And how to solve this problem to?
(merged thread)
Hello
Did you do any hardware changes or software on your computer before this problem?
You can follow these links & check if it helps:
Hope the helps of information.
-
When the updates of windows I get and error code for 643. How can I fix it?
When the updates of windows I get and error code for 643. How can I fix it?
When the updates of windows I get and error code for 643. How can I fix it?
Here is an answer which is marked as an answer to the error code 643.
I also participated in that thread, and I gave my suggestions.
-
my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt.
Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
Reset
See if that solves the problem.
If not, run the update http://support.microsoft.com/kb/947821system tool >
02:42:25 amUTC 23/08/11
-
Windows Update error code 66A and error code 8007652
error code 66 has and error code 80070652 I know very little computers simple help would therefore be a more complete help, have had an error code 66A for awhile and looked for answers and said to go to net customer profile 4 and do a repair, I tried to do, but he says that there is another current installation , but I was not doing something so I turned off my computer and then tried it again same message has come now I have more updates and now I have more that won't install, I'll be very full for any help, thank you
Just to pass the 2 former responses of this forums MS Ansers on the error code 8007652Answer from:
Justin, Engineer Support, moderator
Date: April 7, 2009.Vista update error message
80070652Robin Walker [MVP] posted on Monday,
May 14, 2007 03:0480070652 means that a precedent
installation does not run successfully till the end.Try start-> Microsoft Office-> Microsoft Office-> Microsoft Office Diagnostics Tools
to see if that clears the problem. You may need your installation CD Office 2007 -
Has taken knowledge of these warning and error codes: DF029, DF024, DW063, DR011 and DW050. How should I aproach. Help, please
Hi Corando,
This might help: Installation error DW050, DW020 | CS5.5 | Windows
Kind regards
Sheena
Maybe you are looking for
-
I have Firefox, but when I click on the icon to start FF, it immediately pulls off the coast to the right of the screen, making it unusable. Don't click on anything except the icon to open or close it. Tried to reinstall, get a message parameters can
-
I just reinstalled XP Pro on a nc8230. Everything works, but in Device Manager, I got some yellow markings for Mass Storage, network controller and Simple PCI Communications. I had a lot more but I was able to fix them. I don't know what drivers t
-
Ho una request a voi, tutte volte quando apro it google chrome carica lentissimo (ho cercato malware i e con i vostri programs spyware, pero' sempre uguale, lento e) rate dovo cosa?
-
Can not install updates because of unknow error 8024 A 006. Help, please
-
Hello I have a file of database in my resources folder. I would like to use it in my application, how do I access this file in the application in the resources folder or should I copy it to SD card? If so, how can I copy the db on the SD card? I trie